Dengcheng Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dengcheng Liu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Chao Wang
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
2 shared publications - Bin Zhou
China Ship Scientific Research Center, Wuxi 214082, China
1 shared publication - Chao-Sheng Zheng
China Ship Scientific Research Center, Wuxi, China
1 shared publication - Hongbo Huang
National Key Laboratory on Ship Vibration and Noise, China Ship Scientific Research Center, Wuxi, China
1 shared publication - Kang Han
China Ship Scientific Research Center, Wuxi 214082, China
1 shared publication - Liang Li
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
1 shared publication
Latest Publications
- Open Access
- 12 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (22) , 2146
Design and Strength Assessment of an Ice-Class Propeller Based on Ice-Resistance Matching and Rule-Based Ice Loads
An integrated design and strength-assessment method is developed for high ice-class propellers operating under low-speed, high-thrust icebreaking conditions. Icebreaking resistance predicted by the Lindqvist method is used to determine the propulsion demand and guide propeller-scale matching. The first-stage redesign retains the original 5.25 m propeller diameter as a retrofit constraint but exhibits significant hydrodynamic deterioration under heavily loaded behind-hull cavitating conditions. The diameter constraint is therefore relaxed, and a series-chart-based scale-rematching procedure using a reference thrust coefficient of KT ≈ 0.19 gives a redesigned diameter of 6.0 m. Its structural strength is evaluated under five rule-based ice-loading cases using finite-element analysis. The governing case produces a maximum equivalent stress of 249.68 MPa, a maximum displacement of 16.89 mm, and a safety factor of 1.63, exceeding the required value of 1.3. The results highlight the importance of coupling overall scale matching, hydrodynamic design, and ice-load strength assessment in high ice-class propeller design.
- 12 November 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (22) , 2146
Open AccessDesign and Strength Assessment of an Ice-Class Propeller Based on Ice-Resistance Matching and Rule-Based Ice Loads
An integrated design and strength-assessment method is developed for high ice-class propellers operating under low-speed, high-thrust icebreaking conditions. Icebreaking resistance predicted by the Lindqvist method is used to determine the propulsion demand and guide propeller-scale matching. The first-stage redesign retains the original 5.25 m propeller diameter as a retrofit constraint but exhibits significant hydrodynamic deterioration under heavily loaded behind-hull cavitating conditions. The diameter constraint is therefore relaxed, and a series-chart-based scale-rematching procedure using a reference thrust coefficient of KT ≈ 0.19 gives a redesigned diameter of 6.0 m. Its structural strength is evaluated under five rule-based ice-loading cases using finite-element analysis. The governing case produces a maximum equivalent stress of 249.68 MPa, a maximum displacement of 16.89 mm, and a safety factor of 1.63, exceeding the required value of 1.3. The results highlight the importance of coupling overall scale matching, hydrodynamic design, and ice-load strength assessment in high ice-class propeller design.
- Open Access
- 30 October 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (11) , 387
The Numerical Prediction and Analysis of Propeller Cavitation Benchmark Tests of YUPENG Ship Model
The numerical simulation of propeller cavitation benchmark tests of YUPENG ship model is studied based on OpenFOAM, an open-source CFD (Computational Fluid Dynamics) platform, and the benchmark tests are introduced as well. The propeller cavitation shape and the hull pressure fluctuation are measured and predicted, respectively. The uncertainty in hull pressure fluctuation measurement is also analyzed, and the analysis showed the uncertainty is below 10%. The cavitation shape and the hull pressure fluctuation predicted show quite good agreement with the observations and measured data, and the influences of the grid resolutions on the unsteady propeller cavitation and the hull pressure fluctuation are investigated as well. The monotonic convergence achieved and the quite small grid uncertainty illustrate the reliability of the numerical simulation methods.
- 30 October 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (11) , 387
Open AccessThe Numerical Prediction and Analysis of Propeller Cavitation Benchmark Tests of YUPENG Ship Model
The numerical simulation of propeller cavitation benchmark tests of YUPENG ship model is studied based on OpenFOAM, an open-source CFD (Computational Fluid Dynamics) platform, and the benchmark tests are introduced as well. The propeller cavitation shape and the hull pressure fluctuation are measured and predicted, respectively. The uncertainty in hull pressure fluctuation measurement is also analyzed, and the analysis showed the uncertainty is below 10%. The cavitation shape and the hull pressure fluctuation predicted show quite good agreement with the observations and measured data, and the influences of the grid resolutions on the unsteady propeller cavitation and the hull pressure fluctuation are investigated as well. The monotonic convergence achieved and the quite small grid uncertainty illustrate the reliability of the numerical simulation methods.
- Open Access
- 23 September 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (10) , 330
Numerical Analysis of Influence of the Hull Couple Motion on the Propeller Exciting Force Characteristics
The numerical calculation was performed for the KRISO Container Ship (KCS) hull-propeller-rudder system with different freedom hull motion by employing the Reynolds-Averaged Navier-Stokes (RANS) method and adopting the overset grid. Firstly, the numerical simulation of hydrodynamics for a bare hull with the heave and pitch motion is carried out. The results show that the space non-uniformity of a nominal wake in the disk plane with motion is comparable to the case without motion. However, the time non-uniformity increases sharply and it has a significant positive relationship with the motion amplitude. Then, the propeller exciting force is calculated in the case including single heave, single pitch and their couple motion. It was found that both the ship and propeller hydrodynamic performance deteriorated dramatically due to the hull motion. Furthermore, the spectrum peak at the motion frequency is dominant in all the peak values and the larger the amplitude is, the higher the motion frequency peak is expected to be. For the propeller bearing force, the effect of the different hull motions appears as linear superimposition. However, the superimposition of different hull motions enlarges the propeller-induced fluctuating pressure in a single motion.
- 23 September 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (10) , 330
Open AccessNumerical Analysis of Influence of the Hull Couple Motion on the Propeller Exciting Force Characteristics
The numerical calculation was performed for the KRISO Container Ship (KCS) hull-propeller-rudder system with different freedom hull motion by employing the Reynolds-Averaged Navier-Stokes (RANS) method and adopting the overset grid. Firstly, the numerical simulation of hydrodynamics for a bare hull with the heave and pitch motion is carried out. The results show that the space non-uniformity of a nominal wake in the disk plane with motion is comparable to the case without motion. However, the time non-uniformity increases sharply and it has a significant positive relationship with the motion amplitude. Then, the propeller exciting force is calculated in the case including single heave, single pitch and their couple motion. It was found that both the ship and propeller hydrodynamic performance deteriorated dramatically due to the hull motion. Furthermore, the spectrum peak at the motion frequency is dominant in all the peak values and the larger the amplitude is, the higher the motion frequency peak is expected to be. For the propeller bearing force, the effect of the different hull motions appears as linear superimposition. However, the superimposition of different hull motions enlarges the propeller-induced fluctuating pressure in a single motion.