Marija Tkalčević
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marija Tkalčević has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Maja Mičetić
Ruđer Bošković Institute, Bijenička cesta 54, 10000 Zagreb, Croatia
9 shared publications - Ivana Periša
Ruđer Bošković Institute, Bijenička cesta 54, 10000 Zagreb, Croatia
5 shared publications - Lovro Basioli
Ruđer Bošković Institute, Bijenička cesta 54, 10000 Zagreb, Croatia
5 shared publications - S. Bernstorff
Elettra-Sincrotrone Trieste S.C.p.A., Strada Statale 14 km 163.5 in AREA Science Park, 34149 Basoviz-za/Trieste, Italy
4 shared publications - Goran Dražić
National Institute of Chemistry, Hajdrihova 19, P.O. Box 660, SI-1001 Ljubljana, Slovenia
3 shared publications - Iva Bogdanović Radović
Ruđer Bošković Institute
3 shared publications
Latest Publications
- 8 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (20) , 10395-10408
Ge and Core/Shell Ge/Al Quantum Dot Lattices in Amorphous SiC Matrix for Application in Photo- and Thermosensitive Devices
- 8 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (20) , 10395-10408
Ge and Core/Shell Ge/Al Quantum Dot Lattices in Amorphous SiC Matrix for Application in Photo- and Thermosensitive Devices
- Open Access
- 27 February 2025
- Published by Elsevier in Materialia
- Vol. 39
Epitaxial growth mechanism and structural characterization of spinel-type LixMn2O4 electrodes realized via pulsed laser deposition
- 27 February 2025
- Published by Elsevier in Materialia
- Vol. 39
Open AccessEpitaxial growth mechanism and structural characterization of spinel-type LixMn2O4 electrodes realized via pulsed laser deposition
- Open Access
- 27 November 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (23) , 1906
3D Lattices of Core/Shell Ge/Mn Quantum Dots in an Alumina Matrix: Structure, Fabrication, and Photo-Electrical Properties
Materials consisting of quantum dots with a semiconductor-core, metal–shell structure often have exciting and tunable photo-electrical properties in a large range of values, and they are adjustable by core and shell structure parameters. Here, we investigated the influence of Mn-shell addition to Ge quantum dots formed in an alumina matrix by magnetron sputtering deposition. We show a well-achieved formation of the 3D regular lattices of Ge-core, Mn-rich shell quantum dots, which were achieved by self-assembled growth mode. Intermixing of Ge and Mn in the shell was observed. The optical, electrical, and photo-conversion properties were strongly affected by the addition of the Mn shell and its thickness. The shell induced changes in the optical gap of the materials and caused an increase in the material’s conductivity. The most significant changes occurred in the photo-electrical properties of the materials. Their quantum efficiency, i.e., the efficiency of the conversion of photon energy to the electrical current, was very strongly enhanced by the shell addition, though it depended on its thickness. The best results were obtained for the thinnest shell added to the Ge core, for which the maximal quantum efficiency was significantly enhanced by more than 100%. The effect was, evidently, the consequence of multiple exciton generation, which was enhanced by the shell addition. The obtained materials offer great potential for various applications in photo-sensitive devices.
- 27 November 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (23) , 1906
Open Access3D Lattices of Core/Shell Ge/Mn Quantum Dots in an Alumina Matrix: Structure, Fabrication, and Photo-Electrical Properties
Materials consisting of quantum dots with a semiconductor-core, metal–shell structure often have exciting and tunable photo-electrical properties in a large range of values, and they are adjustable by core and shell structure parameters. Here, we investigated the influence of Mn-shell addition to Ge quantum dots formed in an alumina matrix by magnetron sputtering deposition. We show a well-achieved formation of the 3D regular lattices of Ge-core, Mn-rich shell quantum dots, which were achieved by self-assembled growth mode. Intermixing of Ge and Mn in the shell was observed. The optical, electrical, and photo-conversion properties were strongly affected by the addition of the Mn shell and its thickness. The shell induced changes in the optical gap of the materials and caused an increase in the material’s conductivity. The most significant changes occurred in the photo-electrical properties of the materials. Their quantum efficiency, i.e., the efficiency of the conversion of photon energy to the electrical current, was very strongly enhanced by the shell addition, though it depended on its thickness. The best results were obtained for the thinnest shell added to the Ge core, for which the maximal quantum efficiency was significantly enhanced by more than 100%. The effect was, evidently, the consequence of multiple exciton generation, which was enhanced by the shell addition. The obtained materials offer great potential for various applications in photo-sensitive devices.
- Open Access
Properties of SiC and Si3N4 Thin Films Containing Self-Assembled Gold Nanoparticles
The properties of semiconductor materials can be strongly affected by the addition of metallic nanoparticles. Here we investigate the properties of SiC + Au and Si3N4 + Au thin films prepared by magnetron sputtering deposition followed by thermal annealing. The influence of gold addition on the optical and electrical properties is explored. We show the formation of self-assembled Au nanoparticles in SiC and Si3N4, with the size and arrangement properties determined by the deposition and annealing conditions. Both SiC- and Si3N4-based films show an increase in the overall absorption with increasing Au content, and its decrease with increasing annealing temperature. All films show the presence of surface plasmon resonance, whose peaks shift toward larger wavelengths with increasing Au nanoparticle size. The resistivity significantly drops with the Au content increase for both types of matrices, although the resistivity of Si3N4-based films is much higher. The incorporated quantity of Au in the host matrix was chosen in such a way to demonstrate that a huge range of optical and electrical characteristics is achievable. The materials are very interesting for application in opto-electronic devices.
Open AccessProperties of SiC and Si3N4 Thin Films Containing Self-Assembled Gold Nanoparticles
The properties of semiconductor materials can be strongly affected by the addition of metallic nanoparticles. Here we investigate the properties of SiC + Au and Si3N4 + Au thin films prepared by magnetron sputtering deposition followed by thermal annealing. The influence of gold addition on the optical and electrical properties is explored. We show the formation of self-assembled Au nanoparticles in SiC and Si3N4, with the size and arrangement properties determined by the deposition and annealing conditions. Both SiC- and Si3N4-based films show an increase in the overall absorption with increasing Au content, and its decrease with increasing annealing temperature. All films show the presence of surface plasmon resonance, whose peaks shift toward larger wavelengths with increasing Au nanoparticle size. The resistivity significantly drops with the Au content increase for both types of matrices, although the resistivity of Si3N4-based films is much higher. The incorporated quantity of Au in the host matrix was chosen in such a way to demonstrate that a huge range of optical and electrical characteristics is achievable. The materials are very interesting for application in opto-electronic devices.
- Open Access
Ge/Al and Ge/Si3N4/Al Core/Shell Quantum Dot Lattices in Alumina: Boosting the Spectral Response by Tensile Strain
We investigated the production conditions and optoelectrical properties of thin film material consisting of regularly ordered core/shell Ge/Al and Ge/Si3N4/Al quantum dots (QDs) in an alumina matrix. The materials were produced by self–assembled growth achieved by means of multilayer magnetron sputtering deposition. We demonstrated the successful fabrication of well-ordered 3D lattices of Ge/Al and Ge/Si3N4/Al core/shell quantum dots with a body-centred tetragonal arrangement within the Al2O3 matrix. The addition of shells to the Ge core enables a strong tuning of the optical and electrical properties of the material. An Al shell induces a bandgap shift toward smaller energies, and, in addition, it prevents Ge oxidation. The addition of a thin Si3N4 shell induces huge changes in the material spectral response, i.e., in the number of extracted excitons produced by a single photon. It increases both the absolute value and the width of the spectral response. For the best sample, we achieved an enhancement of over 250% of the produced number of excitons in the measured energy range. The observed changes are, as it seems, the consequence of the large tensile strain in Ge QDs which is induced by the Si3N4 shell addition and which is measured to be about 3% for the most strained QDs. The tensile strain causes activation of the direct bandgap of germanium, which has a very strong effect on the spectral response of the material.
Open AccessGe/Al and Ge/Si3N4/Al Core/Shell Quantum Dot Lattices in Alumina: Boosting the Spectral Response by Tensile Strain
We investigated the production conditions and optoelectrical properties of thin film material consisting of regularly ordered core/shell Ge/Al and Ge/Si3N4/Al quantum dots (QDs) in an alumina matrix. The materials were produced by self–assembled growth achieved by means of multilayer magnetron sputtering deposition. We demonstrated the successful fabrication of well-ordered 3D lattices of Ge/Al and Ge/Si3N4/Al core/shell quantum dots with a body-centred tetragonal arrangement within the Al2O3 matrix. The addition of shells to the Ge core enables a strong tuning of the optical and electrical properties of the material. An Al shell induces a bandgap shift toward smaller energies, and, in addition, it prevents Ge oxidation. The addition of a thin Si3N4 shell induces huge changes in the material spectral response, i.e., in the number of extracted excitons produced by a single photon. It increases both the absolute value and the width of the spectral response. For the best sample, we achieved an enhancement of over 250% of the produced number of excitons in the measured energy range. The observed changes are, as it seems, the consequence of the large tensile strain in Ge QDs which is induced by the Si3N4 shell addition and which is measured to be about 3% for the most strained QDs. The tensile strain causes activation of the direct bandgap of germanium, which has a very strong effect on the spectral response of the material.
- Open Access
Multiple Exciton Generation in 3D-Ordered Networks of Ge Quantum Wires in Alumina Matrix
Thin films containing 3D-ordered semiconductor quantum wires offer a great tool to improve the properties of photosensitive devices. In the present work, we investigate the photo-generated current in thin films consisting of an interconnected 3D-ordered network of Ge quantum wires in an alumina matrix. The films are prepared using nitrogen-assisted magnetron sputtering co-deposition of Ge and Al2O3. We demonstrate a strong photocurrent generation in the films, much stronger than in similar films containing Ge quantum dots. The enhanced photocurrent generation is the consequence of the multiple exciton generation and the films’ specific structure that allows for efficient carrier transport. Thin film with the largest nitrogen content showed enhanced performance compared to other thin films with 1.6 excitons created after absorption of a single photon at an energy nearly equal to the double bandgap value. The bandgap value depends on the geometrical properties of the quantum wires, and it is close to the maximum of the solar irradiance in this case. In addition, we show that the multiple exciton generation is the most pronounced at the photon energy values equal to multiple values of the thin film bandgap.
Open AccessMultiple Exciton Generation in 3D-Ordered Networks of Ge Quantum Wires in Alumina Matrix
Thin films containing 3D-ordered semiconductor quantum wires offer a great tool to improve the properties of photosensitive devices. In the present work, we investigate the photo-generated current in thin films consisting of an interconnected 3D-ordered network of Ge quantum wires in an alumina matrix. The films are prepared using nitrogen-assisted magnetron sputtering co-deposition of Ge and Al2O3. We demonstrate a strong photocurrent generation in the films, much stronger than in similar films containing Ge quantum dots. The enhanced photocurrent generation is the consequence of the multiple exciton generation and the films’ specific structure that allows for efficient carrier transport. Thin film with the largest nitrogen content showed enhanced performance compared to other thin films with 1.6 excitons created after absorption of a single photon at an energy nearly equal to the double bandgap value. The bandgap value depends on the geometrical properties of the quantum wires, and it is close to the maximum of the solar irradiance in this case. In addition, we show that the multiple exciton generation is the most pronounced at the photon energy values equal to multiple values of the thin film bandgap.
- Open Access
- 1 October 2021
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 325, 111306
3D networks of nanopores in alumina: Structural and optical properties
- 1 October 2021
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 325, 111306
Open Access3D networks of nanopores in alumina: Structural and optical properties
- Open Access
- 13 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1363
3D Networks of Ge Quantum Wires in Amorphous Alumina Matrix
Recently demonstrated 3D networks of Ge quantum wires in an alumina matrix, produced by a simple magnetron sputtering deposition enables the realization of nanodevices with tailored conductivity and opto-electrical properties. Their growth and ordering mechanisms as well as possibilities in the design of their structure have not been explored yet. Here, we investigate a broad range of deposition conditions leading to the formation of such quantum wire networks. The resulting structures show an extraordinary tenability of the networks’ geometrical properties. These properties are easily controllable by deposition temperature and Ge concentration. The network’s geometry is shown to retain the same basic structure, adjusting its parameters according to Ge concentration in the material. In addition, the networks’ growth and ordering mechanisms are explained. Furthermore, optical measurements demonstrate that the presented networks show strong confinement effects controllable by their geometrical parameters. Interestingly, energy shift is the largest for the longest quantum wires, and quantum wire length is the main parameter for control of confinement. Presented results demonstrate a method to produce unique materials with designable properties by a simple self-assembled growth method and reveal a self-assembling growth mechanism of novel 3D ordered Ge nanostructures with highly designable optical properties.
- 13 July 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (7) , 1363
Open Access3D Networks of Ge Quantum Wires in Amorphous Alumina Matrix
Recently demonstrated 3D networks of Ge quantum wires in an alumina matrix, produced by a simple magnetron sputtering deposition enables the realization of nanodevices with tailored conductivity and opto-electrical properties. Their growth and ordering mechanisms as well as possibilities in the design of their structure have not been explored yet. Here, we investigate a broad range of deposition conditions leading to the formation of such quantum wire networks. The resulting structures show an extraordinary tenability of the networks’ geometrical properties. These properties are easily controllable by deposition temperature and Ge concentration. The network’s geometry is shown to retain the same basic structure, adjusting its parameters according to Ge concentration in the material. In addition, the networks’ growth and ordering mechanisms are explained. Furthermore, optical measurements demonstrate that the presented networks show strong confinement effects controllable by their geometrical parameters. Interestingly, energy shift is the largest for the longest quantum wires, and quantum wire length is the main parameter for control of confinement. Presented results demonstrate a method to produce unique materials with designable properties by a simple self-assembled growth method and reveal a self-assembling growth mechanism of novel 3D ordered Ge nanostructures with highly designable optical properties.
- Open Access
Deposition of Thin Alumina Films Containing 3D Ordered Network of Nanopores on Porous Substrates
Self-supporting thin films containing nanopores are very promising materials for use for multiple applications, especially in nanofiltration. Here, we present a method for the production of nanomembranes containing a 3D ordered network of nanopores in an alumina matrix, with a diameter of about 1 nm and a body centered tetragonal structure of the network nodes. The material is produced by the magnetron sputtering deposition of a 3D ordered network of Ge nanowires in an alumina matrix, followed by a specific annealing process resulting in the evaporation of Ge. We demonstrate that the films can be easily grown on commercially available alumina substrates containing larger pores with diameters between 20 and 400 nm. We have determined the minimal film thickness needed to entirely cover the larger pores. We believe that these films have the potential for applications in the fields of filtration, separation and sensing.
Open AccessDeposition of Thin Alumina Films Containing 3D Ordered Network of Nanopores on Porous Substrates
Self-supporting thin films containing nanopores are very promising materials for use for multiple applications, especially in nanofiltration. Here, we present a method for the production of nanomembranes containing a 3D ordered network of nanopores in an alumina matrix, with a diameter of about 1 nm and a body centered tetragonal structure of the network nodes. The material is produced by the magnetron sputtering deposition of a 3D ordered network of Ge nanowires in an alumina matrix, followed by a specific annealing process resulting in the evaporation of Ge. We demonstrate that the films can be easily grown on commercially available alumina substrates containing larger pores with diameters between 20 and 400 nm. We have determined the minimal film thickness needed to entirely cover the larger pores. We believe that these films have the potential for applications in the fields of filtration, separation and sensing.