Wei Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Jiang has a total of 214 co-authors. Here are the top co-authors by number of shared publications:
Yueming Sun
Southeast University
45 shared publicationsXinxin Ban
27 shared publicationsWenwen Tian
Southeast University
21 shared publicationsGuimin Zhao
Southeast University
20 shared publicationsBin Huang
17 shared publications- Yueming Sun
School of Chemistry and Chemical Engineering, Southeast University, Nanjing 211189, China
16 shared publications
Latest Publications
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (39) , 53740-53748
para -Boron Dendritic Modulation of MR-TADF Emitters Enables High-Efficiency Narrowband Solution-Processed OLEDs
The rigid planar structure of multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters delivers narrowband emission with high color purity but also induces spectral broadening and poor solution processability, hindering their application in solution-processed OLEDs. Herein, we develop a dendritic functionalization strategy at the para-position of boron in the classical MR-TADF emitter BCz-BN by tuning the electron-withdrawing characteristics of peripheral dendrons, affording two solution-processable emitters, CN-BN and Ph-BN. The cyano-containing CN-BN exhibits accelerated reverse intersystem crossing but broadened emission due to the presence of strong charge-transfer character. By removing the cyano group, Ph-BN preserves the intrinsic MR character with reduced excited-state relaxation. Combined with the steric protection of the dendritic units, Ph-BN achieves a narrow full width at half maximum (fwhm) of 28 nm and a high EQEmax of 24.9% in solution-processed OLEDs. Notably, the fwhm of Ph-BN increases by only 5 nm from photoluminescence to electroluminescence, whereas BCz-BN exhibits a much larger increase of 16 nm.
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (39) , 53740-53748
para -Boron Dendritic Modulation of MR-TADF Emitters Enables High-Efficiency Narrowband Solution-Processed OLEDs
The rigid planar structure of multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters delivers narrowband emission with high color purity but also induces spectral broadening and poor solution processability, hindering their application in solution-processed OLEDs. Herein, we develop a dendritic functionalization strategy at the para-position of boron in the classical MR-TADF emitter BCz-BN by tuning the electron-withdrawing characteristics of peripheral dendrons, affording two solution-processable emitters, CN-BN and Ph-BN. The cyano-containing CN-BN exhibits accelerated reverse intersystem crossing but broadened emission due to the presence of strong charge-transfer character. By removing the cyano group, Ph-BN preserves the intrinsic MR character with reduced excited-state relaxation. Combined with the steric protection of the dendritic units, Ph-BN achieves a narrow full width at half maximum (fwhm) of 28 nm and a high EQEmax of 24.9% in solution-processed OLEDs. Notably, the fwhm of Ph-BN increases by only 5 nm from photoluminescence to electroluminescence, whereas BCz-BN exhibits a much larger increase of 16 nm.
- Open Access
Counter‐ion modulation: A facile approach toward quenching‐resistant multi‐resonance emitters for efficient narrowband electroluminescence
Different from previous quenching‐resistant multi‐resonance (MR) emitters using covalently‐bonded steric substituents, here we propose a facile strategy for developing quenching‐resistant MR emitters via modulating counter ions of carbocation‐doped polycyclic chromophores. It is found that by simply changing the counter ion through a quantitative ion‐exchange reaction to increase its size from 28.4 to 440.9 cm 3 /mol, the π‐stacking of corresponding polycyclic skeleton is distinctly weakened, giving much narrowed emission bands under high doping concentrations, and greatly improved photoluminescent quantum efficiency in solid‐state film. Solution‐processed organic light‐emitting diodes (OLEDs) based on the emitter containing a bulky tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate ( BArF 24 − ) counter ion reveal narrowband electroluminescence with full‐width at half maxima of 43 nm and maximum external quantum efficiency of 18.7%, greatly superior than that of emitter with small Cl − counter ion where no detectable electroluminescence signal is observed, shedding light on the potential of counter‐ion modulation on developing efficient ionic MR emitters for narrowband OLEDs.
Open AccessCounter‐ion modulation: A facile approach toward quenching‐resistant multi‐resonance emitters for efficient narrowband electroluminescence
Different from previous quenching‐resistant multi‐resonance (MR) emitters using covalently‐bonded steric substituents, here we propose a facile strategy for developing quenching‐resistant MR emitters via modulating counter ions of carbocation‐doped polycyclic chromophores. It is found that by simply changing the counter ion through a quantitative ion‐exchange reaction to increase its size from 28.4 to 440.9 cm 3 /mol, the π‐stacking of corresponding polycyclic skeleton is distinctly weakened, giving much narrowed emission bands under high doping concentrations, and greatly improved photoluminescent quantum efficiency in solid‐state film. Solution‐processed organic light‐emitting diodes (OLEDs) based on the emitter containing a bulky tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate ( BArF 24 − ) counter ion reveal narrowband electroluminescence with full‐width at half maxima of 43 nm and maximum external quantum efficiency of 18.7%, greatly superior than that of emitter with small Cl − counter ion where no detectable electroluminescence signal is observed, shedding light on the potential of counter‐ion modulation on developing efficient ionic MR emitters for narrowband OLEDs.
- 23 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (5) , e13676
Manipulating Förster and Dexter Energy Transfer via Generation Regulation of Dendritic TADF Sensitizer for Solution‐Processable Narrowband Electroluminescence with EQE over 40%
A high‐efficiency thermally activated delayed fluorescence (TADF) sensitized fluorophor, abbreviated as TSF, requires suppressing Dexter energy transfer (DET) while ensuring an effective Förster resonance energy transfer (FRET). The current general strategy for blocking DET is encapsulating the terminal emitter to increase the distance between the TADF sensitizer and emitter (RDA); however, there are few reports on increasing RDA by modifying the molecular structure of the TADF sensitizer. Here, a molecular design is proposed to modulate RDA from the perspective of TADF sensitizer, where three dendritic TADF sensitizers (nGPh‐5CzBN, n = generation) are developed by increasing the generation of peripheral branches. On the one hand, TADF sensitizer with high‐generation dendrons blocks DET and prevents excitons loss by enlarging RDA; on the other hand, the excessive cladding of dendritic TADF sensitizer, in turn, also hinders efficient FRET from itself to the emitter. As a result, a record‐high maximum external quantum efficiency (EQEmax) of 40.6% is realized for 2GPh‐5CzBN‐based solution‐processable TSF‐OLEDs, with a full width at half maximum of 34 nm, but the EQEmax values are 23.9% and 16.0% for 1GPh‐5CzBN‐based and 3GPh‐5CzBN‐based counterparts, respectively. This work demonstrates the cutting‐edge EQE of solution‐processable narrowband devices, highlighting unique advantages of structural control for dendritic molecules.
- 23 October 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (5) , e13676
Manipulating Förster and Dexter Energy Transfer via Generation Regulation of Dendritic TADF Sensitizer for Solution‐Processable Narrowband Electroluminescence with EQE over 40%
A high‐efficiency thermally activated delayed fluorescence (TADF) sensitized fluorophor, abbreviated as TSF, requires suppressing Dexter energy transfer (DET) while ensuring an effective Förster resonance energy transfer (FRET). The current general strategy for blocking DET is encapsulating the terminal emitter to increase the distance between the TADF sensitizer and emitter (RDA); however, there are few reports on increasing RDA by modifying the molecular structure of the TADF sensitizer. Here, a molecular design is proposed to modulate RDA from the perspective of TADF sensitizer, where three dendritic TADF sensitizers (nGPh‐5CzBN, n = generation) are developed by increasing the generation of peripheral branches. On the one hand, TADF sensitizer with high‐generation dendrons blocks DET and prevents excitons loss by enlarging RDA; on the other hand, the excessive cladding of dendritic TADF sensitizer, in turn, also hinders efficient FRET from itself to the emitter. As a result, a record‐high maximum external quantum efficiency (EQEmax) of 40.6% is realized for 2GPh‐5CzBN‐based solution‐processable TSF‐OLEDs, with a full width at half maximum of 34 nm, but the EQEmax values are 23.9% and 16.0% for 1GPh‐5CzBN‐based and 3GPh‐5CzBN‐based counterparts, respectively. This work demonstrates the cutting‐edge EQE of solution‐processable narrowband devices, highlighting unique advantages of structural control for dendritic molecules.
- 28 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Symmetric Boron-Bridged Carbon Quantum Frameworks for Light-Emitting Diodes with over 20% External Quantum Efficiency
The development of eco-friendly solution-processed quantum dots plays an important role in the fabrication of electroluminescent light-emitting diodes (LEDs) for large-area display applications. However, the efficiency of these eco-friendly devices is still significantly lower than that of heavy metal-based state-of-the-art alternatives. Herein, we demonstrate metal-free carbon-based quantum materials: symmetric boron-bridged carbon quantum frameworks (sym-B-CQFs) composed of four dibenzo[fg,op]tetracene blocks bonded by boron atoms to form a rigid nonplanar conjugated framework. The sym-B-CQFs can deliver high-efficiency delayed fluorescence with a reverse intersystem crossing rate (kRISC) of 1.04 × 106 s-1 and 98 ± 0.6% total photoluminescence quantum yield. Experimental and theoretical analyses reveal that the nonplanar frameworks, originating from symmetric boron-bridges, lead to an alternate distribution of the frontier orbitals on different blocks and result in a small energy gap between the singlet and triplet excited states; this, in turn, increases kRISC. Solution processable LEDs based on sym-B-CQFs exhibit a record-high external quantum efficiency (EQE) of 20.4% and low efficiency roll-off (EQE = 18.0% at 1000 cd m-2). We anticipate that these high-performance carbon-based LEDs are highly suitable for next-generation large-area displays.
- 28 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Symmetric Boron-Bridged Carbon Quantum Frameworks for Light-Emitting Diodes with over 20% External Quantum Efficiency
The development of eco-friendly solution-processed quantum dots plays an important role in the fabrication of electroluminescent light-emitting diodes (LEDs) for large-area display applications. However, the efficiency of these eco-friendly devices is still significantly lower than that of heavy metal-based state-of-the-art alternatives. Herein, we demonstrate metal-free carbon-based quantum materials: symmetric boron-bridged carbon quantum frameworks (sym-B-CQFs) composed of four dibenzo[fg,op]tetracene blocks bonded by boron atoms to form a rigid nonplanar conjugated framework. The sym-B-CQFs can deliver high-efficiency delayed fluorescence with a reverse intersystem crossing rate (kRISC) of 1.04 × 106 s-1 and 98 ± 0.6% total photoluminescence quantum yield. Experimental and theoretical analyses reveal that the nonplanar frameworks, originating from symmetric boron-bridges, lead to an alternate distribution of the frontier orbitals on different blocks and result in a small energy gap between the singlet and triplet excited states; this, in turn, increases kRISC. Solution processable LEDs based on sym-B-CQFs exhibit a record-high external quantum efficiency (EQE) of 20.4% and low efficiency roll-off (EQE = 18.0% at 1000 cd m-2). We anticipate that these high-performance carbon-based LEDs are highly suitable for next-generation large-area displays.
- 21 May 2025
- Published by Springer Nature
- p. 1-15
Dendritic AIE Materials for Solution-Processable OLEDs
- 21 May 2025
- Published by Springer Nature
- p. 1-15
Dendritic AIE Materials for Solution-Processable OLEDs
- 16 April 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (11) , 1-12
U-shaped configuration design of host materials for solution-processed organic light-emitting diodes
- 16 April 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (11) , 1-12
U-shaped configuration design of host materials for solution-processed organic light-emitting diodes
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 69670-69678
A Tailored TADF Emitter Based on Diphenylacetylene Anthracene Derivatives for Highly Efficient Solution-Processed Pure Red Organic Light-Emitting Diodes
It holds enormous significance for red thermally activated delayed fluorescence (TADF) emitters to develop organic light-emitting diodes (OLEDs) with high efficiency and high color purity, which remains challenging for highly efficient solution-processed red TADF emitters due to the limitation of severe nonradiative decays. Herein, a red TADF emitter containing space interactions, 4,4'-(9,10-bis(phenylethynyl)anthracene-1,8-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DBP-2MOTPA), is designed and synthesized, composed of ethynyl as the acceptor and methoxytriarylamine (MOTPA) as the donor. The triphenylamine donor unit decorated with peripheral methoxy units not only improves the solubility for the solution-processed technology but also increases the electron-donating ability. The highly twisted donor-π-acceptor (D-π-A) architecture generates a small energy gap (ΔEST) of 0.14 eV, and the appropriate overlap of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) leads to a supernal photoluminescence quantum yield (ΦPL) of 68%. Consequently, the nondoped device based on DBP-2MOTPA with Commission Internationale de l'Eclairage (CIE) at (0.67, 0.33) exhibits the pure red emission, which satisfies the Rec.1931 standard red gamut (0.67, 0.33) and approaches the Rec.2020 standard (0.71, 0.29). Moreover, the doped devices employing DBP-2MOTPA as the emitter exhibit a maximum external quantum efficiency (EQE) of 6.09%, which is among the effective values in the solution-processed red TADF-OLEDs.
- 10 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (50) , 69670-69678
A Tailored TADF Emitter Based on Diphenylacetylene Anthracene Derivatives for Highly Efficient Solution-Processed Pure Red Organic Light-Emitting Diodes
It holds enormous significance for red thermally activated delayed fluorescence (TADF) emitters to develop organic light-emitting diodes (OLEDs) with high efficiency and high color purity, which remains challenging for highly efficient solution-processed red TADF emitters due to the limitation of severe nonradiative decays. Herein, a red TADF emitter containing space interactions, 4,4'-(9,10-bis(phenylethynyl)anthracene-1,8-diyl)bis(N,N-bis(4-methoxyphenyl)aniline) (DBP-2MOTPA), is designed and synthesized, composed of ethynyl as the acceptor and methoxytriarylamine (MOTPA) as the donor. The triphenylamine donor unit decorated with peripheral methoxy units not only improves the solubility for the solution-processed technology but also increases the electron-donating ability. The highly twisted donor-π-acceptor (D-π-A) architecture generates a small energy gap (ΔEST) of 0.14 eV, and the appropriate overlap of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) leads to a supernal photoluminescence quantum yield (ΦPL) of 68%. Consequently, the nondoped device based on DBP-2MOTPA with Commission Internationale de l'Eclairage (CIE) at (0.67, 0.33) exhibits the pure red emission, which satisfies the Rec.1931 standard red gamut (0.67, 0.33) and approaches the Rec.2020 standard (0.71, 0.29). Moreover, the doped devices employing DBP-2MOTPA as the emitter exhibit a maximum external quantum efficiency (EQE) of 6.09%, which is among the effective values in the solution-processed red TADF-OLEDs.
- 13 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (46)
Cascade Effect of a Dimerized Thermally Activated Delayed Fluorescence Dendrimer
Thermally activated delayed fluorescence (TADF) emitters with a high horizontal orientation are highly essential for improving the external quantum efficiency (EQE) of organic light‐emitting diodes; however, pivotal molecular design strategies to improve the horizontal orientation of solution‐processable TADF emitters are still scarce and challenging. Herein, a phenyl bridge is adopted to connect the double TADF units, and generate a dimerized TADF dendrimer, D4CzBNPh‐SF. Compared to its counterpart with a single TADF unit, the proof‐of‐the‐concept molecule not only exhibits an improved horizontal dipole ratio (78 %) due to the π‐delocalization‐induced extended molecular conjugation, but also displays a faster reversed intersystem crossing rate constant (6.08×106 s−1) and a high photoluminescence quantum yield of 95 % in neat film. Consequently, the non‐doped solution‐processed device with D4CzBNPh‐SF as the emitter achieves an ultra‐high maximum EQE of 32.6 %, which remains at 26.6 % under a luminance of 1000 cd/m2. Furthermore, when using D4CzBNPh‐SF as a sensitizer, the TADF‐sensitized fluorescence device exhibits a high maximum EQE of 30.7 % at a luminance of 575 cd/m2 and a full width at half maximum of 36 nm.
- 13 September 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (46)
Cascade Effect of a Dimerized Thermally Activated Delayed Fluorescence Dendrimer
Thermally activated delayed fluorescence (TADF) emitters with a high horizontal orientation are highly essential for improving the external quantum efficiency (EQE) of organic light‐emitting diodes; however, pivotal molecular design strategies to improve the horizontal orientation of solution‐processable TADF emitters are still scarce and challenging. Herein, a phenyl bridge is adopted to connect the double TADF units, and generate a dimerized TADF dendrimer, D4CzBNPh‐SF. Compared to its counterpart with a single TADF unit, the proof‐of‐the‐concept molecule not only exhibits an improved horizontal dipole ratio (78 %) due to the π‐delocalization‐induced extended molecular conjugation, but also displays a faster reversed intersystem crossing rate constant (6.08×106 s−1) and a high photoluminescence quantum yield of 95 % in neat film. Consequently, the non‐doped solution‐processed device with D4CzBNPh‐SF as the emitter achieves an ultra‐high maximum EQE of 32.6 %, which remains at 26.6 % under a luminance of 1000 cd/m2. Furthermore, when using D4CzBNPh‐SF as a sensitizer, the TADF‐sensitized fluorescence device exhibits a high maximum EQE of 30.7 % at a luminance of 575 cd/m2 and a full width at half maximum of 36 nm.