Sotiris A. Tegos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sotiris A. Tegos has a total of 141 co-authors. Here are the top co-authors by number of shared publications:
- George K. Karagiannidis
Aristotle University of Thessaloniki
95 shared publications - Panagiotis D. Diamantoulakis
Aristotle University of Thessaloniki, Thessaloniki, Greece
88 shared publications - Dimitrios Tyrovolas
Aristotle University of Thessaloniki
23 shared publications - Panagiotis Sarigiannidis
Department of Electrical and Computer Engineering, University of Western Macedonia, 50131 Kozani, Greece
16 shared publications - Yue Xiao
Southwest Jiaotong University
16 shared publications - Nikos G. Evgenidis
Department of Electrical and Computer Engineering, Aristotle University of Thessaloniki, Thessaloniki, Greece
13 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (20) , 46389-46403
Secure ISAC Beamforming Design: A BCRB Approach for Target-Angle Uncertainty
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (20) , 46389-46403
Secure ISAC Beamforming Design: A BCRB Approach for Target-Angle Uncertainty
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (10) , 25607-25612
Beamforming Design for Pinching Antenna Systems With Multiple Receive Antennas
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (10) , 25607-25612
Beamforming Design for Pinching Antenna Systems With Multiple Receive Antennas
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 16040-16055
Location-Driven Programmable Wireless Environments Through Light-Emitting RIS (LeRIS)
As 6G wireless networks seek to enable robust and dynamic programmable wireless environments (PWEs), reconfigurable intelligent surfaces (RISs) have emerged as a cornerstone for controlling electromagnetic wave propagation. However, realizing the potential of RISs for demanding PWE applications depends on precise and real-time user localization, especially in scenarios with random receiver orientations and inherent hardware imperfections. To address this challenge, we propose a novel optical localization framework that integrates conventional ceiling-mounted LEDs with light-emitting reconfigurable intelligent surfaces (LeRISs). By leveraging the spatial diversity offered by the LeRIS architecture, the framework introduces robust signal paths that improve localization accuracy and reduce errors under varying orientations. To this end, we derive a system of equations for received signal strength-based localization that accounts for random receiver orientations and imposes spatial constraints on LED placement, ensuring unique and reliable solutions. Finally, our simulation results demonstrate that the proposed framework achieves precise beam control and high spectral efficiency even for RISs with large number of reflecting elements by tightly coupling the localization process with the beamforming configuration, allowing accurate direction estimation and robust PWE operation.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 16040-16055
Location-Driven Programmable Wireless Environments Through Light-Emitting RIS (LeRIS)
As 6G wireless networks seek to enable robust and dynamic programmable wireless environments (PWEs), reconfigurable intelligent surfaces (RISs) have emerged as a cornerstone for controlling electromagnetic wave propagation. However, realizing the potential of RISs for demanding PWE applications depends on precise and real-time user localization, especially in scenarios with random receiver orientations and inherent hardware imperfections. To address this challenge, we propose a novel optical localization framework that integrates conventional ceiling-mounted LEDs with light-emitting reconfigurable intelligent surfaces (LeRISs). By leveraging the spatial diversity offered by the LeRIS architecture, the framework introduces robust signal paths that improve localization accuracy and reduce errors under varying orientations. To this end, we derive a system of equations for received signal strength-based localization that accounts for random receiver orientations and imposes spatial constraints on LED placement, ensuring unique and reliable solutions. Finally, our simulation results demonstrate that the proposed framework achieves precise beam control and high spectral efficiency even for RISs with large number of reflecting elements by tightly coupling the localization process with the beamforming configuration, allowing accurate direction estimation and robust PWE operation.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 8057-8069
Evaluating the Impact of Jitter on Collaborative High-Speed Aerial and Railway Networks
With the rapid growth of high-speed rail (HSR) networks, reliable communication is increasingly challenging due to complex terrain and coverage gaps in remote areas. Uncrewed aerial vehicles (UAVs), with their mobility and flexibility, provide aerial relay support to bridge these gaps, enhance signal strength, and improve HSR communication reliability. However, their performance in millimeter-wave (mmWave) systems is significantly degraded by mechanical jitter caused by environmental factors such as wind and turbulence, which adversely affects beam alignment and overall communication quality. To address these challenges, this work introduces a comprehensive analytical framework. We first develop a statistical model that characterizes the relationship between beam gain and jitter intensity. Subsequently, closed-form expressions are derived for the outage probability and ergodic data rate of UAV-assisted HSR mmWave systems under jitter influence, taking into account both co-located (CA) and distributed antenna (DA) configurations. Furthermore, we propose an adaptive beamwidth design that maximizes the average ergodic rate by adjusting the beamwidth according to UAV jitter severity. Numerical simulations verify that this approach significantly improves system capacity and robustness compared with conventional static beamforming, confirming its effectiveness.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (7) , 8057-8069
Evaluating the Impact of Jitter on Collaborative High-Speed Aerial and Railway Networks
With the rapid growth of high-speed rail (HSR) networks, reliable communication is increasingly challenging due to complex terrain and coverage gaps in remote areas. Uncrewed aerial vehicles (UAVs), with their mobility and flexibility, provide aerial relay support to bridge these gaps, enhance signal strength, and improve HSR communication reliability. However, their performance in millimeter-wave (mmWave) systems is significantly degraded by mechanical jitter caused by environmental factors such as wind and turbulence, which adversely affects beam alignment and overall communication quality. To address these challenges, this work introduces a comprehensive analytical framework. We first develop a statistical model that characterizes the relationship between beam gain and jitter intensity. Subsequently, closed-form expressions are derived for the outage probability and ergodic data rate of UAV-assisted HSR mmWave systems under jitter influence, taking into account both co-located (CA) and distributed antenna (DA) configurations. Furthermore, we propose an adaptive beamwidth design that maximizes the average ergodic rate by adjusting the beamwidth according to UAV jitter severity. Numerical simulations verify that this approach significantly improves system capacity and robustness compared with conventional static beamforming, confirming its effectiveness.
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
Fluid Aerial Networks: UAV Rotation for Inter-Cell Interference Mitigation
With the rapid development of aerial infrastructure, unmanned aerial vehicles (UAVs) that function as aerial base stations (ABSs) extend terrestrial network services into the sky, enabling on-demand connectivity and enhancing emergency communication capabilities in cellular networks by leveraging the flexibility and mobility of UAVs. In such a UAV-assisted network, this paper investigates position-based beamforming between ABSs and ground users (GUs). To mitigate inter-cell interference, we propose a novel fluid aerial network that leverages ABS rotation to increase multi-cell capacity and overall network efficiency. Specifically, in the line-of-sight channel model, the spatial beamforming weights are determined by the positions of GUs. In this direction, we examine the beamforming gain of a two-dimensional multiple-input multiple-output (MIMO) array at various ground positions, revealing that ABS rotation significantly affects multi-user channel correlation and inter-cell interference. Based on these findings, we propose an alternative low-complexity algorithm to design the optimal rotation angle for ABSs, aiming to reduce inter-cell interference and thus maximize the sum rate of multi-cell systems. In simulations, exhaustive search serves as a benchmark to validate the optimization performance of the proposed sequential ABS rotation scheme. Moreover, simulation results demonstrate that, in interference-limited regions, the proposed ABS rotation paradigm can significantly reduce inter-cell interference in terrestrial networks and improve the multi-cell sum rate by approximately 10% compared to fixed-direction ABSs without rotation.
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. PP (00189545) , 1-14
Fluid Aerial Networks: UAV Rotation for Inter-Cell Interference Mitigation
With the rapid development of aerial infrastructure, unmanned aerial vehicles (UAVs) that function as aerial base stations (ABSs) extend terrestrial network services into the sky, enabling on-demand connectivity and enhancing emergency communication capabilities in cellular networks by leveraging the flexibility and mobility of UAVs. In such a UAV-assisted network, this paper investigates position-based beamforming between ABSs and ground users (GUs). To mitigate inter-cell interference, we propose a novel fluid aerial network that leverages ABS rotation to increase multi-cell capacity and overall network efficiency. Specifically, in the line-of-sight channel model, the spatial beamforming weights are determined by the positions of GUs. In this direction, we examine the beamforming gain of a two-dimensional multiple-input multiple-output (MIMO) array at various ground positions, revealing that ABS rotation significantly affects multi-user channel correlation and inter-cell interference. Based on these findings, we propose an alternative low-complexity algorithm to design the optimal rotation angle for ABSs, aiming to reduce inter-cell interference and thus maximize the sum rate of multi-cell systems. In simulations, exhaustive search serves as a benchmark to validate the optimization performance of the proposed sequential ABS rotation scheme. Moreover, simulation results demonstrate that, in interference-limited regions, the proposed ABS rotation paradigm can significantly reduce inter-cell interference in terrestrial networks and improve the multi-cell sum rate by approximately 10% compared to fixed-direction ABSs without rotation.
- 27 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1523-1527
Viterbi State Selection for Discrete Pinching Antenna Systems
Pinching antennas enable dynamic control of electromagnetic wave propagation through reconfigurable radiating structures, but selecting an optimal subset of antennas remains a combinatorial problem with exponential complexity. This letter considers antenna subset selection for a waveguide-fed pinching antenna array serving ground users under a time-division access scheme. The achievable rate depends on the coherent superposition of the effective complex channel gains and is therefore highly sensitive to the relative phase alignment of the activated antennas. To address the prohibitive complexity of exhaustive search, we propose a Viterbi state selection (VSS) algorithm that exploits the phase structure of the combined received signal. The trellis state is defined by a quantized representation of the phase of the accumulated complex gain, and a Viterbi-based survivor rule is used to prune dominated antenna subsets across stages. Numerical results demonstrate that the proposed method achieves the same antenna selection and rate as exhaustive search, while reducing the computational complexity from exponential to polynomial in the number of available antennas.
- 27 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1523-1527
Viterbi State Selection for Discrete Pinching Antenna Systems
Pinching antennas enable dynamic control of electromagnetic wave propagation through reconfigurable radiating structures, but selecting an optimal subset of antennas remains a combinatorial problem with exponential complexity. This letter considers antenna subset selection for a waveguide-fed pinching antenna array serving ground users under a time-division access scheme. The achievable rate depends on the coherent superposition of the effective complex channel gains and is therefore highly sensitive to the relative phase alignment of the activated antennas. To address the prohibitive complexity of exhaustive search, we propose a Viterbi state selection (VSS) algorithm that exploits the phase structure of the combined received signal. The trellis state is defined by a quantized representation of the phase of the accumulated complex gain, and a Viterbi-based survivor rule is used to prune dominated antenna subsets across stages. Numerical results demonstrate that the proposed method achieves the same antenna selection and rate as exhaustive search, while reducing the computational complexity from exponential to polynomial in the number of available antennas.
- 26 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (10) , 21994-22006
How Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically, only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed, and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency (PDE) to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
- 26 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (10) , 21994-22006
How Many Pinching Antennas Are Enough?
Programmable wireless environments (PWEs) have emerged as a key paradigm for next-generation communication networks, aiming to transform wireless propagation from an uncontrollable phenomenon into a reconfigurable process that can adapt to diverse service requirements. In this framework, pinching-antenna systems (PASs) have recently been proposed as a promising enabling technology, as they allow the radiation location and effective propagation distance to be adjusted by selectively exciting radiating points along a dielectric waveguide. However, most existing studies on PASs rely on the idealized assumption that pinching-antenna (PA) positions can be continuously adjusted along the waveguide, while realistically, only a finite set of pinching locations is available. Motivated by this, this paper analyzes the performance of two-state PASs, where the PA positions are fixed, and only their activation state can be controlled. By explicitly accounting for the spatial discreteness of the available pinching points, closed-form analytical expressions for the outage probability and the ergodic achievable data rate are derived. In addition, we introduce the pinching discretization efficiency (PDE) to quantify the performance gap between discrete and continuous pinching configurations, enabling a direct assessment of the number of PAs required to approximate the ideal continuous case. Finally, numerical results validate the analytical framework and show that near-continuous performance can be achieved with a limited number of PAs, offering useful insights for the design and deployment of PASs in PWEs.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1200-1204
On the Ergodic Rate of Reconfigurable Optical Wireless Communication Systems
In this work, we investigate an optical wireless communication network, consisting of a transmitter with multiple elements and a randomly deployed user. For this network, we derive a novel closed-form expression for the lower bound of the ergodic rate (ER) for three unique scenarios. These scenarios include a static system, where the orientation of both components is fixed, a partially reconfigurable system, where either the transmitter or the receiver orientation can be optimized, and finally a fully reconfigurable system, where both orientations can be optimized. The simulation results demonstrate the impact of various simulation parameters on the performance of the system and prove that the derived ER using the lower-bound is a great approximation of the actual ER.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 1200-1204
On the Ergodic Rate of Reconfigurable Optical Wireless Communication Systems
In this work, we investigate an optical wireless communication network, consisting of a transmitter with multiple elements and a randomly deployed user. For this network, we derive a novel closed-form expression for the lower bound of the ergodic rate (ER) for three unique scenarios. These scenarios include a static system, where the orientation of both components is fixed, a partially reconfigurable system, where either the transmitter or the receiver orientation can be optimized, and finally a fully reconfigurable system, where both orientations can be optimized. The simulation results demonstrate the impact of various simulation parameters on the performance of the system and prove that the derived ER using the lower-bound is a great approximation of the actual ER.
- Open Access
Constellation Design for Robust Interference Mitigation
This paper investigates symbol detection for single-carrier communication systems operating in the presence of additive interference with Nakagami-m statistics. Such interference departs from the assumptions underlying conventional detection methods based on Gaussian noise models and leads to detection mismatch that fundamentally affects symbol-level performance. In particular, the presence of random interference amplitude and non-uniform phase alters the structure of the optimal decision regions and renders standard Euclidean distance-based detectors suboptimal. To address this challenge, we develop the maximum-likelihood Gaussian-phase approximate (ML-G) detector, a low-complexity detection rule that accurately approximates maximum-likelihood detection while remaining suitable for practical implementation. The proposed detector explicitly incorporates the statistical properties of the interference and induces decision regions that differ significantly from those arising under conventional metrics. Building on the ML-G framework, we further investigate constellation design under interference-aware detection and formulate an optimization problem that seeks symbol placements that minimize the symbol error probability subject to an average energy constraint. The resulting constellations are obtained numerically and adapt to the interference environment, exhibiting non-standard and asymmetric structures as interference strength increases. Simulation results demonstrate clear symbol error probability gains over established benchmark schemes across a range of interference conditions, particularly in scenarios with dominant additive interference.
Open AccessConstellation Design for Robust Interference Mitigation
This paper investigates symbol detection for single-carrier communication systems operating in the presence of additive interference with Nakagami-m statistics. Such interference departs from the assumptions underlying conventional detection methods based on Gaussian noise models and leads to detection mismatch that fundamentally affects symbol-level performance. In particular, the presence of random interference amplitude and non-uniform phase alters the structure of the optimal decision regions and renders standard Euclidean distance-based detectors suboptimal. To address this challenge, we develop the maximum-likelihood Gaussian-phase approximate (ML-G) detector, a low-complexity detection rule that accurately approximates maximum-likelihood detection while remaining suitable for practical implementation. The proposed detector explicitly incorporates the statistical properties of the interference and induces decision regions that differ significantly from those arising under conventional metrics. Building on the ML-G framework, we further investigate constellation design under interference-aware detection and formulate an optimization problem that seeks symbol placements that minimize the symbol error probability subject to an average energy constraint. The resulting constellations are obtained numerically and adapt to the interference environment, exhibiting non-standard and asymmetric structures as interference strength increases. Simulation results demonstrate clear symbol error probability gains over established benchmark schemes across a range of interference conditions, particularly in scenarios with dominant additive interference.
- Open Access
Improving Reliability of Hybrid Bit-Semantic Communications for Cellular Networks
Semantic communications (SemComs) have been considered as a promising solution to reduce the amount of transmitted information, thus paving the way for more energy-and spectrum-efficient wireless networks. Nevertheless, SemComs rely heavily on the utilization of deep neural networks (DNNs) at the transceivers, which limit the accuracy between the original and reconstructed data and are challenging to implement in practice due to increased architecture complexity. Thus, hybrid cellular networks that utilize both conventional bit communications (BitComs) and SemComs have been introduced to bridge the gap between required and existing infrastructure. To facilitate such networks, in this work, we investigate reliability by deriving closed-form expressions for the outage probability of the network. Additionally, we propose a generalized outage probability through which the cell radius that achieves a desired outage threshold for a specific range of users is calculated in closed form. Additionally, to consider the practical limitations caused by the specialized dedicated hardware and the increased memory and computational resources that are required to support SemCom, a semantic utilization metric is proposed. Based on this metric, we express the probability that a specific number of users select SemCom transmission and calculate the optimal cell radius for that number in closed form. Simulation results validate the derived analytical expressions and the characterized design properties of the cell radius found through the proposed metrics, providing useful insights.
Open AccessImproving Reliability of Hybrid Bit-Semantic Communications for Cellular Networks
Semantic communications (SemComs) have been considered as a promising solution to reduce the amount of transmitted information, thus paving the way for more energy-and spectrum-efficient wireless networks. Nevertheless, SemComs rely heavily on the utilization of deep neural networks (DNNs) at the transceivers, which limit the accuracy between the original and reconstructed data and are challenging to implement in practice due to increased architecture complexity. Thus, hybrid cellular networks that utilize both conventional bit communications (BitComs) and SemComs have been introduced to bridge the gap between required and existing infrastructure. To facilitate such networks, in this work, we investigate reliability by deriving closed-form expressions for the outage probability of the network. Additionally, we propose a generalized outage probability through which the cell radius that achieves a desired outage threshold for a specific range of users is calculated in closed form. Additionally, to consider the practical limitations caused by the specialized dedicated hardware and the increased memory and computational resources that are required to support SemCom, a semantic utilization metric is proposed. Based on this metric, we express the probability that a specific number of users select SemCom transmission and calculate the optimal cell radius for that number in closed form. Simulation results validate the derived analytical expressions and the characterized design properties of the cell radius found through the proposed metrics, providing useful insights.