Kamila Wawrzyniak-Guz

An appropriate velocity model from well logs is a key issue in the processing and interpretation of seismic data. In a deep borehole located in the central part of the Polish Outer Carpathians, the sonic measurements were inadequate for seismic purposes due to the poor quality of data and gaps in the logging. Multiple regression (MR) and a modified Faust equation were proposed to model the velocity log. MR estimated the P-wave slowness as a dependent variable on the basis of sets of various logs as independent variables. The solutions were verified by the interval velocity from Check Shots (CS) and by the convergence of synthetic seismograms and the real seismic traces. MR proved to be an effective method when a set of other logs was available. The modified Faust method allowed computation of P-wave velocity based on the shallow resistivity logs, depth, and compaction factor. Faust coefficients were determined according to the lithology and stratigraphy divisions and were calibrated with the use of the velocity previously determined in the MR analysis. The modified Faust equation may be applied in nearby old wells with limited logging data, particularly with no sonic logs, where MR could not be successfully applied.

More than 70 rock samples from so-called sweet spots, i.e. the Ordovician Sa Formation and Silurian Ja Member of Pa Formation from the Baltic Basin (North Poland) were examined in the laboratory to determine bulk and grain density, total and effective/dynamic porosity, absolute permeability, pore diameters size, total surface area, and natural radioactivity. Results of the pyrolysis, i.e., TOC (Total Organic Carbon) together with S1 and S2 – parameters used to determine the hydrocarbon generation potential of rocks, were also considered. Elemental composition from chemical analyses and mineral composition from XRD measurements were also included. SCAL analysis, NMR experiments, Pressure Decay Permeability measurements together with water immersion porosimetry and adsorption/ desorption of nitrogen vapors method were carried out along with the comprehensive interpretation of the outcomes. Simple and multiple linear statistical regressions were used to recognize mutual relationships between parameters. Observed correlations and in some cases big dispersion of data and discrepancies in the property values obtained from different methods were the basis for building shale gas rock model for well logging interpretation. The model was verified by the result of the Monte Carlo modelling of spectral neutron-gamma log response in comparison with GEM log results.

Seismic attributes calculated from full waveform sonic log were proposed as a method that may enhance the interpretation the data acquired at log and seismic scales. Though attributes calculated in the study were the mathematical transformations of amplitude, frequency, phase or time of the acoustic full waveforms and seismic traces, they could be related to the geological factors and/or petrophysical properties of rock formations. Attributes calculated from acoustic full waveforms were combined with selected attributes obtained for seismic traces recorded in the vicinity of the borehole and with petrophysical parameters. Such relations may be helpful in elastic and reservoir properties estimation over the area covered by the seismic survey.