Oleksandr Pushkarov
Research Subjects
Research Interests
Oleksandr Pushkarov has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Iryna Sevruk
SE “Institute of Environmental Geochemistry of the NAS of Ukraine”, Kyiv, Ukraine
12 shared publications - Vitaliy Dolin
SE "Institute of environmental Geochemistry of the NAS of Ukraine
10 shared publications - Oleksandr Zubko
SE “Institute of Environmental Geochemistry of the NAS of Ukraine”, Kyiv, Ukraine
5 shared publications - I.F. Shramenko
SE “Institute of Environmental Geochemistry of the NAS of Ukraine”, Kyiv, Ukraine
3 shared publications - A.V. Zubko2 shared publications
SI «Institute of Environmental Geochemistry of NAS of Ukraine»
2 shared publications
Latest Publications
- Open Access
- 1 June 2025
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 62,p. 112-126
Migration of tritium in the components of the natural environment
Formulation of the problem. Tritium formed as a result of natural or man-made processes is included in migration flows depending on the forms of its presence – gaseous (NT), aqueous (NTO) and organically bound (OZT). According to these forms, tritium is redistributed among various components of the natural environment and distributed in the environment according to the laws of the hydrogen cycle in nature. Materials and methods. During atmospheric transport, the tritium concentration decreases according to the laws of diffusion in air plumes. Part of tritium with atmospheric precipitation falls on the surface of water bodies, where it is diluted to background concentrations, on vegetation and soil. The further geochemical history of these precipitations is determined by the laws of biogeochemical and hydrogeochemical migration and inclusion in the short-term and long-term cycles in the biosphere. Results. According to the results of monitoring the content of tritium in the snow cover and in atmospheric moisture in the zone of influence of radioactive waste preservation (SFRW) projects, it was determined that the formation of atmogeochemical anomalies of tritium depends on the constructive features of the confinement, geomorphological and landscape-geochemical factors (relief forms, type and structure of the forest ecosystem) , the presence of technological premises, which play the role of natural and man-made barriers in the way of the movement of air masses, as well as from the wind rose generalized for the control period. Biogeochemical migration of tritium occurs with water from atmospheric precipitation in the soil-plant system. Tritium, like a hydrogen isotope, participates in all processes of biogeomigration, which is primarily determined by the biological role of water and organic matter. The main biophysical processes determining the biogeomigration of tritium include: initial deposition on the surface of the soil and vegetation, conversion of tritiated hydrogen (HT) into tritiated water (HTO) in the soil due to bacterial oxidation, absorption of HTO by plants with the conversion of a part of HTO into an organically bound form (OZT), transportation of HTO in soil and absorption of HTO by roots, re-emission of HTO into the atmosphere from soil and plants. Hydrogeochemical migration of tritium in surface reservoirs and watercourses causes its dilution to background concentrations. Yes, in discharges from the nuclear power plants of Ukraine in Dnipro (Kakhovsky Reservoir), Horyn, Styr, P. Bug on the weekend, downstream of the tritium concentrations exceed 20÷50 Bq×dm–3. Conclusions. According to the results of radio-hydrogeological monitoring of the territories adjacent to the SFRW, the main factors influencing the formation of tritium hydrogeofiltration flows in the geological environment were determined. These include: the intensity of the release of tritiated water from RAW storage facilities, hydraulic permeability, hydrophysical parameters and the mineral composition of the zone of unsaturated filtration, the topography of the surface of the water-resistant horizon and seasonal fluctuations in the amount of atmospheric precipitation to the local aquifer. The long-term operation of tritium hydrogeofiltration flows in the system "aeration zone (ZA) – underground aquifer (SAW)" causes their spread to a distance that significantly exceeds the planned dimensions of the containers and the territory of the SFRW.
- 1 June 2025
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 62,p. 112-126
Open AccessMigration of tritium in the components of the natural environment
Formulation of the problem. Tritium formed as a result of natural or man-made processes is included in migration flows depending on the forms of its presence – gaseous (NT), aqueous (NTO) and organically bound (OZT). According to these forms, tritium is redistributed among various components of the natural environment and distributed in the environment according to the laws of the hydrogen cycle in nature. Materials and methods. During atmospheric transport, the tritium concentration decreases according to the laws of diffusion in air plumes. Part of tritium with atmospheric precipitation falls on the surface of water bodies, where it is diluted to background concentrations, on vegetation and soil. The further geochemical history of these precipitations is determined by the laws of biogeochemical and hydrogeochemical migration and inclusion in the short-term and long-term cycles in the biosphere. Results. According to the results of monitoring the content of tritium in the snow cover and in atmospheric moisture in the zone of influence of radioactive waste preservation (SFRW) projects, it was determined that the formation of atmogeochemical anomalies of tritium depends on the constructive features of the confinement, geomorphological and landscape-geochemical factors (relief forms, type and structure of the forest ecosystem) , the presence of technological premises, which play the role of natural and man-made barriers in the way of the movement of air masses, as well as from the wind rose generalized for the control period. Biogeochemical migration of tritium occurs with water from atmospheric precipitation in the soil-plant system. Tritium, like a hydrogen isotope, participates in all processes of biogeomigration, which is primarily determined by the biological role of water and organic matter. The main biophysical processes determining the biogeomigration of tritium include: initial deposition on the surface of the soil and vegetation, conversion of tritiated hydrogen (HT) into tritiated water (HTO) in the soil due to bacterial oxidation, absorption of HTO by plants with the conversion of a part of HTO into an organically bound form (OZT), transportation of HTO in soil and absorption of HTO by roots, re-emission of HTO into the atmosphere from soil and plants. Hydrogeochemical migration of tritium in surface reservoirs and watercourses causes its dilution to background concentrations. Yes, in discharges from the nuclear power plants of Ukraine in Dnipro (Kakhovsky Reservoir), Horyn, Styr, P. Bug on the weekend, downstream of the tritium concentrations exceed 20÷50 Bq×dm–3. Conclusions. According to the results of radio-hydrogeological monitoring of the territories adjacent to the SFRW, the main factors influencing the formation of tritium hydrogeofiltration flows in the geological environment were determined. These include: the intensity of the release of tritiated water from RAW storage facilities, hydraulic permeability, hydrophysical parameters and the mineral composition of the zone of unsaturated filtration, the topography of the surface of the water-resistant horizon and seasonal fluctuations in the amount of atmospheric precipitation to the local aquifer. The long-term operation of tritium hydrogeofiltration flows in the system "aeration zone (ZA) – underground aquifer (SAW)" causes their spread to a distance that significantly exceeds the planned dimensions of the containers and the territory of the SFRW.
- 1 January 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 18-24
ADSORPTION OF TRITIUM FROM AQUEOUS SOLUTIONS BY PALYGORSKITE
The results of experiments using palygorskite from the Cherkasy deposit (Ukraine) and tritiated water (“HTO”) are highlighted. The performed studies provide an assessment of the adsorption of tritium from an aqueous solution and the effect of hydrogen isotope fractionation in a stationary closed system “HTO – palygorskite”. The mechanisms of retention of the superheavy hydrogen isotope in the structure of a natural clay mineral are explained. It is established that the accumulation of tritium is a multi-stage process. It was determined that the adsorption capacity of palygorskite is due to uncompensated charges on the surface of mineral particles, the presence of zeolite and coordination-bound water in the channels, where molecular HTO → H2O exchange between the mineral and tritiated water occurs, as well as ionic OT– → OH– substitution in the octahedral layers of the mineral. The distribution of tritium in four structural positions was determined – in surface-adsorbed, coordination-bound, zeolite and strongly bound forms. The predominance of the strongly bound form (22% of the total tritium content in the mineral) over channel water was revealed. The rationality of using palygorskite for the accumulation of tritium from aqueous solutions was determined.
- 1 January 2025
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)
- p. 18-24
ADSORPTION OF TRITIUM FROM AQUEOUS SOLUTIONS BY PALYGORSKITE
The results of experiments using palygorskite from the Cherkasy deposit (Ukraine) and tritiated water (“HTO”) are highlighted. The performed studies provide an assessment of the adsorption of tritium from an aqueous solution and the effect of hydrogen isotope fractionation in a stationary closed system “HTO – palygorskite”. The mechanisms of retention of the superheavy hydrogen isotope in the structure of a natural clay mineral are explained. It is established that the accumulation of tritium is a multi-stage process. It was determined that the adsorption capacity of palygorskite is due to uncompensated charges on the surface of mineral particles, the presence of zeolite and coordination-bound water in the channels, where molecular HTO → H2O exchange between the mineral and tritiated water occurs, as well as ionic OT– → OH– substitution in the octahedral layers of the mineral. The distribution of tritium in four structural positions was determined – in surface-adsorbed, coordination-bound, zeolite and strongly bound forms. The predominance of the strongly bound form (22% of the total tritium content in the mineral) over channel water was revealed. The rationality of using palygorskite for the accumulation of tritium from aqueous solutions was determined.
- Open Access
- 1 December 2024
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 61,p. 85-96
Influence of mineral adsorbent on efficiency of fractionation of heavy hydrogen isotopes in aqueous solutions
Formulation of the problem. Solving the problem of separation of heavy hydrogen isotopes in aqueous solutions is important for the purification of process waters from the tritium formed in them at the enterprises of the fuel and energy complex. The authors' research established the possibility of cleaning tritiated water from tritium using mineral adsorbents. The purpose of the research was to determine the influence of the mineral adsorbent structure on the efficiency of fractionation of heavy hydrogen isotopes in aqueous solutions. Materials and methods. To determine the dependence of the fractionation of heavy hydrogen isotopes in the tritium-deuterium-protium aqueous solution H(DT)O on the structure of the mineral adsorbent, eight experimental water-mineral systems were created. The clay rocks used as adsorbents are mainly composed of: kaolinite from the Glukhovetsky deposit (structural type 1 : 1), layered silicates of the structural type 2 : 1 – octahedral montmorillonite and tetrahedral saponite , palyhorskite from the Cherkaske deposit and sepiolite from the Vikalvaro deposit , as well as clinoptilolite. Experiments were performed in stationary conditions. Determination of temperature intervals for extracting moisture fractions from the mineral mass corresponding to certain structural positions in montmorillonite, saponite, palyhorskite and sepiolite was performed using thermogravimetric and differential thermogravimetric analyses. According to the obtained results, the temperature intervals were determined in which, with the help of special equipment, moisture fractions corresponding to certain structural positions in mineral adsorbents were isolated. Results. It was established for the first time that the fractionation of heavy hydrogen isotopes in water-mineral systems depends on the structural type of the mineral adsorbent. The largest shift in the deuterium/tritium isotopic ratio in the residual solution (decantate) was recorded in systems where the mineral adsorbent is represented by layered silicates – montmorillonite, saponite, and sepiolite. Also, it was established for the first time that hydrogen isotopes were distributed in mineral adsorbents depending on their structural structure. The largest shift in the isotopic deuterium/tritium ratio during surface adsorption occurred in systems with clinoptilolite, palyhorskite, and montmorillonite, which was probably due to the presence of uncompensated surface charges in the mineral substance and the developed specific surface area. The exchange of hydroxyl groups between the H(DT)O solution and the silicate structures of the substrate was accompanied by the largest shift in the deuterium/tritium isotopic ratio in palyhorskite, sepiolite, and kaolinite. Conclusions. The presence of different types of structural structure in layered and framework silicates, as well as different types of connections in their structures, is of significant importance for the consequences of the interaction of mineral adsorbents with heavy water solutions, which can be accompanied by the separation of heavy hydrogen isotopes and be used for the purification of process waters of nuclear power plants from tritium.
- 1 December 2024
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 61,p. 85-96
Open AccessInfluence of mineral adsorbent on efficiency of fractionation of heavy hydrogen isotopes in aqueous solutions
Formulation of the problem. Solving the problem of separation of heavy hydrogen isotopes in aqueous solutions is important for the purification of process waters from the tritium formed in them at the enterprises of the fuel and energy complex. The authors' research established the possibility of cleaning tritiated water from tritium using mineral adsorbents. The purpose of the research was to determine the influence of the mineral adsorbent structure on the efficiency of fractionation of heavy hydrogen isotopes in aqueous solutions. Materials and methods. To determine the dependence of the fractionation of heavy hydrogen isotopes in the tritium-deuterium-protium aqueous solution H(DT)O on the structure of the mineral adsorbent, eight experimental water-mineral systems were created. The clay rocks used as adsorbents are mainly composed of: kaolinite from the Glukhovetsky deposit (structural type 1 : 1), layered silicates of the structural type 2 : 1 – octahedral montmorillonite and tetrahedral saponite , palyhorskite from the Cherkaske deposit and sepiolite from the Vikalvaro deposit , as well as clinoptilolite. Experiments were performed in stationary conditions. Determination of temperature intervals for extracting moisture fractions from the mineral mass corresponding to certain structural positions in montmorillonite, saponite, palyhorskite and sepiolite was performed using thermogravimetric and differential thermogravimetric analyses. According to the obtained results, the temperature intervals were determined in which, with the help of special equipment, moisture fractions corresponding to certain structural positions in mineral adsorbents were isolated. Results. It was established for the first time that the fractionation of heavy hydrogen isotopes in water-mineral systems depends on the structural type of the mineral adsorbent. The largest shift in the deuterium/tritium isotopic ratio in the residual solution (decantate) was recorded in systems where the mineral adsorbent is represented by layered silicates – montmorillonite, saponite, and sepiolite. Also, it was established for the first time that hydrogen isotopes were distributed in mineral adsorbents depending on their structural structure. The largest shift in the isotopic deuterium/tritium ratio during surface adsorption occurred in systems with clinoptilolite, palyhorskite, and montmorillonite, which was probably due to the presence of uncompensated surface charges in the mineral substance and the developed specific surface area. The exchange of hydroxyl groups between the H(DT)O solution and the silicate structures of the substrate was accompanied by the largest shift in the deuterium/tritium isotopic ratio in palyhorskite, sepiolite, and kaolinite. Conclusions. The presence of different types of structural structure in layered and framework silicates, as well as different types of connections in their structures, is of significant importance for the consequences of the interaction of mineral adsorbents with heavy water solutions, which can be accompanied by the separation of heavy hydrogen isotopes and be used for the purification of process waters of nuclear power plants from tritium.
- Open Access
- 1 January 2024
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- Vol. 1 (1 (104)) , 49-54
INTERACTION OF H(D,T)O WITH MINERAL ADSORBENTS IN STATIONARY SYSTEMS
Background. The theoretical basis of the experiments is the idea that the significant adsorption properties of layered silicates of the montmorillonite and palygorskite groups and clinoptilolite with a developed specific surface due to the dynamic nature of adsorption-desorption processes due to kinetic isotope effects can ensure priority retention of mineral particles of more inert hydroxide groups ОТ– near the adsorption surfaces. Methods. Cherkasy bentonite with a montmorillonite content of 75 % (hereafter montmorillonite), Varvarivska saponite, and Sokyrnytsky clinoptilolite were used for the experiments. Experiments were performed in stationary mode in hermetically sealed containers (two-phase watermineral system). Results. During the first 7 days of interaction of the aqueous and mineral phases, the specific activity of tritium in the working solution decreased by 31.8–69.5 %. Subsequently, during the 92 days of interaction of the aqueous solution of H(D,T)O with mineral adsorbents, the change in the specific activity of tritium did not exceed 2–4 %. At the same time, the initial concentration of deuterium in the working solution of Н(D,Т)О of two-phase water-mineral systems decreased by only 0.8–14 %, ranging from 0.0066 % to 0.0408 %. During the experiment, in closed water-mineral systems, a partial interphase redistribution of the initial stock of hydrogen isotopes, which was accumulated in the initial working solution Н(D,Т)О, took place. In the process of adsorption of the solution by mineral adsorbents, the initial moisture in the mineral phase was replaced by Н(D,Т)О and the content of hydrogen isotopes increased in them. The content of tritium in the adsorbate, depending on the mineral type of the adsorbent, increased by 31.8 to 69.5 %. Concentration of deuterium increased by 10.1–48.6 %, which was due to the different adsorption capacity of mineral adsorbents. Adsorption of the H(D,T)O working solution by mineral adsorbents was accompanied by fractionation of heavy hydrogen isotopes. Сonclusions. Аs a result of the interaction of the Н(D,Т)О solution with mineral adsorbents, kinetic isotope effects determined the priority retention of more inert hydroxide ОТ-groups than OD- groups near the adsorption surface of mineral particles. Consequently, interphase fractionation of heavy hydrogen isotopes occurred in stationary water-mineral systems. The coefficients of tritium interphase fractionation range from α = 1.26 for palyhorskite to α = 2.96 for clinoptilolite. For deuterium, this indicator is equal to α = 0.89 for clinoptilolite and to α = 1.10 for saponite.
- 1 January 2024
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- Vol. 1 (1 (104)) , 49-54
Open AccessINTERACTION OF H(D,T)O WITH MINERAL ADSORBENTS IN STATIONARY SYSTEMS
Background. The theoretical basis of the experiments is the idea that the significant adsorption properties of layered silicates of the montmorillonite and palygorskite groups and clinoptilolite with a developed specific surface due to the dynamic nature of adsorption-desorption processes due to kinetic isotope effects can ensure priority retention of mineral particles of more inert hydroxide groups ОТ– near the adsorption surfaces. Methods. Cherkasy bentonite with a montmorillonite content of 75 % (hereafter montmorillonite), Varvarivska saponite, and Sokyrnytsky clinoptilolite were used for the experiments. Experiments were performed in stationary mode in hermetically sealed containers (two-phase watermineral system). Results. During the first 7 days of interaction of the aqueous and mineral phases, the specific activity of tritium in the working solution decreased by 31.8–69.5 %. Subsequently, during the 92 days of interaction of the aqueous solution of H(D,T)O with mineral adsorbents, the change in the specific activity of tritium did not exceed 2–4 %. At the same time, the initial concentration of deuterium in the working solution of Н(D,Т)О of two-phase water-mineral systems decreased by only 0.8–14 %, ranging from 0.0066 % to 0.0408 %. During the experiment, in closed water-mineral systems, a partial interphase redistribution of the initial stock of hydrogen isotopes, which was accumulated in the initial working solution Н(D,Т)О, took place. In the process of adsorption of the solution by mineral adsorbents, the initial moisture in the mineral phase was replaced by Н(D,Т)О and the content of hydrogen isotopes increased in them. The content of tritium in the adsorbate, depending on the mineral type of the adsorbent, increased by 31.8 to 69.5 %. Concentration of deuterium increased by 10.1–48.6 %, which was due to the different adsorption capacity of mineral adsorbents. Adsorption of the H(D,T)O working solution by mineral adsorbents was accompanied by fractionation of heavy hydrogen isotopes. Сonclusions. Аs a result of the interaction of the Н(D,Т)О solution with mineral adsorbents, kinetic isotope effects determined the priority retention of more inert hydroxide ОТ-groups than OD- groups near the adsorption surface of mineral particles. Consequently, interphase fractionation of heavy hydrogen isotopes occurred in stationary water-mineral systems. The coefficients of tritium interphase fractionation range from α = 1.26 for palyhorskite to α = 2.96 for clinoptilolite. For deuterium, this indicator is equal to α = 0.89 for clinoptilolite and to α = 1.10 for saponite.
- Open Access
- 17 February 2023
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 24,p. 830-832
EFFECT OF WOLLASTONITE STRUCTURE ON DETRITIZATION OF AQUEOUS SOLUTIONS
The tritium produced in a nuclear reactor is partially released into the atmosphere and mainly discharged into the hydrosphere. The approval at the level of the European Commission of the Euratom NFRP-14 special research program "Cross-cutting support to improved knowledge on tritium management in fission and fusion facilities" indicates the urgent need for research to prevent the spread of tritium in natural and man-made biogeosystems. Previous studies by us [2,5,6] revealed the possibility of using layered silicates and zeolite to extract tritium from aqueous solutions. The aim of the work is to determine the influence of the structural features of the mineral adsorbent on the extraction of tritium from protium-tritium water (PTW). Wollastonite Ca(SiO3) from the class of chain silicates was used as such adsorbent. The tangled-fibrous microtexture of the mineral (Fig. 1) due to the large specific surface area of the needle micrograins and, accordingly, the significant surface adsorption potential can ensure the absorption of HTO from the tritiated water solution.
- 17 February 2023
- Published by European Scientific Platform (Publications) in Grail of Science
- No. 24,p. 830-832
Open AccessEFFECT OF WOLLASTONITE STRUCTURE ON DETRITIZATION OF AQUEOUS SOLUTIONS
The tritium produced in a nuclear reactor is partially released into the atmosphere and mainly discharged into the hydrosphere. The approval at the level of the European Commission of the Euratom NFRP-14 special research program "Cross-cutting support to improved knowledge on tritium management in fission and fusion facilities" indicates the urgent need for research to prevent the spread of tritium in natural and man-made biogeosystems. Previous studies by us [2,5,6] revealed the possibility of using layered silicates and zeolite to extract tritium from aqueous solutions. The aim of the work is to determine the influence of the structural features of the mineral adsorbent on the extraction of tritium from protium-tritium water (PTW). Wollastonite Ca(SiO3) from the class of chain silicates was used as such adsorbent. The tangled-fibrous microtexture of the mineral (Fig. 1) due to the large specific surface area of the needle micrograins and, accordingly, the significant surface adsorption potential can ensure the absorption of HTO from the tritiated water solution.
- Open Access
- 1 January 2022
- Published by Publishing House Helvetica (Publications)
- No. 35,p. 65-68
USE OF MINERAL PROTON-CONDUCTIVE MEMBRANES FOR ELECTROOSMOTIC FRACTIONATION OF THE HYDROGEN ISOTOPES
- 1 January 2022
- Published by Publishing House Helvetica (Publications)
- No. 35,p. 65-68
Open AccessUSE OF MINERAL PROTON-CONDUCTIVE MEMBRANES FOR ELECTROOSMOTIC FRACTIONATION OF THE HYDROGEN ISOTOPES
- Open Access
- 1 January 2022
- Published by Publishing House Helvetica (Publications) in Geochemistry of Technogenesis
- No. 35,p. 28-32
DETRITIZATION OF AQUEOUS SOLUTIONS USING HIBSITE
Важливим завданням щодо захисту навколишнього середовища від тритієвого забруднення є пошук ефективних, простих, доступних, недороговартісних і низькоенергозатратних методів вилучення тритію з великих об’ємів низько- та середньоактивних водних розчинів. В статті з використанням досліджень на експериментальній стаціонарній системі на прикладі природного мінералу гібситу отримано нові дані щодо впливу октаедричної складової структури шаруватих силікатів на вилучення тритію із водних розчинів та визначена можливість використання гібситу в якості природного адсорбента тритію. Оцінена ступінь адсорбції тритію з водного розчину та ефект фракціонування ізотопів водню у стаціонарній системі «НТО-гібсит». Пояснений механізм затримки тритію в структурі природного адсорбенту. Тритій, вилучений із тритійованої води розподіляється у мінеральній речовині між різними структурними позиціями – з найменшою енергією зв’язку у молекулярній формі НТО в поверхнево-адсорбованій волозі (1 фракція), із дещо більшою – в іонній формі –ОТ у структурних позиціях мінерального адсорбенту (2 і 3 фракції). В гібситі у поверхнево адсорбованій формі затримується до 39% від загальної кількості тритію, вилученого із водного розчину. Переважна затримка біля мінеральної поверхні поляризованих молекул НТО ніж молекул Н2О внаслідок динамічних адсорбційно-десорбційних процесів обумовлює ефект фракціонування ізотопів водню (α = 1,14). Обмін між ОН-групами структурних Al-гідроксильних шарів мінералу і ОТ-групами тритійованої води призводить до закріплення у цій формі до 55% тритію. Отримані нові наукові результати, щодо впливу структурних і фізико-хімічних властивостей мінерального адсорбенту на його здатність вилучати тритій із водних розчинів та нові дані, щодо особливостей механізму міжфазового ізотопно-водневого обміну у водно-мінеральній системі. Це забезпечує, із залученням результатів наших попередніх досліджень, можливість розробки більш ефективних методів детритізації водних розчинів.
- 1 January 2022
- Published by Publishing House Helvetica (Publications) in Geochemistry of Technogenesis
- No. 35,p. 28-32
Open AccessDETRITIZATION OF AQUEOUS SOLUTIONS USING HIBSITE
Важливим завданням щодо захисту навколишнього середовища від тритієвого забруднення є пошук ефективних, простих, доступних, недороговартісних і низькоенергозатратних методів вилучення тритію з великих об’ємів низько- та середньоактивних водних розчинів. В статті з використанням досліджень на експериментальній стаціонарній системі на прикладі природного мінералу гібситу отримано нові дані щодо впливу октаедричної складової структури шаруватих силікатів на вилучення тритію із водних розчинів та визначена можливість використання гібситу в якості природного адсорбента тритію. Оцінена ступінь адсорбції тритію з водного розчину та ефект фракціонування ізотопів водню у стаціонарній системі «НТО-гібсит». Пояснений механізм затримки тритію в структурі природного адсорбенту. Тритій, вилучений із тритійованої води розподіляється у мінеральній речовині між різними структурними позиціями – з найменшою енергією зв’язку у молекулярній формі НТО в поверхнево-адсорбованій волозі (1 фракція), із дещо більшою – в іонній формі –ОТ у структурних позиціях мінерального адсорбенту (2 і 3 фракції). В гібситі у поверхнево адсорбованій формі затримується до 39% від загальної кількості тритію, вилученого із водного розчину. Переважна затримка біля мінеральної поверхні поляризованих молекул НТО ніж молекул Н2О внаслідок динамічних адсорбційно-десорбційних процесів обумовлює ефект фракціонування ізотопів водню (α = 1,14). Обмін між ОН-групами структурних Al-гідроксильних шарів мінералу і ОТ-групами тритійованої води призводить до закріплення у цій формі до 55% тритію. Отримані нові наукові результати, щодо впливу структурних і фізико-хімічних властивостей мінерального адсорбенту на його здатність вилучати тритій із водних розчинів та нові дані, щодо особливостей механізму міжфазового ізотопно-водневого обміну у водно-мінеральній системі. Це забезпечує, із залученням результатів наших попередніх досліджень, можливість розробки більш ефективних методів детритізації водних розчинів.
- Open Access
- 25 December 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Geochemistry of Technogenesis
- Vol. 6 (34) , 45-57
STUDY OF TRITIUM MIGRATION AND RETENTION MECHANISMS IN THE GEOLOGICAL ENVIRONMENT (BY THE EXAMPLE OF THE KYIV RADIOACTIVE WASTE STORAGE FACILITY)
Radioactive waste storage facilities (RWSF) are a potential source of tritium in the biosphere. Engineered concrete constructions are not sufficiently reliable forasmuch as water leaks contaminated with tritium from the storage facilities into the geological environment has been detected. The barrier properties of the natural environment at the storage sites are determined by the ability to absorb and retain heavy isotopes of hydrogen during a considerable period of time and thus exclude its circulation in the biosphere. Various elements of the natural ecosystem take part in the absorption of tritium – the geological environment, soil organic matter, annual and perennial vegetation, micro- and macrobiota. A certain part of tritium in the gaseous and aerosol form is released into the air. The highest concentrations of tritium are recorded in the area close to the concrete radioactive waste (RW) storage facilities, where the vapor-gas emanation plume is least dispersed. With distance from the storage facilities, the tritium concentration in the soil humus layer significantly decreases due to the spatial dispersion of the tritium in the atmospheric plume. Tritium from the air enters the soil with the atmospheric precipitation and is partially retained in the humified layer of the soil. Most of the tritium from the atmospheric precipitation is transported by the vertical infiltration flow through the sedimentary layers represented by loess sandy loams and loams, where it is finally retained. In the area close to RWSFs, the concentration of heavy hydrogen isotope in pore, interstitial and film water (1 fraction) is up to 87 % of its total content in an elementary block. In the more tightly bound forms (2 and 3 fractions), it is 9 % and 4 %, respectively. Farther from the RW storage facilities in the predominant air flow direction, the tritium concentration in free water decreases to 75 %. In this area, more intensive redistribution of tritium between the structural sites is observed. At the more distant monitoring points (wells), from 25 % to 37 % of the total tritium amount in the soils is retained in more tightly bound forms in the structure of rock-forming, mainly clay minerals
- 25 December 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Geochemistry of Technogenesis
- Vol. 6 (34) , 45-57
Open AccessSTUDY OF TRITIUM MIGRATION AND RETENTION MECHANISMS IN THE GEOLOGICAL ENVIRONMENT (BY THE EXAMPLE OF THE KYIV RADIOACTIVE WASTE STORAGE FACILITY)
Radioactive waste storage facilities (RWSF) are a potential source of tritium in the biosphere. Engineered concrete constructions are not sufficiently reliable forasmuch as water leaks contaminated with tritium from the storage facilities into the geological environment has been detected. The barrier properties of the natural environment at the storage sites are determined by the ability to absorb and retain heavy isotopes of hydrogen during a considerable period of time and thus exclude its circulation in the biosphere. Various elements of the natural ecosystem take part in the absorption of tritium – the geological environment, soil organic matter, annual and perennial vegetation, micro- and macrobiota. A certain part of tritium in the gaseous and aerosol form is released into the air. The highest concentrations of tritium are recorded in the area close to the concrete radioactive waste (RW) storage facilities, where the vapor-gas emanation plume is least dispersed. With distance from the storage facilities, the tritium concentration in the soil humus layer significantly decreases due to the spatial dispersion of the tritium in the atmospheric plume. Tritium from the air enters the soil with the atmospheric precipitation and is partially retained in the humified layer of the soil. Most of the tritium from the atmospheric precipitation is transported by the vertical infiltration flow through the sedimentary layers represented by loess sandy loams and loams, where it is finally retained. In the area close to RWSFs, the concentration of heavy hydrogen isotope in pore, interstitial and film water (1 fraction) is up to 87 % of its total content in an elementary block. In the more tightly bound forms (2 and 3 fractions), it is 9 % and 4 %, respectively. Farther from the RW storage facilities in the predominant air flow direction, the tritium concentration in free water decreases to 75 %. In this area, more intensive redistribution of tritium between the structural sites is observed. At the more distant monitoring points (wells), from 25 % to 37 % of the total tritium amount in the soils is retained in more tightly bound forms in the structure of rock-forming, mainly clay minerals
- Open Access
- 1 December 2021
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 55,p. 94-106
Influence of the structure of a mineral adsorbent on the detritization of aqueous solutions
Introduction. Formed in a nuclear reactor, tritium is mainly discharged into the hydrosphere. A significant part of tritium also enters the environment during the reprocessing of spent nuclear fuel. Currently, the problem is the development of effective, simple, affordable, inexpensive and low-energy methods for extracting tritium from large volumes of low- and intermediate-level aqueous solutions. Review of previous publications. At nuclear power plants, it is widely used for the purification of small volumes of highly active process waters by isotopic exchange in the "hydrogen-water" system [patents RU 2380144, RU 2060801, RU 2525423, RU 2148426]. There are methods for isotopic fractionation of НTO by low-temperature rectification, which either requires significant energy consumption or occurs with a very insignificant isotopic effect at the level of 1.1 [patents UA 57558, RU 2010772, RU 2091336]. In world practice, mineral adsorbents are widely used, but there are no developments designed to purify aqueous solutions from tritium. Our previous studies have clarified the possibility of using layered silicates and zeolite for the extraction of tritium from aqueous solutions (patents UA 103033, UA 103050, UA 113348). The ability of other minerals to adsorb tritium from aqueous solutions remains unresolved. In order to solve this problem, we involved in experimental research minerals from the classes of hydroxides, sulfates and chain silicates. Purpose. The aim of the work is to determine the influence of the structural features of mineral adsorbents on the removal of tritium from proto-tritium water ("НTO") and the possibility of using a more expanded spectrum of minerals as such adsorbents. Results. Up to 39% of tritium extracted from tritiated water is retained in hibsite in surface adsorbed form. In the boundary layer, heavier НTO molecules are retained with a greater advantage than H2O molecules (α = 1.14). Gypsum: due to the substitution of OH groups of the gypsum crystal lattice by OT groups in the mineral structure, up to 36% of the absorbed tritium solution with partial isotope-hydrogen fractionation is fixed. Due to the presence of tangled fibrous microtexture in wollastonite, a significant part of tritium absorbed during the experiment from a solution of tritiated water is fixed in a surface adsorbed form (61.3%, fractionation coefficient α = 1.03). The reaction of hydroxylation of CaO when it interacts with tritiated water is accompanied by a predominant binding to calcium of OT groups formed by the dissociation of НTO molecules because heavy hydrogen isotopes form a stronger covalent bond with oxygen than with protium (α = 1.23). Conclusions. The highest total ability to extract tritium from aqueous solution was observed in hibsite (38.7%), and the lowest - in wollastonite (34.5%). The obtained new scientific results with the involvement of the results of our previous studies provide an opportunity for more effective development of methods for detritalization of aqueous so-lutions.
- 1 December 2021
- Published by V. N. Karazin Kharkiv National University in Visnyk of V. N. Karazin Kharkiv National University. Series Geology. Geography. Ecology
- No. 55,p. 94-106
Open AccessInfluence of the structure of a mineral adsorbent on the detritization of aqueous solutions
Introduction. Formed in a nuclear reactor, tritium is mainly discharged into the hydrosphere. A significant part of tritium also enters the environment during the reprocessing of spent nuclear fuel. Currently, the problem is the development of effective, simple, affordable, inexpensive and low-energy methods for extracting tritium from large volumes of low- and intermediate-level aqueous solutions. Review of previous publications. At nuclear power plants, it is widely used for the purification of small volumes of highly active process waters by isotopic exchange in the "hydrogen-water" system [patents RU 2380144, RU 2060801, RU 2525423, RU 2148426]. There are methods for isotopic fractionation of НTO by low-temperature rectification, which either requires significant energy consumption or occurs with a very insignificant isotopic effect at the level of 1.1 [patents UA 57558, RU 2010772, RU 2091336]. In world practice, mineral adsorbents are widely used, but there are no developments designed to purify aqueous solutions from tritium. Our previous studies have clarified the possibility of using layered silicates and zeolite for the extraction of tritium from aqueous solutions (patents UA 103033, UA 103050, UA 113348). The ability of other minerals to adsorb tritium from aqueous solutions remains unresolved. In order to solve this problem, we involved in experimental research minerals from the classes of hydroxides, sulfates and chain silicates. Purpose. The aim of the work is to determine the influence of the structural features of mineral adsorbents on the removal of tritium from proto-tritium water ("НTO") and the possibility of using a more expanded spectrum of minerals as such adsorbents. Results. Up to 39% of tritium extracted from tritiated water is retained in hibsite in surface adsorbed form. In the boundary layer, heavier НTO molecules are retained with a greater advantage than H2O molecules (α = 1.14). Gypsum: due to the substitution of OH groups of the gypsum crystal lattice by OT groups in the mineral structure, up to 36% of the absorbed tritium solution with partial isotope-hydrogen fractionation is fixed. Due to the presence of tangled fibrous microtexture in wollastonite, a significant part of tritium absorbed during the experiment from a solution of tritiated water is fixed in a surface adsorbed form (61.3%, fractionation coefficient α = 1.03). The reaction of hydroxylation of CaO when it interacts with tritiated water is accompanied by a predominant binding to calcium of OT groups formed by the dissociation of НTO molecules because heavy hydrogen isotopes form a stronger covalent bond with oxygen than with protium (α = 1.23). Conclusions. The highest total ability to extract tritium from aqueous solution was observed in hibsite (38.7%), and the lowest - in wollastonite (34.5%). The obtained new scientific results with the involvement of the results of our previous studies provide an opportunity for more effective development of methods for detritalization of aqueous so-lutions.
- 1 January 2021
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- No. 1 (92),p. 11-16
ELECTRO-OSMOTIC FRACTIONATION OF HYDROGEN ISOTOPES IN ELECTROLYTIC SOLUTIONS USING COMPOSITE PROTON-PERMEABLE MEMBRANES
Based on the analysis of the features of electroosmotic processes that are implemented in proton-conducting membranes, the possibility of fractioning hydrogen isotopes in electrolytes formed using tritiated water (HTO) is estimated. The interaction of the solution with the membranes in their channels leads to polarization and partial dissociation of the electrolyte molecules. In water molecules, when protium is replaced by a heavy isotope of hydrogen, the energy of breaking of hydrogen bonds increases and the process of their dissociation proceeds predominantly according to the scheme: HTO ↔ H+ + TO—. A part of the released protons can join water molecules to form the H3O+ ion. H3O+ and TO— ions are more mobile than other singly charged ions. The main characteristic that determines the suitability of electroosmotic membranes to the fractionation of hydrogen isotopes is proton conductivity. The released protons have anomalously high mobility due to their small size, tunnel and relay movement through hydrogen bonds between adjacent polar groups in the channels of the proton-conducting membranes. To ensure high proton conductivity in the pores and channels of the membranes, modifying substances are fixed, which contain the groups: –ОН- , –NH2, –NH, –SH, –COOH, –SO3H, acid salts and oxides, containing surface proton-conducting groups. To create proton-conducting membranes, it is possible to use surface-modified β-alumina (β-Al2O3(H3O+)) and protonated (H3O+) montmorillonite with ionic conductivity (5х103 – 4х104 Ohm х cm–1). The most effective are surface modifiers with negatively charged sulfonic groups. The imposition of an external electric field leads to the movement of ions in the electrolyte, which leads to a redistribution of the isotope ratio in the near-anode and cathode spaces.
- 1 January 2021
- Published by Taras Shevchenko National University of Kyiv in Visnyk of Taras Shevchenko National University of Kyiv. Geology
- No. 1 (92),p. 11-16
ELECTRO-OSMOTIC FRACTIONATION OF HYDROGEN ISOTOPES IN ELECTROLYTIC SOLUTIONS USING COMPOSITE PROTON-PERMEABLE MEMBRANES
Based on the analysis of the features of electroosmotic processes that are implemented in proton-conducting membranes, the possibility of fractioning hydrogen isotopes in electrolytes formed using tritiated water (HTO) is estimated. The interaction of the solution with the membranes in their channels leads to polarization and partial dissociation of the electrolyte molecules. In water molecules, when protium is replaced by a heavy isotope of hydrogen, the energy of breaking of hydrogen bonds increases and the process of their dissociation proceeds predominantly according to the scheme: HTO ↔ H+ + TO—. A part of the released protons can join water molecules to form the H3O+ ion. H3O+ and TO— ions are more mobile than other singly charged ions. The main characteristic that determines the suitability of electroosmotic membranes to the fractionation of hydrogen isotopes is proton conductivity. The released protons have anomalously high mobility due to their small size, tunnel and relay movement through hydrogen bonds between adjacent polar groups in the channels of the proton-conducting membranes. To ensure high proton conductivity in the pores and channels of the membranes, modifying substances are fixed, which contain the groups: –ОН- , –NH2, –NH, –SH, –COOH, –SO3H, acid salts and oxides, containing surface proton-conducting groups. To create proton-conducting membranes, it is possible to use surface-modified β-alumina (β-Al2O3(H3O+)) and protonated (H3O+) montmorillonite with ionic conductivity (5х103 – 4х104 Ohm х cm–1). The most effective are surface modifiers with negatively charged sulfonic groups. The imposition of an external electric field leads to the movement of ions in the electrolyte, which leads to a redistribution of the isotope ratio in the near-anode and cathode spaces.