HZHua Zheng

Hua Zheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hua Zheng has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Adaptive TVR-Based Phase Refinement for φ -OFDR Distributed Acoustic Sensing

    by Hua Zheng, Junda Li, Junzhe Yu, Pengbai Xu, Kunhua Wen, Jun Yang, Yuncai Wang, Yuwen Qin

  • Extending the Measurement Range of CP-φOTDR With Two-Step Cross Correlation Algorithm

    by Jiangjiang Lin, Junjie Zhu, Pengbai Xu, Hua Zheng, Kunhua Wen, Xinyong Dong, Songnian Fu, Jun Yang, Yuwen Qin

    Acoustic wave amplitude variations often exceed the measurement range of chirped pulse phase-sensitive optical time-domain reflectometry (CP-φOTDR), resulting in outliers in demodulated waveforms. As the measurand increases, the cross-correlation spectrum of CP-φOTDR degrades into a noise-like pattern. When the main peak amplitude falls below that of spurious peaks induced by correlation degradation, conventional cross-correlation methods fail to search the true peak. This paper proposes a two-step cross-correlation (TCC) algorithm that employs an intermediate reference trace to bridge two adjacent Rayleigh backscattering (RBS) traces. By performing cross-correlation operations sequentially, the algorithm accurately identifies the true peak in the degraded spectrum, thereby eliminating outliers caused by spurious peaks and extending the demodulation range of CP-φOTDR. Theoretical simulations and experimental results validate that the extended demodulation range is strongly dependent on the RBS signal-to-noise ratio, with a twofold improvement verified under sufficiently high SNR. The proposed approach thus offers a practical route to enhance the measurement range performance of CP‑φOTDR, showing highly potential for applications in ocean observation, seismic monitoring, oil-gas exploration, and other fields requiring large dynamic range sensing.

  • Tuning Rate Estimation for Improving Positioning Accuracy in OFDR System

    by Zheng Fang, Hua Zheng, Huan Wu, Changyuan Yu, Chao Lu

    A necessary tuning rate estimation method to correct the positioning error caused by nonlinear effects in optical frequency domain reflectometry (OFDR) systems is proposed. Unlike previous studies on nonlinear effects in OFDR systems, this paper focuses on the adverse effects of nonlinear tuning on positioning accuracy, rather than on the spatial resolution of the system. Based on the nonlinear noise model of the tunable laser source, the mechanism of its effect on the positioning capability is discussed in this paper, and the specific effects of each parameter in the noise model on the positioning accuracy are further investigated. In the proposed method, the common auxiliary reference signal is employed to estimate the phase information, and the correction of OFDR system positioning is achieved using the short-time Fourier transform (STFT) and the sine-fit algorithm. In this paper, the effect of different kinds of nonlinear noise on the positioning capability of the system is discussed, and the possibility of using the proposed method to eliminate the positioning error is verified. Compare the positioning capacity before and after correction, we can achieve a positioning accuracy enhancement of about 2.36% on a 310 m fiber under test.


  • Fast and Storage-Optimized Compressed Domain Vibration Detection and Classification for Distributed Acoustic Sensing

    by Xingliang Shen, Huan Wu, Kun Zhu, Huanhuan Liu, Yujia Li, Hua Zheng, Jialong Li, Liyang Shao, Perry Ping Shum, Chao Lu

    Distributed acoustic sensing (DAS) is an attractive technology that can turn existing fibre optic networks to real-time distributed vibration sensors. However, it encounters great challenges in handling the transmission, storage, and processing of voluminous data streams which are orders of magnitude larger than that collected from point sensors. The gap between intensive data generated by φ-OTDR and modern computing system with limited reading/writing speed and storage capacity leads to restrictions on many applications. Compressive sensing (CS) is a revolutionary signal acquisition method that allows a signal to be acquired and reconstructed with significantly fewer samples than that required by Nyquist-Shannon theorem. The data size is greatly reduced in the sampling stage, but the reconstruction of the compressed data is still time and computation consuming. To address this challenge, we propose to map the feature extractor from Nyquist-domain to compressed-domain and therefore vibration detection and classification can be directly implemented in compressed-domain. The measured results show that our method can be used to reduce the transmitted data size by 70% while achieves a true positive rate (TPR) of 99.4% and a false positive rate (FPR) of 0.04% of positioning along 5-km-long sensing fibre and a classification accuracy of 95.05% on a 5-class classification task.


  • Enhanced Quasi-Distributed Accelerometer Array Based on φ-OTDR and Ultraweak Fiber Bragg Grating

    by Hua Zheng, Huan Wu, Chern Yang Leong, Yuyao Wang, Xinliang Shen, Zheng Fang, Xin Cheng, Jingxian Cui, Dingjiong Ma, Yun Miao, et al.

    We propose and experimentally demonstrate an enhanced quasi-distributed accelerometer array based on φ-OTDR and ultra-weak fiber Bragg grating (UWFBG). By utilizing a transducer cylinder, the vibration can be easily converted to an axial strain of the sensing fiber, which enables a high sensitivity in vibration measurement. Furthermore, an UWFBG array that contains backscattering enhanced points along the fiber is employed to improve the signal-to-noise ratio (SNR). Consequently, quasi-distributed vibration sensing with a resolution of 0.03 g, and a flat sensitivity of 1.4 rad/g in a frequency range from 50 to 800 Hz is realized over 500-m long UWFBG. The proposed sensing system offers high sensing sensitivity, large multiplexing capacity, and anti-interference fading, which can be applied for structural health monitoring of large buildings and machinery.


  • Dynamic BOTDA Based on Spectrally Efficient Frequency-Division Multiplexing

    by Yaxi Yan, Yu Wang, Hua Zheng, Daru Chen, Alan Pak Tao Lau, Changjian Guo, Chao Lu

    The tradeoff between the spatial resolution and estimation accuracy of the Brillouin frequency shift (BFS) sets a technical hurdle for Brillouin optical time-domain analyzers (BOTDAs) based on orthogonal frequency division multiplexing (OFDM), due to orthogonality between the OFDM subcarriers. To solve this problem, a novel BOTDA using spectrally efficient frequency-division multiplexing (SEFDM) is proposed. A partial Zadoff-Chu sequence that generates a centralized pulse after inverse discrete Fourier transform (IDFT) is used. SEFDM signaling is done by discarding the sidelobe of the time domain pulse before being sent as the probe wave. As such, the symbol period is dramatically reduced compared with OFDM signals, leading to a much higher spatial resolution. Meanwhile, the subcarrier spacing of the SEFDM signals remains the same as that of the OFDM signals, which ensures a high estimation accuracy of the BFS if a small subcarrier spacing is used. We experimentally demonstrate a 3.1 m spatial resolution with a 1.294 MHz measurement accuracy in a SEFDM based BOTDA over a 10 km sensing range. Moreover, by using SEFDM signals with very short symbol periods as the probe wave, the time-consuming frequency sweeping process is eliminated, which makes dynamic sensing possible. We successfully demonstrate a dynamic measurement with a vibration frequency of 26 Hz. The introduction of SEFDM provides the desirable flexibility for BOTDAs to be used in both static and dynamic distributed fiber sensing areas with a large dynamic range.


  • Deep Learning Enhanced Long-Range Fast BOTDA for Vibration Measurement

    by Hua Zheng, Yaxi Yan, Yuyao Wang, Xingliang Shen, Chao Lu

    In this paper, we propose and experimentally demonstrate a scheme of deep learning enhanced long-range fast Brillouin optical time-domain analysis (BOTDA). The volumetric data from fast BOTDA is denoised and demodulated by using a deep video denoising network and a deep neural network, respectively. Benefitting from the advanced deep learning algorithms, the sensing range of fast BOTDA is extended to 10 km successfully. In experiment, vibration signal is measured with a sampling rate of 23 Hz, 2 m spatial resolution, and 1.19 MHz accuracy over 10 km single-mode fiber with only 4 averages. Due to the low computational complexity and GPU acceleration, the network takes less than 0.04 s to process 100 × 21800 data, which is much faster than the conventional algorithms. This method provides the potential for real-time vibration measurement in fast BOTDA with long sensing range.


  • Accelerated Fast BOTDA Assisted by Compressed Sensing and Image Denoising

    by Hua Zheng, Yaxi Yan, Zhiyong Zhao, Tao Zhu, Jingdong Zhang, Nan Guo, Chao Lu

    We propose and experimentally demonstrate a scheme for accelerated fast BOTDA. The effect of signal-to-noise ratio (SNR) on recovery performance of compressed sensing is simulated and analyzed, it is found that a reduction in SNR requires much larger frequency data to recover the original Brillouin gain spectrum (BGS). To enable a high recovery probability, Block-Matching and 3D filtering (BM3D) algorithm is employed to enhance the SNR of Brillouin time trace and reduce the number of averages. Combining with a principal component analysis (PCA) based compressed sensing technique, the Brillouin gain spectrum (BGS) can be successfully reconstructed from only 37.5% frequency data. In the experiment, 75 randomly selected frequency data is acquired to reconstruct the BGS. Distributed strain sensing is achieved over 15 km single-mode fiber with 3 m spatial resolution and 0.52 MHz Brillouin frequency shift (BFS) uncertainty. Due to the accelerated process, the measurement time with 40 averages is less than 0.5 s.


  • Open Access

    Unidirectional Ultra-Long Distributed Optical Fiber Sensor

    by Yaxi Yan, Hua Zheng, Alan Pak Tau Lau, Changjian Guo, Chao Lu

    In this paper, we propose and experimentally demonstrate an ultra-long distributed fiber vibration sensing system using unidirectional forward transmission of a continuous-wave signal and coherent detection with digital signal processing. Two optical fibers, which are close to each other, are deployed for sensing. A loop-back configuration is formed by splicing these two optical fibers at the far end of these two fibers. The location of the vibration event is identified by analyzing the null points in the frequency spectrum of the extracted phase signal. Thanks to the nature of unidirectional forward transmission, the Rayleigh backscattering noise can be avoided. Meanwhile, forward transmission enables optical amplifiers to compensate for the signal loss and hence fundamentally overcome the sensing range limit. We successfully demonstrate the localization of single point and multi-point vibrations with measurement errors of less than ±100 m and ±200 m, respectively, over a 500-km sensing range. The proposed scheme opens new possibilities in ultra-long haul distributed optical sensing applications.