Lijuan Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lijuan Zhang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Jinhua Lu
State Key Laboratory of Solidification Processing, Carbon/Carbon Composites Research Center, Northwestern Polytechnical University, Xi’an, China
2 shared publicationsYan Wang
School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an, China
2 shared publications- Yan Wang
School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021, China
2 shared publications - Haichen Yuan
School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021, China
1 shared publication - Hangyang Li
School of Materials and Chemical Engineering, Xi’an Technological University, Xi’an 710021, China
1 shared publication Jianfeng Wei
State Key Laboratory of Solidification Processing, Carbon/Carbon Composites Research Center, Northwestern Polytechnical University, Xi’an, 710072, P. R. China
1 shared publication
Latest Publications
- 23 September 2024
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 39 (5) , 1087-1092
Pyrolysis of Copper Phthalocyanine as Non-noble Metal Electrocatalysts for Oxygen Reduction Reaction
- 23 September 2024
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 39 (5) , 1087-1092
Pyrolysis of Copper Phthalocyanine as Non-noble Metal Electrocatalysts for Oxygen Reduction Reaction
- Open Access
Construction of Flower-like FeCo2O4 Nanosheets on Ni Foam as Efficient Electrocatalyst for Oxygen Evolution Reaction
Developing efficient transition metal oxide electrodes is essential to energy conversion and storage. In this work, flower-Like FeCo2O4 nanosheets supported on Ni foam were synthesized by facile hydrothermal and calcination treatment. Various temperatures influence the morphologies and oxygen evolution reaction activities. Especially, FeCo2O4/NF-120 °C catalysts showed the best oxygen evolution reaction (OER) activity due to the fact that 3D Ni foam provided good conductive substrate-forming FeCo2O4 nanosheets, which enhanced the electrochemical stability and facilitated the transport of electrolyte and release of oxygen. In addition, the synergistic effect between Fe and Co also enhanced active sites and promoted the OER catalytic performance. The flower-like FeCo2O4/Ni electrodes showed a low overpotential of 124 and 339 mV at the current density of 10 and 50 mA cm−2 for OER, respectively. Also, they displayed a low tafel slope of 43.78 mV dec−1 and good stability in alkaline electrolyte. This research could promote the design of low-cost electrocatalysts for OER.
Open AccessConstruction of Flower-like FeCo2O4 Nanosheets on Ni Foam as Efficient Electrocatalyst for Oxygen Evolution Reaction
Developing efficient transition metal oxide electrodes is essential to energy conversion and storage. In this work, flower-Like FeCo2O4 nanosheets supported on Ni foam were synthesized by facile hydrothermal and calcination treatment. Various temperatures influence the morphologies and oxygen evolution reaction activities. Especially, FeCo2O4/NF-120 °C catalysts showed the best oxygen evolution reaction (OER) activity due to the fact that 3D Ni foam provided good conductive substrate-forming FeCo2O4 nanosheets, which enhanced the electrochemical stability and facilitated the transport of electrolyte and release of oxygen. In addition, the synergistic effect between Fe and Co also enhanced active sites and promoted the OER catalytic performance. The flower-like FeCo2O4/Ni electrodes showed a low overpotential of 124 and 339 mV at the current density of 10 and 50 mA cm−2 for OER, respectively. Also, they displayed a low tafel slope of 43.78 mV dec−1 and good stability in alkaline electrolyte. This research could promote the design of low-cost electrocatalysts for OER.
- Open Access
Hydrothermal Synthesis of NiCo2O4 @NiCo2O4 Core-Shell Nanostructures Anchored on Ni Foam for Efficient Oxygen Evolution Reactions Catalysts
NiCo2O4@NiCo2O4 core-shell nanostructures anchored on Ni foam (NF) are synthesized by the hydrothermal and subsequent calcination process. In these structures, NiCo2O4 nanosheets are coated on NiCo2O4 nanocones, which are decorated on the surface of conductive NF. As an oxygen evolution reaction catalyst, the NiCo2O4@NiCo2O4 exhibits low overpotential of 440 mV at the current density of 100 mA cm−2. Furthermore, the composite shows outstanding long-term stability during 12 h continuous operation. Electrochemical impedance spectroscopy (EIS) reveals that the charge transfer resistance of NiCo2O4@NiCo2O4 is much smaller than other composites. The results reveal that the composite exhibits superior activity for OER in contrast to individual NiCo2O4 nanosheets or NiCo2O4 nanocones, which are attributed to the NiCo2O4@NiCo2O4 composite and integrate multiple advantages of nanostructures, abundant catalytic sites and outstanding stability.
Open AccessHydrothermal Synthesis of NiCo2O4 @NiCo2O4 Core-Shell Nanostructures Anchored on Ni Foam for Efficient Oxygen Evolution Reactions Catalysts
NiCo2O4@NiCo2O4 core-shell nanostructures anchored on Ni foam (NF) are synthesized by the hydrothermal and subsequent calcination process. In these structures, NiCo2O4 nanosheets are coated on NiCo2O4 nanocones, which are decorated on the surface of conductive NF. As an oxygen evolution reaction catalyst, the NiCo2O4@NiCo2O4 exhibits low overpotential of 440 mV at the current density of 100 mA cm−2. Furthermore, the composite shows outstanding long-term stability during 12 h continuous operation. Electrochemical impedance spectroscopy (EIS) reveals that the charge transfer resistance of NiCo2O4@NiCo2O4 is much smaller than other composites. The results reveal that the composite exhibits superior activity for OER in contrast to individual NiCo2O4 nanosheets or NiCo2O4 nanocones, which are attributed to the NiCo2O4@NiCo2O4 composite and integrate multiple advantages of nanostructures, abundant catalytic sites and outstanding stability.
- 31 October 2019
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 14 (10)
Novel Flower-Like CuO/N-rGO as Enhanced Electrocatalyst for Oxygen Reduction Reaction
Flower-like copper oxide (CuO)/nitrogen-doped reduced graphene oxide (N-rGO) was synthesized through a one-pot microwave hydrothermal method by using polyvinylpyrrolidone (PVP) as surfactant. In the process, in situ formation of nanomaterial CuO, reduction of graphene oxide and doping of nitrogen species occurred simultaneously in urea solution. The structural and surface properties of the material were investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopies (TEM), the energy dispersive spectroscopic (EDS) and powder X-ray diffraction (XRD). This showed the flower-like CuO with an interconnected architecture was successfully uniformed and grown on the surface of N-rGO. Moreover, the surfactant PVP and urea were found to be the key factors to control the morphology of the CuO nanostructure. Electrochemical investigations indicated that the CuO/N-rGO composite exhibited a significantly enhanced ORR activity in comparison to pure CuO and N-rGO in an alkaline solution. The enhancement in ORR activity of CuO/N-rGO composite can be attributed to the synergistic effects of good electron transport from N-rGO as well as abundance of exposed catalytic sites and meso/macroporosity from CuO nanostructures.
- 31 October 2019
- Published by World Scientific Pub Co Pte Ltd in Nano
- Vol. 14 (10)
Novel Flower-Like CuO/N-rGO as Enhanced Electrocatalyst for Oxygen Reduction Reaction
Flower-like copper oxide (CuO)/nitrogen-doped reduced graphene oxide (N-rGO) was synthesized through a one-pot microwave hydrothermal method by using polyvinylpyrrolidone (PVP) as surfactant. In the process, in situ formation of nanomaterial CuO, reduction of graphene oxide and doping of nitrogen species occurred simultaneously in urea solution. The structural and surface properties of the material were investigated by field emission scanning electron microscopy (FESEM) and transmission electron microscopies (TEM), the energy dispersive spectroscopic (EDS) and powder X-ray diffraction (XRD). This showed the flower-like CuO with an interconnected architecture was successfully uniformed and grown on the surface of N-rGO. Moreover, the surfactant PVP and urea were found to be the key factors to control the morphology of the CuO nanostructure. Electrochemical investigations indicated that the CuO/N-rGO composite exhibited a significantly enhanced ORR activity in comparison to pure CuO and N-rGO in an alkaline solution. The enhancement in ORR activity of CuO/N-rGO composite can be attributed to the synergistic effects of good electron transport from N-rGO as well as abundance of exposed catalytic sites and meso/macroporosity from CuO nanostructures.