LYLiuqing Yang

Liuqing Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Liuqing Yang has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Polar Groups in Polyimide Main Chain on Its Dielectric Properties

    by Shichun Hu, Liuqing Yang, Liuhao Jiang, Benqin Zhu, Shengtao Li

  • Open Access

    High-temperature dielectric with excellent capacitive performance enabled by rationally designed traps in blends

    by Zhonghua Zhao, Shuo Zhang, Mingru Li, Yang Feng, Liuqing Yang, Shengtao Li

    Polymer dielectrics with excellent capacitive performance are urgently needed in advanced electrical and electronic systems. However, due to the dramatic increase in the conduction loss, the energy density and efficiency of polymers degrade severely at elevated temperatures, limiting their application in harsh environments up to 150 °C. Herein, an all-organic polyurea (PU)/polyetherimide (PEI) blend film is designed to prepare high-temperature polymer dielectric. It is found that carrier traps can be introduced by blending, and the hydrogen bond between PU and PEI increases the trap depth, leading to suppressed leakage current and enhanced breakdown strength, thus improving the energy storage performance. PU/30%PEI exhibits a high discharged energy density of ∼3.74 J/cm3 with an efficiency higher than 90% at 150 °C, which is 78% and 70% higher than pristine PU and PEI, respectively. This work provides a facile strategy to improve the energy storage performance of polymer dielectrics by introducing deep traps through blending.


  • Customizing superior surface insulation properties of polymeric dielectric via in-plane molecular chain orientation

    by Jiakai Zeng, Zhiyuan Li, Yihan Zhou, Liuqing Yang, Wenfeng Liu, Xiaohong Chi, Lu Cheng, Shengtao Li

    Surface flashover is a common breakdown phenomenon on material surfaces for which surface charge migration property, determined by surface composition and molecular chain structure, is crucial. Precise modulation of charge migration property by simple and efficient methods to improve surface flashover voltage is the goal in industry. Here, in-plane molecular chain orientation (MCO) modulation by uniaxial stretching was proposed to achieve this goal and investigate the intrinsic mechanism of charge migration on flashover. Flashover voltage and accompanying leakage current, performed with electrodes oriented at varying angles to the MCO direction, show a consistent trend, which skillfully reveals that the facilitated charge migration is favorable for improving flashover voltage. When the stretching ratio is 3.5, the flashover voltage along the stretching direction (SD) increases by up to 48.7%, while the in-plane minimum flashover voltage remains essentially unchanged with the change in stretching ratio. Molecular chain segment motion properties along different directions further elucidate that the surprising improvement of flashover voltage along SD is primarily due to the MCO that promotes intra-chain charge migration. This work provides a new perspective on anti-flashover modification of polymeric dielectric and will promote the development of surface flashover mechanisms.


  • Open Access

    Optimizing the conjugated structure of aromatic polyurea for high-temperature capacitive energy storage

    by Zhonghua Zhao, Yang Feng, Liuqing Yang, Shuo Zhang, Xia Liu, Yan Zhang, Mingru Li, Shengtao Li

    Polymer dielectrics that can operate under simultaneous electric and thermal extremes are urgently needed in advanced electrical and electronic devices. However, the high thermal stability of polymers is typically endowed by the conjugated aromatic backbones, leading to enhanced conduction loss and poor energy storage density. Herein, we regulate the bridge linkages between adjacent benzene rings to simultaneously improve the thermal stability and optimize the conjugated structure of polyurea (PU), thereby achieving high-temperature energy storage performance. With the introduction of ether, methylene, and isopropyl structural units, the dihedral angles between adjacent benzene planes gradually increase, enabling PU to achieve excellent energy density (Ue) and charge–discharge efficiency (η) with suppressed leakage conduction and improved breakdown strength. The optimal PU with isopropyl moiety achieves an attractive Ue of 5.1 and 2.1 J/cm3 with η above 90% at 30 and 150 °C, respectively. This work provides a facile strategy to improve the energy storage performance of aromatic polymers by optimizing the interaction between adjacent conjugated benzene planes.


  • Open Access

    Changes in breakdown and charge migration of cellulose/oil composite after CO2 adsorption

    by Jiachen Yu, Guanghao Qu, Huize Cui, Feng Zhao, Liuqing Yang, Yuanwei Zhu, Shengtao Li

    Greenhouse gas CO2 has rarely been used as an insulating gas in cellulose/oil insulated energy devices since the benefits of it on dielectric properties of cellulose/oil have yet to be known. This work reveals that CO2 can be adsorbed by unaged and aged cellulose, improving the breakdown strength of cellulose/oil composite. The traps introduced by CO2 adsorption are proved to be the key factor. The adsorption of CO2 makes shallow traps shallower, while making deep traps deeper. These changes in traps hinder the charge accumulation on dielectric surfaces and enhance the electron capture ability in the dielectric bulk. Moreover, the charge mobility and electrical conductivity of cellulose/oil composite increase after adsorbing CO2, while the surface potential is reduced. Therefore, the collisional ionization is hindered and further electrical breakdown is improved. In the meantime, the energy level distribution models of cellulose–air and cellulose–CO2 composites were comparably studied. This work is conducive to understanding the changes in electrical properties after CO2 adsorption and the prospects of CO2 in cellulose/oil insulation.

  • Diverse effects of gases on surface flashover in a wide pressure range from atmospheric to near vacuum pressure

    by Jiakai Zeng, Xia Liu, Zhuofan Li, Yan Zhang, Liuqing Yang, Wenfeng Liu, Xiaohong Chi, Lu Cheng

    Investigations into surface flashover characteristics and underlying mechanisms in the range from atmospheric to near vacuum pressure are significant for developing high-power equipment based on the application of gases used for flashover prevention. In this work, polyetherimide (PEI) films with controllable outgassing properties were prepared. Then, the gas-related factors, namely, gas pressure, the type of gases, and outgassing were clarified by investigating the DC surface flashover of films in a wide pressure range (10−4–105 Pa) in different gas atmospheres. In all conditions, the variation of flashover voltage was found to be divided into three regions with pressure increasing, while its deeper reason is that the number density of molecules of the gas layer is affected by outgassing and ambient gas pressure, which affects the collision of electrons. In region I, the surface flashover voltage is closely related to outgassing and shows the highest value. In region II, the surface flashover is jointly affected by outgassing and ambient gas, along with a rapid decrease of flashover voltage with increasing pressure. In region III, the surface flashover is dominated by ambient gas, and the surface flashover voltage shows a U-shaped curve with increasing pressure. Transition points of the three regions shift significantly with the change of outgassing properties. In region I, the desorption of adsorbed gas has little effect on the surface flashover voltage, while the escape of dissolved gas dominates. Finally, a model of the diverse effects of gases on surface flashover in a wide pressure range was established.


  • Open Access

    Effects of Long-Term Vibration on Cellulose Degradation in an Oil-Impregnated Pressboard under Simultaneous Thermal–Electrical–Mechanical Stress Aging

    by Shijun Li, Liuqing Yang, Shengtao Li

    Due to the complex operation conditions in a power transformer, an oil-impregnated pressboard (OIP) simultaneously suffers from thermal, electrical, and mechanical stress. Since most research studies have paid much attention to thermal or electrical aging of OIPs, this paper analyzes the effects of long-term mechanical vibrations on cellulose degradation in OIPs under simultaneous multi-stress. The aging experiments were firstly conducted at 130 °C, with a DC electric voltage of +6 kV, vibration amplitude of 10–50 μm, and vibration frequency of 100–300 Hz. The finite element analysis (FEA) of the pressboard vibration model was then performed on Abaqus to investigate the time–frequency domain characteristic parameters of compressive stress on the pressboard under varied vibration frequencies and amplitudes. The FEA results reveal that compressive stress on the pressboard in a multi-stress aging experiment coincided with the axial compressive stress on the insulation spacers in an SZ-50000/110 transformer. Moreover, combined with the degree of polymerization (DP) of cellulose, the effects of long-term vibration on cellulose degradation are reflected in two ways: the increase in compressive stress on the pressboard generates more links available for degradation, while more high frequency harmonic components in compressive stress accelerate the reaction rate in cellulose degradation.


  • Engineering Polymer Forest on Membranes: Tuning Density, Thickness, and Architecture for Biofouling Control

    by Wen Ma, Liuqing Yang, Tiantian Chen, Zhibin Ye, Nathalie Tufenkji, Saifur Rahaman


  • Effect of Insulating Oil on Space Charge Characteristics of Oil-impregnated Paper Under DC Voltage

    by Ganlin Mao, Shengtao Li, Shijun Li, Zhao Ge, Liuqing Yang, Liuhao Jiang

    At present, the oil-paper insulation structure is mainly composed of traditional mineral oil and cellulose insulation paper. The hots pot of future research is to select better insulation oil to improve the overall insulation life of the system. Compared with traditional mineral insulation oil, gas to liquid(GTL) oil made from base oil refined by natural gas liquefaction technology by Fischer-Tropsch(FT) method are characterized by high oxidative stability and low sulfur content. In this paper, the space charge accumulation, distribution and attenuation characteristics of oil-impregnated paper composed of GTL oil and traditional mineral oil were studied. The space trap energy level and trap density distribution of two oil-impregnated papers were obtained according to isothermal decay current(IDC) method. The experimental results show that in the voltage-on stage, traditional mineral oil-impregnated paper is more prone to charge injection and the injection speed is faster. In the voltage-off stage, the traditional mineral oil-impregnated paper attenuates the charge faster, and the GTL oil-impregnated paper has more residual charge. Moreover, the trap level of GTL oil-impregnated paper is deeper than that of traditional mineral oil-impregnated paper.