Joel Villavicencio Gastelu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Joel Villavicencio Gastelu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Joel David Melo
Federal University of ABC
6 shared publications A. Padilha-Feltrin
São Paulo State University - UNESP
3 shared publications- Alain Victor Huillcahuaman Tecsi
Facultad de Ingeniería, Universidad Tecnológica del Perú (UTP), Lima 15046, Peru
2 shared publications - Cristhian Anderson Lopez Castillo
Facultad de Ingeniería, Universidad Tecnológica del Perú (UTP), Lima 15046, Peru
2 shared publications A. Padilha Feltrin
Departamento de Engenharia Elétrica, Universidade Estadual Paulista - UNESP, Ilha Solteira, Brazil
1 shared publicationAngel Eduardo
1 shared publication
Latest Publications
- Open Access
Hybrid PSO–WOA Algorithm for Optimal Siting and Sizing of Capacitor Banks and Photovoltaic Generators in Distribution Networks
The increasing growth in electricity demand leads to higher voltage drops and power losses in distribution networks. The integration of capacitor banks (CBs) and photovoltaic generators (PVGs) helps improve network performance; however, their effectiveness depends on their optimal sizing and placement within the electrical network. This study proposes a hybrid metaheuristic algorithm to determine the optimal locations and sizes of CBs and PVGs in distribution networks under hourly AC power flow, hourly dynamic switching of capacitor banks, and an economic model with tariffs differentiated by consumer type. The proposed PSO–WOA algorithm combines the fast convergence capability of Particle Swarm Optimization (PSO) with the local refinement capability of the Whale Optimization Algorithm (WOA). In addition, to guide the initialization of the population, loss sensitivity indices based on the derivatives of active power losses with respect to voltage and reactive power are employed. The hybrid algorithm begins with the PSO phase to intensively exploit the search space and subsequently transfers the population without reinitialization to the WOA phase to refine promising solutions and improve the final convergence. The application of the proposed PSO–WOA algorithm to the IEEE 33-bus distribution system achieved a 51.92% reduction in active power losses, increased the minimum voltage from 0.9163 p.u. to 0.9500 p.u., and reduced the total annual cost by 50.05% (from 2.573 to 1.285 MUSD/year). A comparison with similar optimization algorithms, namely PSO, WOA, the reverse hybrid WOA–PSO, and the Genetic Algorithm (GA), showed that the proposed PSO–WOA achieved the best overall performance in terms of feasibility and statistical stability, with a mean solution quality comparable to that of PSO but with lower dispersion and a better worst case across independent runs. GA and WOA showed the greatest difficulty in satisfying the operational constraints, achieving only 60% and 79% feasible solutions, respectively, whereas the proposed algorithm achieved a 100% feasibility rate.
Open AccessHybrid PSO–WOA Algorithm for Optimal Siting and Sizing of Capacitor Banks and Photovoltaic Generators in Distribution Networks
The increasing growth in electricity demand leads to higher voltage drops and power losses in distribution networks. The integration of capacitor banks (CBs) and photovoltaic generators (PVGs) helps improve network performance; however, their effectiveness depends on their optimal sizing and placement within the electrical network. This study proposes a hybrid metaheuristic algorithm to determine the optimal locations and sizes of CBs and PVGs in distribution networks under hourly AC power flow, hourly dynamic switching of capacitor banks, and an economic model with tariffs differentiated by consumer type. The proposed PSO–WOA algorithm combines the fast convergence capability of Particle Swarm Optimization (PSO) with the local refinement capability of the Whale Optimization Algorithm (WOA). In addition, to guide the initialization of the population, loss sensitivity indices based on the derivatives of active power losses with respect to voltage and reactive power are employed. The hybrid algorithm begins with the PSO phase to intensively exploit the search space and subsequently transfers the population without reinitialization to the WOA phase to refine promising solutions and improve the final convergence. The application of the proposed PSO–WOA algorithm to the IEEE 33-bus distribution system achieved a 51.92% reduction in active power losses, increased the minimum voltage from 0.9163 p.u. to 0.9500 p.u., and reduced the total annual cost by 50.05% (from 2.573 to 1.285 MUSD/year). A comparison with similar optimization algorithms, namely PSO, WOA, the reverse hybrid WOA–PSO, and the Genetic Algorithm (GA), showed that the proposed PSO–WOA achieved the best overall performance in terms of feasibility and statistical stability, with a mean solution quality comparable to that of PSO but with lower dispersion and a better worst case across independent runs. GA and WOA showed the greatest difficulty in satisfying the operational constraints, achieving only 60% and 79% feasible solutions, respectively, whereas the proposed algorithm achieved a 100% feasibility rate.
- Open Access
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Voltage Regulation Considering BESS in Microgrids with High Photovoltaic Generation Penetration
In microgrids with high photovoltaic (PV) generation penetration, voltage regulation has emerged as a critical challenge owing to inherent variability in power production. This study evaluates the effectiveness of battery energy storage systems (BESS) in mitigating voltage fluctuations by applying droop-control techniques. Among the various microgrid control strategies, droop control is the most significant. In addition to this conventional approach, in this work, the state-of-charge (SoC)-based control for the BESS was implemented, enabling more dynamic voltage regulation in response to system variations. Simulations were conducted to assess control performance under two scenarios: (1) a microgrid with BESS regulated solely through conventional droop control, where a voltage drop to 0.87 p.u. was observed, stabilizing at 1.025 p.u. within 41 ms; and (2) a microgrid with BESS regulated using a combination of droop control and SoC-based control, resulting in a voltage drop to 0.892 p.u., with stabilization at 1.01 p.u. achieved in just 20 ms. The results demonstrate that the proposed methodology maintains a voltage within permissible limits while achieving faster response times than the conventional approach.
- 1 January 2025
- Published by LACCEI (Latin American and Caribbean Consortium of Engineering Institutions)
Open AccessVoltage Regulation Considering BESS in Microgrids with High Photovoltaic Generation Penetration
In microgrids with high photovoltaic (PV) generation penetration, voltage regulation has emerged as a critical challenge owing to inherent variability in power production. This study evaluates the effectiveness of battery energy storage systems (BESS) in mitigating voltage fluctuations by applying droop-control techniques. Among the various microgrid control strategies, droop control is the most significant. In addition to this conventional approach, in this work, the state-of-charge (SoC)-based control for the BESS was implemented, enabling more dynamic voltage regulation in response to system variations. Simulations were conducted to assess control performance under two scenarios: (1) a microgrid with BESS regulated solely through conventional droop control, where a voltage drop to 0.87 p.u. was observed, stabilizing at 1.025 p.u. within 41 ms; and (2) a microgrid with BESS regulated using a combination of droop control and SoC-based control, resulting in a voltage drop to 0.892 p.u., with stabilization at 1.01 p.u. achieved in just 20 ms. The results demonstrate that the proposed methodology maintains a voltage within permissible limits while achieving faster response times than the conventional approach.
- Open Access
- 1 January 2025
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 38 (11) , 2675-2684
Particle Swarm Optimization using Adaptive Inertia Weight for Optimal Capacitor Bank Placement in Radial Distribution Networks
The steady increase in energy demand results in under-voltage problems and an increase in the active power losses in electrical distribution networks. The optimal placement of capacitor banks in distribution systems is essential for enhancing the voltage profile and reducing power losses. This paper proposes a modified particle swarm optimization (PSO) algorithm using an adaptive inertia constant to expand the search space and determine the optimal locations and sizes of capacitor banks. Two loss sensitivity indices (LSI) were applied to identify candidate buses. This methodology was applied to the IEEE 33-bus radial distribution system considering two scenarios: one with fixed capacitors (Case 1) and the other with switched capacitors (Case 2). The results demonstrate that the proposed algorithm effectively reduces system losses by 31.30% and 31.38% in Cases 1 and 2, respectively. In addition, in both cases, the voltage profiles were improved and maintained within allowable limits. Therefore, the proposed methodology is expected to work well in larger electrical distribution networks.
- 1 January 2025
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 38 (11) , 2675-2684
Open AccessParticle Swarm Optimization using Adaptive Inertia Weight for Optimal Capacitor Bank Placement in Radial Distribution Networks
The steady increase in energy demand results in under-voltage problems and an increase in the active power losses in electrical distribution networks. The optimal placement of capacitor banks in distribution systems is essential for enhancing the voltage profile and reducing power losses. This paper proposes a modified particle swarm optimization (PSO) algorithm using an adaptive inertia constant to expand the search space and determine the optimal locations and sizes of capacitor banks. Two loss sensitivity indices (LSI) were applied to identify candidate buses. This methodology was applied to the IEEE 33-bus radial distribution system considering two scenarios: one with fixed capacitors (Case 1) and the other with switched capacitors (Case 2). The results demonstrate that the proposed algorithm effectively reduces system losses by 31.30% and 31.38% in Cases 1 and 2, respectively. In addition, in both cases, the voltage profiles were improved and maintained within allowable limits. Therefore, the proposed methodology is expected to work well in larger electrical distribution networks.
- 22 November 2023
- Published by Springer Nature
- p. 197-219
Inverter-Based Local Control Methods for Mitigating Overvoltage in Photovoltaic Penetrated Low-Voltage Networks
- 22 November 2023
- Published by Springer Nature
- p. 197-219
Inverter-Based Local Control Methods for Mitigating Overvoltage in Photovoltaic Penetrated Low-Voltage Networks
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 28, 807-812
On Substrates, Blocks and States: Distributed Energy Resources’ Diffusion Models, Use Cases and Frontiers in Power System Planning
Due to the ongoing adoption of new household energy technologies, there has been an increasing effort to analyze these behavioral patterns and predict future dynamics in space and time. Likewise, power system planners and policy makers aim to assess the effects of large-scale adoption of energy technologies. This paper presents the principal data sources and building blocks for spatiotemporal models that can be used to simulate the large-scale adoption of distributed energy resources. We explain the advantages of the estimates/forecasts obtained by these methods and limitations modelers and decision-makers face during implementation. Finally, we provide an overview over the various use cases for such models in power systems, outlining the advantages and barriers of each model typology for these domains. This comparison shows a trend towards computationally heavier and more complex models-based approaches rooted in Artificial Intelligence, such as Agent-based Modelling, mainly applied to consumer characterization or electricity distribution network planning.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 28, 807-812
On Substrates, Blocks and States: Distributed Energy Resources’ Diffusion Models, Use Cases and Frontiers in Power System Planning
Due to the ongoing adoption of new household energy technologies, there has been an increasing effort to analyze these behavioral patterns and predict future dynamics in space and time. Likewise, power system planners and policy makers aim to assess the effects of large-scale adoption of energy technologies. This paper presents the principal data sources and building blocks for spatiotemporal models that can be used to simulate the large-scale adoption of distributed energy resources. We explain the advantages of the estimates/forecasts obtained by these methods and limitations modelers and decision-makers face during implementation. Finally, we provide an overview over the various use cases for such models in power systems, outlining the advantages and barriers of each model typology for these domains. This comparison shows a trend towards computationally heavier and more complex models-based approaches rooted in Artificial Intelligence, such as Agent-based Modelling, mainly applied to consumer characterization or electricity distribution network planning.
- 1 January 2022
- Published by Elsevier in Renewable Energy
- Vol. 181, 1188-1196
Spatiotemporal estimation of photovoltaic system adopters using fuzzy logic
- 1 January 2022
- Published by Elsevier in Renewable Energy
- Vol. 181, 1188-1196
Spatiotemporal estimation of photovoltaic system adopters using fuzzy logic
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Spatial-Temporal Estimation of the PV Market Potential in Subareas
This paper presents a methodology to estimate photovoltaic (PV) market potential in subareas along the time. The proposed methodology takes into account technical and economic constraints to determine the PV market potential. In the estimation is considered the market adhesion degree for investing in PV system. This methodology is applied to a medium-sized city in Brazil by using historical data of PV systems installations from 2013 to 2018 as a way to adjust the proposed model. One of the results are thematic maps that show the PV market potential by subareas in the planning horizon of study. Furthermore, two tariffs schemes are considered in the study of scenarios to observe changes in the estimated values of potential due to the application of other incentive program. These results provide useful information for the planning of distribution system considering the expansion of PV systems and the energy quantity that users will stop consuming from the distribution network.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Spatial-Temporal Estimation of the PV Market Potential in Subareas
This paper presents a methodology to estimate photovoltaic (PV) market potential in subareas along the time. The proposed methodology takes into account technical and economic constraints to determine the PV market potential. In the estimation is considered the market adhesion degree for investing in PV system. This methodology is applied to a medium-sized city in Brazil by using historical data of PV systems installations from 2013 to 2018 as a way to adjust the proposed model. One of the results are thematic maps that show the PV market potential by subareas in the planning horizon of study. Furthermore, two tariffs schemes are considered in the study of scenarios to observe changes in the estimated values of potential due to the application of other incentive program. These results provide useful information for the planning of distribution system considering the expansion of PV systems and the energy quantity that users will stop consuming from the distribution network.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Allocation of PV Systems from Residential Subareas to Distribution Transformers
In order to develop studies such as the impact of residential photovoltaic (PV) system installation in low-voltage networks, the number of PV systems by transformer must be known. The number of residential PV systems can be estimated using socioeconomics information obtained in census data. This information is aggregated by census tract or subarea. In this paper, a technique to allocate estimated PV systems from the PV market potential in subareas to distribution transformers is presented. The proposed methodology is applied to a residential area in Brazil and, then, a voltage impact study in the low-voltage network is performed. The obtained results are hence useful on the planning and operation studies performed by utilities.
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Allocation of PV Systems from Residential Subareas to Distribution Transformers
In order to develop studies such as the impact of residential photovoltaic (PV) system installation in low-voltage networks, the number of PV systems by transformer must be known. The number of residential PV systems can be estimated using socioeconomics information obtained in census data. This information is aggregated by census tract or subarea. In this paper, a technique to allocate estimated PV systems from the PV market potential in subareas to distribution transformers is presented. The proposed methodology is applied to a residential area in Brazil and, then, a voltage impact study in the low-voltage network is performed. The obtained results are hence useful on the planning and operation studies performed by utilities.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Hierarchical Bayesian Model for Estimating Spatial-Temporal Photovoltaic Potential in Residential Areas
This paper presents a Bayesian hierarchical model to estimate the spatial-temporal photovoltaic potential in residential areas. The proposed model offers a probabilistic approach that uses technical criteria of planners and favorable socioeconomic conditions for installing photovoltaic systems. Thus, the inhabitants' distrust of the photovoltaic solar energy choice is modeled via random distributions. The results are a spatial database that allows the creation of thematic maps to visualize the spatial distribution of photovoltaic potential in cities' residential areas for each year of the planning horizon. The proposed methodology was applied to a medium-sized city in Brazil. Maps which came from the application show the subareas with higher photovoltaic potential, where a range of impacts could appear on the distribution networks. Therefore, the results can contribute to multi-scenario planning and operation studies of low- and medium-voltage networks performed by utility companies.
- 1 August 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Hierarchical Bayesian Model for Estimating Spatial-Temporal Photovoltaic Potential in Residential Areas
This paper presents a Bayesian hierarchical model to estimate the spatial-temporal photovoltaic potential in residential areas. The proposed model offers a probabilistic approach that uses technical criteria of planners and favorable socioeconomic conditions for installing photovoltaic systems. Thus, the inhabitants' distrust of the photovoltaic solar energy choice is modeled via random distributions. The results are a spatial database that allows the creation of thematic maps to visualize the spatial distribution of photovoltaic potential in cities' residential areas for each year of the planning horizon. The proposed methodology was applied to a medium-sized city in Brazil. Maps which came from the application show the subareas with higher photovoltaic potential, where a range of impacts could appear on the distribution networks. Therefore, the results can contribute to multi-scenario planning and operation studies of low- and medium-voltage networks performed by utility companies.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 9 (2) , 971-979
Hierarchical Bayesian Model for Estimating Spatial-Temporal Photovoltaic Potential in Residential Areas
This paper presents a Bayesian hierarchical model to estimate the spatial-temporal photovoltaic potential in residential areas. The proposed model offers a probabilistic approach that uses technical criteria of planners and favorable socioeconomic conditions for installing photovoltaic systems. Thus, the inhabitants' distrust of the photovoltaic solar energy choice is modeled via random distributions. The results are a spatial database that allows the creation of thematic maps to visualize the spatial distribution of photovoltaic potential in cities' residential areas for each year of the planning horizon. The proposed methodology was applied to a medium-sized city in Brazil. Maps which came from the application show the subareas with higher photovoltaic potential, where a range of impacts could appear on the distribution networks. Therefore, the results can contribute to multi-scenario planning and operation studies of low- and medium-voltage networks performed by utility companies.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 9 (2) , 971-979
Hierarchical Bayesian Model for Estimating Spatial-Temporal Photovoltaic Potential in Residential Areas
This paper presents a Bayesian hierarchical model to estimate the spatial-temporal photovoltaic potential in residential areas. The proposed model offers a probabilistic approach that uses technical criteria of planners and favorable socioeconomic conditions for installing photovoltaic systems. Thus, the inhabitants' distrust of the photovoltaic solar energy choice is modeled via random distributions. The results are a spatial database that allows the creation of thematic maps to visualize the spatial distribution of photovoltaic potential in cities' residential areas for each year of the planning horizon. The proposed methodology was applied to a medium-sized city in Brazil. Maps which came from the application show the subareas with higher photovoltaic potential, where a range of impacts could appear on the distribution networks. Therefore, the results can contribute to multi-scenario planning and operation studies of low- and medium-voltage networks performed by utility companies.