Dezhao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Dezhao Liu has a total of 211 co-authors. Here are the top co-authors by number of shared publications:
- Anders Feilberg
Department of Biosystems Engineering, Aarhus University, Blichers Allé 20, DK-8830 Tjele, Denmark
16 shared publications Changwei Li
School of Agricultural Engineering, Jiangsu University, Zhenjiang 212013, China; UNSW Water Research Centre, School of Civil and Environmental Engineering, UNSW Sydney, NSW 2052, Australia; Institute of Agricultural Bio-Environmental Engineering, College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou 310058, China
10 shared publicationsSongming Zhu
Key Laboratory of Equipment and Informatization in Environment Controlled Agriculture from Ministry of Agriculture and Rural Affairs of China, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Institute of Agri-biological Environment Engineering, Zhejiang University, Hangzhou, 310058, China
9 shared publications- Songming Zhu
College of Bio-systems Engineering and Food Science, Zhejiang University, Hangzhou 310058, China
9 shared publications Xianwang Kong
Institute of Agricultural Bio-Environmental Engineering, College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou 310058, China; Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control, School of Petrochemical Engineering & Environment, Zhejiang Ocean University, Zhoushan 316004, China
9 shared publicationsZhangying Ye
Institute of Agricultural Bio-Environmental Engineering, College of Biosystems Engineering and Food Science, Zhejiang University, Hangzhou, China
7 shared publications
Latest Publications
- Open Access
Medium C/N with Low Aeration for Enhanced Aerobic Denitrifying MBBRs Start-Up Treating Mariculture Wastewater
The Moving Bed Biofilm Reactor (MBBR) is commonly used for NH4+-N removal from seawater recirculating aquaculture systems (RASs), while total nitrogen (TN) reduction is increasingly required. Aerobic denitrification offers a potential solution for simultaneous TN and NH4+-N removal, but rapid reactor start-up remains challenging. This study investigated the start-up of aerobic denitrifying MBBRs treating mariculture wastewater. Eight MBBRs were operated at 25 °C with four C/N ratios (5.5, 4.5, 3.5, and 0) and two aeration rates (1.0 and 0.4 L/min). Only the CN4.5-0.4 MBBR met the predefined start-up criteria, achieving start-up in 26 days with an NH4+-N removal efficiency of 93.8%. Effluent NH4+-N and NO2−-N remained below 0.5 mg/L without NO3−-N accumulation. External carbon addition was essential, but excessive carbon did not accelerate start-up; CN3.5 MBBRs showed slower and less stable NH4+-N removal, whereas CN5.5 MBBRs showed higher NO3−-N removal but still accumulated NO2−-N. Low aeration increased the average NO3−-N removal efficiency at C/N = 5.5 from 39.0% to 66.2%. Microbial community analysis identified Pseudomonas, Vitellibacter, and Paracoccus as the dominant nitrogen-removing genera, with a combined relative abundance of 41.0% in the CN4.5-0.4 MBBR. Metagenomic sequencing identified genes associated with multiple nitrogen-transformation pathways and supported the potential for aerobic denitrification.
Open AccessMedium C/N with Low Aeration for Enhanced Aerobic Denitrifying MBBRs Start-Up Treating Mariculture Wastewater
The Moving Bed Biofilm Reactor (MBBR) is commonly used for NH4+-N removal from seawater recirculating aquaculture systems (RASs), while total nitrogen (TN) reduction is increasingly required. Aerobic denitrification offers a potential solution for simultaneous TN and NH4+-N removal, but rapid reactor start-up remains challenging. This study investigated the start-up of aerobic denitrifying MBBRs treating mariculture wastewater. Eight MBBRs were operated at 25 °C with four C/N ratios (5.5, 4.5, 3.5, and 0) and two aeration rates (1.0 and 0.4 L/min). Only the CN4.5-0.4 MBBR met the predefined start-up criteria, achieving start-up in 26 days with an NH4+-N removal efficiency of 93.8%. Effluent NH4+-N and NO2−-N remained below 0.5 mg/L without NO3−-N accumulation. External carbon addition was essential, but excessive carbon did not accelerate start-up; CN3.5 MBBRs showed slower and less stable NH4+-N removal, whereas CN5.5 MBBRs showed higher NO3−-N removal but still accumulated NO2−-N. Low aeration increased the average NO3−-N removal efficiency at C/N = 5.5 from 39.0% to 66.2%. Microbial community analysis identified Pseudomonas, Vitellibacter, and Paracoccus as the dominant nitrogen-removing genera, with a combined relative abundance of 41.0% in the CN4.5-0.4 MBBR. Metagenomic sequencing identified genes associated with multiple nitrogen-transformation pathways and supported the potential for aerobic denitrification.
- 28 August 2026
- Published by Wiley in Water and Environment Journal
Leveraging Supervised Machine Learning Algorithms in Predicting Contaminants Removal From Novel Cascade Aerating Trickling Filter
This research evaluated machine learning (ML) algorithms to predict the efficiency of a cascade aerating trickling filter (CATF) in removing physicochemical characteristics such as suspended solids (SS), biological oxygen demand (BOD) and chemical oxygen demand (COD). The pre‐evaluation of characteristics' data demonstrated that CATF is effective in removing TSS, BOD and COD. Four ML algorithms, that is, random forest (RF), Gaussian process regression (GPR), extreme gradient boosting (XGB) and light gradient boosting machine (LightGBM), were assessed for physicochemical prediction of the CATF. The appraisal of the ML algorithms revealed that RF outperformed the others in predicting 81% SS and 84% COD removal. Nevertheless, GPR was found to be superior, with 66% accuracy in detecting CATF's BOD performance. Ensemble ML algorithms, such as RF and GPR, are recommended as effective solutions for optimizing the performance of wastewater treatment plants.
- 28 August 2026
- Published by Wiley in Water and Environment Journal
Leveraging Supervised Machine Learning Algorithms in Predicting Contaminants Removal From Novel Cascade Aerating Trickling Filter
This research evaluated machine learning (ML) algorithms to predict the efficiency of a cascade aerating trickling filter (CATF) in removing physicochemical characteristics such as suspended solids (SS), biological oxygen demand (BOD) and chemical oxygen demand (COD). The pre‐evaluation of characteristics' data demonstrated that CATF is effective in removing TSS, BOD and COD. Four ML algorithms, that is, random forest (RF), Gaussian process regression (GPR), extreme gradient boosting (XGB) and light gradient boosting machine (LightGBM), were assessed for physicochemical prediction of the CATF. The appraisal of the ML algorithms revealed that RF outperformed the others in predicting 81% SS and 84% COD removal. Nevertheless, GPR was found to be superior, with 66% accuracy in detecting CATF's BOD performance. Ensemble ML algorithms, such as RF and GPR, are recommended as effective solutions for optimizing the performance of wastewater treatment plants.
- Open Access
- 28 August 2026
- Published by MDPI AG in Preprints.org
Medium C/N with Low Aeration for Enhanced Aerobic Denitrifying MBBRs Start-Up Treating Mariculture Wastewater
The Moving Bed Biofilm Reactor (MBBR) is commonly used for NH₄⁺-N removal from seawater recirculating aquaculture systems (RAS), while total nitrogen (TN) reduction is increasingly required. Aerobic denitrification offers a potential solution for simultaneous TN and NH₄⁺-N removal, but rapid reactor start-up remains challenging. This study investigated the start-up of aerobic denitrifying MBBRs treating mariculture wastewater. Eight MBBRs were operated at 25 ℃ with four C/N ratios (5.5, 4.5, 3.5, and 0) and two aeration rates (1.0 and 0.4 L/min). Only the CN4.5-0.4 MBBR met the predefined start-up criteria, achieving start-up in 26 days with an NH₄⁺-N removal efficiency of 93.8%. Effluent NH₄⁺-N and NO₂⁻-N remained below 0.5 mg/L without NO₃⁻-N accumulation. External carbon addition was essential, but excessive carbon did not accelerate start-up; CN3.5 MBBRs showed slower and less stable NH₄⁺-N removal, whereas CN5.5 MBBRs showed higher NO₃⁻-N removal but still accumulated NO₂⁻-N. Low aeration increased the average NO₃⁻-N removal efficiency at C/N = 5.5 from 39.0% to 66.2%. Microbial community analysis identified Pseudomonas, Vitellibacter, and Paracoccus as the dominant nitrogen-removing genera, with a combined relative abundance of 41.0% in the CN4.5-0.4 MBBR. Metagenomic sequencing identified genes associated with multiple nitrogen-transformation pathways and supported the potential for aerobic denitrification.
- 28 August 2026
- Published by MDPI AG in Preprints.org
Open AccessMedium C/N with Low Aeration for Enhanced Aerobic Denitrifying MBBRs Start-Up Treating Mariculture Wastewater
The Moving Bed Biofilm Reactor (MBBR) is commonly used for NH₄⁺-N removal from seawater recirculating aquaculture systems (RAS), while total nitrogen (TN) reduction is increasingly required. Aerobic denitrification offers a potential solution for simultaneous TN and NH₄⁺-N removal, but rapid reactor start-up remains challenging. This study investigated the start-up of aerobic denitrifying MBBRs treating mariculture wastewater. Eight MBBRs were operated at 25 ℃ with four C/N ratios (5.5, 4.5, 3.5, and 0) and two aeration rates (1.0 and 0.4 L/min). Only the CN4.5-0.4 MBBR met the predefined start-up criteria, achieving start-up in 26 days with an NH₄⁺-N removal efficiency of 93.8%. Effluent NH₄⁺-N and NO₂⁻-N remained below 0.5 mg/L without NO₃⁻-N accumulation. External carbon addition was essential, but excessive carbon did not accelerate start-up; CN3.5 MBBRs showed slower and less stable NH₄⁺-N removal, whereas CN5.5 MBBRs showed higher NO₃⁻-N removal but still accumulated NO₂⁻-N. Low aeration increased the average NO₃⁻-N removal efficiency at C/N = 5.5 from 39.0% to 66.2%. Microbial community analysis identified Pseudomonas, Vitellibacter, and Paracoccus as the dominant nitrogen-removing genera, with a combined relative abundance of 41.0% in the CN4.5-0.4 MBBR. Metagenomic sequencing identified genes associated with multiple nitrogen-transformation pathways and supported the potential for aerobic denitrification.
- Open Access
Sustainable Recirculating Aquaculture Systems (RAS): Development and Challenges
The recirculating aquaculture system (RAS) marks a significant shift in global aquaculture, transitioning to controlled, land-based production. This review highlights technological advancements that enable the treatment and reuse of over 90% of water, thereby enhancing water quality and production efficiency. These features position RAS as a cornerstone of sustainable seafood production. This review introduces the RAS Readiness Level (RRL) framework which is a novel, structured approach to assess the commercial maturity of emerging RAS technologies. Applying the RRL to six key technological domains (from digital AI systems to biological PHB recovery) reveals a pervasive pilot-scale purgatory where most innovations stagnate at RRL 4–6. It further addresses advanced processes such as membrane bioreactors, denitrification reactors, and the conversion of waste into valuable products. Furthermore, this review addresses persistent challenges, including high energy demand, economic viability, and the accumulation of pathogens. Finally, it focuses on the emergent integration of the Internet of Things (IoT) and artificial intelligence (AI), which are revolutionizing RAS management through data-driven optimization. By synthesizing current innovations, this review envisions a future of intelligent, closed-loop RAS where advanced IoT- and AI-driven technologies optimize water quality and feeding strategies to minimize ecological impact while enhancing sustainability and productivity.
Open AccessSustainable Recirculating Aquaculture Systems (RAS): Development and Challenges
The recirculating aquaculture system (RAS) marks a significant shift in global aquaculture, transitioning to controlled, land-based production. This review highlights technological advancements that enable the treatment and reuse of over 90% of water, thereby enhancing water quality and production efficiency. These features position RAS as a cornerstone of sustainable seafood production. This review introduces the RAS Readiness Level (RRL) framework which is a novel, structured approach to assess the commercial maturity of emerging RAS technologies. Applying the RRL to six key technological domains (from digital AI systems to biological PHB recovery) reveals a pervasive pilot-scale purgatory where most innovations stagnate at RRL 4–6. It further addresses advanced processes such as membrane bioreactors, denitrification reactors, and the conversion of waste into valuable products. Furthermore, this review addresses persistent challenges, including high energy demand, economic viability, and the accumulation of pathogens. Finally, it focuses on the emergent integration of the Internet of Things (IoT) and artificial intelligence (AI), which are revolutionizing RAS management through data-driven optimization. By synthesizing current innovations, this review envisions a future of intelligent, closed-loop RAS where advanced IoT- and AI-driven technologies optimize water quality and feeding strategies to minimize ecological impact while enhancing sustainability and productivity.
- 1 January 2026
- Published by China Engineering Science Press Co. Ltd. in ENGINEERING Agriculture
- Vol. 13 (4)
Field slurry application in northeastern China for reducing greenhouse gases and ammonia emission
- 1 January 2026
- Published by China Engineering Science Press Co. Ltd. in ENGINEERING Agriculture
- Vol. 13 (4)
Field slurry application in northeastern China for reducing greenhouse gases and ammonia emission
- 1 October 2025
- Published by Elsevier in Water Research
- Vol. 288 (Pt B) , 124708
Electrochemical ammonia recovery from wastewater: The critical roles of electrode engineering toward scale-up
- 1 October 2025
- Published by Elsevier in Water Research
- Vol. 288 (Pt B) , 124708
Electrochemical ammonia recovery from wastewater: The critical roles of electrode engineering toward scale-up
- Open Access
- 31 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9610
Start-Up Strategies of MBBR and Effects on Nitrification and Microbial Communities in Low-Temperature Marine RAS
The rapid development of marine recirculating aquaculture systems (RASs) worldwide offers an efficient and sustainable approach to aquaculture. However, the slow start-up of the nitrification process under low-temperature conditions remains a significant challenge. This study evaluated multiple start-up strategies for moving bed biofilm reactors (MBBRs) operating at 13–15 °C. Among them, the salinity-gradient (SG) strategy exhibited the best performance, reducing the start-up time by 38 days compared to the control, with microbial richness (Chao1 index) reaching 396 and diversity (Shannon index) of 4.89. Inoculation with mature biofilm (MBI) also showed excellent results, shortening the start-up period by 26 days and achieving a stable total ammonia nitrogen (TAN) effluent concentration below 0.5 mg/L within 132 days. MBI exhibited the highest microbial richness (Chao1 index = 808) and diversity (Shannon index = 5.55), significantly higher than those of the control (Chao1 index = 279, Shannon index = 3.90) and other treatments. The hydraulic retention time-gradient (HRT) strategy contributed to performance improvement as well, with a 24-day reduction in start-up time and a Chao1 index of 663 and a Shannon index is 4.69. In contrast, nitrifying bacteria addition (NBA) and carrier adhesion layer modification (CALM) had limited effects on start-up efficiency or microbial diversity, with Chao1 indices of only 255 and 228, and Shannon indices were both 3.24, respectively. Overall, the results indicate that salinity acclimation, mature biofilm inoculation, and extended HRT are effective approaches for promoting microbial community adaptation and enhancing MBBR start-up under low-temperature marine conditions.
- 31 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9610
Open AccessStart-Up Strategies of MBBR and Effects on Nitrification and Microbial Communities in Low-Temperature Marine RAS
The rapid development of marine recirculating aquaculture systems (RASs) worldwide offers an efficient and sustainable approach to aquaculture. However, the slow start-up of the nitrification process under low-temperature conditions remains a significant challenge. This study evaluated multiple start-up strategies for moving bed biofilm reactors (MBBRs) operating at 13–15 °C. Among them, the salinity-gradient (SG) strategy exhibited the best performance, reducing the start-up time by 38 days compared to the control, with microbial richness (Chao1 index) reaching 396 and diversity (Shannon index) of 4.89. Inoculation with mature biofilm (MBI) also showed excellent results, shortening the start-up period by 26 days and achieving a stable total ammonia nitrogen (TAN) effluent concentration below 0.5 mg/L within 132 days. MBI exhibited the highest microbial richness (Chao1 index = 808) and diversity (Shannon index = 5.55), significantly higher than those of the control (Chao1 index = 279, Shannon index = 3.90) and other treatments. The hydraulic retention time-gradient (HRT) strategy contributed to performance improvement as well, with a 24-day reduction in start-up time and a Chao1 index of 663 and a Shannon index is 4.69. In contrast, nitrifying bacteria addition (NBA) and carrier adhesion layer modification (CALM) had limited effects on start-up efficiency or microbial diversity, with Chao1 indices of only 255 and 228, and Shannon indices were both 3.24, respectively. Overall, the results indicate that salinity acclimation, mature biofilm inoculation, and extended HRT are effective approaches for promoting microbial community adaptation and enhancing MBBR start-up under low-temperature marine conditions.
- Open Access
Maifanstone Powder-Modified PE Filler for Enhanced MBBR Start-Up in Treating Marine RAS Wastewater
The recirculating aquaculture system (RAS) has been rapidly adopted worldwide in recent years due to its high productivity, good stability, and good environmental controllability (and therefore friendliness to environment and ecology). Nevertheless, the effluent from seawater RAS contains a high level of ammonia nitrogen which is toxic to fish, so it is necessary to overcome the salinity conditions to achieve rapid and efficient nitrification for recycling. The moving bed biofilm reactor (MBBR) has been widely applied often by using PE fillers for efficient wastewater treatment. However, the start-up of MBBR in seawater environments has remained a challenge due to salinity stress and harsh inoculation conditions. This study investigated a new PE-filler surface modification method towards the enhanced start-up of mariculture MBBR by combining liquid-phase oxidation and maifanstone powder. The aim was to obtain a higher porous surface and roughness and a strong adsorption and alkalinity adjustment for the MBBR PE filler. The hydrophilic properties, surface morphology, and chemical structure of a raw polyethylene filler (an unmodified PE filler), liquid-phase oxidation modified filler (LO-PE), and liquid-phase oxidation combined with a coating of a maifanstone-powder-surface-modified filler (LO-SCPE) were first investigated and compared. The results showed that the contact angle was reduced to 45.5° after the optimal liquid-phase oxidation modification for LO-PE, 49.8% lower than that before modification, while SEM showed increased roughness and surface area by modification. Moreover, EDS presented the relative content of carbon (22.75%) and oxygen (42.36%) on the LO-SCPE surface with an O/C ratio of 186.10%, which is 177.7% higher than that of the unmodified filler. The start-up experiment on MBBRs treating simulated marine RAS wastewater (HRT = 24 h) showed that the start-up period was shortened by 10 days for LO-SCPE compared to the PE reactor, with better ammonia nitrogen removal observed for LO-SCPE (95.8%) than the PE reactor (91.7%). Meanwhile, the bacterial community composition showed that the LO-SCPE reactor had a more diverse and abundant AOB and NOB. The Nitrospira has a more significant impact on nitrification because it would directly oxidize NH4⁺-N to NO3⁻-N (comammox pathway) as mediated by AOB and NOB. Further, the LO-SCPE reactor showed a higher NH4+-N removal rate (>99%), less NO2−-N accumulation, and a shorter adaption period than the PE reactor. Eventually, the NH4+-N concentrations of the three reactors (R1, R2, and R3) reached 4+-N removal efficiencies achieved 99.53%, 99.61%, and 99.69%, respectively, under ammonia shock load. Hence, the LO-SCPE media have a higher marine wastewater treatment efficiency.
Open AccessMaifanstone Powder-Modified PE Filler for Enhanced MBBR Start-Up in Treating Marine RAS Wastewater
The recirculating aquaculture system (RAS) has been rapidly adopted worldwide in recent years due to its high productivity, good stability, and good environmental controllability (and therefore friendliness to environment and ecology). Nevertheless, the effluent from seawater RAS contains a high level of ammonia nitrogen which is toxic to fish, so it is necessary to overcome the salinity conditions to achieve rapid and efficient nitrification for recycling. The moving bed biofilm reactor (MBBR) has been widely applied often by using PE fillers for efficient wastewater treatment. However, the start-up of MBBR in seawater environments has remained a challenge due to salinity stress and harsh inoculation conditions. This study investigated a new PE-filler surface modification method towards the enhanced start-up of mariculture MBBR by combining liquid-phase oxidation and maifanstone powder. The aim was to obtain a higher porous surface and roughness and a strong adsorption and alkalinity adjustment for the MBBR PE filler. The hydrophilic properties, surface morphology, and chemical structure of a raw polyethylene filler (an unmodified PE filler), liquid-phase oxidation modified filler (LO-PE), and liquid-phase oxidation combined with a coating of a maifanstone-powder-surface-modified filler (LO-SCPE) were first investigated and compared. The results showed that the contact angle was reduced to 45.5° after the optimal liquid-phase oxidation modification for LO-PE, 49.8% lower than that before modification, while SEM showed increased roughness and surface area by modification. Moreover, EDS presented the relative content of carbon (22.75%) and oxygen (42.36%) on the LO-SCPE surface with an O/C ratio of 186.10%, which is 177.7% higher than that of the unmodified filler. The start-up experiment on MBBRs treating simulated marine RAS wastewater (HRT = 24 h) showed that the start-up period was shortened by 10 days for LO-SCPE compared to the PE reactor, with better ammonia nitrogen removal observed for LO-SCPE (95.8%) than the PE reactor (91.7%). Meanwhile, the bacterial community composition showed that the LO-SCPE reactor had a more diverse and abundant AOB and NOB. The Nitrospira has a more significant impact on nitrification because it would directly oxidize NH4⁺-N to NO3⁻-N (comammox pathway) as mediated by AOB and NOB. Further, the LO-SCPE reactor showed a higher NH4+-N removal rate (>99%), less NO2−-N accumulation, and a shorter adaption period than the PE reactor. Eventually, the NH4+-N concentrations of the three reactors (R1, R2, and R3) reached 4+-N removal efficiencies achieved 99.53%, 99.61%, and 99.69%, respectively, under ammonia shock load. Hence, the LO-SCPE media have a higher marine wastewater treatment efficiency.
- 16 August 2024
- Published by Elsevier in Chemosphere
- Vol. 364, 143126
Enhanced low-concentration phosphate adsorption using magnetic UiO-66@Fe3O4 composite with potential linker exchange
- 16 August 2024
- Published by Elsevier in Chemosphere
- Vol. 364, 143126
Enhanced low-concentration phosphate adsorption using magnetic UiO-66@Fe3O4 composite with potential linker exchange