Bimal Das
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Bimal Das has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Deepshikha Datta
Department of Basic Science and Humanities Institute of Engineering and Management (IEM) Kolkata University of Engineering and Management (UEM) Kolkata West Bengal India
22 shared publicationsSayantan Sarkar
Department of Chemical Engineering National Institute of Technology Durgapur Durgapur West Bengal India
10 shared publications- Deepshikha Datta
Department of Chemistry, Brainware University, Kolkata, India
9 shared publications Esha Mandal
Department of Biotechnology, National Institute of Technology Durgapur, Durgapur, West Bengal, India
6 shared publicationsGokulan Ravindiran
Department of Civil Engineering Dayananda Sagar College of Engineering Bengaluru Karnataka India
6 shared publications- Deepshikha Datta
Department of Basic Science & Humanities Institute of Engineering and Management (IEM), Kolkata, University of Engineering and Management (UEM) Kolkata India
5 shared publications
Latest Publications
- 9 November 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
CFD investigation of the hydrodynamic behaviour of inverse fluidized bed using non‐Newtonian fluids
The solid–liquid fluidization system has garnered significant scientific and industrial attention in recent years due to its broad applicability in process engineering. Contemporary global initiatives for the treatment of industrial effluents and wastewater have motivated researchers to explore inverse fluidization as a promising alternative to conventional fluidization techniques. This preference arises from its inherent advantages, including operational simplicity, ease of handling, lower process cost, reduced energy consumption, and enhanced overall efficiency. The present study focuses on the determination of the minimum inverse fluidization velocity using four different polymeric particles, such as low density polyethylene grade 1 (LDPE1), low density polyethylene grade 2 (LDPE2), high density polyethylene (HDPE), and polypropylene (PP), respectively, which are dispersed in a non‐Newtonian dilute solution of sodium salt of carboxymethyl cellulose at four varying concentrations. Empirical correlations have been developed to predict the minimum inverse fluidization velocity as a function of relevant physical and dynamic parameters of the system. A Euler–Euler multiphase model has been employed to discretize the system, solving two sets of Navier–Stokes equations, corresponding continuity equations, and a transport equation. The effects of variations in the concentration of the continuous phase, the initial mass of the dispersed phase, and the particle type on the volume fraction and velocity distribution have been systematically examined. The simulation results provide comprehensive insights into the hydrodynamic behaviour of the inverse fluidization process, offering a deeper understanding of system dynamics and performance characteristics.
- 9 November 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
CFD investigation of the hydrodynamic behaviour of inverse fluidized bed using non‐Newtonian fluids
The solid–liquid fluidization system has garnered significant scientific and industrial attention in recent years due to its broad applicability in process engineering. Contemporary global initiatives for the treatment of industrial effluents and wastewater have motivated researchers to explore inverse fluidization as a promising alternative to conventional fluidization techniques. This preference arises from its inherent advantages, including operational simplicity, ease of handling, lower process cost, reduced energy consumption, and enhanced overall efficiency. The present study focuses on the determination of the minimum inverse fluidization velocity using four different polymeric particles, such as low density polyethylene grade 1 (LDPE1), low density polyethylene grade 2 (LDPE2), high density polyethylene (HDPE), and polypropylene (PP), respectively, which are dispersed in a non‐Newtonian dilute solution of sodium salt of carboxymethyl cellulose at four varying concentrations. Empirical correlations have been developed to predict the minimum inverse fluidization velocity as a function of relevant physical and dynamic parameters of the system. A Euler–Euler multiphase model has been employed to discretize the system, solving two sets of Navier–Stokes equations, corresponding continuity equations, and a transport equation. The effects of variations in the concentration of the continuous phase, the initial mass of the dispersed phase, and the particle type on the volume fraction and velocity distribution have been systematically examined. The simulation results provide comprehensive insights into the hydrodynamic behaviour of the inverse fluidization process, offering a deeper understanding of system dynamics and performance characteristics.
- 30 October 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (41)
Nano Double Perovskite NaBaBi 1.97 Eu 0.03 MoO 6 : Synthesis and a Recyclable Catalyst for the Synthesis of Quinoxaline
The novel europium‐doped nano double perovskite NaBaBi 197 Eu 003 MoO 6 was successfully synthesized by citrate‐assisted sol–gel method and employed for the green synthesis of quinoxaline derivatives as an efficient heterogeneous catalyst. The crystalline structure and physicochemical properties of the catalyst were characterized by x‐ray diffraction, scanning electron microscopy‐energy dispersive x‐ray spectroscopy, Fourier transform infrared spectroscopy, Particle size analyzer, Inductively Coupled Plasma Optical Emission Spectroscopy, and Brunauer–Emmett–Teller surface area analysis. The catalyst possesses a highly crystalline orthorhombic double perovskite structure, a porous nanostructured morphology, a moderate surface area, and uniformly distributed constituent elements. The catalytic activity for condensation of o‐phenylenediamine with phenacyl bromides was investigated under environmentally benign conditions. Systematic optimization showed that 15 mol% catalyst loading in water provided optimum performance, affording quinoxaline derivatives in excellent isolated yields (84%–95%) within 40–45 min at room temperature. The statistical evaluation by one‐way ANOVA and quadratic regression analysis confirmed the reliability of the optimization results (R 2 = 0.963; adjusted R 2 = 0.951; p < 0.0001). The catalyst exhibited a broad substrate scope for both electron donating and electron‐withdrawing substituents and excellent tolerance to functional groups. A plausible catalytic mechanism involves Lewis acid activation by Bi 3+ /Eu 3+ centers and redox‐assisted aromatization by Mo─O active sites. The heterogeneous nature of the catalyst was verified by hot filtration and ICP–OES analysis, which showed negligible leaching of Na, Ba, Bi, Eu, and Mo (1 . 97 Eu 0 . 03 MoO 6 was identified as a promising heterogeneous catalyst for the sustainable synthesis of biologically important quinoxaline derivatives due to its high catalytic efficiency, green reaction conditions, easy catalyst recovery, and negligible metal leaching.
- 30 October 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (41)
Nano Double Perovskite NaBaBi 1.97 Eu 0.03 MoO 6 : Synthesis and a Recyclable Catalyst for the Synthesis of Quinoxaline
The novel europium‐doped nano double perovskite NaBaBi 197 Eu 003 MoO 6 was successfully synthesized by citrate‐assisted sol–gel method and employed for the green synthesis of quinoxaline derivatives as an efficient heterogeneous catalyst. The crystalline structure and physicochemical properties of the catalyst were characterized by x‐ray diffraction, scanning electron microscopy‐energy dispersive x‐ray spectroscopy, Fourier transform infrared spectroscopy, Particle size analyzer, Inductively Coupled Plasma Optical Emission Spectroscopy, and Brunauer–Emmett–Teller surface area analysis. The catalyst possesses a highly crystalline orthorhombic double perovskite structure, a porous nanostructured morphology, a moderate surface area, and uniformly distributed constituent elements. The catalytic activity for condensation of o‐phenylenediamine with phenacyl bromides was investigated under environmentally benign conditions. Systematic optimization showed that 15 mol% catalyst loading in water provided optimum performance, affording quinoxaline derivatives in excellent isolated yields (84%–95%) within 40–45 min at room temperature. The statistical evaluation by one‐way ANOVA and quadratic regression analysis confirmed the reliability of the optimization results (R 2 = 0.963; adjusted R 2 = 0.951; p < 0.0001). The catalyst exhibited a broad substrate scope for both electron donating and electron‐withdrawing substituents and excellent tolerance to functional groups. A plausible catalytic mechanism involves Lewis acid activation by Bi 3+ /Eu 3+ centers and redox‐assisted aromatization by Mo─O active sites. The heterogeneous nature of the catalyst was verified by hot filtration and ICP–OES analysis, which showed negligible leaching of Na, Ba, Bi, Eu, and Mo (1 . 97 Eu 0 . 03 MoO 6 was identified as a promising heterogeneous catalyst for the sustainable synthesis of biologically important quinoxaline derivatives due to its high catalytic efficiency, green reaction conditions, easy catalyst recovery, and negligible metal leaching.
- 14 October 2026
- Published by Wiley in Polymer Engineering & Science
Fabrication of High‐Performance Sustainable Packaging Composites via Blending of Recycled Polypropylene With Surface‐Functionalized Rice Husk‐Derived Nanosilica and Phthalate‐Modified Starch
Polypropylene is extensively used as a packaging material, creating a huge amount of waste after use. This work highlights the use of recycled polypropylene (rPP), starch phthalate, and modified nanosilica to produce sustainable packaging material. Both starch and nanosilica are functionalized to improve overall compatibility by increasing dispersion within the rPP matrix. Among the formulations, the optimal composition was 8:0.6:32 (starch/starch phthalate:nanosilica:rPP:PMS3). Characterization through FTIR, SEM, XRD, and TGA confirmed structural and morphological improvements. SEM analysis reveals a more uniform and refined surface upon replacing starch with starch phthalate, reducing mechanical vulnerability and phase separation due to enhanced interfacial adhesion. XRD results indicated crystallinity in the modified blend. The starch phthalate‐based composite shows superior degradability and improved tensile (38.12 MPa) and tear strength (88.24 N/mm) compared to the starch‐based system, showing a higher Young's modulus (1707 N/mm 2 ). Loss in mechanical properties under soil burial conditions for a period of 12 months reveals a decrease in tensile strength, tear strength, and Young's modulus to 25.9216 MPa, 59.1208 N/mm, and 829.6 N/mm 2 , respectively. PMS3 exhibited statistically significant, reproducible, and highly predictable degradation behavior in tensile strength, Young's modulus, and tear strength over 12 months ( R 2 ≥ 0.977, p < 0.05). Kinetic analysis showed that starch modification increased the apparent degradation rate by approximately 86.5%. Thus, the synergistic blend presents a promising sustainable alternative for packaging applications.
- 14 October 2026
- Published by Wiley in Polymer Engineering & Science
Fabrication of High‐Performance Sustainable Packaging Composites via Blending of Recycled Polypropylene With Surface‐Functionalized Rice Husk‐Derived Nanosilica and Phthalate‐Modified Starch
Polypropylene is extensively used as a packaging material, creating a huge amount of waste after use. This work highlights the use of recycled polypropylene (rPP), starch phthalate, and modified nanosilica to produce sustainable packaging material. Both starch and nanosilica are functionalized to improve overall compatibility by increasing dispersion within the rPP matrix. Among the formulations, the optimal composition was 8:0.6:32 (starch/starch phthalate:nanosilica:rPP:PMS3). Characterization through FTIR, SEM, XRD, and TGA confirmed structural and morphological improvements. SEM analysis reveals a more uniform and refined surface upon replacing starch with starch phthalate, reducing mechanical vulnerability and phase separation due to enhanced interfacial adhesion. XRD results indicated crystallinity in the modified blend. The starch phthalate‐based composite shows superior degradability and improved tensile (38.12 MPa) and tear strength (88.24 N/mm) compared to the starch‐based system, showing a higher Young's modulus (1707 N/mm 2 ). Loss in mechanical properties under soil burial conditions for a period of 12 months reveals a decrease in tensile strength, tear strength, and Young's modulus to 25.9216 MPa, 59.1208 N/mm, and 829.6 N/mm 2 , respectively. PMS3 exhibited statistically significant, reproducible, and highly predictable degradation behavior in tensile strength, Young's modulus, and tear strength over 12 months ( R 2 ≥ 0.977, p < 0.05). Kinetic analysis showed that starch modification increased the apparent degradation rate by approximately 86.5%. Thus, the synergistic blend presents a promising sustainable alternative for packaging applications.
- 15 May 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (19)
Extractive Flocculation Technique With a Composite Solvent Increases Yield of Refined Lubricating Oil
The present investigation proposes a comparative analysis for refining waste lubricating oil through extractive flocculation technique using composite solvent to maximize the yield. Experimental study reveals that with process constraints such as (i) reaction time of 80 min; (ii) reaction temperature of 80°C, (solvent to waste oil proportion of 80:20); (iii) coagulant dosage of 1 g/kg of solvent, maximum % yield of 94.45% was attained. Further, experimental results also portray maximum % sludge removal of 15.63% for the case of refined oil treated with composite solvent and bio‐based flocculant. Physicochemical properties of refined oil with composite solvent shows excellent characteristics that are close to virgin lubricant. The optimum recovery of high‐quality base stock with adaptation sustainable green principles can effectively mitigate the detrimental consequences of spent lubricant into the ecology and create energy efficient process for regeneration of base oil.
- 15 May 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (19)
Extractive Flocculation Technique With a Composite Solvent Increases Yield of Refined Lubricating Oil
The present investigation proposes a comparative analysis for refining waste lubricating oil through extractive flocculation technique using composite solvent to maximize the yield. Experimental study reveals that with process constraints such as (i) reaction time of 80 min; (ii) reaction temperature of 80°C, (solvent to waste oil proportion of 80:20); (iii) coagulant dosage of 1 g/kg of solvent, maximum % yield of 94.45% was attained. Further, experimental results also portray maximum % sludge removal of 15.63% for the case of refined oil treated with composite solvent and bio‐based flocculant. Physicochemical properties of refined oil with composite solvent shows excellent characteristics that are close to virgin lubricant. The optimum recovery of high‐quality base stock with adaptation sustainable green principles can effectively mitigate the detrimental consequences of spent lubricant into the ecology and create energy efficient process for regeneration of base oil.
- 10 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (12)
Synthesis, Characterization, and Mechanical Performance Evaluation of PET‐Based Packaging Films Reinforced With Surface‐Functionalized Rice Husk Nanosilica and Phthalate‐Modified Starch
This work highlights the conversion of PET, in combination with phthalated starch and modified nanosilica, into an environmentally friendly, biodegradable polymer blend. The surface‐functionalized nanosilica and phthalate‐modified starch undergo a good dispersion in the PET matrix. The high surface area (2.87 m 2 /g) and low particle size (9.87 μm) of the produced starch phthalate enhance its capability to form a homogeneous blend with PET. The produced blended sheets were extensively characterized by FTIR, SEM, XRD, and TGA analysis. SEM study investigates that on the addition of starch phthalate, the surface texture gets highly improved, leading to better compatibility with other materials in the matrix. Due to better binding properties, the interfacial tension gets reduced, which ultimately reduces the phase separation. XRD study reveals major peaks, which justify the crystalline nature of starch phthalate blended PET. FTIR analysis demonstrated that starch phthalate and nanosilica were successfully incorporated into polyolefin blends, indicating successful structural alteration. TGA showed that adding starch phthalate to PET lowers its thermal stability and decomposition temperature, suggesting that the modified composites are more biodegradable. Among different compositions, the best ratio of starch phthalate, modified nanosilica, and PET was found to be 8:0.6:32, having tensile strength 36 MPa, tear strength of 10.6 N/mm, and Young's modulus of 960 MPa. The produced blend can act as a superior packaging alternative for maintaining a sustainable environment.
- 10 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (12)
Synthesis, Characterization, and Mechanical Performance Evaluation of PET‐Based Packaging Films Reinforced With Surface‐Functionalized Rice Husk Nanosilica and Phthalate‐Modified Starch
This work highlights the conversion of PET, in combination with phthalated starch and modified nanosilica, into an environmentally friendly, biodegradable polymer blend. The surface‐functionalized nanosilica and phthalate‐modified starch undergo a good dispersion in the PET matrix. The high surface area (2.87 m 2 /g) and low particle size (9.87 μm) of the produced starch phthalate enhance its capability to form a homogeneous blend with PET. The produced blended sheets were extensively characterized by FTIR, SEM, XRD, and TGA analysis. SEM study investigates that on the addition of starch phthalate, the surface texture gets highly improved, leading to better compatibility with other materials in the matrix. Due to better binding properties, the interfacial tension gets reduced, which ultimately reduces the phase separation. XRD study reveals major peaks, which justify the crystalline nature of starch phthalate blended PET. FTIR analysis demonstrated that starch phthalate and nanosilica were successfully incorporated into polyolefin blends, indicating successful structural alteration. TGA showed that adding starch phthalate to PET lowers its thermal stability and decomposition temperature, suggesting that the modified composites are more biodegradable. Among different compositions, the best ratio of starch phthalate, modified nanosilica, and PET was found to be 8:0.6:32, having tensile strength 36 MPa, tear strength of 10.6 N/mm, and Young's modulus of 960 MPa. The produced blend can act as a superior packaging alternative for maintaining a sustainable environment.
- Open Access
- 30 November 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (12) , 3047-3054
Bioactive Polysaccharide from Ziziphus mauritiana: Isolation, Optimization and Evaluation as Binding Excipient
Natural polysaccharides have garnered considerable interest as excipients in pharmaceutical formulations due to their biocompatibility, functional versatility and structural diversity. This study focuses on the isolation, optimization and structural characterization of a novel polysaccharide derived from Ziziphus mauritiana and its evaluation as a tablet binding agent. The extraction process was optimized using response surface methodology (RSM), ensuring maximal yield under controlled conditions. Polysaccharide yield ranged 5.6-9.4%. Max yield (9.4%) achieved at 1:5 pulp-to-water ratio, 60 ºC extraction. Structural elucidation was performed through Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) and gas chromatography-mass spectrometry (GC-MS). Linkage analysis revealed the predominance of →4)-Manp-(1→glycosidic linkages, indicating a mannose-rich backbone. Monosaccharide profiling confirmed mannose as a major constituent. The polysaccharide was then formulated as a binder in compressed tablet matrices and compared against potato starch as a standard. The Z. mauritiana polysaccharide demonstrated favourable binding characteristics and resulted in significantly slower drug release compared to potato starch. After 12 h, formulations containing the novel binder released approximately 18% less drug, attributed to the presence of the mannose moiety and its influence on matrix integrity and hydration behaviour. The mannose-rich polysaccharide from Z. mauritiana exhibits promising potential as a natural binding agent in sustained-release tablet formulations. Its ability to modulate drug release kinetics, combined with its natural origin, supports its application as a viable alternative to conventional starch-based binders in pharmaceutical technologies.
- 30 November 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (12) , 3047-3054
Open AccessBioactive Polysaccharide from Ziziphus mauritiana: Isolation, Optimization and Evaluation as Binding Excipient
Natural polysaccharides have garnered considerable interest as excipients in pharmaceutical formulations due to their biocompatibility, functional versatility and structural diversity. This study focuses on the isolation, optimization and structural characterization of a novel polysaccharide derived from Ziziphus mauritiana and its evaluation as a tablet binding agent. The extraction process was optimized using response surface methodology (RSM), ensuring maximal yield under controlled conditions. Polysaccharide yield ranged 5.6-9.4%. Max yield (9.4%) achieved at 1:5 pulp-to-water ratio, 60 ºC extraction. Structural elucidation was performed through Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) and gas chromatography-mass spectrometry (GC-MS). Linkage analysis revealed the predominance of →4)-Manp-(1→glycosidic linkages, indicating a mannose-rich backbone. Monosaccharide profiling confirmed mannose as a major constituent. The polysaccharide was then formulated as a binder in compressed tablet matrices and compared against potato starch as a standard. The Z. mauritiana polysaccharide demonstrated favourable binding characteristics and resulted in significantly slower drug release compared to potato starch. After 12 h, formulations containing the novel binder released approximately 18% less drug, attributed to the presence of the mannose moiety and its influence on matrix integrity and hydration behaviour. The mannose-rich polysaccharide from Z. mauritiana exhibits promising potential as a natural binding agent in sustained-release tablet formulations. Its ability to modulate drug release kinetics, combined with its natural origin, supports its application as a viable alternative to conventional starch-based binders in pharmaceutical technologies.
- 28 September 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Effect of sodium alginate and corn starch bio‐flocculants on the maximization of yield % of refined lubricant obtained by environmental friendly extractive–flocculative approach: A comparative optimization study
Long‐term usage of lubricating oil produces waste that poses a risk to the environment, human health, and the economy. To create a sustainable ecosystem, the waste oil must be treated and disposed of properly. The extraction flocculation procedure for recovering used engine oil is the focus of the current study. To maximize the percentage recovery of refined oil, a comparative evaluation and optimization research was conducted using two distinct bio‐flocculants (sodium alginate and corn starch). The quality of refined oil and its surface morphology, with integration of elemental analysis, has been extensively addressed using fuller's earth as an adsorbent. The optimal parameters assessed were: extraction time of 60 and 80 min; temperatures of 50 and 60°C; solvent to waste oil ratios of 4.98:1 and 3:1; and flocculant dosages of 2 and 1 g/kg of solvent, for 1‐butanol‐Corn starch and 1‐butanol‐sodium alginate, respectively. The yield of recovered oil with 1‐butanol‐sodium alginate was found to be higher (91.81%) than 1‐butanol‐corn starch (88.25%) due to its higher tendency for eradication of carbonaceous matter, as well as other oxidative products from waste oil. The physico‐chemical parameters of the refined oil, utilizing sodium alginate as a bio‐flocculant, were determined to be a viscosity of 17.32 cSt at 100°C, a flash point of 231°C, and a pour point of −32°C, which closely resembles that of fresh oil. The refined oil can effectively alleviate the oil crisis and foster a sustainable green atmosphere.
- 28 September 2025
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Effect of sodium alginate and corn starch bio‐flocculants on the maximization of yield % of refined lubricant obtained by environmental friendly extractive–flocculative approach: A comparative optimization study
Long‐term usage of lubricating oil produces waste that poses a risk to the environment, human health, and the economy. To create a sustainable ecosystem, the waste oil must be treated and disposed of properly. The extraction flocculation procedure for recovering used engine oil is the focus of the current study. To maximize the percentage recovery of refined oil, a comparative evaluation and optimization research was conducted using two distinct bio‐flocculants (sodium alginate and corn starch). The quality of refined oil and its surface morphology, with integration of elemental analysis, has been extensively addressed using fuller's earth as an adsorbent. The optimal parameters assessed were: extraction time of 60 and 80 min; temperatures of 50 and 60°C; solvent to waste oil ratios of 4.98:1 and 3:1; and flocculant dosages of 2 and 1 g/kg of solvent, for 1‐butanol‐Corn starch and 1‐butanol‐sodium alginate, respectively. The yield of recovered oil with 1‐butanol‐sodium alginate was found to be higher (91.81%) than 1‐butanol‐corn starch (88.25%) due to its higher tendency for eradication of carbonaceous matter, as well as other oxidative products from waste oil. The physico‐chemical parameters of the refined oil, utilizing sodium alginate as a bio‐flocculant, were determined to be a viscosity of 17.32 cSt at 100°C, a flash point of 231°C, and a pour point of −32°C, which closely resembles that of fresh oil. The refined oil can effectively alleviate the oil crisis and foster a sustainable green atmosphere.
- 18 February 2025
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 23 (6) , 739-751
Equilibrium solubility and enthalpy of CO 2 absorption in aqueous blend of N,N- dimethyldipropylenetriamine and N-methyldiethanolamine
In this study, aqueous solutions of N,N-dimethyldipropylenetriamine (DMDPTA) + N-Methydiethanolamine (MDEA) are evaluated by experimental measurement of mixed solvent density, equilibrium CO 2 solubility and CO 2 absorption enthalpy in the varying range of temperature and composition. CO 2 solubility in the (DMDPTA + MDEA + H 2 O) solutions was measured at three temperatures (303 K, 313 K & 323 K) in the CO 2 partial pressures range of 2–210 kPa with varying DMDPTA mass % ranging from 5 to 15 % keeping total amine concentration at constant 30 mass %. The experimental density data of the formulated solvent were modeled using a Redlich-Keister excess molar volume model with a low average absolute relative deviation (AARD) of 0.011. A modified Kent-Eisenberg model was formulated to fit the experimental vapor-liquid equilibrium (VLE) data of CO 2 solubility in the formulated solvent. The modified Kent-Eisenberg model predictions compared well with the experimental data with AARD of 1.3 %., confirming the robustness of the model in capturing the intricate CO 2 solubility behavior of the examined blended amine solvent over the experimental range. The heat of CO 2 absorption was measured using a reaction calorimeter at 313 K for aqueous (5 % DMDPTA + 25 % MDEA) and (10 % DMDPTA + 20 % MDEA) solvents which also showed lower value of absorption enthalpy compared to the benchmark solvents like Monoethanolamine (MEA).
- 18 February 2025
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 23 (6) , 739-751
Equilibrium solubility and enthalpy of CO 2 absorption in aqueous blend of N,N- dimethyldipropylenetriamine and N-methyldiethanolamine
In this study, aqueous solutions of N,N-dimethyldipropylenetriamine (DMDPTA) + N-Methydiethanolamine (MDEA) are evaluated by experimental measurement of mixed solvent density, equilibrium CO 2 solubility and CO 2 absorption enthalpy in the varying range of temperature and composition. CO 2 solubility in the (DMDPTA + MDEA + H 2 O) solutions was measured at three temperatures (303 K, 313 K & 323 K) in the CO 2 partial pressures range of 2–210 kPa with varying DMDPTA mass % ranging from 5 to 15 % keeping total amine concentration at constant 30 mass %. The experimental density data of the formulated solvent were modeled using a Redlich-Keister excess molar volume model with a low average absolute relative deviation (AARD) of 0.011. A modified Kent-Eisenberg model was formulated to fit the experimental vapor-liquid equilibrium (VLE) data of CO 2 solubility in the formulated solvent. The modified Kent-Eisenberg model predictions compared well with the experimental data with AARD of 1.3 %., confirming the robustness of the model in capturing the intricate CO 2 solubility behavior of the examined blended amine solvent over the experimental range. The heat of CO 2 absorption was measured using a reaction calorimeter at 313 K for aqueous (5 % DMDPTA + 25 % MDEA) and (10 % DMDPTA + 20 % MDEA) solvents which also showed lower value of absorption enthalpy compared to the benchmark solvents like Monoethanolamine (MEA).
- 17 February 2025
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 23 (6) , 729-738
Synthesis of an excellent red phosphor and photo luminescence studies of Eu 3+ activated double perovskite phosphors NaSrBi 1- x Eu x WO 6 ( x = 0.0–0.24)
The sodium magnesium contains double perovskite structure compound i.e. NaSrBi 1- x Eu x WO 6 is synthesized by using citrate – gel method. This double perovskite structure compound is prepared at different concentrations i.e. ( x = 0.0–0.24) at different temperatures 500, 600, 700 °C for 5 h. Further, the prepared samples are characterized through different tools like XRD (X-ray diffractro meter), UV Visible Diffuse Reflectance Spectra, Photo luminescence spectra, FE SEM and CIE Software and the prepared sample shows different structures in various concentrations by using X-ray diffractrometer. Similarly, lattice parameters, peak positions are explained for all various concentrated samples at 700 °C sintered temperature for 5 h. However, the samples which are sintered at 700 °C for 5 h are excited at different wavelengths i.e. 395, 465, 540 nm, the corresponding emission intensities are also recorded. All the concentrated samples exhibits towards high intensity peaks at 595, 614 nm wavelengths in their emission spectra. The sample x = 0.12 shows highest red emission intensity out of all concentrations in the emission spectra. 5 D 0 - 7 F 1 & 5 D 0 - 7 F 2 are the major transitions formed in the emission spectra for every concentrated sample. In the same way the structural morphology is identified clearly by using FE SSEM. The CIE color coordinators are calculated and identified as very close to NTSC coordinators of red phosphor. Finally, the color purity is also calculated to analyze the quality of red light for the prepared red phosphor which is used in different W-LEDs applications.
- 17 February 2025
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 23 (6) , 729-738
Synthesis of an excellent red phosphor and photo luminescence studies of Eu 3+ activated double perovskite phosphors NaSrBi 1- x Eu x WO 6 ( x = 0.0–0.24)
The sodium magnesium contains double perovskite structure compound i.e. NaSrBi 1- x Eu x WO 6 is synthesized by using citrate – gel method. This double perovskite structure compound is prepared at different concentrations i.e. ( x = 0.0–0.24) at different temperatures 500, 600, 700 °C for 5 h. Further, the prepared samples are characterized through different tools like XRD (X-ray diffractro meter), UV Visible Diffuse Reflectance Spectra, Photo luminescence spectra, FE SEM and CIE Software and the prepared sample shows different structures in various concentrations by using X-ray diffractrometer. Similarly, lattice parameters, peak positions are explained for all various concentrated samples at 700 °C sintered temperature for 5 h. However, the samples which are sintered at 700 °C for 5 h are excited at different wavelengths i.e. 395, 465, 540 nm, the corresponding emission intensities are also recorded. All the concentrated samples exhibits towards high intensity peaks at 595, 614 nm wavelengths in their emission spectra. The sample x = 0.12 shows highest red emission intensity out of all concentrations in the emission spectra. 5 D 0 - 7 F 1 & 5 D 0 - 7 F 2 are the major transitions formed in the emission spectra for every concentrated sample. In the same way the structural morphology is identified clearly by using FE SSEM. The CIE color coordinators are calculated and identified as very close to NTSC coordinators of red phosphor. Finally, the color purity is also calculated to analyze the quality of red light for the prepared red phosphor which is used in different W-LEDs applications.
- 7 January 2025
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 22 (2) , 445-456
Europium activated bismuth containing double perovskite catalyzed synthesis of coumarin derivatives and its cytotoxicity evaluation
- 7 January 2025
- Published by Springer Nature in Journal of the Iranian Chemical Society
- Vol. 22 (2) , 445-456
Europium activated bismuth containing double perovskite catalyzed synthesis of coumarin derivatives and its cytotoxicity evaluation