Rodrigo Zanella
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rodrigo Zanella has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Andrei Daniel Zdziarski
Universidade Tecnológica Federal do Paraná, Brazil
5 shared publications - Giovani Benin
Universidade Tecnológica Federal do Paraná, Brazil
5 shared publications - Daniela Meira
Centro de Ensino Superior Riograndense, Brazil
3 shared publications - Leomar Guilherme Woyann
Universidade Tecnológica Federal do Paraná, Brazil
2 shared publications - Lucas Leite Colonelli
Universidade Tecnológica Federal do Paraná, Brazil
2 shared publications - Paulo Henrique de Oliveira
UTFPR
2 shared publications
Latest Publications
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 57
Yield potential of modern soybean cultivars under high and low input levels
The objective of this work was to evaluate the grain yield potential of modern soybean (Glycine max) cultivars subjected to high- and low-input management levels on different sowing dates, in the southwestern region of the state of Paraná, Brazil. The experiment was carried out in the 2017/2018 and 2018/2019 crop seasons in the municipality of Itapejara D’Oeste. Five soybean cultivars (BMX Zeus IPRO, BMX Ativa RR, BMX Lança IPRO, NS 5445 IPRO, and NA 5909 RG) were evaluated in four environments formed by the combination of input management levels (high and low) and sowing dates (first and second). The experimental design was a randomized complete block with three replicates. The evaluated traits were: grain yield potential (kg ha-1), in the R5 phenological stage; and grain yield (kg ha-1) and its components, in the R8 stage. Cultivar, sowing date, and input management are determinant for maximizing grain yield potential. In the first sowing date, in October, the BMX Zeus IPRO cultivar shows a better response to the high level management, with a higher yield potential in the R5 stage (19,682 kg ha-1) and a higher grain yield (8,248 kg ha-1), whereas NA 5909 RG shows the best results with the low input management.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 57
Open AccessYield potential of modern soybean cultivars under high and low input levels
The objective of this work was to evaluate the grain yield potential of modern soybean (Glycine max) cultivars subjected to high- and low-input management levels on different sowing dates, in the southwestern region of the state of Paraná, Brazil. The experiment was carried out in the 2017/2018 and 2018/2019 crop seasons in the municipality of Itapejara D’Oeste. Five soybean cultivars (BMX Zeus IPRO, BMX Ativa RR, BMX Lança IPRO, NS 5445 IPRO, and NA 5909 RG) were evaluated in four environments formed by the combination of input management levels (high and low) and sowing dates (first and second). The experimental design was a randomized complete block with three replicates. The evaluated traits were: grain yield potential (kg ha-1), in the R5 phenological stage; and grain yield (kg ha-1) and its components, in the R8 stage. Cultivar, sowing date, and input management are determinant for maximizing grain yield potential. In the first sowing date, in October, the BMX Zeus IPRO cultivar shows a better response to the high level management, with a higher yield potential in the R5 stage (19,682 kg ha-1) and a higher grain yield (8,248 kg ha-1), whereas NA 5909 RG shows the best results with the low input management.
- Open Access
- 7 April 2020
- Published by Universidade Estadual de Londrina in Semina: Ciências Agrárias
- Vol. 41 (3) , 767-782
Key locations for soybean genotype assessment in South Brazil region
Mitigating the high costs of soybean breeding programs requires constant improvement of all the involved processes. Identifying representative and discriminating test locations, as well as excluding redundant and/or non-representative locations, makes it possible to select genotypes with more accuracy while reducing the costs of the multi-environment trials (MET). Therefore, this study had three objectives: to evaluate the representativeness and discriminating power of test locations; to identify similar test locations for each Edaphoclimatic Region (ECR) and locations that did not contribute to genotype evaluation; and to recommend the best locations for evaluating MET in order to reduce breeding program costs in the soybean macro regions 1 (M1) and 2 (M2). Grain yield (GY) data from ‘Value-for-Cultivation-and-Use’ (VCU) trials obtained during the 2012-2016 crop seasons were used, totaling 132 environments (location x year) and 43 genotypes. The experiments were arranged in a randomized complete block design with three replications. Representative and discriminant locations were identified by GGL (genotype main effects plus genotype × location interaction) + GGE (genotype main effects plus genotype × environment interaction) analysis, using GGEbiplot software. Representative and discriminant locations were identified for each ECR and can be used as core locations for breeding programs. Similarly, locations that were not representative and discriminant, or that present redundancy in the results, should be excluded from or replaced in MET. The most recommended locations for conducting VCU trials in M1 are: Cachoeira do Sul (ECR 101); Ronda Alta, Passo Fundo, Santa Bárbara do Sul, and Ciríaco (ECR 102); and Castro (ECR 103). For M2, the most suitable locations are Rolândia, Marechal Cândido Rondon, Campo Mourão, Santa Terezinha de Itaipu, Palotina, Floresta, and Londrina (ECR 201); Naviraí (ECR 202); and Ponta Porã and Maracajú (ECR 204).
- 7 April 2020
- Published by Universidade Estadual de Londrina in Semina: Ciências Agrárias
- Vol. 41 (3) , 767-782
Open AccessKey locations for soybean genotype assessment in South Brazil region
Mitigating the high costs of soybean breeding programs requires constant improvement of all the involved processes. Identifying representative and discriminating test locations, as well as excluding redundant and/or non-representative locations, makes it possible to select genotypes with more accuracy while reducing the costs of the multi-environment trials (MET). Therefore, this study had three objectives: to evaluate the representativeness and discriminating power of test locations; to identify similar test locations for each Edaphoclimatic Region (ECR) and locations that did not contribute to genotype evaluation; and to recommend the best locations for evaluating MET in order to reduce breeding program costs in the soybean macro regions 1 (M1) and 2 (M2). Grain yield (GY) data from ‘Value-for-Cultivation-and-Use’ (VCU) trials obtained during the 2012-2016 crop seasons were used, totaling 132 environments (location x year) and 43 genotypes. The experiments were arranged in a randomized complete block design with three replications. Representative and discriminant locations were identified by GGL (genotype main effects plus genotype × location interaction) + GGE (genotype main effects plus genotype × environment interaction) analysis, using GGEbiplot software. Representative and discriminant locations were identified for each ECR and can be used as core locations for breeding programs. Similarly, locations that were not representative and discriminant, or that present redundancy in the results, should be excluded from or replaced in MET. The most recommended locations for conducting VCU trials in M1 are: Cachoeira do Sul (ECR 101); Ronda Alta, Passo Fundo, Santa Bárbara do Sul, and Ciríaco (ECR 102); and Castro (ECR 103). For M2, the most suitable locations are Rolândia, Marechal Cândido Rondon, Campo Mourão, Santa Terezinha de Itaipu, Palotina, Floresta, and Londrina (ECR 201); Naviraí (ECR 202); and Ponta Porã and Maracajú (ECR 204).
- Open Access
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 63 (spe)
System Fertilization: a Viable Practice for Black Oat-soybean Crop
System fertilization is characterized by partial or total fertilizer application at the predecessor crop; and it can be a viable practice to soybean crop. This study aimed to determine the fertilizer management and fertilizer levels for black oat-soybean cropping system, in high fertility soils and no-tillage system. The field trial was conducted in a bifactorial scheme, consisting of six environments, by combination of locations (Bom Sucesso do Sul - Paraná, Itapejara d'Oeste - Paraná) and fertilization management (all fertilization in black oat; splitting with 50% in black oat and 50% in soybean, all fertilization in soybean), and four fertilizer levels (0, 100, 200 and 300%) defined according to soil analysis and production expected. The evaluated traits were dry mass production, N, P and K nutrient accumulation of straw, dry mass remaining of black oat crop; and plant height, number of pods per plant, thousand grain weight, grain yield for soybean crop. Higher black oat dry mass production was observed at higher fertilization level. The fertilizer anticipation in black oat crop had better performance. Phosphorus and potassium accumulation increased linearly with fertilizer level increase. For N, the highest accumulated value occurred at the 200%, decreasing at the 300% of fertilizer level. The soybean crop had no influence in grain yield considering fertilization management, anticipation or splitting, and fertilizer levels. Thus, the system fertilization can be a viable practice, and favor black oat dry mass production and soybean development.
- 1 January 2020
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 63 (spe)
Open AccessSystem Fertilization: a Viable Practice for Black Oat-soybean Crop
System fertilization is characterized by partial or total fertilizer application at the predecessor crop; and it can be a viable practice to soybean crop. This study aimed to determine the fertilizer management and fertilizer levels for black oat-soybean cropping system, in high fertility soils and no-tillage system. The field trial was conducted in a bifactorial scheme, consisting of six environments, by combination of locations (Bom Sucesso do Sul - Paraná, Itapejara d'Oeste - Paraná) and fertilization management (all fertilization in black oat; splitting with 50% in black oat and 50% in soybean, all fertilization in soybean), and four fertilizer levels (0, 100, 200 and 300%) defined according to soil analysis and production expected. The evaluated traits were dry mass production, N, P and K nutrient accumulation of straw, dry mass remaining of black oat crop; and plant height, number of pods per plant, thousand grain weight, grain yield for soybean crop. Higher black oat dry mass production was observed at higher fertilization level. The fertilizer anticipation in black oat crop had better performance. Phosphorus and potassium accumulation increased linearly with fertilizer level increase. For N, the highest accumulated value occurred at the 200%, decreasing at the 300% of fertilizer level. The soybean crop had no influence in grain yield considering fertilization management, anticipation or splitting, and fertilizer levels. Thus, the system fertilization can be a viable practice, and favor black oat dry mass production and soybean development.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 54
Identification of core locations for soybean breeding in Southern Brazil
The objective of this work was to identify core locations in two soybean macroregions in Brazil for the evaluation and selection of soybean (Glycine max) lineages. Twenty-two cultivars were tested in 23 locations in these two macroregions (MR1 and MR2), during four years, from 2012 to 2015. Trials were conducted in a randomized complete block design with three replicates. All analyses were performed using the GGEbiplot software. The genotype main effects plus genotype × location interaction + genotype main effects plus genotype × environment interaction and genotypic effect vs. genotype x environment effect analyses were used to identify core locations, i.e., locations with high representativeness and consistency of results. Chapada, in the state of Rio Grande do Sul, and Maracaju, in the state of Mato Grosso do Sul, were the core locations in MR1 and MR2, respectively. These locations were the most representative and consistent over the years, and the genotypic effect explained a high proportion of phenotypic variance.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Brasileira
- Vol. 54
Open AccessIdentification of core locations for soybean breeding in Southern Brazil
The objective of this work was to identify core locations in two soybean macroregions in Brazil for the evaluation and selection of soybean (Glycine max) lineages. Twenty-two cultivars were tested in 23 locations in these two macroregions (MR1 and MR2), during four years, from 2012 to 2015. Trials were conducted in a randomized complete block design with three replicates. All analyses were performed using the GGEbiplot software. The genotype main effects plus genotype × location interaction + genotype main effects plus genotype × environment interaction and genotypic effect vs. genotype x environment effect analyses were used to identify core locations, i.e., locations with high representativeness and consistency of results. Chapada, in the state of Rio Grande do Sul, and Maracaju, in the state of Mato Grosso do Sul, were the core locations in MR1 and MR2, respectively. These locations were the most representative and consistent over the years, and the genotypic effect explained a high proportion of phenotypic variance.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Tropical
- Vol. 49
Performance of common bean genotypes as a function of growing seasons and technological input levels1
In Brazil, common bean (Phaseolus vulgaris L.) is cultivated in different growing seasons and environments, with different genotypes responses due to the genotype x environment interaction. This study aimed to identify common bean genotypes with a better production stability in each growing environment. The trials were conducted in a randomized block design, with three replications, involving three growing years, nine common bean genotypes and four environments (first and second growing seasons with high and low levels of technological input, such as fertilizers and pest and disease control). Biplot analyses were performed using the GGE Biplot software. The use of high levels of technological input results in an average increase of 14.4 % for yield and is more representative in the crop environments, as well as more adequate for genotype selection. IPR Campos Gerais, BRS Esplendor and BRS Campeiro showed a high stability and presented the best productive performance under both technological levels.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Pesquisa Agropecuária Tropical
- Vol. 49
Open AccessPerformance of common bean genotypes as a function of growing seasons and technological input levels1
In Brazil, common bean (Phaseolus vulgaris L.) is cultivated in different growing seasons and environments, with different genotypes responses due to the genotype x environment interaction. This study aimed to identify common bean genotypes with a better production stability in each growing environment. The trials were conducted in a randomized block design, with three replications, involving three growing years, nine common bean genotypes and four environments (first and second growing seasons with high and low levels of technological input, such as fertilizers and pest and disease control). Biplot analyses were performed using the GGE Biplot software. The use of high levels of technological input results in an average increase of 14.4 % for yield and is more representative in the crop environments, as well as more adequate for genotype selection. IPR Campos Gerais, BRS Esplendor and BRS Campeiro showed a high stability and presented the best productive performance under both technological levels.