Xiaolin Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xiaolin Yang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Wenlei Li
University of Electronic Science and Technology of China
5 shared publications Xingzhou Cai
Chengdu Micro-Technology Company Ltd., Chengdu, China
5 shared publications- Zhen Fang
University of Electronic Science and Technology of China
5 shared publications Libin Gao
School of Integrated Circuit Science and Engineering, State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu, China
4 shared publications- Hongwei Chen
University of Electronic Science and Technology of China
3 shared publications - Jihua Zhang
University of Electronic Science and Technology of China
3 shared publications
Latest Publications
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 354-358
Tandem Generalized Variational Autoencoder Network for Multisolutions Inverse Design
Inspired by the variational autoencoder (VAE), we propose a novel multi-solutions strategy combined with a tandem neural network for inverse design and optimization problems. In the training, a latent vector $z$ is concatenated to perturb the $S_{11}$ as input to the decoder. Within this framework, a multi-band slotted dipole antenna is employed as an example to validate the feasibility of the proposed network. Experimental results demonstrate that the proposed method not only breaks the one-to-one limitation between inputs and outputs in neural networks to generate diverse solutions, but also significantly accelerates model convergence through the introduction of a tandem architecture, compared with conventional generative adversarial approaches. The network potentially provides an efficient framework for solving inverse problems involving multi-solutions and optimization.
- 28 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 354-358
Tandem Generalized Variational Autoencoder Network for Multisolutions Inverse Design
Inspired by the variational autoencoder (VAE), we propose a novel multi-solutions strategy combined with a tandem neural network for inverse design and optimization problems. In the training, a latent vector $z$ is concatenated to perturb the $S_{11}$ as input to the decoder. Within this framework, a multi-band slotted dipole antenna is employed as an example to validate the feasibility of the proposed network. Experimental results demonstrate that the proposed method not only breaks the one-to-one limitation between inputs and outputs in neural networks to generate diverse solutions, but also significantly accelerates model convergence through the introduction of a tandem architecture, compared with conventional generative adversarial approaches. The network potentially provides an efficient framework for solving inverse problems involving multi-solutions and optimization.
- 1 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3490-3494
SIW-Fed Wideband Millimeter-Wave Filtering Antenna Based on Through-Glass Vias
This paper presents a substrate-integrated-waveguide-fed (SIW-fed) wideband millimeter-wave filtering antenna based on advanced through-glass via (TGV) technology, developed using two stacked glass layers incorporating high-precision metal layers. Glass wafers with thicknesses of 0.23 mm and 0.5 mm are employed to achieve high-density interconnects and precise manufacturing. Utilizing slotted radiating patches, two radiation nulls are first generated on the lower side of the operating band. Additionally, a pair of parasitic patches and parasitic loops are designed to introduce two more radiation nulls, enhancing the suppression level in the stopband. The proposed antenna does not require supplementary filtering circuits and is characterized by a wide bandwidth and low profile. To validate the proposed structure and design concept, a prototype antenna has been designed, fabricated, and measured. It exhibits a −10 dB impedance bandwidth of 31.9–45.9 GHz (35.9%), with measured out-of-band suppression levels exceeding 18.5 dB and 19.1 dB for the lower and upper stopbands, respectively. The measured peak gain is 8.5 dBi at 42.8 GHz.
- 1 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3490-3494
SIW-Fed Wideband Millimeter-Wave Filtering Antenna Based on Through-Glass Vias
This paper presents a substrate-integrated-waveguide-fed (SIW-fed) wideband millimeter-wave filtering antenna based on advanced through-glass via (TGV) technology, developed using two stacked glass layers incorporating high-precision metal layers. Glass wafers with thicknesses of 0.23 mm and 0.5 mm are employed to achieve high-density interconnects and precise manufacturing. Utilizing slotted radiating patches, two radiation nulls are first generated on the lower side of the operating band. Additionally, a pair of parasitic patches and parasitic loops are designed to introduce two more radiation nulls, enhancing the suppression level in the stopband. The proposed antenna does not require supplementary filtering circuits and is characterized by a wide bandwidth and low profile. To validate the proposed structure and design concept, a prototype antenna has been designed, fabricated, and measured. It exhibits a −10 dB impedance bandwidth of 31.9–45.9 GHz (35.9%), with measured out-of-band suppression levels exceeding 18.5 dB and 19.1 dB for the lower and upper stopbands, respectively. The measured peak gain is 8.5 dBi at 42.8 GHz.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 8313-8318
Flex-Form Generative Neural Network for Multifrequency Modes Antennas
This communication introduces a Flex-form Generative Neural Network (FGNN) that is capable of inverse designing the dimensions of a multi-frequency modes antenna, which is implemented with a metallic monopole patch containing variable numbers of slots, based on a target reflection coefficient across 0.3-3 GHz. The FGNN integrates three models: the Forward Prediction Model (FPM) for predicting the antenna’s reflection coefficient S11 based on geometric parameters, i.e., patch and slot dimensions, the Auxiliary Classification Model (ACM) for determining slots count, and finally the Inverse Design Model (IDM) for generating geometric parameters from the desired reflection coefficient. The proposed method enables flexible adjustment of antenna structure by allowing parameters output of indefinite-length. Antenna supporting up to three bands are achieved in this demonstration, with minimal amount of dataset required. The network potentially provides an efficient framework for various electromagnetic structures design with flexible forms of geometry parameters or targets.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 8313-8318
Flex-Form Generative Neural Network for Multifrequency Modes Antennas
This communication introduces a Flex-form Generative Neural Network (FGNN) that is capable of inverse designing the dimensions of a multi-frequency modes antenna, which is implemented with a metallic monopole patch containing variable numbers of slots, based on a target reflection coefficient across 0.3-3 GHz. The FGNN integrates three models: the Forward Prediction Model (FPM) for predicting the antenna’s reflection coefficient S11 based on geometric parameters, i.e., patch and slot dimensions, the Auxiliary Classification Model (ACM) for determining slots count, and finally the Inverse Design Model (IDM) for generating geometric parameters from the desired reflection coefficient. The proposed method enables flexible adjustment of antenna structure by allowing parameters output of indefinite-length. Antenna supporting up to three bands are achieved in this demonstration, with minimal amount of dataset required. The network potentially provides an efficient framework for various electromagnetic structures design with flexible forms of geometry parameters or targets.
- 22 February 2025
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 193
A high-gain, polarization-universal metasurface lens antenna for millimeter-wave communication
- 22 February 2025
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 193
A high-gain, polarization-universal metasurface lens antenna for millimeter-wave communication
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (2) , 1160-1165
Closed-Form Expressions of Parasitic Parameters for Different Sidewall Roughness of Through-Silicon Vias Interconnects
The sidewall roughness of through-silicon vias (TSVs) plays a critical role in the reliability and integrity of signal transmission, particularly at high frequencies. In this study, we introduce a novel approach utilizing generalized closed-form expressions to assess the parasitic RLGC parameters resulting from the sidewall roughness of TSVs under high-frequency conditions. By comparing the calculated results for different sidewall roughness with the outcomes from full-wave electromagnetic (EM) simulations, a high degree of consistency is maintained. Simultaneously, the parasitic parameters showcase systematic variations that correspond to changes in sidewall roughness. Our findings underscore that the adverse impact of TSVs’ parasitic effects becomes more pronounced with heightened sidewall roughness. Importantly, the comparative analysis shows that the correction factor for inductance surpasses that of resistance, underscoring the significance of parasitic inductance. This finding attributes the primary source of parasitic effects to the parasitic inductance resulting from sidewall roughness. In addition, this study meticulously scrutinizes the experimental results, drawing comparisons against both calculated and simulated outcomes, resulting in a good degree of concurrence. This synchronization suggests that the proposed closed-form expressions adeptly capture the nuances of sidewall roughness in TSVs and thus prove highly suitable for scrutinizing a gamut of parasitic effects stemming from sidewall irregularities.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (2) , 1160-1165
Closed-Form Expressions of Parasitic Parameters for Different Sidewall Roughness of Through-Silicon Vias Interconnects
The sidewall roughness of through-silicon vias (TSVs) plays a critical role in the reliability and integrity of signal transmission, particularly at high frequencies. In this study, we introduce a novel approach utilizing generalized closed-form expressions to assess the parasitic RLGC parameters resulting from the sidewall roughness of TSVs under high-frequency conditions. By comparing the calculated results for different sidewall roughness with the outcomes from full-wave electromagnetic (EM) simulations, a high degree of consistency is maintained. Simultaneously, the parasitic parameters showcase systematic variations that correspond to changes in sidewall roughness. Our findings underscore that the adverse impact of TSVs’ parasitic effects becomes more pronounced with heightened sidewall roughness. Importantly, the comparative analysis shows that the correction factor for inductance surpasses that of resistance, underscoring the significance of parasitic inductance. This finding attributes the primary source of parasitic effects to the parasitic inductance resulting from sidewall roughness. In addition, this study meticulously scrutinizes the experimental results, drawing comparisons against both calculated and simulated outcomes, resulting in a good degree of concurrence. This synchronization suggests that the proposed closed-form expressions adeptly capture the nuances of sidewall roughness in TSVs and thus prove highly suitable for scrutinizing a gamut of parasitic effects stemming from sidewall irregularities.
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (7) , 3908-3919
Derivation and Analysis of a Hemispherical Physical Model and the Correction Factors for the Sidewall Roughness of Through-Glass Vias
The sidewall roughness of through-glass vias (TGVs) at high frequencies significantly impacts the integrity and reliability of signal transmissions via the inductance and resistance-correction factors resulting from the combined effect of the skin depth and sidewall roughness. Here, to further investigate the generation and mechanism of the correction factors, a hemispherical physical model of the sidewall roughness of actual TGVs is proposed, and the ${RL}$ model comprising the skin depth and sidewall roughness is derived; the measured results were compared with the causal hemispherical model and the multilevel causal Huray model, and it was verified that the proposed hemispherical model can calculate the ${RL}$ parasitic parameters of TGV with high accuracy. Concurrently, the proposed hemispherical model confirms that the correction factor for internal inductance is larger than that for resistance; it can explore the main source of sidewall-roughness-induced parasitic effects. Moreover, the model offers a solution for reducing the sidewall-roughness-induced parasitic effects.
- 6 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (7) , 3908-3919
Derivation and Analysis of a Hemispherical Physical Model and the Correction Factors for the Sidewall Roughness of Through-Glass Vias
The sidewall roughness of through-glass vias (TGVs) at high frequencies significantly impacts the integrity and reliability of signal transmissions via the inductance and resistance-correction factors resulting from the combined effect of the skin depth and sidewall roughness. Here, to further investigate the generation and mechanism of the correction factors, a hemispherical physical model of the sidewall roughness of actual TGVs is proposed, and the ${RL}$ model comprising the skin depth and sidewall roughness is derived; the measured results were compared with the causal hemispherical model and the multilevel causal Huray model, and it was verified that the proposed hemispherical model can calculate the ${RL}$ parasitic parameters of TGV with high accuracy. Concurrently, the proposed hemispherical model confirms that the correction factor for internal inductance is larger than that for resistance; it can explore the main source of sidewall-roughness-induced parasitic effects. Moreover, the model offers a solution for reducing the sidewall-roughness-induced parasitic effects.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (11) , 1817-1824
Absorptive Filtering Packaging Antenna Design Based on Through-Glass Vias
This paper presents a design of Ka-band absorptive filtering packaging antenna (AFPA) based on Through-Glass Vias (TGVs). Compared to other reflective filtering antennas (RFAs), the AFPA showcases a distinct design featuring dual absorptive band-edge radiation nulls and four reflective stopband radiation nulls. Additionally, the AFPA used a glass multilayer stacked 3-D package scheme that enables good microwave characteristics and high-density interconnects. The radiating patch was composed of an RFA and band-stop filter (BSF) whose reflection coefficients were almost complimentary. The RFA radiating patch and BSF unit were comprised of defect microstrip structure (DMS) and defect ground structure (DGS), corresponding dimensions were λg/4 and λg/2, respectively. The radiating patch layer was connected to the SIW feeding structure layer through a glass transition layer with TGVs and pads, and the packaging process was accomplished using laser bonding. Then we used substrate-integrated waveguide (SIW) operating in Ka-band to feed the AFPA. To validate this design, a prototype of the AFPA was fabricated and measured. The results indicate -10 dB impedance bandwidth ranging from 30 GHz to 35 GHz, with a peak gain of 6.06 dBi and a maximum radiation efficiency of approximately 85%. The measurements reveal that the AFPA has dual absorptive band-edge radiation nulls at 30.9 GHz and 33.5 GHz, and four reflective stopband radiation nulls at 25.9 GHz, 27.3 GHz, 35.1 GHz, and 38.4 GHz, with a suppression level exceeding 15.5 dB.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (11) , 1817-1824
Absorptive Filtering Packaging Antenna Design Based on Through-Glass Vias
This paper presents a design of Ka-band absorptive filtering packaging antenna (AFPA) based on Through-Glass Vias (TGVs). Compared to other reflective filtering antennas (RFAs), the AFPA showcases a distinct design featuring dual absorptive band-edge radiation nulls and four reflective stopband radiation nulls. Additionally, the AFPA used a glass multilayer stacked 3-D package scheme that enables good microwave characteristics and high-density interconnects. The radiating patch was composed of an RFA and band-stop filter (BSF) whose reflection coefficients were almost complimentary. The RFA radiating patch and BSF unit were comprised of defect microstrip structure (DMS) and defect ground structure (DGS), corresponding dimensions were λg/4 and λg/2, respectively. The radiating patch layer was connected to the SIW feeding structure layer through a glass transition layer with TGVs and pads, and the packaging process was accomplished using laser bonding. Then we used substrate-integrated waveguide (SIW) operating in Ka-band to feed the AFPA. To validate this design, a prototype of the AFPA was fabricated and measured. The results indicate -10 dB impedance bandwidth ranging from 30 GHz to 35 GHz, with a peak gain of 6.06 dBi and a maximum radiation efficiency of approximately 85%. The measurements reveal that the AFPA has dual absorptive band-edge radiation nulls at 30.9 GHz and 33.5 GHz, and four reflective stopband radiation nulls at 25.9 GHz, 27.3 GHz, 35.1 GHz, and 38.4 GHz, with a suppression level exceeding 15.5 dB.
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 54-63
Analysis and Optimization of Sidewall Roughness on Microwave Performance of Through-Glass Vias in 3-D Integrated Circuits
The integrity and reliability of signal transmission in glass 3-D integrated circuits (ICs) can be improved by studying the effect of sidewall roughness of through-glass vias (TGVs) on microwave performance. Thus, in this study, the effect of different sidewall roughness of TGVs on the electrical characteristics, such as loss, delay, and impedance correction factors, are analyzed by extracting S-parameters from the CPW-TGVs-CPW model. An accurate RLGC electrical model of TGVs that considers sidewall roughness is proposed. The correction factor of inductance is verified and found to be greater than that of resistance through simulation, physical measurements, and microscopic characterization analysis. Meanwhile, the sidewall roughness was improved by controlling the laser-induced wet etching (LIWE) process of TGVs. It was greatly reduced from 1.257 $\mu $ m to 25 nm. The proposed electrical model is accurately verified below 40 GHz by extracting the electrical parameters of TGVs with different sidewall roughness.
- 9 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (1) , 54-63
Analysis and Optimization of Sidewall Roughness on Microwave Performance of Through-Glass Vias in 3-D Integrated Circuits
The integrity and reliability of signal transmission in glass 3-D integrated circuits (ICs) can be improved by studying the effect of sidewall roughness of through-glass vias (TGVs) on microwave performance. Thus, in this study, the effect of different sidewall roughness of TGVs on the electrical characteristics, such as loss, delay, and impedance correction factors, are analyzed by extracting S-parameters from the CPW-TGVs-CPW model. An accurate RLGC electrical model of TGVs that considers sidewall roughness is proposed. The correction factor of inductance is verified and found to be greater than that of resistance through simulation, physical measurements, and microscopic characterization analysis. Meanwhile, the sidewall roughness was improved by controlling the laser-induced wet etching (LIWE) process of TGVs. It was greatly reduced from 1.257 $\mu $ m to 25 nm. The proposed electrical model is accurately verified below 40 GHz by extracting the electrical parameters of TGVs with different sidewall roughness.
- Open Access
New simulations of the X-ray spectra and polarizations of accretion-disc corona systems with various geometrical configurations I. Model Description
Energetic X-ray radiations emitted from various accretion systems are widely considered to be produced by Comptonization in the hot corona. The corona and its interaction with the disc play an essential role in the evolution of the system and are potentially responsible for many observed features. However many intrinsic properties of the corona are still poorly understood, especially for the geometrical configurations. The traditional spectral fitting method is not powerful enough to distinguish various configurations. In this paper we intent to investigate the possible configurations by modeling the polarization properties of X-ray radiations. The geometries of the corona include the slab, sphere and cylinder. The simulations are implemented through the publicly available code, LEMON, which can deal with the polarized radiative transfer and different electron distributions readily. The results demonstrate clearly that the observed polarizations are dependent on the geometry of the corona heavily. The slab-like corona produces the highest polarization degrees, the following are the cylinder and sphere. One of the interesting things is that the polarization degrees first increase gradually and then decrease with the increase of photon energy. For slab geometry there exists a zero point where the polarization vanishes and the polarization angle rotates for $90^\circ$. These results may potentially be verified by the upcoming missions for polarized X-ray observations, such as $IXPE$ and $eXTP$.Open AccessNew simulations of the X-ray spectra and polarizations of accretion-disc corona systems with various geometrical configurations I. Model Description
Energetic X-ray radiations emitted from various accretion systems are widely considered to be produced by Comptonization in the hot corona. The corona and its interaction with the disc play an essential role in the evolution of the system and are potentially responsible for many observed features. However many intrinsic properties of the corona are still poorly understood, especially for the geometrical configurations. The traditional spectral fitting method is not powerful enough to distinguish various configurations. In this paper we intent to investigate the possible configurations by modeling the polarization properties of X-ray radiations. The geometries of the corona include the slab, sphere and cylinder. The simulations are implemented through the publicly available code, LEMON, which can deal with the polarized radiative transfer and different electron distributions readily. The results demonstrate clearly that the observed polarizations are dependent on the geometry of the corona heavily. The slab-like corona produces the highest polarization degrees, the following are the cylinder and sphere. One of the interesting things is that the polarization degrees first increase gradually and then decrease with the increase of photon energy. For slab geometry there exists a zero point where the polarization vanishes and the polarization angle rotates for $90^\circ$. These results may potentially be verified by the upcoming missions for polarized X-ray observations, such as $IXPE$ and $eXTP$. - Open Access
- 10 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 131663-131671
Compact Frequency Reconfigurable Antennas Based on Composite Right/Left-Handed Transmission Line
The compact reconfigurable antennas based on composite right/left-handed (CRLH) transmission line are proposed and analyzed in this paper. The proposed antenna is fed by the asymmetric coplanar strip (ACPS) and consists of coupling radiation patch as well as a PIN diode. The differences of the antennas with meander line and without meander line are discussed. By utilizing a PIN diode as the CRLH transmission line termination, the termination states can be controlled, and the resonance of the antenna can thus be tuned between the two zeroth-order resonant frequencies. By switching the diode, the antenna with meander line is able to operate in single-band of 2.08-2.54 GHz and dual-bands of 1.65-1.84 GHz and 5.35-6.40 GHz, while the antenna without meander line is able to operation between two single-bands of 1.84-2.28 GHz and 4.6-6.0 GHz. All these operation bands cover the UMTS (1750 MHz-1780 MHz), ISM (2.4 GHz), WIMAX (2.5-2.69 GHz) and WLAN (2.4-2.484 GHz/5.725-5.825 GHz) applications. The radiation performance was simulated by High Frequency Structure Simulator, and the measurements were taken in an anechoic chamber to verify the simulation results. Good agreements are observed between the simulated and measured results. Moreover, the radiation patterns of the proposed antennas remain stable at different reconfigurable bands.
- 10 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 7, 131663-131671
Open AccessCompact Frequency Reconfigurable Antennas Based on Composite Right/Left-Handed Transmission Line
The compact reconfigurable antennas based on composite right/left-handed (CRLH) transmission line are proposed and analyzed in this paper. The proposed antenna is fed by the asymmetric coplanar strip (ACPS) and consists of coupling radiation patch as well as a PIN diode. The differences of the antennas with meander line and without meander line are discussed. By utilizing a PIN diode as the CRLH transmission line termination, the termination states can be controlled, and the resonance of the antenna can thus be tuned between the two zeroth-order resonant frequencies. By switching the diode, the antenna with meander line is able to operate in single-band of 2.08-2.54 GHz and dual-bands of 1.65-1.84 GHz and 5.35-6.40 GHz, while the antenna without meander line is able to operation between two single-bands of 1.84-2.28 GHz and 4.6-6.0 GHz. All these operation bands cover the UMTS (1750 MHz-1780 MHz), ISM (2.4 GHz), WIMAX (2.5-2.69 GHz) and WLAN (2.4-2.484 GHz/5.725-5.825 GHz) applications. The radiation performance was simulated by High Frequency Structure Simulator, and the measurements were taken in an anechoic chamber to verify the simulation results. Good agreements are observed between the simulated and measured results. Moreover, the radiation patterns of the proposed antennas remain stable at different reconfigurable bands.