ZWZhiheng Wang

Zhiheng Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhiheng Wang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modal and nonmodal stability analysis and subcritical transition in two-dimensional curved channel flow

    by Zhiheng Wang, Xintong Zhao, Zhu Huang, Feiyan Zhang, Guang Xi

    This study investigates the hydrodynamic stability of two-dimensional curved channel flows. Using spectral/hp element method, time-stepper eigenvalue algorithm, and direct numerical simulation, modal and non-modal stability analyses are performed for wall curvature radii ranging from R = 20 to R = 200 over Re = 500–5816. Curvature exerts a pronounced destabilizing effect, significantly reducing the critical Reynolds number. The strong curvature (R = 20) substantially enhances transient growth, yielding a maximum energy amplification far exceeding those of weak-curvature cases and plane Poiseuille flow (PPF). The dependence of global maximum energy growth Gmax on the Reynolds number Re is established for various curvature configurations. The results for the minimal-curvature of R = 200 asymptotically approach those of the PPF, demonstrating the continuity of the physical model. Furthermore, the linear optimal disturbances tilted against the mean shear in curved channels resemble those in the PPF. However, with strong curvatures, the optimal disturbances undergo severe distortion and exhibit asymmetric characteristics. The primary mechanism by which curvature promotes transient growth lies in the generation of localized high-shear regions near the upper and lower walls, thereby providing a more favorable environment for the perturbations to extract energy from the mean shear. Finally, using the linear optimal perturbations as initial conditions, subcritical transitions to turbulence are successfully triggered in the cases of R = 200, R = 100, and the PPF. Notably, the threshold Reynolds numbers for triggering subcritical transition in the curved cases are lower than the value for the PPF.

  • Disturbance growth analysis of pressure gradient transition flow with three-dimensional rough surfaces

    by Weihao Ling, Stefania Cherubini, Zhiheng Wang, Wenlin Huang, Guang Xi

    This study employs direct numerical simulations to examine the laminar-to-turbulent transition over a flat plate subjected to a favourable–adverse pressure gradient, incorporating isotropic/anisotropic and negatively skewed rough surfaces. The rough surfaces are positioned upstream of the separation point. By leveraging global stability analysis, inlet/local transient growth analysis and resolvent analysis, the combined effects of rough surface and adverse pressure gradients on disturbance growth mechanisms during transition are elucidated. The findings indicate that isotropic rough surfaces are most likely to trigger global instability, while streamwise modulation demonstrates the strongest inertia in this regard. Convective-type modes dominate near the outlet. As the system approaches the instability threshold, a critical mode emerges in the three-dimensional shear layer downstream of the roughness, characterised by a streamwise velocity peak reminiscent of a laminar separation bubble, with disturbance kinetic energy governed primarily by streamwise shear. The isotropy of the rough surface significantly amplifies linear instability of local travelling waves, transforming the downstream region into both a low-pass filter and an amplifier of high-wavenumber disturbances. Optimal disturbances of local travelling waves in the far downstream exhibit a structure analogous to oblique waves. When harmonic nonlinear forcing is introduced, streamwise modulation emerges as the geometry yielding maximum energy gain. The optimal forcing generated is highly localised in wave packets near the downstream region. Excluding the influence of optimal forcing on the harmonic forcings disrupts the coherence of roughness-induced coherent structures, impeding nonlinear interactions in the downstream region and the overall transition process.

  • Open Access

    RANS Structural Uncertainty Quantification of Transonic Centrifugal Compressors Aerodynamics Using Eigenvalue Perturbation

    by Mingyi Wang, Zhenfei Wang, Zhu Huang, Zhiheng Wang, Guang Xi

    Faced with the challenges in aerodynamic performance prediction of transonic centrifugal compressors caused by RANS turbulence model structural uncertainty, this study focuses on the aerodynamic uncertainty quantification of centrifugal compressors based on the eigenspace perturbation framework and conducts a comparative analysis of uniform and non-uniform eigenvalue perturbation strategies. Taking the classic Krain centrifugal impeller as the research object, the influence of RANS turbulence model structural uncertainty is quantified via controlled perturbations. The results show non-uniform perturbation is significantly superior to uniform perturbation in prediction accuracy and operating condition adaptability, with its predicted pressure ratio and efficiency uncertainty intervals basically covering experimental data over the entire flow range and the maximum efficiency deviation within 2.5%. Under non-uniform perturbation, the 1C mode predicts an average 4.5% increase in total pressure ratio and a 24.9% entropy reduction in the tip region, reflecting lower flow losses and enhanced work capacity. In contrast, the 2Cmin mode predicts an average 2.8% decrease in total pressure ratio and a 2.4% higher entropy than the baseline, indicating higher expected flow losses and more conservative performance predictions. Flow field analysis reveals perturbations modulate local turbulent structures, notably affecting tip leakage flow and downstream regions, thus altering secondary flow development and flow loss spatial distribution patterns. Results of other perturbation modes fall between these two extremes, collectively forming an aerodynamic uncertainty envelope.

  • Influences of the effective slope of rough surface on the quasi-streamwise vortex and Reynolds shear stress under favorable-adverse pressure gradient

    by Weihao Ling, Zhiheng Wang, Wenlin Huang, Guang Xi

    In this research, direct numerical simulations were performed on the transitional flow over a flat plate subject to a pressure gradient and equipped with a three-dimensional irregular rough surface. The roughness configurations were developed based on varying ratios of spanwise to streamwise effective slopes (ESz/ESx), and were positioned upstream as well as in the proximity of the separation point induced by the adverse pressure gradient. The investigation primarily centered on the influence of the adverse pressure gradient and the rough surface's effective slope on the downstream quasi-streamwise vortices and the sweep and ejection events within the lift-up mechanism. Findings indicate that a rough surface aligned with the streamwise direction fosters more pronounced and intact hairpin vortices and promotes the development of spanwise secondary flows. When located near the separation point, the adverse pressure gradient emerges as a predominant factor shaping the downstream vortex structure, leading to vortex cores mixing and an increase in wall-normal vortices within the reverse flow region. The distribution of sweep and ejection events downstream of the roughness is largely consistent, whereas spanwise-aligned rough surface significantly mitigates these events. In the intense regions of these events, ejection events surpass sweep events in strength, while maintaining streamwise continuity. For the energy-rich segments of the most active coherent structures in the low-frequency band, the ejection event is markedly attenuated along the streamwise direction under the adverse pressure gradient, with its continuity disrupted, whereas the sweep event remains largely unaffected, with the evolutionary degrees of both events being similar.


  • Laminar–turbulent transition with pressure gradient: influences of effective slope and skewness of rough surface

    by Weihao Ling, Zhiheng Wang, Wenlin Huang, Song Gao, Guang Xi

    Direct numerical simulations are conducted to investigate the transition flow over a flat plate featuring pressure gradients and a three-dimensional rough surface. The rough surface is categorised into nine types based on the effective slope ratio ${E{{S}_{z}}}/{E{{S}_{x}}}$ ( $ES_{z}$ : spanwise effective slope, $ES_{x}$ : streamwise effective slope) and skewness $Sk$ , with the embedded boundary method employed for resolving the solid wall. Findings indicate that the influence of ${E{{S}_{z}}}/{E{{S}_{x}}}$ on the streamwise vortex pair counters the effects on the wall-normal shear and the two-dimensional spanwise vortex sheet. Negative skewness alone can stimulate all three components of the hairpin vortex simultaneously. The new formula for predicting the sheltering angle, which incorporates the up-ejecting segment, demonstrates enhanced accuracy in predicting the sheltering area across the entire rough surface, outperforming the previous formulation. The forward displacement relative to the drag peak of the pressure stagnation point along the streamwise direction remains unaffected by the spanwise effective slope and the skewness. In the upper transition region, negative skewness significantly intensifies both the production and dissipation terms of the fluctuating kinetic energy, which correlate with the inviscid instability of the separation flow and the viscous instability induced by the lift-up mechanism. During the early phase of transition, negative skewness is capable of producing linear modes that match the intensity of nonlinear coherent structures at intermediate to high frequencies, exhibiting quasi-orthogonality. During the late transition phase, zero skewness can give rise to linear modes featuring robust quasi-orthogonality at low frequencies.


  • Coupling effect of streamwise-adjacent roughness elements and inlet free-stream turbulence on the flat-plate transition

    by Weihao Ling, Zhiheng Wang, Yang Zhang, Wenlin Huang, Guang Xi

    To elucidate the influences of varying shapes of adjacent roughness elements and inlet free-stream turbulence (FST) on the transition within a flat boundary layer, particularly the alterations in coherent and energetic structures, linear modes, and their energy-containing components, a direct numerical simulation was conducted on a flat-plate boundary layer with streamwise-adjacent roughness elements and subjected to inlet FST. We designed two distinct front roughness element configurations and four levels of inlet FST. Findings indicate that at higher FST levels, the energy conversion from mean flow to fluctuating flow, prompted by the roughness elements, is suppressed; however, configurations with strong disturbances can counteract the effect of delaying transition through the formation of tight quasi-streamwise vortices. With increasing FST levels, energetic structures within cylinder configuration are transported further downstream, whereas in ramp configuration, energetic wave packets with an extensive streamwise range are produced. At the characteristic low frequency ω=0.32, weak FST with intensity akin to noise elicits a resonator-like mode distribution, which aids in the development of coherent structures yet cannot be used to approximate the same frequency waves within nonlinear systems. At the characteristic high frequency ω=2.3, in light of the inlet FST, the role of linear modes in the nonlinear evolution of the system can be substantially augmented. For the energy-containing segment of linear modes characterized by low-rank dynamics, there is no direct association with the high-frequency modes featuring quasi-orthogonality, and their low-rank attributes do not significantly contribute to the nonlinear progression of the system.


  • Replacing stator–outlet guide vanes with tandem stator for rear stage of axial compressor

    by Rui Zhu, Yaping Ju, Xiawen Zhang, Zhen Li, Zhiheng Wang, Chuhua Zhang

    The confirmed benefits of tandem blades, i.e., low flow loss coefficient and wide working range at large flow turning angle, make them more competitive than conventional blades when applied in the rear stator of a multistage axial compressor. However, all the tandem blades reported in the open literature are redesigned from single blades, while no efforts have been so far devoted to the replacement of double blades, i.e., stator–outlet guide vanes (OGV), with tandem ones. Moreover, the existing single-to-tandem (S2T) blade design methods cannot be extended to double-to-tandem (D2T) design due to unequal blade numbers between stator and OGV in the compressor rear stage. It is still an open question that how much the performance improvement margin of tandem blades is as compared with double blades. In view of this, a D2T blade design method is first proposed in this study in order to support the replacement of stator–OGV with tandem blades. For the examined rear stage of a heavy-duty gas turbine compressor, the redesigned tandem-bladed stator by using the proposed method can enhance the stage adiabatic efficiency by 0.6%–1.30% at typical operating points, in comparison with the original stator–OGV. The solidity of tandem blades is the most critical to compressor performance and D2T design recommendations of solidity are summarized. Then, particular attention is paid to clarifying the flow mechanisms behind aerodynamic performance improvements of tandem blades. The present work is beneficial for the development of advanced design methods of tandem blades for the rear stage of compressors.