Xuhong Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xuhong Li has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Fredrik Tufvesson
Department of Electrical and Information Technology, Lund University, Lund, Sweden
12 shared publications - Erik Leitinger
Institute of Communication Networks and Satellite Communications, Graz University of Technology, Graz, Austria
6 shared publications - Xuesong Cai
Peking University
4 shared publications - Christian Nelson
Lund University
3 shared publications - Benjamin J. B. Deutschmann
Graz University of Technology
2 shared publications - Aarno Parssinen
University of Oulu
1 shared publication
Latest Publications
- 27 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 16931-16946
Adaptive Multipath-Based SLAM for Distributed MIMO Systems
Localizing users and mapping the environment using radio signals is a key task in emerging applications such as reliable low-latency communications, location-aware security, and safety-critical navigation. Recently introduced multipath-based simultaneous localization and mapping (SLAM) methods can jointly localize a mobile agent and map reflective surfaces in radio frequency (RF) environments. Most existing approaches assume that map features and their corresponding RF propagation paths are statistically independent, conditioned on the state of the mobile agent. This assumption neglects inherent dependencies that arise when a single reflective surface contributes to multiple propagation paths or when an agent communicates with multiple base stations. Existing approaches that aim to fuse information across propagation paths are further limited by their inability to perform ray tracing in RF environments with nonconvex geometries. In this paper, we propose a Bayesian multipath-based SLAM method for distributed multiple-input-multiple-output (MIMO) systems that addresses these limitations. In particular, we exploit amplitude statistics to establish adaptive, time-varying detection probabilities. Based on the resulting “soft” ray-tracing strategy, the proposed method can fuse information across propagation paths in RF environments with nonconvex geometries. A Bayesian estimation framework for the joint estimation of map features and agent state is developed by applying the message passing rules of the sum-product algorithm (SPA) to a factor graph representation of the proposed statistical model. We further introduce a new initialization procedure for reflective surfaces that enables the introduction of new surface states even when measurements arise solely from double-bounce paths. The proposed method is validated using both synthetic and real RF measurements obtained in challenging scenarios with nonconvex geometries and obstructed line-of-sight conditions. The results demonstrate that it provides accurate localization and mapping performance and approaches the posterior Cramér–Rao lower bound.
- 27 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 16931-16946
Adaptive Multipath-Based SLAM for Distributed MIMO Systems
Localizing users and mapping the environment using radio signals is a key task in emerging applications such as reliable low-latency communications, location-aware security, and safety-critical navigation. Recently introduced multipath-based simultaneous localization and mapping (SLAM) methods can jointly localize a mobile agent and map reflective surfaces in radio frequency (RF) environments. Most existing approaches assume that map features and their corresponding RF propagation paths are statistically independent, conditioned on the state of the mobile agent. This assumption neglects inherent dependencies that arise when a single reflective surface contributes to multiple propagation paths or when an agent communicates with multiple base stations. Existing approaches that aim to fuse information across propagation paths are further limited by their inability to perform ray tracing in RF environments with nonconvex geometries. In this paper, we propose a Bayesian multipath-based SLAM method for distributed multiple-input-multiple-output (MIMO) systems that addresses these limitations. In particular, we exploit amplitude statistics to establish adaptive, time-varying detection probabilities. Based on the resulting “soft” ray-tracing strategy, the proposed method can fuse information across propagation paths in RF environments with nonconvex geometries. A Bayesian estimation framework for the joint estimation of map features and agent state is developed by applying the message passing rules of the sum-product algorithm (SPA) to a factor graph representation of the proposed statistical model. We further introduce a new initialization procedure for reflective surfaces that enables the introduction of new surface states even when measurements arise solely from double-bounce paths. The proposed method is validated using both synthetic and real RF measurements obtained in challenging scenarios with nonconvex geometries and obstructed line-of-sight conditions. The results demonstrate that it provides accurate localization and mapping performance and approaches the posterior Cramér–Rao lower bound.
- Open Access
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Signal Processing
- Vol. 7, 356-372
Robust Localization in Modern Cellular Networks Using Global Map Features
Radio frequency (RF) signal-based localization using modern cellular networks has emerged as a promising solution to accurately locate objects in challenging environments. One of the most promising solutions for situations involving obstructed-line-of-sight (OLoS) and multipath propagation is multipathbased simultaneous localization and mapping (MP-SLAM) that employs map features (MFs), such as virtual anchors. This paper presents an extended MP-SLAM method that is augmented with a global map feature (GMF) repository. This repository stores consistent MFs of high quality that are collected during prior traversals. We integrate these GMFs back into the MP-SLAM framework via a probability hypothesis density (PHD) filter, which propagates GMF intensity functions over time. Extensive simulations, together with a challenging real-world experiment using LTE RF signals in a dense urban scenario with severe multipath propagation and inter-cell interference, demonstrate that our framework achieves robust and accurate localization, thereby showcasing its effectiveness in realistic modern cellular networks such as 5G or future 6G networks. It outperforms conventional proprioceptive sensor-based localization and conventional MP-SLAM methods, and achieves reliable localization even under adverse signal conditions.
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Signal Processing
- Vol. 7, 356-372
Open AccessRobust Localization in Modern Cellular Networks Using Global Map Features
Radio frequency (RF) signal-based localization using modern cellular networks has emerged as a promising solution to accurately locate objects in challenging environments. One of the most promising solutions for situations involving obstructed-line-of-sight (OLoS) and multipath propagation is multipathbased simultaneous localization and mapping (MP-SLAM) that employs map features (MFs), such as virtual anchors. This paper presents an extended MP-SLAM method that is augmented with a global map feature (GMF) repository. This repository stores consistent MFs of high quality that are collected during prior traversals. We integrate these GMFs back into the MP-SLAM framework via a probability hypothesis density (PHD) filter, which propagates GMF intensity functions over time. Extensive simulations, together with a challenging real-world experiment using LTE RF signals in a dense urban scenario with severe multipath propagation and inter-cell interference, demonstrate that our framework achieves robust and accurate localization, thereby showcasing its effectiveness in realistic modern cellular networks such as 5G or future 6G networks. It outperforms conventional proprioceptive sensor-based localization and conventional MP-SLAM methods, and achieves reliable localization even under adverse signal conditions.
- Open Access
- 4 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Vehicular Technology Magazine
- Vol. 20 (3) , 49-57
Understanding Subterahertz Radio Channels: The Impact of Beamforming on Wireless System Design
Wireless connectivity in the subterahertz (sub-THz) band, spanning from 100 GHz to 300 GHz, is envisioned as an enhanced feature of 6G and beyond. Due to significant propagation losses at these frequencies, the transmission of sub-THz signals relies heavily on high antenna directivity, realized by beamforming. In this article, we present a newly developed sub-THz stored channel model, and perform a realistic evaluation of the impact of beamforming on sub-THz link establishment and data transmission. Unlike the propagation channel between the transmitting and receiving antennas, the radio channel is observed by a pair of beams. Incorporating the impact of beamforming into measured sub-THz propagation channel data enables to gain insights into the key factors that determine, among others, sub-THz beam alignment strategy and waveform design, ultimately enhancing spectral efficiency.
- 4 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Vehicular Technology Magazine
- Vol. 20 (3) , 49-57
Open AccessUnderstanding Subterahertz Radio Channels: The Impact of Beamforming on Wireless System Design
Wireless connectivity in the subterahertz (sub-THz) band, spanning from 100 GHz to 300 GHz, is envisioned as an enhanced feature of 6G and beyond. Due to significant propagation losses at these frequencies, the transmission of sub-THz signals relies heavily on high antenna directivity, realized by beamforming. In this article, we present a newly developed sub-THz stored channel model, and perform a realistic evaluation of the impact of beamforming on sub-THz link establishment and data transmission. Unlike the propagation channel between the transmitting and receiving antennas, the radio channel is observed by a pair of beams. Incorporating the impact of beamforming into measured sub-THz propagation channel data enables to gain insights into the key factors that determine, among others, sub-THz beam alignment strategy and waveform design, ultimately enhancing spectral efficiency.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (4) , 2074-2085
A Wideband Distributed Massive MIMO Channel Sounder for Communication and Sensing
Channel sounding is a vital step in the design and deployment of wireless communication systems. In this paper, we present the design and implementation of a coherent distributed massive MIMO channel sounder operating at 5-6 GHz with a bandwidth of 400MHz based on the NI USRP X410. Through the integration of multiple transceiver chains and RF switches, the design facilitates the use of a larger number of antennas without significant compromise in dynamic capability. Our current implementation is capable of measuring thousands of antenna combinations in tens of milliseconds. Every radio frequency switch is seamlessly integrated with a 16-element antenna array, allowing phase-coherent multi-node dual-polarized double-directional dynamic channel measurements for multistatic integrated sensing and communication (ISAC) applications. In addition, the channel sounder features real-time processing to reduce the data stream to the host computer and increase the signal-to-noise ratio. The correct operation of the sounder is demonstrated through two measurements in an indoor laboratory environment. The first measurement entails a single antenna robot as transmitter and 128 distributed receiving antennas. The second measurement demonstrates a passive sensing scenario with a walking person. We evaluate the results of both measurements using the super-resolution algorithm SAGE. The results demonstrate the great potential of the presented sounding system for providing high-quality radio channel measurements, contributing to high-resolution channel estimation, characterization, and active and passive sensing in realistic and dynamic scenarios.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (4) , 2074-2085
A Wideband Distributed Massive MIMO Channel Sounder for Communication and Sensing
Channel sounding is a vital step in the design and deployment of wireless communication systems. In this paper, we present the design and implementation of a coherent distributed massive MIMO channel sounder operating at 5-6 GHz with a bandwidth of 400MHz based on the NI USRP X410. Through the integration of multiple transceiver chains and RF switches, the design facilitates the use of a larger number of antennas without significant compromise in dynamic capability. Our current implementation is capable of measuring thousands of antenna combinations in tens of milliseconds. Every radio frequency switch is seamlessly integrated with a 16-element antenna array, allowing phase-coherent multi-node dual-polarized double-directional dynamic channel measurements for multistatic integrated sensing and communication (ISAC) applications. In addition, the channel sounder features real-time processing to reduce the data stream to the host computer and increase the signal-to-noise ratio. The correct operation of the sounder is demonstrated through two measurements in an indoor laboratory environment. The first measurement entails a single antenna robot as transmitter and 128 distributed receiving antennas. The second measurement demonstrates a passive sensing scenario with a walking person. We evaluate the results of both measurements using the super-resolution algorithm SAGE. The results demonstrate the great potential of the presented sounding system for providing high-quality radio channel measurements, contributing to high-resolution channel estimation, characterization, and active and passive sensing in realistic and dynamic scenarios.
- Open Access
A Wideband Distributed Massive MIMO Channel Sounder for Communication and Sensing
Channel sounding is a vital step in understanding wireless channels for the design and deployment of wireless communication systems. In this paper, we present the design and implementation of a coherent distributed massive MIMO channel sounder operating at 5-6 GHz with a bandwidth of 400 MHz based on the NI USRP X410. Through the integration of transceiver chains and RF switches, the design facilitates the use of a larger number of antennas without significant compromise in dynamic capability. Our current implementation is capable of measuring thousands of antenna combinations within tens of milliseconds. Every radio frequency switch is seamlessly integrated with a 16-element antenna array, making the antennas more practical to be transported and flexibly distributed. In addition, the channel sounder features real-time processing to reduce the data stream to the host computer and increase the signal-to-noise ratio. The design and implementation are verified through two measurements in an indoor laboratory environment. The first measurement entails a single-antenna robot as transmitter and 128 distributed receiving antennas. The second measurement demonstrates a passive sensing scenario with a walking person. We evaluate the results of both measurements using the super-resolution algorithm SAGE. The results demonstrate the great potential of the presented sounding system for providing high-quality radio channel measurements, contributing to high-resolution channel estimation, characterization, and active and passive sensing in realistic and dynamic scenarios.
Open AccessA Wideband Distributed Massive MIMO Channel Sounder for Communication and Sensing
Channel sounding is a vital step in understanding wireless channels for the design and deployment of wireless communication systems. In this paper, we present the design and implementation of a coherent distributed massive MIMO channel sounder operating at 5-6 GHz with a bandwidth of 400 MHz based on the NI USRP X410. Through the integration of transceiver chains and RF switches, the design facilitates the use of a larger number of antennas without significant compromise in dynamic capability. Our current implementation is capable of measuring thousands of antenna combinations within tens of milliseconds. Every radio frequency switch is seamlessly integrated with a 16-element antenna array, making the antennas more practical to be transported and flexibly distributed. In addition, the channel sounder features real-time processing to reduce the data stream to the host computer and increase the signal-to-noise ratio. The design and implementation are verified through two measurements in an indoor laboratory environment. The first measurement entails a single-antenna robot as transmitter and 128 distributed receiving antennas. The second measurement demonstrates a passive sensing scenario with a walking person. We evaluate the results of both measurements using the super-resolution algorithm SAGE. The results demonstrate the great potential of the presented sounding system for providing high-quality radio channel measurements, contributing to high-resolution channel estimation, characterization, and active and passive sensing in realistic and dynamic scenarios.
- Open Access
A Belief Propagation Algorithm for Multipath-based SLAM with Multiple Map Features: A mmWave MIMO Application
In this paper, we present a multipath-based simultaneous localization and mapping (SLAM) algorithm that continuously adapts mulitiple map feature (MF) models describing specularly reflected multipath components (MPCs) from flat surfaces and point-scattered MPCs, respectively. We develop a Bayesian model for sequential detection and estimation of interacting MF model parameters, MF states and mobile agent's state including position and orientation. The Bayesian model is represented by a factor graph enabling the use of belief propagation (BP) for efficient computation of the marginal posterior distributions. The algorithm also exploits amplitude information enabling reliable detection of weak MFs associated with MPCs of very low signal-to-noise ratios (SNRs). The performance of the proposed algorithm is evaluated using real millimeter-wave (mmWave) multiple-input-multiple-output (MIMO) measurements with single base station setup. Results demonstrate the excellent localization and mapping performance of the proposed algorithm in challenging dynamic outdoor scenarios.
Open AccessA Belief Propagation Algorithm for Multipath-based SLAM with Multiple Map Features: A mmWave MIMO Application
In this paper, we present a multipath-based simultaneous localization and mapping (SLAM) algorithm that continuously adapts mulitiple map feature (MF) models describing specularly reflected multipath components (MPCs) from flat surfaces and point-scattered MPCs, respectively. We develop a Bayesian model for sequential detection and estimation of interacting MF model parameters, MF states and mobile agent's state including position and orientation. The Bayesian model is represented by a factor graph enabling the use of belief propagation (BP) for efficient computation of the marginal posterior distributions. The algorithm also exploits amplitude information enabling reliable detection of weak MFs associated with MPCs of very low signal-to-noise ratios (SNRs). The performance of the proposed algorithm is evaluated using real millimeter-wave (mmWave) multiple-input-multiple-output (MIMO) measurements with single base station setup. Results demonstrate the excellent localization and mapping performance of the proposed algorithm in challenging dynamic outdoor scenarios.
- Open Access
Distributed MIMO Measurements for Integrated Communication and Sensing in an Industrial Environment
Many concepts for future generations of wireless communication systems use coherent processing of signals from many distributed antennas. The aim is to improve communication reliability, capacity, and energy efficiency and provide possibilities for new applications through integrated communication and sensing. The large bandwidths available in the higher bands have inspired much work regarding sensing in the millimeter-wave (mmWave) and sub-THz bands; however, the sub-6 GHz cellular bands will still be the main provider of wide cellular coverage due to the more favorable propagation conditions. In this paper, we present a measurement system and results of sub-6 GHz distributed multiple-input-multiple-output (MIMO) measurements performed in an industrial environment. From the measurements, we evaluated the diversity for both large-scale and small-scale fading and characterized the link reliability. We also analyzed the possibility of multistatic sensing and positioning of users in the environment, with the initial results showing a mean-square error below 20 on the estimated position. Further, the results clearly showed that new channel models are needed that are spatially consistent and deal with the nonstationary channel properties among the antennas.Open AccessDistributed MIMO Measurements for Integrated Communication and Sensing in an Industrial Environment
Many concepts for future generations of wireless communication systems use coherent processing of signals from many distributed antennas. The aim is to improve communication reliability, capacity, and energy efficiency and provide possibilities for new applications through integrated communication and sensing. The large bandwidths available in the higher bands have inspired much work regarding sensing in the millimeter-wave (mmWave) and sub-THz bands; however, the sub-6 GHz cellular bands will still be the main provider of wide cellular coverage due to the more favorable propagation conditions. In this paper, we present a measurement system and results of sub-6 GHz distributed multiple-input-multiple-output (MIMO) measurements performed in an industrial environment. From the measurements, we evaluated the diversity for both large-scale and small-scale fading and characterized the link reliability. We also analyzed the possibility of multistatic sensing and positioning of users in the environment, with the initial results showing a mean-square error below 20 on the estimated position. Further, the results clearly showed that new channel models are needed that are spatially consistent and deal with the nonstationary channel properties among the antennas. - Open Access
Large Intelligent Surface Measurements for Joint Communication and Sensing
Multiple concepts for future generations of wireless communication standards utilize coherent processing of signals from many distributed antennas. Names for these concepts include distributed MIMO, cell-free massive MIMO, XL-MIMO, and large intelligent surfaces. They aim to improve communication reliability, capacity, as well as energy efficiency and provide possibilities for new applications through joint communication and sensing. One such recently proposed solution is the concept of RadioWeaves. It proposes a new radio infrastructure for distributed MIMO with distributed internal processing, storage, and compute resources integrated into the infrastructure. The large bandwidths available in the higher bands have inspired much work regarding sensing in the mmWave- and sub-THz-bands, however, sub-6 GHz cellular bands will still be the main provider of broad cellular coverage due to the more favorable propagation conditions. In this paper, we present results from a sub-6 GHz measurement campaign targeting the non-stationary spatial channel statistics for a large RadioWeave and the temporal non-stationarity in a dynamic scenario with RadioWeaves. From the results, we also predict the possibility of multi-static sensing and positioning of users in the environment.
Open AccessLarge Intelligent Surface Measurements for Joint Communication and Sensing
Multiple concepts for future generations of wireless communication standards utilize coherent processing of signals from many distributed antennas. Names for these concepts include distributed MIMO, cell-free massive MIMO, XL-MIMO, and large intelligent surfaces. They aim to improve communication reliability, capacity, as well as energy efficiency and provide possibilities for new applications through joint communication and sensing. One such recently proposed solution is the concept of RadioWeaves. It proposes a new radio infrastructure for distributed MIMO with distributed internal processing, storage, and compute resources integrated into the infrastructure. The large bandwidths available in the higher bands have inspired much work regarding sensing in the mmWave- and sub-THz-bands, however, sub-6 GHz cellular bands will still be the main provider of broad cellular coverage due to the more favorable propagation conditions. In this paper, we present results from a sub-6 GHz measurement campaign targeting the non-stationary spatial channel statistics for a large RadioWeave and the temporal non-stationarity in a dynamic scenario with RadioWeaves. From the results, we also predict the possibility of multi-static sensing and positioning of users in the environment.
- Open Access
High-Resolution Channel Sounding and Parameter Estimation in Multi-Site Cellular Networks
Accurate understanding of electromagnetic propagation properties in real environments is necessary for efficient design and deployment of cellular systems. In this paper, we show a method to estimate high-resolution channel parameters with a massive antenna array in real network deployments. An antenna array mounted on a vehicle is used to receive downlink long-term evolution (LTE) reference signals from neighboring base stations (BS) with mutual interference. Delay and angular information of multipath components is estimated with a novel inter-cell interference cancellation algorithm and an extension of the RIMAX algorithm. The estimated high-resolution channel parameters are consistent with the movement pattern of the vehicle and the geometry of the environment and allow for refined channel modeling and precise cellular positioning.
Open AccessHigh-Resolution Channel Sounding and Parameter Estimation in Multi-Site Cellular Networks
Accurate understanding of electromagnetic propagation properties in real environments is necessary for efficient design and deployment of cellular systems. In this paper, we show a method to estimate high-resolution channel parameters with a massive antenna array in real network deployments. An antenna array mounted on a vehicle is used to receive downlink long-term evolution (LTE) reference signals from neighboring base stations (BS) with mutual interference. Delay and angular information of multipath components is estimated with a novel inter-cell interference cancellation algorithm and an extension of the RIMAX algorithm. The estimated high-resolution channel parameters are consistent with the movement pattern of the vehicle and the geometry of the environment and allow for refined channel modeling and precise cellular positioning.
- 15 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (10) , 8385-8402
Sequential Detection and Estimation of Multipath Channel Parameters Using Belief Propagation
This paper proposes a belief propagation (BP)-based algorithm for sequential detection and estimation of multipath component (MPC) parameters based on radio signals. Under dynamic channel conditions with moving transmitter/receiver, the number of MPCs, the MPC dispersion parameters, and the number of false alarm contributions are unknown and time-varying. We develop a Bayesian model for sequential detection and estimation of MPC dispersion parameters, and represent it by a factor graph enabling the use of BP for efficient computation of the marginal posterior distributions. At each time step, a snapshot-based parametric channel estimator provides parameter estimates of a set of MPCs which are used as noisy measurements by the proposed BP-based algorithm. It performs joint probabilistic data association, and estimation of the time-varying MPC parameters and the mean number of false alarm measurements, by means of the sum-product algorithm rules. The algorithm also exploits amplitude information enabling the reliable detection of “weak” MPCs with very low component signal-to-noise ratios (SNRs). The performance of the proposed algorithm compares well to state-of-the-art algorithms for high SNR MPCs, but it significantly outperforms them for medium or low SNR MPCs. Results using real radio measurements demonstrate the excellent performance of the proposed algorithm in realistic and challenging scenarios.
- 15 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 21 (10) , 8385-8402
Sequential Detection and Estimation of Multipath Channel Parameters Using Belief Propagation
This paper proposes a belief propagation (BP)-based algorithm for sequential detection and estimation of multipath component (MPC) parameters based on radio signals. Under dynamic channel conditions with moving transmitter/receiver, the number of MPCs, the MPC dispersion parameters, and the number of false alarm contributions are unknown and time-varying. We develop a Bayesian model for sequential detection and estimation of MPC dispersion parameters, and represent it by a factor graph enabling the use of BP for efficient computation of the marginal posterior distributions. At each time step, a snapshot-based parametric channel estimator provides parameter estimates of a set of MPCs which are used as noisy measurements by the proposed BP-based algorithm. It performs joint probabilistic data association, and estimation of the time-varying MPC parameters and the mean number of false alarm measurements, by means of the sum-product algorithm rules. The algorithm also exploits amplitude information enabling the reliable detection of “weak” MPCs with very low component signal-to-noise ratios (SNRs). The performance of the proposed algorithm compares well to state-of-the-art algorithms for high SNR MPCs, but it significantly outperforms them for medium or low SNR MPCs. Results using real radio measurements demonstrate the excellent performance of the proposed algorithm in realistic and challenging scenarios.