Zhennan Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Zhennan Deng has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
Abdullrahman M. Al-Bishari
School and Hospital of Stomatology, Wenzhou Medical University, Wenzhou, China
2 shared publicationsAisha A. Al-Bishari
College of Dentistry, University of Science and Technology, Sanaa, Yemen
2 shared publicationsAnni Wu
School and Hospital of Stomatology, Wenzhou Medical University, 268# Xueyuan West Road, Lucheng District, Wenzhou, Zhejiang Province, China
2 shared publicationsBilal A. Al-Shaaobi
School and Hospital of Stomatology, Wenzhou Medical University, Wenzhou, China
2 shared publicationsBingbing Zhu
Wenzhou Med Univ, Sch Stomatol, Wenzhou 325000, Peoples R China
2 shared publicationsBingqian Yang
School and Hospital of Stomatology, Institute of Stomatology, Wenzhou Medical University, Wenzhou, China
2 shared publications
Latest Publications
- Open Access
- 23 June 2026
- Published by Springer Nature in BMC Oral Health
Screening the optimal parameters for Er: YAG laser debonding of lithium disilicate veneers: an in vitro study
Although the efficacy of Er: YAG lasers for debonding all-ceramic restorations has been validated, further research is required to optimize the operational parameters for Er: YAG laser debonding of lithium disilicate veneers and to determine whether laser debonding alters the translucency, hardness, and rebonding strength of lithium disilicate veneers. This study aimed to evaluate the comprehensive debonding performance of an Er: YAG laser operating at a clinically prevalent power of 4.5 W with three different energy and frequency parameter combinations. The evaluation was performed on IPS e.max CAD lithium disilicate ceramic specimens with two thicknesses (0.5 mm and 1.0 mm), focusing on debonding time and intrapulpal temperature variation. Furthermore, the changes in ceramic rebonding strength, surface morphology, translucency, and Vickers hardness following laser debonding were analyzed, so as to identify the optimal parameters for clinical laser debonding of ceramic veneers. Forty freshly extracted maxillary first premolars were prepared to achieve standardized uniform enamel surfaces. CAD/CAM ceramic blocks were fabricated into two sizes of square specimens: 3 × 3 mm2 square specimens for the assessment of debonding efficiency and rebonding strength, and 10 × 10 mm2 square specimens for translucency and Vickers hardness tests. All specimens were categorized into two groups based on ceramic thickness (0.5 and 1.0 mm). Each thickness group was further subdivided into four subgroups with distinct laser parameters: a non-irradiated control group (E0), 300 mJ/15 Hz (E1), 225 mJ/20 Hz (E2), and 150 mJ/30 Hz (E3). The 3 × 3 mm2 square specimens were bonded to prepared tooth surfaces using Variolink N resin cement and subsequently debonded with an Er: YAG laser according to the corresponding subgroup parameters. After debonding, the specimens were rebonded to the tooth surfaces using the same resin cement. Debonding time and intrapulpal temperature change (∆T) were recorded throughout the procedure. The fracture modes of the veneer bonding interfaces were observed under a stereomicroscope, and shear rebonding strength was measured via a universal testing machine. The 10 × 10 mm2 ceramic specimens were irradiated with the corresponding Er: YAG laser parameters for 30 s. Post-treatment evaluations included observations of surface morphology and quantitative measurements of translucency and Vickers hardness. A two-way analysis of variance was adopted for statistical analysis. The Pearson correlation coefficient was calculated to analyze the correlation between debonding time and intrapulpal temperature variation. For specimens with the same thickness, the E3 group exhibited significantly longer debonding time and greater intrapulpal temperature elevation compared with the E1 and E2 groups, whereas no significant differences were detected between the E1 and E2 groups. For the same laser parameters, 1.0 mm-thick veneers showed significantly longer debonding time and higher temperature variation than 0.5 mm-thick veneers. A strong positive correlation was identified between debonding time and ∆T (R² = 0.739). The main failure mode of the adhesive surface was classified as type 1. No significant differences in rebonding strength were observed after debonding. In addition, laser irradiation exerted no remarkable influence on the surface morphology, translucency, or Vickers hardness of lithium disilicate ceramic specimens. At a constant laser power of 4.5 W, both E1 and E2 parameter settings are applicable for the debonding of 1.0 mm-thick lithium disilicate veneers, while the E2 setting is optimal for 0.5 mm-thick veneers. Er: YAG laser debonding treatment has no significant adverse effect on the rebonding strength, surface morphology, translucency, or hardness of lithium disilicate ceramics. The outcomes of Er: YAG laser debonding for all-ceramic veneers are affected by laser energy, frequency, and veneer thickness. Optimized Er: YAG laser parameters should be selected according to the thickness of all-ceramic veneers. Given the preservation of mechanical strength and translucency after laser debonding, the treated all-ceramic veneers are reusable for clinical application.
- 23 June 2026
- Published by Springer Nature in BMC Oral Health
Open AccessScreening the optimal parameters for Er: YAG laser debonding of lithium disilicate veneers: an in vitro study
Although the efficacy of Er: YAG lasers for debonding all-ceramic restorations has been validated, further research is required to optimize the operational parameters for Er: YAG laser debonding of lithium disilicate veneers and to determine whether laser debonding alters the translucency, hardness, and rebonding strength of lithium disilicate veneers. This study aimed to evaluate the comprehensive debonding performance of an Er: YAG laser operating at a clinically prevalent power of 4.5 W with three different energy and frequency parameter combinations. The evaluation was performed on IPS e.max CAD lithium disilicate ceramic specimens with two thicknesses (0.5 mm and 1.0 mm), focusing on debonding time and intrapulpal temperature variation. Furthermore, the changes in ceramic rebonding strength, surface morphology, translucency, and Vickers hardness following laser debonding were analyzed, so as to identify the optimal parameters for clinical laser debonding of ceramic veneers. Forty freshly extracted maxillary first premolars were prepared to achieve standardized uniform enamel surfaces. CAD/CAM ceramic blocks were fabricated into two sizes of square specimens: 3 × 3 mm2 square specimens for the assessment of debonding efficiency and rebonding strength, and 10 × 10 mm2 square specimens for translucency and Vickers hardness tests. All specimens were categorized into two groups based on ceramic thickness (0.5 and 1.0 mm). Each thickness group was further subdivided into four subgroups with distinct laser parameters: a non-irradiated control group (E0), 300 mJ/15 Hz (E1), 225 mJ/20 Hz (E2), and 150 mJ/30 Hz (E3). The 3 × 3 mm2 square specimens were bonded to prepared tooth surfaces using Variolink N resin cement and subsequently debonded with an Er: YAG laser according to the corresponding subgroup parameters. After debonding, the specimens were rebonded to the tooth surfaces using the same resin cement. Debonding time and intrapulpal temperature change (∆T) were recorded throughout the procedure. The fracture modes of the veneer bonding interfaces were observed under a stereomicroscope, and shear rebonding strength was measured via a universal testing machine. The 10 × 10 mm2 ceramic specimens were irradiated with the corresponding Er: YAG laser parameters for 30 s. Post-treatment evaluations included observations of surface morphology and quantitative measurements of translucency and Vickers hardness. A two-way analysis of variance was adopted for statistical analysis. The Pearson correlation coefficient was calculated to analyze the correlation between debonding time and intrapulpal temperature variation. For specimens with the same thickness, the E3 group exhibited significantly longer debonding time and greater intrapulpal temperature elevation compared with the E1 and E2 groups, whereas no significant differences were detected between the E1 and E2 groups. For the same laser parameters, 1.0 mm-thick veneers showed significantly longer debonding time and higher temperature variation than 0.5 mm-thick veneers. A strong positive correlation was identified between debonding time and ∆T (R² = 0.739). The main failure mode of the adhesive surface was classified as type 1. No significant differences in rebonding strength were observed after debonding. In addition, laser irradiation exerted no remarkable influence on the surface morphology, translucency, or Vickers hardness of lithium disilicate ceramic specimens. At a constant laser power of 4.5 W, both E1 and E2 parameter settings are applicable for the debonding of 1.0 mm-thick lithium disilicate veneers, while the E2 setting is optimal for 0.5 mm-thick veneers. Er: YAG laser debonding treatment has no significant adverse effect on the rebonding strength, surface morphology, translucency, or hardness of lithium disilicate ceramics. The outcomes of Er: YAG laser debonding for all-ceramic veneers are affected by laser energy, frequency, and veneer thickness. Optimized Er: YAG laser parameters should be selected according to the thickness of all-ceramic veneers. Given the preservation of mechanical strength and translucency after laser debonding, the treated all-ceramic veneers are reusable for clinical application.
- 14 April 2026
- Published by Elsevier in Journal of Controlled Release
- Vol. 394, 114929
Dual-stimuli responsive on-demand CO-releasing coating on titanium dental implants for antibacterial, anti-inflammatory and osteogenic effects
- 14 April 2026
- Published by Elsevier in Journal of Controlled Release
- Vol. 394, 114929
Dual-stimuli responsive on-demand CO-releasing coating on titanium dental implants for antibacterial, anti-inflammatory and osteogenic effects
- Open Access
- 16 September 2025
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 13, 1664137
Correction: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold
Correction: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffoldAbdullrahman M. Al-Bishari1, Bilal A. Al-Shaaobi1, Aisha A. Al-Bishari2, Mohammed A. Al-Baadani1, Liang Yu3, Jiating Shen1, Lei Cai1, Yiding Shen1, Zhennan Deng1*, and Peng Gao1*1 School and Hospital of Stomatology, Wenzhou Medical University, Wenzhou, China. 2 College of Dentistry, University of Science & Technology, Sanaa, Yemen. 3 School Hospital of Stomatology, Zhejiang Chinese Medical University, Hangzhou, China.* Correspondence: Zhennan Deng, dengzhennan@wmu.edu.cn;Peng Gao, penggao@wmu.edu.cn.Keywords: electrospinning, vitamin D, curcumin, anti-inflammatory, bone regenerationCorrection on: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold.by Al-Bishari AM, Al-Shaaobi BA, Al-Bishari AA, Al-Baadani MA, Yu L, Shen J, Cai L, Shen Y, Deng Z and Gao P (2022), Front. Bioeng. Biotechnol. 10:975431. doi: 10.3389/fbioe.2022.975431.Error in figure/tableIn the published article, there was an error in figure 6A as published. We mistakenly used the image from the PCL group for the PCL/Cur group. The corrected figure 6A and its caption appear below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
- 16 September 2025
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 13, 1664137
Open AccessCorrection: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold
Correction: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffoldAbdullrahman M. Al-Bishari1, Bilal A. Al-Shaaobi1, Aisha A. Al-Bishari2, Mohammed A. Al-Baadani1, Liang Yu3, Jiating Shen1, Lei Cai1, Yiding Shen1, Zhennan Deng1*, and Peng Gao1*1 School and Hospital of Stomatology, Wenzhou Medical University, Wenzhou, China. 2 College of Dentistry, University of Science & Technology, Sanaa, Yemen. 3 School Hospital of Stomatology, Zhejiang Chinese Medical University, Hangzhou, China.* Correspondence: Zhennan Deng, dengzhennan@wmu.edu.cn;Peng Gao, penggao@wmu.edu.cn.Keywords: electrospinning, vitamin D, curcumin, anti-inflammatory, bone regenerationCorrection on: Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold.by Al-Bishari AM, Al-Shaaobi BA, Al-Bishari AA, Al-Baadani MA, Yu L, Shen J, Cai L, Shen Y, Deng Z and Gao P (2022), Front. Bioeng. Biotechnol. 10:975431. doi: 10.3389/fbioe.2022.975431.Error in figure/tableIn the published article, there was an error in figure 6A as published. We mistakenly used the image from the PCL group for the PCL/Cur group. The corrected figure 6A and its caption appear below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
- Open Access
- 6 January 2025
- Published by Oxford University Press (OUP) in Regenerative Biomaterials
- Vol. 12, rbaf033
Sr-doped surfaces with 2D black phosphorus nanosheets for enhanced photothermal antibacterial activity and zirconia implant osseointegration
Zirconia (ZrO2) has emerged as a preferred material for dental implants due to its excellent chemical inertness, absence of metal allergies and esthetic appeal. However, its limited bioactivity regarding infection resistance and early osseointegration hinders its implantation success rate compared to titanium implants. Herein, we developed a PDPA@Sr/BP coating for ZrO2 implants to address these limitations. First, inspired by the adhesive properties of mussel foot proteins, a PDPA@Sr coating enriched with positively charged amine groups and strontium (Sr) ions was applied to the ZrO2 surface. This coating stably anchored black phosphorus (BP) to the implant, effectively regulating its degradation rate and ensuring long-lasting antibacterial properties. Under near-infrared (NIR) light irradiation, BP generated localized heat, efficiently killing bacteria. Simultaneously, the release of Sr and phosphate ions from the PDPA@Sr/BP coating promoted bone formation and enhanced osseointegration. This study systematically evaluated the antibacterial effects and osseointegration-promoting properties of the PDPA@Sr/BP coating through both in vitro and in vivo experiments. The results demonstrated that compared to untreated ZrO2 surfaces, the coating significantly enhances the implant’s antibacterial properties and accelerates its surface osseointegration. This study proposes an innovative strategy to improve the clinical performance of ZrO2 implants, demonstrating substantial potential for clinical translation.
- 6 January 2025
- Published by Oxford University Press (OUP) in Regenerative Biomaterials
- Vol. 12, rbaf033
Open AccessSr-doped surfaces with 2D black phosphorus nanosheets for enhanced photothermal antibacterial activity and zirconia implant osseointegration
Zirconia (ZrO2) has emerged as a preferred material for dental implants due to its excellent chemical inertness, absence of metal allergies and esthetic appeal. However, its limited bioactivity regarding infection resistance and early osseointegration hinders its implantation success rate compared to titanium implants. Herein, we developed a PDPA@Sr/BP coating for ZrO2 implants to address these limitations. First, inspired by the adhesive properties of mussel foot proteins, a PDPA@Sr coating enriched with positively charged amine groups and strontium (Sr) ions was applied to the ZrO2 surface. This coating stably anchored black phosphorus (BP) to the implant, effectively regulating its degradation rate and ensuring long-lasting antibacterial properties. Under near-infrared (NIR) light irradiation, BP generated localized heat, efficiently killing bacteria. Simultaneously, the release of Sr and phosphate ions from the PDPA@Sr/BP coating promoted bone formation and enhanced osseointegration. This study systematically evaluated the antibacterial effects and osseointegration-promoting properties of the PDPA@Sr/BP coating through both in vitro and in vivo experiments. The results demonstrated that compared to untreated ZrO2 surfaces, the coating significantly enhances the implant’s antibacterial properties and accelerates its surface osseointegration. This study proposes an innovative strategy to improve the clinical performance of ZrO2 implants, demonstrating substantial potential for clinical translation.
- Open Access
- 18 May 2023
- Published by Springer Nature in Journal of Translational Medicine
- Vol. 21 (1) , 1-17
Mitochondrial impairment and downregulation of Drp1 phosphorylation underlie the antiproliferative and proapoptotic effects of alantolactone on oral squamous cell carcinoma cells
Background: Oral squamous cell carcinoma (OSCC) is one of the most prevalent and fatal oral cancers. Mitochondria-targeting therapies represent promising strategies against various cancers, but their applications in treating OSCC are limited. Alantolactone (ALT) possesses anticancer properties and also regulates mitochondrial events. In this study, we explored the effects of ALT on OSCC and the related mechanisms. Methods: The OSCC cells were treated with varying concentrations and duration of ALT and N-Acetyl-l-cysteine (NAC). The cell viability and colony formation were assessed. The apoptotic rate was evaluated by flow cytometry with Annexin V-FITC/PI double staining. We used DCFH-DA and flow cytometry to detect reactive oxygen species (ROS) production and DAF-FM DA to investigate reactive nitrogen species (RNS) level. Mitochondrial function was reflected by mitochondrial reactive oxygen species (ROS), mitochondrial membrane potential (MMP), and ATP levels. KEGG enrichment analyses determined the mitochondrial-related hub genes involved in OSCC progression. Dynamin-related protein 1 (Drp1) overexpression plasmids were further transfected into the cells to analyze the role of Drp1 in OSCC progression. Immunohistochemistry staining and western blot verified the expression of the protein. Results: ALT exerted anti-proliferative and pro-apoptosis effects on OSCC cells. Mechanistically, ALT elicited cell injury by promoting ROS production, mitochondrial membrane depolarization, and ATP depletion, which were reversed by NAC. Bioinformatics analysis showed that Drp1 played a crucial role in OSCC progression. OSCC patients with low Drp1 expression had a higher survival rate. The OSCC cancer tissues presented higher phosphorylated-Drp1 and Drp1 levels than the normal tissues. The results further showed that ALT suppressed Drp1 phosphorylation in OSCC cells. Moreover, Drp1 overexpression abolished the reduced Drp1 phosphorylation by ALT and promoted the cell viability of ALT-treated cells. Drp1 overexpression also reversed the mitochondrial dysfunction induced by ALT, with decreased ROS production, and increased mitochondrial membrane potential and ATP level. Conclusions: ALT inhibited proliferation and promoted apoptosis of oral squamous cell carcinoma cells via impairment of mitochondrial homeostasis and regulation of Drp1. The results provide a solid basis for ALT as a therapeutic candidate for treating OSCC, with Drp1 being a novel therapeutic target in treating OSCC.
- 18 May 2023
- Published by Springer Nature in Journal of Translational Medicine
- Vol. 21 (1) , 1-17
Open AccessMitochondrial impairment and downregulation of Drp1 phosphorylation underlie the antiproliferative and proapoptotic effects of alantolactone on oral squamous cell carcinoma cells
Background: Oral squamous cell carcinoma (OSCC) is one of the most prevalent and fatal oral cancers. Mitochondria-targeting therapies represent promising strategies against various cancers, but their applications in treating OSCC are limited. Alantolactone (ALT) possesses anticancer properties and also regulates mitochondrial events. In this study, we explored the effects of ALT on OSCC and the related mechanisms. Methods: The OSCC cells were treated with varying concentrations and duration of ALT and N-Acetyl-l-cysteine (NAC). The cell viability and colony formation were assessed. The apoptotic rate was evaluated by flow cytometry with Annexin V-FITC/PI double staining. We used DCFH-DA and flow cytometry to detect reactive oxygen species (ROS) production and DAF-FM DA to investigate reactive nitrogen species (RNS) level. Mitochondrial function was reflected by mitochondrial reactive oxygen species (ROS), mitochondrial membrane potential (MMP), and ATP levels. KEGG enrichment analyses determined the mitochondrial-related hub genes involved in OSCC progression. Dynamin-related protein 1 (Drp1) overexpression plasmids were further transfected into the cells to analyze the role of Drp1 in OSCC progression. Immunohistochemistry staining and western blot verified the expression of the protein. Results: ALT exerted anti-proliferative and pro-apoptosis effects on OSCC cells. Mechanistically, ALT elicited cell injury by promoting ROS production, mitochondrial membrane depolarization, and ATP depletion, which were reversed by NAC. Bioinformatics analysis showed that Drp1 played a crucial role in OSCC progression. OSCC patients with low Drp1 expression had a higher survival rate. The OSCC cancer tissues presented higher phosphorylated-Drp1 and Drp1 levels than the normal tissues. The results further showed that ALT suppressed Drp1 phosphorylation in OSCC cells. Moreover, Drp1 overexpression abolished the reduced Drp1 phosphorylation by ALT and promoted the cell viability of ALT-treated cells. Drp1 overexpression also reversed the mitochondrial dysfunction induced by ALT, with decreased ROS production, and increased mitochondrial membrane potential and ATP level. Conclusions: ALT inhibited proliferation and promoted apoptosis of oral squamous cell carcinoma cells via impairment of mitochondrial homeostasis and regulation of Drp1. The results provide a solid basis for ALT as a therapeutic candidate for treating OSCC, with Drp1 being a novel therapeutic target in treating OSCC.
- 3 April 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 226, 113293
Titanium surface-grafted zwitterionic polymers with an anti-polyelectrolyte effect enhances osteogenesis
- 3 April 2023
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 226, 113293
Titanium surface-grafted zwitterionic polymers with an anti-polyelectrolyte effect enhances osteogenesis
- Open Access
- 8 August 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 975431
Vitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold
The accelerating bone healing process is still a major challenge in clinical orthopedics, especially in critical-sized bone defects. Recently, Nanofiber membranes are showing increasing attention in the biomedical field due to their good biocompatibility, mechanical stability, and the ability to work as a drug carrier to achieve localized and sustained drug delivery. Herein, a multifunction nanofiber membrane loaded with vitamin D (Vit D) and curcumin (Cur) was successfully fabricated using electrospinning technology. In addition, we innovatively modified Vit D with PEG to improve the hydrophilicity of PCL nanofibers. The vitro results of CCK-8, alkaline phosphatase (ALP) and mineralization demonstrated that the PCL/Vit D-Cur membrane had great potential for enhancing the proliferation/differentiation of osteoblasts. Moreover, the synergistic effect of Vit D-Cur loaded PCL nanofiber membrane showed a superior ability to improve the anti-inflammatory activity through M2 polarization. Furthermore, in vivo results confirmed that the defect treated with PCL/Vit D-Cur nanofiber membrane was filled with the newly formed bone after 1 month. These results indicate that the Vit D/Cur loaded membrane can be applied for potential bone regeneration therapy.
- 8 August 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 975431
Open AccessVitamin D and curcumin-loaded PCL nanofibrous for engineering osteogenesis and immunomodulatory scaffold
The accelerating bone healing process is still a major challenge in clinical orthopedics, especially in critical-sized bone defects. Recently, Nanofiber membranes are showing increasing attention in the biomedical field due to their good biocompatibility, mechanical stability, and the ability to work as a drug carrier to achieve localized and sustained drug delivery. Herein, a multifunction nanofiber membrane loaded with vitamin D (Vit D) and curcumin (Cur) was successfully fabricated using electrospinning technology. In addition, we innovatively modified Vit D with PEG to improve the hydrophilicity of PCL nanofibers. The vitro results of CCK-8, alkaline phosphatase (ALP) and mineralization demonstrated that the PCL/Vit D-Cur membrane had great potential for enhancing the proliferation/differentiation of osteoblasts. Moreover, the synergistic effect of Vit D-Cur loaded PCL nanofiber membrane showed a superior ability to improve the anti-inflammatory activity through M2 polarization. Furthermore, in vivo results confirmed that the defect treated with PCL/Vit D-Cur nanofiber membrane was filled with the newly formed bone after 1 month. These results indicate that the Vit D/Cur loaded membrane can be applied for potential bone regeneration therapy.
- 22 June 2022
- Published by Elsevier in Dental Materials
- Vol. 38 (8) , 1362-1375
Improving the valence self-reversible conversion of cerium nanoparticles on titanium implants by lanthanum doping to enhance ROS elimination and osteogenesis
- 22 June 2022
- Published by Elsevier in Dental Materials
- Vol. 38 (8) , 1362-1375
Improving the valence self-reversible conversion of cerium nanoparticles on titanium implants by lanthanum doping to enhance ROS elimination and osteogenesis
- 1 April 2021
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 123, 111969
Effects of titanium with different micro/nano structures on the ability of osteoblasts to resist oxidative stress
- 1 April 2021
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 123, 111969
Effects of titanium with different micro/nano structures on the ability of osteoblasts to resist oxidative stress
- Open Access
- 8 October 2020
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 8, 573464
Antibacterial and Osteogenic Functionalization of Titanium With Silicon/Copper-Doped High-Energy Shot Peening-Assisted Micro-Arc Oxidation Technique
Antibacterial and osteogenic functionalization of titanium (Ti) implants will greatly expand their clinical indications in immediate implant therapy, accelerate osteointegration, and enhance long-term prognosis. We had recently shown that the high-energy shot peening (HESP)-assisted micro-arc oxidation (MAO) significantly improved the bioactivity and coating stability of Ti-based substrates. In this study, we further functionalized Ti with antibacterial and osteogenic properties by doping silicon (Si) and/or copper (Cu) ions into HESP/MAO-treated coatings. Physicochemical characterization displayed that the doping of Si and Cu in HESP/MAO-treated coatings (Si/Cu-MAO) did not significantly change their surface topography, roughness, crystal structure, coating thickness, bonding strength, and wettability. The results of X-ray photoelectron spectroscopy (XPS) showed that Si and Cu in the Si/Cu-MAO coating was in the form of silicate radical (SiO32–) and bivalent copper (Cu2+), respectively. The total amounts of Si and Cu were about 13.5 and 5.8 μg/cm2, which released about 33.2 and 31.3% within 14 day, respectively. Compared with the control group (MAO), Si doping samples (MAO-Si) significantly increased the cell viability, alkaline phosphatase (ALP) activity, mineralization and osteogenic genes (ALP, collagen I and osteocalcin) expression of MC3T3-E1 cells. Furthermore, the addition of Cu presented good bactericidal property against both Staphylococcus aureus and Streptococcus mutans (even under the co-culture condition of bacteria and MC3T3-E1 cells): the bacteriostatic rate of both bacteria was over 95%. In conclusion, the novel bioactive Si/Cu-MAO coating with antibacterial and osteogenic properties is a promising functionalization method for orthopedic and dental implants, especially in the immediate implant treatment with an infected socket.
- 8 October 2020
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 8, 573464
Open AccessAntibacterial and Osteogenic Functionalization of Titanium With Silicon/Copper-Doped High-Energy Shot Peening-Assisted Micro-Arc Oxidation Technique
Antibacterial and osteogenic functionalization of titanium (Ti) implants will greatly expand their clinical indications in immediate implant therapy, accelerate osteointegration, and enhance long-term prognosis. We had recently shown that the high-energy shot peening (HESP)-assisted micro-arc oxidation (MAO) significantly improved the bioactivity and coating stability of Ti-based substrates. In this study, we further functionalized Ti with antibacterial and osteogenic properties by doping silicon (Si) and/or copper (Cu) ions into HESP/MAO-treated coatings. Physicochemical characterization displayed that the doping of Si and Cu in HESP/MAO-treated coatings (Si/Cu-MAO) did not significantly change their surface topography, roughness, crystal structure, coating thickness, bonding strength, and wettability. The results of X-ray photoelectron spectroscopy (XPS) showed that Si and Cu in the Si/Cu-MAO coating was in the form of silicate radical (SiO32–) and bivalent copper (Cu2+), respectively. The total amounts of Si and Cu were about 13.5 and 5.8 μg/cm2, which released about 33.2 and 31.3% within 14 day, respectively. Compared with the control group (MAO), Si doping samples (MAO-Si) significantly increased the cell viability, alkaline phosphatase (ALP) activity, mineralization and osteogenic genes (ALP, collagen I and osteocalcin) expression of MC3T3-E1 cells. Furthermore, the addition of Cu presented good bactericidal property against both Staphylococcus aureus and Streptococcus mutans (even under the co-culture condition of bacteria and MC3T3-E1 cells): the bacteriostatic rate of both bacteria was over 95%. In conclusion, the novel bioactive Si/Cu-MAO coating with antibacterial and osteogenic properties is a promising functionalization method for orthopedic and dental implants, especially in the immediate implant treatment with an infected socket.