Alessandro Messa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alessandro Messa has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ernesto Ciaramella
Scuola Superiore Sant’Anna
3 shared publications - Alessandro Sturniolo
Scuola Superiore Sant’Anna, Via Moruzzi 1, Pisa, Italy
2 shared publications - Giulio Cossu
Scuola Superiore SantAnna, Pisa, Italy
2 shared publications David Scaradozzi
Dipartimento di Ingegneria dell’Informazione, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131, Ancona, Italy
1 shared publicationE. Ertunc
Scuola Superiore Sant’Anna, Istituto di Tecnologie della Comunicazione, dell’Informazione e della Percezione (TeCIP), Pisa, Italy
1 shared publicationGiulio Cossu
1 shared publication
Latest Publications
- 21 February 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (5) , 1160-1163
Detecting WDM visible light signals by a single multi-color photodiode with MIMO processing
For the first time, to the best of our knowledge, we experimentally demonstrate that multiple-input–multiple-output (MIMO) processing allows using a single photodiode to detect simultaneously a wavelength-division multiplexing (WDM) visible light communications (VLC) signal. The photodiode has a triple junction, and when it is illuminated by a WDM signal, the junctions produce inherently three photocurrents that are unusable for detecting any of the WDM signals. However, by means of linear MIMO processing, we are able to recover the transmitted signals exactly. Bit error rate measurements confirm the effectiveness of the proposed solution. This opens a new scenario for practical WDM-VLC systems.
- 21 February 2020
- Published by Optica Publishing Group in Optics Letters
- Vol. 45 (5) , 1160-1163
Detecting WDM visible light signals by a single multi-color photodiode with MIMO processing
For the first time, to the best of our knowledge, we experimentally demonstrate that multiple-input–multiple-output (MIMO) processing allows using a single photodiode to detect simultaneously a wavelength-division multiplexing (WDM) visible light communications (VLC) signal. The photodiode has a triple junction, and when it is illuminated by a WDM signal, the junctions produce inherently three photocurrents that are unusable for detecting any of the WDM signals. However, by means of linear MIMO processing, we are able to recover the transmitted signals exactly. Bit error rate measurements confirm the effectiveness of the proposed solution. This opens a new scenario for practical WDM-VLC systems.
- 24 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 23 (9) , 1564-1567
VCSEL-Based 24 Gbit/s OWC Board-to-Board System
We experimentally demonstrate a 24-Gbit/s discrete multi-tone (DMT) optical wireless communication (OWC) system that exploits a commercial vertical-cavity surface-emitting laser (VCSEL) and a low-cost photo-diode (PD). The OWC link has a good tolerance to misalignment (9 mm at 12.5 Gbit/s and 1.5-m link distance), thus it does not require active alignment and tracking. It only needs passive alignment, which can be achieved with adequate mechanical precision.
- 24 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 23 (9) , 1564-1567
VCSEL-Based 24 Gbit/s OWC Board-to-Board System
We experimentally demonstrate a 24-Gbit/s discrete multi-tone (DMT) optical wireless communication (OWC) system that exploits a commercial vertical-cavity surface-emitting laser (VCSEL) and a low-cost photo-diode (PD). The OWC link has a good tolerance to misalignment (9 mm at 12.5 Gbit/s and 1.5-m link distance), thus it does not require active alignment and tracking. It only needs passive alignment, which can be achieved with adequate mechanical precision.
- 16 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 36 (1) , 194-202
Full-Fledged 10Base-T Ethernet Underwater Optical Wireless Communication System
Marine researchers and operators during their daily work need consistent data from the underwater environment to constantly monitor the habitat’s probes and the robots condition. For underwater applications, wireless communication are of paramount importance. Today, the needs for high-speed communication has prompted the exploration of the Underwater Optical Wireless Communications (UOWC) method. This article presents the design and validation aspects of the optical layer of a bidirectional UOWC system developed in the framework of the European Project SUNRISE, able to provide wireless connectivity compliant to 10Base-T Ethernet protocol (Manchester-coded signal with 10 Mbit/s data rate). The designed modems are made of two similar optical transceivers, each including a transmitter, a receiver unit and an optical power monitor part. The transmitter is based on an array of blue Light Emitting Diodes (LEDs), the receiver exploits a commercially available Avalanche Photodiode (APD) and the monitoring relies on a pin-photodiode. The modems, after a deep characterization in controlled environments, were proved to work with the required 10Base-T Ethernet, up to 7.5 m distance in shallow harbor waters. The complete optical system is intended to become a node of the SUNRISE infrastructure.
- 16 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 36 (1) , 194-202
Full-Fledged 10Base-T Ethernet Underwater Optical Wireless Communication System
Marine researchers and operators during their daily work need consistent data from the underwater environment to constantly monitor the habitat’s probes and the robots condition. For underwater applications, wireless communication are of paramount importance. Today, the needs for high-speed communication has prompted the exploration of the Underwater Optical Wireless Communications (UOWC) method. This article presents the design and validation aspects of the optical layer of a bidirectional UOWC system developed in the framework of the European Project SUNRISE, able to provide wireless connectivity compliant to 10Base-T Ethernet protocol (Manchester-coded signal with 10 Mbit/s data rate). The designed modems are made of two similar optical transceivers, each including a transmitter, a receiver unit and an optical power monitor part. The transmitter is based on an array of blue Light Emitting Diodes (LEDs), the receiver exploits a commercially available Avalanche Photodiode (APD) and the monitoring relies on a pin-photodiode. The modems, after a deep characterization in controlled environments, were proved to work with the required 10Base-T Ethernet, up to 7.5 m distance in shallow harbor waters. The complete optical system is intended to become a node of the SUNRISE infrastructure.