YCYulong Che

Yulong Che

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yulong Che has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A probabilistic assessment method for voltage violation risk in distribution networks with distributed photovoltaic generation based on an improved three-point estimation method

    by Yulong Che, Xumeng Zhang, Dengfeng Wang, Run Han, Zhiliang Ye

    With the increasing penetration of distributed photovoltaic (PV) generation, PV output shows stronger stochastic fluctuations and correlations. These characteristics increase the difficulty of voltage risk assessment in distribution networks. This paper proposes a probabilistic assessment method for voltage violation risk in distribution networks with distributed PV integration. The method is based on an improved three-point estimation method (I3PEM). First, an adaptive kernel density estimation (AKDE) model is developed using measured PV power data. Its fitting performance is compared with that of the normal and Beta distributions. The Spearman rank correlation coefficient is used to characterize correlations among PV outputs at multiple access points. Then, the AC power flow equations are linearized. An I3PEM-based probabilistic power flow (PPF) framework is constructed. Its accuracy and computation time are compared with those of the total probability formula (TPF), the three-point estimation method (3PEM), and Monte Carlo simulation (MCS). Next, voltage risk indices are established. These indices integrate voltage violation probability, violation severity, and system-wide comprehensive risk. Simulations are conducted on the IEEE 33-bus system. The results show that AKDE provides a better fit for PV output than the normal and Beta distributions. I3PEM produces lower errors than 3PEM for voltage magnitude, voltage angle, and active power flow. It is also significantly faster than MCS and TPF. Under the undervoltage-dominated operating conditions considered in the studied IEEE 33-bus system, higher PV capacity raises nodal voltage levels and reduces voltage violation risk within the investigated capacity range. Stronger PV output correlation increases system-wide comprehensive risk because synchronized fluctuations are amplified. The proposed method provides an effective tool for fast PPF analysis and voltage risk assessment in distribution networks with distributed PV integration.

  • Weighted Multi-Criteria Capacity Optimization of Hybrid Energy Storage for Smoothing Traction Load Fluctuations in High-Speed Railways Based on Adaptive Frequency-Domain Decomposition

    by Yulong Che, Xia Jin, Yunchuan Deng, Xiaoru Wang, Enjie He, Xiaoqin Lv

    As high-speed railway (HSR) networks expand and train density increases, traction substations (TSSs) face short-duration, high-intensity power pulses and concentrated regenerative-braking power, which increase grid-capacity pressure and limit regenerative-braking energy (RBE) utilization. Because lithium-ion batteries (LIBs) are poorly suited to sustained high-frequency, high-rate impacts, this study proposes a weighted multi-criteria capacity-optimization framework for a fully active LIB-supercapacitor (SC) hybrid energy storage system (HESS) based on adaptive frequency-domain decomposition. First, the HESS is integrated into the TSS through the common DC link of a railway power conditioner (RPC). Positive traction power exceeding a prescribed peak-shaving threshold and all negative bus-side regenerative-braking power are extracted to form the HESS regulation sequence. Second, a first-order low-pass filter assigns the low-frequency component to the LIB and the complementary high-frequency component to the SC. Both branches’ rated energy and power and the filter cutoff frequency are jointly optimized. The time-series dispatch enforces rated-power, energy, state-of-charge (SOC), terminal-SOC, and 3C design-screening constraints, together with idle-state filter reset and residual-command reallocation. Finally, a normalized weighted optimization model combining initial capital cost, maximum grid-side demand, and unabsorbed bus-side RBE is formulated and solved using an improved sparrow search algorithm (ISSA). The three objectives are non-exhaustive. Based on one anonymized 7 h aggregate TSS power record sampled every 10 s, the selected terminal-feasible design comprises a 717.460 kWh/0.500 MW LIB, a 62.645 kWh/2.474 MW SC, and a boundary cutoff frequency of 0.000200 Hz. It reduces the grid-side peak power from 13.580 to 10.606 MW, corresponding to a peak-shaving rate of 21.90%, and absorbs 128.000 kWh, or 76.77%, of the bus-side RBE while satisfying terminal-SOC tolerances. Weight, normalization, threshold, terminal-SOC, and battery-stress analyses reveal material trade-offs, indicating that the reported sizing result is specific to the adopted design preferences and measured load record rather than a universal HSR configuration.

  • Open Access

    Hybrid Wind Power Forecasting for Turbine Clusters: Integrating Spatiotemporal WGANs with Extreme Missing-Data Resilience

    by Hongsheng Su, Yuwei Du, Yulong Che, Dan Li, Wenyao Su

    The global pursuit of sustainable development amplifies renewable energy’s strategic importance, positioning wind power as a vital modern grid component. Accurate wind forecasting is essential to counter inherent volatility, enabling robust grid operations, security protocols, and optimization strategies. Such predictive precision directly governs wind energy systems’ stability and sustainability. This research introduces a novel spatio-temporal hybrid model integrating convolutional neural networks (CNN), bidirectional long short-term memory (BiLSTM), and graph convolutional networks (GCN) to extract temporal patterns and meteorological dynamics (wind speed, direction, temperature) across 134 wind turbines. Building upon conventional methods, our architecture captures turbine spatio-temporal correlations while assimilating multivariate meteorological characteristics. Addressing data integrity compromises from equipment failures and extreme weather-which undermine data-driven models-we implement Wasserstein GAN (WGAN) for generative missing-value interpolation. Validation across severe data loss scenarios (30–90% missing values) demonstrates the model’s enhanced predictive capacity. Rigorous benchmarking confirms significant accuracy improvements and reduced forecasting errors.


  • Open Access

    Multi-objective Site Selection and Capacity Optimization of Distributed PV Energy Storage in Smart Distribution Network Based on Non-cooperative Game

    by Hongshen Su, Tian Zhao, Yulong Che, Leijiao Ge, Xiping Ma, Yangyang Zheng

    The disordered integration of high-penetration distributed photovoltaics (DPVs) into smart distribution networks has caused critical challenges including transformer reverse overloading and degraded power quality. Strategically deploying grid-level energy storage systems (ESSs) presents an effective solution to address these issues while enhancing operational efficiency and power quality. This paper proposes a non-cooperative game theory-driven optimal siting and sizing method for DPVs and ESSs in smart distribution networks. A tri-objective optimization model is formulated to mitigate grid vulnerability, reduce power losses, and minimize life-cycle carbon emissions of PV generation. To resolve conflicting interests among multiple stakeholders (DPV owners, ESS operators, and grid companies), a non-cooperative game framework with equilibrium strategies is established. An improved multi-objective particle swarm optimization (IMOPSO) algorithm is developed to solve the Nash equilibrium point that maximizes benefits for all participants. Case studies on IEEE 33 bus and IEEE-69 bus distribution systems demonstrate that the proposed method achieves: 2.43% reduction in grid vulnerability index, 4.29% decrease in network losses, and 44.44% reduction in PV life-cycle carbon emissions – all while maintaining voltage quality requirements and realizing Pareto-optimal allocation solutions for multi-stakeholder interests.


  • Open Access

    Denoising method for transformer acoustic signal based on CEEMDAN-SVD-wavelet threshold

    by Xuchun Hou, Yong Qian, Yulong Che

    To address the interference of ambient substation noise on the collected transformer sound signals and enhance the quality and reliability of the signals, this paper proposes a hybrid denoising method that integrates CEEMDAN, SVD, and wavelet thresholding. Firstly, the transformer sound signals are decomposed using CEEMDAN to obtain a series of Intrinsic Mode Functions (IMFs), screening the IMF components based on the differences in kurtosis values between the inherent transformer noise and the ambient noise. Then, Singular Value Decomposition (SVD) is employed to extract the principal components and remove noise from each Intrinsic Mode Function (IMF). Subsequently, wavelet thresholding is used to further denoise the signal. Finally, the denoised signal is reconstructed. This paper uses two evaluation indicators, the signal energy ratio and the noise suppression ratio, to analyze the denoising effect, the results show that the method used in this paper effectively removes noise while preserving the fidelity of the useful signal, this is of great significance for improving the subsequent feature extraction and modal identification based on the denoised signals.


  • A review of research on traction load models and modeling methods for electrified railways

    by Yulong Che, Xiaoru Wang, Leijiao Ge, Hongjian Lin, Xiaoqin Lyu, Hongsheng Su, Hao Wang


  • Open Access

    Configuration and Operation Optimization of Active Distribution Network Based on Wind-Solar-Hydrogen-Storage Integration

    by Hongsheng Su, Wenyao Su, Yulong Che, Xiping Ma, Tian Zhao, Limiao Ren

    Aiming at the issues of insufficient carrying capacity, limited flexibility, and weak source-network-load-storage coordination capability in distribution networks under the background of high-proportion new energy integration. This study proposes a bi-level optimization model for ADN integrating hybrid wind-solar-hydrogen-storage systems. First, an electro-hydrogen coupling system framework is constructed, including models for electrolytic hydrogen production, hydrogen storage, and fuel cells. Meanwhile, typical scenarios of wind-solar joint output are developed using Copula functions to characterize the variability of renewable energy generation. Second, a bi-level optimization model for ADN with electrolytic hydrogen production and storage systems is established: the upper layer employs a multi-objective differential evolution algorithm to solve the optimal siting and sizing problem, aiming to minimize life-cycle costs; the lower layer formulates a coordinated operation optimization model that incorporates contribution degree functions, Voltage Distribution Equilibrium Metric (VDEM), and the renewable energy consumption and absorption rate to ensure real-time synergistic optimization of power flow and voltage stability. Finally, simulations based on the IEEE 33-bus system demonstrate that the proposed method reduces the system’s energy curtailment costs by 34.6% and increases the renewable energy accommodation rate to 99.27%. This study verifies the effectiveness of electrolytic hydrogen production and storage systems as flexible loads in enhancing the hosting capacity of distribution networks, significantly improving grid operational flexibility, and source-network-load-storage coordination. These findings provide a technical pathway for the synergistic planning of high-renewable-penetration power systems, highlighting the critical role of electro-hydrogen coupling in balancing economic efficiency and technical reliability in modern ADN.


  • Temporal Impact of High-Speed Railway Traction Load on Grid Voltage Considering the Uncertainty

    by Yulong Che, Xiaojing Chen, Hongjian Lin, Yuan Gao, Xiaoqin Lyu, Yuanxi Chen

    The increasing traction load of high-speed railways with single-phase, high-power, and spatiotemporal movable has brought major impacts and challenges to the grid voltage quality. In this paper, a probabilistic analysis framework with uncertainty is investigated to implement the temporal impact of traction-load on grid voltage for high-speed railway applications. First, a single-phase traction power supply system (TPSS) is used, equivalent to a three-phase model based on the port transformation of the traction transformer. Meanwhile, a diffusion-based kernel density estimator (DKDE) is built as the timing probabilistic model of distributed traction loads. On this basis, a timing three-phase probabilistic load flow (3PLF) calculation model is constructed for the power grid connected with traction loads. Specifically, the three-point estimation method (3PEM) based on the correlation is applied to determine the calculation of 3PLF. Finally, the advantages of the DKDE and the 3PEM for the 3PLF are compared and verified. Essential factors such as the number of traction stations and their access method, as well as different levels of correlation coefficient, are contemplated in case studies. The results validated the probabilistic impact of the spatiotemporal movable traction loads on the power grid voltage.


  • Open Access

    Probabilistic Analysis of Impact on Grid Voltage Due to Traction Load of High-Speed Railway Considering Timing and Correlation

    by Yulong Che, Xiaoqin Lv, Xiaoru Wang

    Since the traction load of high-speed railway has the characteristics of mobility, asymmetry and impact high-power, the effect of traction load on power grid, especially the voltage has always been attracted much attention. Considering the increasing uncertainty in grid, as well as the spatiotemporal distribution and randomness of traction load, the probabilistic analysis method of the impact on grid voltage due to traction load of high-speed railway considering timing and correlation is proposed in this paper. Firstly, according to the properties for the time series and nonparametric probability of traction load, the timing probabilistic models of traction load at different spatial locations are established by using the diffusion-based kernel density estimator (DKDE). Secondly, through the port transformation of traction power supply system (TPSS) , the model of three-phase probabilistic load flow (3PLF) calculation of power grid connected with traction load is constructed . Then, based on the three-point estimation method (3PEM) considering the correlation, the timing 3PLF calculation of power grid with traction load is implemented to obtain the timing probability density function (PDF) of voltage amplitude and its unbalance. Finally, the two modified three-phase power systems are employed in combination with the measured data of traction station of a high-speed railway. It is verified the validity and computing efficiency of the proposed method. Moreover, the factors such as the number of traction station and its access method, different correlation and load levels, etc., are contemplated to probabilistically analyze the impact law of traction load on the grid voltage.