Laura Fratalocchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laura Fratalocchi has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Carlo Giorgio Visconti
Dipartimento di Energia, Politecnico di Milano, Via Lambruschini 4, Milano 20156, Italy
10 shared publications - Luca Lietti
Dipartimento di Energia, Politecnico di Milano, Via Lambruschini 4, Milano 20156, Italy
7 shared publications Enrico Tronconi
3 shared publications- Enrico Tronconi
Laboratory of Catalysis and Catalytic Processes, Dipartimento di Energia, Politecnico di Milano, via La Masa 34, Milano 20156, Italy
3 shared publications Gianpiero Groppi
3 shared publicationsLuca Lietti
3 shared publications
Latest Publications
- 5 April 2020
- Published by Elsevier in Applied Catalysis A: General
- Vol. 595, 117514
Effect of the cobalt-precursor on the reactivity of cobalt-based Fischer-Tropsch catalysts supported on stabilized alumina
- 5 April 2020
- Published by Elsevier in Applied Catalysis A: General
- Vol. 595, 117514
Effect of the cobalt-precursor on the reactivity of cobalt-based Fischer-Tropsch catalysts supported on stabilized alumina
- Open Access
- 1 February 2020
- Published by Elsevier in Catalysis Today
- Vol. 342, 79-87
On the passivation of platinum promoted cobalt-based Fischer-Tropsch catalyst
- 1 February 2020
- Published by Elsevier in Catalysis Today
- Vol. 342, 79-87
Open AccessOn the passivation of platinum promoted cobalt-based Fischer-Tropsch catalyst
- Open Access
- 20 September 2019
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 4 (11) , 1917-1921
The pivotal role of an interconnected cellular conductive structure to manage heat removal in compact Fischer–Tropsch fixed-bed reactors
Fischer–Tropsch synthesis is a strongly exothermic process wherein T-management is crucial. In this work, we demonstrate that diluting the catalyst bed with fragments of a conductive material does not grant the same excellent T-control as when the catalyst is randomly packed into a connected cellular structure made of the same material.
- 20 September 2019
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 4 (11) , 1917-1921
Open AccessThe pivotal role of an interconnected cellular conductive structure to manage heat removal in compact Fischer–Tropsch fixed-bed reactors
Fischer–Tropsch synthesis is a strongly exothermic process wherein T-management is crucial. In this work, we demonstrate that diluting the catalyst bed with fragments of a conductive material does not grant the same excellent T-control as when the catalyst is randomly packed into a connected cellular structure made of the same material.
- 1 August 2019
- Published by Elsevier in Applied Catalysis A: General
- Vol. 584, 117089
Effective Ce-based catalysts deposition on ceramic open cell foams
- 1 August 2019
- Published by Elsevier in Applied Catalysis A: General
- Vol. 584, 117089
Effective Ce-based catalysts deposition on ceramic open cell foams
- 21 May 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (12) , 3177-3192
Catalytic consequences of platinum deposition order on cobalt-based Fischer–Tropsch catalysts with low and high cobalt oxide dispersion
In this study, the effect of the presence of Pt in supported Co-based Fischer–Tropsch catalysts is investigated. To this end, the effect of the addition of 0.1 wt% Pt to the formulation of Al2O3-supported catalysts containing “large” (≈20 nm) or “small” (≈10 nm) Co3O4 crystallites is presented. The cobalt particle size can be changed by the presence of diethylene glycol (DEG) in Co-nitrate precursor solution. Pt is deposited on the support by following either the sequential deposition order (SDO), according to which Pt is impregnated onto the calcined Co-catalyst, or the reverse sequential deposition order (RSDO), according to which Pt is impregnated onto the support before Co. We show that despite the small amount of Pt used and regardless of the initial Co3O4 crystallite size and of the deposition order of Pt and Co, the catalyst reducibility is significantly improved when Pt is added to the catalyst formulation. Indeed, Pt favors the reduction of the smallest Co oxide particles, which are hardly reducible in the unpromoted samples, thus shifting the average Co0 particle size towards smaller values. In particular, in the case of “large” Co3O4 particles, Pt has a larger effect when added according to the RSDO method, very likely due to the stronger interaction that is established between Pt and Co. In comparison, the sample with smaller Co3O4 particles (prepared with DEG) shows a higher reducibility when prepared according to the SDO method, due to the presence of a significant fraction of small and difficult to reduce Co3O4 particles. The effect of Pt on the catalytic performance depends on a complex interplay involving the catalyst reducibility, number of Co metal sites and size of the Co0 particle aggregates. Pt strongly improves the performance of the samples originating from the larger cobalt oxide crystallites but on the other hand decreases the reactivity of the samples from the smaller particles. This is due to the fact that the small Co0 sites formed in the presence of Pt are in the size-range where the FTS is known to be structure sensitive and the intrinsic activity (TOF) is reduced.
- 21 May 2019
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 9 (12) , 3177-3192
Catalytic consequences of platinum deposition order on cobalt-based Fischer–Tropsch catalysts with low and high cobalt oxide dispersion
In this study, the effect of the presence of Pt in supported Co-based Fischer–Tropsch catalysts is investigated. To this end, the effect of the addition of 0.1 wt% Pt to the formulation of Al2O3-supported catalysts containing “large” (≈20 nm) or “small” (≈10 nm) Co3O4 crystallites is presented. The cobalt particle size can be changed by the presence of diethylene glycol (DEG) in Co-nitrate precursor solution. Pt is deposited on the support by following either the sequential deposition order (SDO), according to which Pt is impregnated onto the calcined Co-catalyst, or the reverse sequential deposition order (RSDO), according to which Pt is impregnated onto the support before Co. We show that despite the small amount of Pt used and regardless of the initial Co3O4 crystallite size and of the deposition order of Pt and Co, the catalyst reducibility is significantly improved when Pt is added to the catalyst formulation. Indeed, Pt favors the reduction of the smallest Co oxide particles, which are hardly reducible in the unpromoted samples, thus shifting the average Co0 particle size towards smaller values. In particular, in the case of “large” Co3O4 particles, Pt has a larger effect when added according to the RSDO method, very likely due to the stronger interaction that is established between Pt and Co. In comparison, the sample with smaller Co3O4 particles (prepared with DEG) shows a higher reducibility when prepared according to the SDO method, due to the presence of a significant fraction of small and difficult to reduce Co3O4 particles. The effect of Pt on the catalytic performance depends on a complex interplay involving the catalyst reducibility, number of Co metal sites and size of the Co0 particle aggregates. Pt strongly improves the performance of the samples originating from the larger cobalt oxide crystallites but on the other hand decreases the reactivity of the samples from the smaller particles. This is due to the fact that the small Co0 sites formed in the presence of Pt are in the size-range where the FTS is known to be structure sensitive and the intrinsic activity (TOF) is reduced.
- Open Access
- 1 October 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 349, 829-837
Intensifying heat transfer in Fischer-Tropsch tubular reactors through the adoption of conductive packed foams
- 1 October 2018
- Published by Elsevier in Chemical Engineering Journal
- Vol. 349, 829-837
Open AccessIntensifying heat transfer in Fischer-Tropsch tubular reactors through the adoption of conductive packed foams
- 1 April 2018
- Published by Elsevier in Applied Catalysis A: General
- Vol. 556, 92-103
A promising preparation method for highly active cobalt based Fischer-Tropsch catalysts supported on stabilized Al2O3
- 1 April 2018
- Published by Elsevier in Applied Catalysis A: General
- Vol. 556, 92-103
A promising preparation method for highly active cobalt based Fischer-Tropsch catalysts supported on stabilized Al2O3
- 1 November 2016
- Published by Elsevier in Catalysis Today
- Vol. 277, 161-170
CO2 hydrogenation to hydrocarbons over Co and Fe-based Fischer-Tropsch catalysts
- 1 November 2016
- Published by Elsevier in Catalysis Today
- Vol. 277, 161-170
CO2 hydrogenation to hydrocarbons over Co and Fe-based Fischer-Tropsch catalysts
- 3 June 2016
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 6 (16) , 6431-6440
On the performance of a Co-based catalyst supported on modified γ-Al2O3 during Fischer–Tropsch synthesis in the presence of co-fed water
The effect of water on the Fischer–Tropsch performance of a supported cobalt catalyst has been studied in a fixed bed reactor by running co-feeding experiments for more than 1000 h under industrially relevant process conditions. The adopted γ-Al2O3 support (Dp = 300 μm) has been modified with superficial cobalt aluminates to reduce the risk of formation of these species during the reaction as a consequence of the strong interaction between the active phase and the support. In spite of this precaution, the addition of water results in the slow deactivation of the catalyst, possibly caused by the oxidation of the reduced cobalt metal centers. The effect of water on the product distribution is more complex: in this case, water has both irreversible effects, which become stronger upon increasing the concentration of co-fed water, and reversible effects, which are clearly visible even with small concentrations of co-fed water. The two effects lead, in the presence of co-fed water, to decreased CH4 and alcohol selectivities and increased C25+ hydrocarbon, olefin and CO2 selectivities. These results can be explained by assuming that water suppresses hydrogenation reactions.
- 3 June 2016
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 6 (16) , 6431-6440
On the performance of a Co-based catalyst supported on modified γ-Al2O3 during Fischer–Tropsch synthesis in the presence of co-fed water
The effect of water on the Fischer–Tropsch performance of a supported cobalt catalyst has been studied in a fixed bed reactor by running co-feeding experiments for more than 1000 h under industrially relevant process conditions. The adopted γ-Al2O3 support (Dp = 300 μm) has been modified with superficial cobalt aluminates to reduce the risk of formation of these species during the reaction as a consequence of the strong interaction between the active phase and the support. In spite of this precaution, the addition of water results in the slow deactivation of the catalyst, possibly caused by the oxidation of the reduced cobalt metal centers. The effect of water on the product distribution is more complex: in this case, water has both irreversible effects, which become stronger upon increasing the concentration of co-fed water, and reversible effects, which are clearly visible even with small concentrations of co-fed water. The two effects lead, in the presence of co-fed water, to decreased CH4 and alcohol selectivities and increased C25+ hydrocarbon, olefin and CO2 selectivities. These results can be explained by assuming that water suppresses hydrogenation reactions.
- 1 February 2016
- Published by Elsevier in Applied Catalysis A: General
- Vol. 512, 36-42
Exploiting the effects of mass transfer to boost the performances of Co/γ-Al 2 O 3 eggshell catalysts for the Fischer–Tropsch synthesis
- 1 February 2016
- Published by Elsevier in Applied Catalysis A: General
- Vol. 512, 36-42
Exploiting the effects of mass transfer to boost the performances of Co/γ-Al 2 O 3 eggshell catalysts for the Fischer–Tropsch synthesis