Wen-Long Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wen-Long Bai has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Kai-Xue Wang
Shanghai Jiao Tong University
5 shared publications Jie-Sheng Chen
Shanghai Electrochemical Energy Devices Research Center
4 shared publicationsQiang Zhang
Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs
2 shared publications- Shumao Xu
Institute of Science and Technology for Brain-inspired Intelligence (ISTBI), Fudan University, Shanghai 200040, China
2 shared publications Xin Chen
Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs
2 shared publicationsXin Liu
Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs
2 shared publications
Latest Publications
- Open Access
- 21 August 2022
- Published by Wiley in Battery Energy
- Vol. 1 (4)
Tuning discrete growth of ultrathin nonstoichiometric Li2−xO2 discs to achieve high cycling performance Li–O2 battery
Li–O2 batteries (LOBs) with high theoretical energy density are regarded as promising next‐generation energy storage devices. However, the electrochemical performance of LOBs is significantly impacted by the sluggish reaction kinetics of the insulative discharge product, Li2O2. It is envisaged that nonstoichiometric lithium peroxide (Li2−xO2) with an increased charge transfer rate would address this issue. Herein, Ketjen black modified by highly stable polyarylimide was employed as the cathode material for LOBs. As revealed by time‐of‐flight secondary ion mass spectrometry and O K‐edge X‐ray absorption near‐edge structure analyses, nonstoichiometric Li2−xO2, primarily composed of LiO2 and Li2O3, is distributed homogeneously within the discharge products. The formation of nonstoichiometric Li2−xO2 is attributed to the strong interaction of the functional group C═O toward Li ions. In addition, the thickness of the discharge product is well controlled to less than 10 nm, providing a shortened charge transport path and increasing the decomposition kinetics. Consequently, ultrahigh cycle stability (>130 cycles) is achieved with a cutoff capacity of 1000 mAh g−1 at a current density of 400 mA g−1. This study provides a novel strategy for the development of sustainable and durable rechargeable LOBs.
- 21 August 2022
- Published by Wiley in Battery Energy
- Vol. 1 (4)
Open AccessTuning discrete growth of ultrathin nonstoichiometric Li2−xO2 discs to achieve high cycling performance Li–O2 battery
Li–O2 batteries (LOBs) with high theoretical energy density are regarded as promising next‐generation energy storage devices. However, the electrochemical performance of LOBs is significantly impacted by the sluggish reaction kinetics of the insulative discharge product, Li2O2. It is envisaged that nonstoichiometric lithium peroxide (Li2−xO2) with an increased charge transfer rate would address this issue. Herein, Ketjen black modified by highly stable polyarylimide was employed as the cathode material for LOBs. As revealed by time‐of‐flight secondary ion mass spectrometry and O K‐edge X‐ray absorption near‐edge structure analyses, nonstoichiometric Li2−xO2, primarily composed of LiO2 and Li2O3, is distributed homogeneously within the discharge products. The formation of nonstoichiometric Li2−xO2 is attributed to the strong interaction of the functional group C═O toward Li ions. In addition, the thickness of the discharge product is well controlled to less than 10 nm, providing a shortened charge transport path and increasing the decomposition kinetics. Consequently, ultrahigh cycle stability (>130 cycles) is achieved with a cutoff capacity of 1000 mAh g−1 at a current density of 400 mA g−1. This study provides a novel strategy for the development of sustainable and durable rechargeable LOBs.
- 26 October 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (12) , 4717-4737
Electrocatalyst design for aprotic Li–CO2 batteries
Recently, a promising energy storage technology, high energy density rechargeable Li–CO2 batteries, has attracted considerable attention. Li–CO2 batteries are anticipated to mitigate the long-lasting greenhouse effect and simultaneously provide electric power. However, inferior battery performance due to large overpotentials, low cyclability and fast capacity degradation, which are mainly triggered by unsatisfactory electrocatalyst design, still bothers materials scientists. This article reviews the pioneering development of cathode catalysts in terms of corresponding intrinsic and extrinsic factors. Intrinsic factors, herein referring to the electronic structures of a substance and its electronic interactions with the environment, dictate the nature of the ‘building units’ of the material and can often be chemically tuned through strategies like heteroatom doping, defect engineering and surface functionalizing or nanocompositing. Extrinsic factors, referring to the physical geometry of materials, including morphology, porosity, size, etc., also require careful reflection since different geometric arrangements of the same ‘building units’ most likely result in entirely different battery performances. A systematic consideration of both the intrinsic and extrinsic factors is believed to further inspire beautiful designs of electrocatalysts for Li–CO2 batteries as well as other metal–air batteries.
- 26 October 2020
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (12) , 4717-4737
Electrocatalyst design for aprotic Li–CO2 batteries
Recently, a promising energy storage technology, high energy density rechargeable Li–CO2 batteries, has attracted considerable attention. Li–CO2 batteries are anticipated to mitigate the long-lasting greenhouse effect and simultaneously provide electric power. However, inferior battery performance due to large overpotentials, low cyclability and fast capacity degradation, which are mainly triggered by unsatisfactory electrocatalyst design, still bothers materials scientists. This article reviews the pioneering development of cathode catalysts in terms of corresponding intrinsic and extrinsic factors. Intrinsic factors, herein referring to the electronic structures of a substance and its electronic interactions with the environment, dictate the nature of the ‘building units’ of the material and can often be chemically tuned through strategies like heteroatom doping, defect engineering and surface functionalizing or nanocompositing. Extrinsic factors, referring to the physical geometry of materials, including morphology, porosity, size, etc., also require careful reflection since different geometric arrangements of the same ‘building units’ most likely result in entirely different battery performances. A systematic consideration of both the intrinsic and extrinsic factors is believed to further inspire beautiful designs of electrocatalysts for Li–CO2 batteries as well as other metal–air batteries.
- 7 September 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (83) , 12566-12569
Phosphazene-derived stable and robust artificial SEI for protecting lithium anodes of Li–O2batteries
A stable artificial solid electrolyte interphase (ASEI) containing Phosphazene and perfluoroalkoxy groups was designed to protect Li anodes. The ASEI with high ionic conductivity and mechanical robustness successfully suppressed the growth of Li dendrites, significantly enhancing the electrochemical performance of the Li–O2 batteries.
- 7 September 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 56 (83) , 12566-12569
Phosphazene-derived stable and robust artificial SEI for protecting lithium anodes of Li–O2batteries
A stable artificial solid electrolyte interphase (ASEI) containing Phosphazene and perfluoroalkoxy groups was designed to protect Li anodes. The ASEI with high ionic conductivity and mechanical robustness successfully suppressed the growth of Li dendrites, significantly enhancing the electrochemical performance of the Li–O2 batteries.
- 28 September 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (42) , 24524-24531
3D ordered macroporous MoO2 attached on carbonized cloth for high performance free-standing binder-free lithium–sulfur electrodes
A free-standing Li–S electrode was fabricated based on the in situ growth of 3DOM MoO2 on carbonized nonwoven cloth. The Li–S electrode with high sulfur loading exhibits superior storage capability and structural robustness.
- 28 September 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (42) , 24524-24531
3D ordered macroporous MoO2 attached on carbonized cloth for high performance free-standing binder-free lithium–sulfur electrodes
A free-standing Li–S electrode was fabricated based on the in situ growth of 3DOM MoO2 on carbonized nonwoven cloth. The Li–S electrode with high sulfur loading exhibits superior storage capability and structural robustness.
- 16 September 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (40) , 23046-23054
Free-standing N,Co-codoped TiO 2 nanoparticles for LiO 2 -based Li–O 2 batteries
N and Co co-doped TiO 2 nanoparticles grown on carbon fibers are employed to facilitate the formation and stabilization of LiO 2 .
- 16 September 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (40) , 23046-23054
Free-standing N,Co-codoped TiO 2 nanoparticles for LiO 2 -based Li–O 2 batteries
N and Co co-doped TiO 2 nanoparticles grown on carbon fibers are employed to facilitate the formation and stabilization of LiO 2 .