HKHyun Kim

Hyun Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hyun Kim has a total of 314 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An Automated Flow Platform for the Rapid Synthesis and Degradation of Lipoic-Acid Based Copolymers

    by Seunghyeon Choi, Jeongwoo Han, Chungryong Choi, Jae-Won Ka, Jaebak Kim, Hyun Kim, Yun Ho Kim, Kajal Kajal, Javier Read de Alaniz, Christopher M. Bates, et al.

    Batch photopolymerization is often limited by insufficient light penetration, heat accumulation, and kinetic inhomogeneity, which hinder precise control over polymer structure and scalability. Here, we demonstrate a continuous-flow synthetic platform that integrates photoinduced polymerization and thermally driven degradation within a single system. Using n-butyl acrylate and bioderived α-lipoic acid monomers, statistical copolymers were rapidly synthesized under low light intensity (365 nm, 6 mW/cm2) within 360 s while maintaining quantitative and steady-state conversion over a 100-fold scale-up, achieving a productivity of 1.36 kg/L/h (44 g/day). In-line ultraviolet–visible (UV–vis) monitoring confirmed constant and predictable conversion from a stable radical flux across the residence-time distribution, evidencing homogeneous photon and mass transport even under weak irradiation. Remarkably, the resulting copolymers underwent thermal degradation to oligomers within 4 h, also under continuous-flow conditions, without any catalyst, enabling efficient degradation and reuse. This reversible photothermal flow process highlights the potential of a scalable chemical system that enables polymerization, depolymerization, and repolymerization for the design of dynamic and degradable materials.

  • Open Access

    Waveguided, Self‐Sensing Sheath–Core Liquid Crystal Elastomer Fiber Actuators

    by Hailong Wei, Cheng Zhou, Zhoutao Li, Zhixin Wang, Futing Gao, Yuwei Tian, Sena Chon, Hyun Kim, Ye Xiao, Guanggui Cheng, et al.

    Soft actuators capable of operating in confined and hard‐to‐access environments, while providing integrated self‐sensing capabilities, are highly desired for next‐generation robotic systems. Here we report a waveguided sheath‐core optical fiber actuator consisting of a liquid crystal elastomer core encased in a conductive sheath of carbon nanotubes/carbon black. Near‐infrared light guided through the fiber actuator drives reversible contractions of up to 38% and enables a load‐bearing capacity of up to 320 times the actuator's own weight. Arrays of these fibers enable independent optical addressing of individual actuators, allowing programmable multimodal gripping in confined environments. The conductive sheath simultaneously serves as a strain sensor, providing real‐time monitoring of actuation states via changes in resistance. By integrating photothermal actuation and self‐sensing into a single fiber architecture, this work establishes a multifunctional platform for soft robotic systems operating in spatially confined environments.

  • Post-Functionalized Vinyl-Addition Polynorbornenes as Modular Platforms for Anion Exchange Membranes: Structure–Property Relationships

    by Seungbae Jeon, Eun Woo Lee, Kyulee Jung, Seungjae Lee, Yeongsik Kim, Woohwa Lee, Taehyoung Kim, Hyun Kim, Chang-Geun Chae, Dong-Gyun Kim, et al.

    Fully hydrocarbon-based anion exchange membranes (AEMs) were developed through a facile post-polymerization strategy using vinyl-addition polynorbornene (VA-PNB) backbones. A high-molecular-weight poly(5-vinyl-2-norbornene) (PVNB) precursor was synthesized via chemoselective vinyl-addition polymerization, followed by hydrobromination to introduce tunable brominated functionalities. Subsequent thermal treatment enabled crosslinking through residual vinyl groups without additional crosslinkers. By systematically varying the brominated norbornene content (30–90 mol %), the relationships among ionic composition, crosslinking structure, hydration behavior, mechanical properties, and electrochemical performance were investigated. SAXS and TEM analyses revealed phase-separated ionic aggregates with characteristic d-spacings of approximately 1 nm. Increasing ionic-site density enhanced hydroxide transport but also induced excessive swelling and deterioration of mechanical properties under hydrated conditions. Among the membranes investigated, P(VNB-r-NBQA)50 exhibited a balanced combination of dimensional stability, mechanical properties, and electrochemical performance, showing a low area-specific resistance (0.060 Ω·cm2 at 50 °C) and superior alkaline water electrolysis single-cell performance compared with a commercial FAA membrane. The membrane achieved a current density of 3.06 A/cm2 at 2.0 V and 60 °C, which is approximately 15% higher than that of the commercial FAA membrane (2.66 A/cm2) under identical conditions. Although excessive hydration limited long-term operational stability, this study demonstrates that post-functionalized VA-PNBs provide a versatile platform for designing hydrocarbon-based AEMs and offers important insights into balancing ionic conductivity, swelling behavior, and mechanical stability.

  • Open Access

    Randomly Carboxyl-Functionalized Vinyl-Addition Polynorbornene Dielectric with a Combination of High Dielectric Constant, Wide Bandgap, and High Thermal Stability

    by Linh N. T. Ho, Sungmi Yoo, Woohwa Lee, Dong-Gyun Kim, Sungmin Park, Hyun Kim, Hyun Min Jung, Chang-Geun Chae, Yun Ho Kim, Yong Seok Kim

    We present a randomly carboxyl-functionalized vinyl-addition polynorbornene (VA-PNB) as a polymer dielectric that harmoniously balances a high dielectric constant (Dk), bandgap (Eg), and thermal stability. This polymer was prepared using a post-polymerization modification strategy involving random copolymerization of norbornene and methyl 5-norbornene-2-carboxylate, followed by alkaline hydrolysis. The resulting vinyl-addition poly(norbornene-random-methyl 5-norbornene-2-carboxylate-random-5-norbornene-2-carboxylic acid) (VA-P(NB-r-NBE-r-NBA)) featured a Dk of 3.25 at 1 kHz, Eg of 4.22 eV, and a restrained glass transition temperature up to 350 C. When used as a gate dielectric in a pentacene-based organic field-effect transistor, the Ion/Ioff ratio exceeded 106 without hysteresis. The rigid VA-PNB backbone frame and the intersegmental interactions mediated by carboxylic pendants may have acted synergistically to reduce the trade-off between the high dielectric constant and electrical/thermal stability of the polymer dielectric

  • Open Access

    Synthesis of Poly(4-hydroxystyrene) for Photoresist: Nitroxide-Mediated Polymerization and Homogeneous Acidic Hydrolysis

    by Jinseok Lee, Dong-Gyun Kim, Sungmin Park, Hyun Kim, Woohwa Lee, Jeewoo Lim, Junsu Kim, Du Yeol Ryu, Taehyoung Kim, Chang-Geun Chae

    The growing demand for high-precision chemical materials has intensified the need for stringent control over polymer structures in advanced photolithography. Poly(4-hydroxystyrene) (P(pHS)) is a key base polymer for chemically amplified photoresists. Its narrow molar mass distribution is crucial for minimizing line-edge roughness in photoresist patterns. In this study, we identified the origin of molar mass distribution broadening during the conversion of precursor polymers synthesized by nitroxide-mediated polymerization (NMP) into P(pHS) and established a homogeneous acidic hydrolysis method to suppress it. NMP using N-tert-butyl-N-(2-methyl-1-phenylpropyl)-O-(1-phenylethyl)hydroxylamine (PhEt-TIPNO) afforded TIPNO-terminated poly(4-acetoxystyrene) and poly(4-tert-butoxystyrene) (T-P(pAS) and T-P(pTBS), respectively) with controlled number-average molar masses (Mn) and low dispersities (Đ). During deprotection with hydrochloric acid (HCl), proton-induced C–ON bond cleavage generated carbocationic chain ends, which underwent intermolecular reactions to form branched structures. To minimize these side reactions, a homogeneous organic–aqueous medium was established to facilitate rapid quenching of the carbocations by water. Of the two precursor polymers, T-P(pAS) was more suitable for quantitative deprotection and end-group removal while minimizing branching. This process afforded P(pHS) products with controlled molar masses (Mn = 7.45–21.9 kDa, Đ = 1.08). The same strategy was successfully extended to the synthesis of poly(4-hydroxystyrene-co-styrene) (P(pHS-co-S)) with controlled molar mass and composition (Mn = 6.75 kDa, Đ = 1.07, FpHS = 0.769). The combination of NMP and homogeneous acidic hydrolysis provides an effective strategy for producing well-defined P(pHS)-based materials for photoresist applications.

  • Open Access

    Dynamic Disulfide Ionogels for Self‐Healing, Transparent, and Elastic E‐Skins

    by Min Su Kim, Dong Hyun Park, Jae Yoon Kim, Hyun Kim, Myungwoong Kim, Kyung Gook Cho, Keun Hyung Lee

    Ionogel E‐skins that combine high elasticity, optical transparency, and autonomous self‐healing are highly desirable yet remain challenging to realize owing to the intricate and interdependent physicochemical interactions between polymer networks and ionic liquids. Here, dynamic covalent ionogels, formed by a disulfide–crosslinked tetra‐arm polyethylene glycol network, were systematically engineered by tuning the identity and composition of ionic liquids. We show that polymer–ionic liquid compatibility, viscosity, and ionic liquid content collectively regulate polymer segmental mobility, which governs disulfide exchange kinetics and thereby dictates healing efficiency and elasticity. The optimized ionogel is fully amorphous and exhibits 99% self‐healing at 25°C within 2 h, a low residual strain of 1.7% after a 100% cyclic tensile test, and 93% optical transmittance at 700 nm. As an ionogel electronic skin, it maintains stable sensing under repeated deformation, recovers its initial functionality after complete damage through self‐healing, and enables reliable real‐time strain sensing of the neck, wrist, finger, and knee. These findings establish chain‐mobility engineering as an effective design principle for robust wearable ionogel electronics.

  • Open Access

    Inside Back Cover: Advances in Electroactive Liquid Crystal Elastomers for Intelligent Robotics and Electronics (Adv. Robotics Res. 4/2026)

    by Kavita Ramesh Rathod, Sena Chon, Jae Hyuk Hwang, Sung Hyuk Park, Woohwa Lee, Joonmyung Choi, Shi Hyeong Kim, Seung Hwan Ko, Changsoon Choi, Seon Jeong Kim, et al.

  • Open Access

    Advances in Electroactive Liquid Crystal Elastomers for Intelligent Robotics and Electronics

    by Kavita Ramesh Rathod, Sena Chon, Jae Hyuk Hwang, Sung Hyuk Park, Woohwa Lee, Joonmyung Choi, Shi Hyeong Kim, Seung Hwan Ko, Changsoon Choi, Seon Jeong Kim, et al.

    Electroactive liquid crystal elastomers (eLCEs) represent a rapidly emerging class of intelligent soft materials that integrate molecular anisotropy with electrical functionality. In this review, we classify eLCEs into two major subcategories: (i) robotic actuators, which enable programmable and reversible deformation in response to electrical stimuli, and (ii) adaptive electronics, which realize programmed morphing or functional reconfiguration. By coupling the orientational order of liquid crystals with the elasticity of polymer networks, robotic eLCEs convert electrical energy into mechanical actuation through diverse mechanisms, including electrothermal, electromechanical, electrostatic, and electrochemical pathways. In addition, electronic eLCEs primarily function as morphing substrates capable of controlled shape transformation, enabling reconfigurable electronic systems such as stretchable conductors, sensing antennas, and neural interfaces. To guide the field, this review provides an overview of activation mechanisms in eLCEs, followed by representative robotic and electronic applications with an emphasis on fabrication strategies that bridge material‐level advances toward next‐generation intelligent devices. Collectively, these advances highlight the significant potential of eLCEs for future soft robotics, adaptive electronics, and dynamic interface systems.


  • Postpolymerization N -Alkylamide Functionalization of Vinyl-Addition Polynorbornene Derivatives for Interchain Hydrogen-Bonding Interactions

    by Jun Woo Park, Taehyoung Kim, Linh N. T. Ho, Kyulee Jung, Dong-Gyun Kim, Sungmin Park, Hyun Kim, Woohwa Lee, Woo-Dong Jang, Yong Seok Kim, et al.


  • Open Access

    Photopatternable Composite Conductors Based on Liquid Metal Particles with High Conductivity and Resolution

    by Jeonghee Hwang, Ji Hyun Kim, Ki Woong Kim, Pyeonggeun Jeong, Yejin Jo, Dong Young Kim, Taesu Kim, Sungmook Jung, Sunho Jeong, Hyun Kim, et al.

    Liquid metals (LMs) have garnered significant attention as stretchable conductors for flexible and wearable electronics. However, their practical implementation remains challenging due to difficulties in patterning LMs into precise geometries, thereby limiting their integration into complex devices. Here, we report a photopatternable stretchable conductor based on liquid metal particles (LMPs) that addresses this limitation. The composite conductor consists of LMPs and a photopatternable polymer, enabling direct patterning through conventional photolithography. After chemical etching of the oxide layer on LMPs, the composite achieved a high electrical conductivity of 2.0 × 104 S/cm. Moreover, transfer processing onto PDMS produced conductor‐embedded films with excellent electromechanical durability and thermal stability. The composite patterns further enabled device integration, including Joule heating at low input voltages and voltage‐controlled electrothermal actuation with a thermo‐responsive liquid crystalline elastomers (LCEs). This work establishes a versatile and scalable materials platform for next‐generation stretchable, foldable, and multifunctional electronic systems.