Jiewei Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiewei Zhou has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Ahedo
Universidad Carlos III de Madrid
12 shared publications - Mario Merino
Department of Aerospace Engineering, Universidad Carlos III de Madrid , Leganés
4 shared publications - Adrián Domínguez-Vázquez
Universidad de Málaga
3 shared publications - Pablo Fajardo
Aerospace Engineering Department, Universidad Carlos III de Madrid, Leganes, Madrid, Spain
3 shared publications - Borja Bayón-Buján
Department of Aerospace Engineering, Universidad Carlos III de Madrid, Leganés, Spain
2 shared publications Daniel Perez
Aerospace Engineering, Universidad Carlos III de Madrid, Av. de la Universidad, 30, Leganés, Madrid, 28911, SPAIN
2 shared publications
Latest Publications
- 1 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (11) , 115008
A coupled model of the wave emission and the 2D plasma discharge in a radiofrequency ion thruster
A 2D hybrid (particle-in-cell/fluid) model has been enhanced to analyze the time-dependent coupling of the RF emission with the 2D plasma discharge in a cylindrical radiofrequency ion thruster. Electromagnetic fields are described with radial Maxwell’s equations, assuming a purely axial magnetic field induced by the external coil and plasma currents. The full time-dependent electron momentum equation is integrated. The ion response is quasi-stationary while the electron current density is highly time-dependent and develops several harmonics of the exciting frequency. Phase shifts between the electromagnetic fields and the azimuthal electron current change much with the temporal derivatives of the electron current and the inclusion of the plasma-induced magnetic field. These two features lead to a significant time-averaged cross-field magnetic confinement even in the absence of a time-averaged magnetic field, which improves the thruster performance appreciably.
- 1 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (11) , 115008
A coupled model of the wave emission and the 2D plasma discharge in a radiofrequency ion thruster
A 2D hybrid (particle-in-cell/fluid) model has been enhanced to analyze the time-dependent coupling of the RF emission with the 2D plasma discharge in a cylindrical radiofrequency ion thruster. Electromagnetic fields are described with radial Maxwell’s equations, assuming a purely axial magnetic field induced by the external coil and plasma currents. The full time-dependent electron momentum equation is integrated. The ion response is quasi-stationary while the electron current density is highly time-dependent and develops several harmonics of the exciting frequency. Phase shifts between the electromagnetic fields and the azimuthal electron current change much with the temporal derivatives of the electron current and the inclusion of the plasma-induced magnetic field. These two features lead to a significant time-averaged cross-field magnetic confinement even in the absence of a time-averaged magnetic field, which improves the thruster performance appreciably.
- 1 June 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (6) , 065011
Analysis of a low-power cylindrical Hall thruster with 2D hybrid plasma simulations
The plasma discharge of the small CHT200 cylindrical Hall thruster has been simulated using the axisymmetric hybrid code HYPHEN. Experimental data from three operating points with xenon have been used to fit empirical parameters of the plasma model and partially validate it. The dynamics of four heavy species (up to Xe 3 + ) are tracked. The analysis covers the 2D maps of the main plasma magnitudes, the 1D profiles of the plasma-wall interaction variables, and the performance figures (based on current and power balances). The differences with the plasma discharge in annular Hall thrusters are highlighted. In the cylindrical thruster the discharge is more complex and there exist two well-distinguished ionization regions. The one close to the annular anode/injector, at the rear corner of the chamber, is the main source of Xe + ions, which are accelerated obliquely towards the channel axis and the exit. By geometrical convergence, a high peak of Xe + density is formed around the axis, which results in a region of high ionization for Xe 2 + and Xe 3 + , which inherit the energy of the ionized Xe + . This explains the large current-based propellant utilizations characteristic of CHTs. Downstream energies per unit of charge of the three ion species are found of the same order. Ion velocity distribution functions computed at two locations in the thruster axis illustrate more in detail the behavior of the different ion species. For the selected operating points of the CHT200, about 2/3 of the cathode-emitted electrons drift inwards, leading to a low thrust efficiency. Simulations demonstrate that this is related to large energy losses in the chamber (up to 65% of the total power), which are shown to be due mainly to an extended wall region with large secondary electron emission. Alternatives for modeling the electron energy equation and its boundary conditions to reproduce the plasma cooling in the plume are discussed and their effects on the electron current topology are commented.
- 1 June 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (6) , 065011
Analysis of a low-power cylindrical Hall thruster with 2D hybrid plasma simulations
The plasma discharge of the small CHT200 cylindrical Hall thruster has been simulated using the axisymmetric hybrid code HYPHEN. Experimental data from three operating points with xenon have been used to fit empirical parameters of the plasma model and partially validate it. The dynamics of four heavy species (up to Xe 3 + ) are tracked. The analysis covers the 2D maps of the main plasma magnitudes, the 1D profiles of the plasma-wall interaction variables, and the performance figures (based on current and power balances). The differences with the plasma discharge in annular Hall thrusters are highlighted. In the cylindrical thruster the discharge is more complex and there exist two well-distinguished ionization regions. The one close to the annular anode/injector, at the rear corner of the chamber, is the main source of Xe + ions, which are accelerated obliquely towards the channel axis and the exit. By geometrical convergence, a high peak of Xe + density is formed around the axis, which results in a region of high ionization for Xe 2 + and Xe 3 + , which inherit the energy of the ionized Xe + . This explains the large current-based propellant utilizations characteristic of CHTs. Downstream energies per unit of charge of the three ion species are found of the same order. Ion velocity distribution functions computed at two locations in the thruster axis illustrate more in detail the behavior of the different ion species. For the selected operating points of the CHT200, about 2/3 of the cathode-emitted electrons drift inwards, leading to a low thrust efficiency. Simulations demonstrate that this is related to large energy losses in the chamber (up to 65% of the total power), which are shown to be due mainly to an extended wall region with large secondary electron emission. Alternatives for modeling the electron energy equation and its boundary conditions to reproduce the plasma cooling in the plume are discussed and their effects on the electron current topology are commented.
- 1 April 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (4) , 045013
A study of Xe metastable neutrals in an electrodeless plasma thruster discharge
An axisymmetric hybrid particle/fluid code is used to study the effects of the Xe long-lifetime metastables 1 s 5 and 1 s 3 in an electrodeless plasma thruster discharge. Simulated plasma chemistry includes metastables population, depopulation, and internal exchange through direct electron impact processes together with spontaneous radiative decay from 2 p states and resonant states 1 s 4 and 1 s 2 . Stepwise ionization from metastables and de-excitation at walls are also incorporated. Simulations are run for various absorbed powers and mass flows. Exchange rate from 1 s 3 to 1 s 5 is very high, making the role of 1 s 3 in ion production negligible. At low electron temperatures associated with low power–mass flow ratios, excitation becomes more frequent and the contribution of stepwise ionization to ion production is no more negligible. However, collisional de-excitation is also strong and often exceeds stepwise ionization, limiting a more relevant impact. In addition, roughly half of the apparent contribution of stepwise ionization arises from a shift of the ionization pathway from direct to stepwise channels. Consequently, the net increase in ion production, and the associated improvement in propellant utilization and thrust efficiency remain modest. Due to efficient depopulation mechanisms, the 1 s 5 density is very small compared with that of ground state neutrals, but it affects near infrared emissions used in optical emission spectroscopy. The simulated 1 s 5 /ground-state density ratio is compared with that obtained from the widely adopted local production balance assumption, which neglects convection. The analysis shows that this approximation is reasonable in a region close to the axis, but may fail at large radial positions, where convective effects become important, and thereby may introduce larger uncertainties in diagnostic interpretations.
- 1 April 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (4) , 045013
A study of Xe metastable neutrals in an electrodeless plasma thruster discharge
An axisymmetric hybrid particle/fluid code is used to study the effects of the Xe long-lifetime metastables 1 s 5 and 1 s 3 in an electrodeless plasma thruster discharge. Simulated plasma chemistry includes metastables population, depopulation, and internal exchange through direct electron impact processes together with spontaneous radiative decay from 2 p states and resonant states 1 s 4 and 1 s 2 . Stepwise ionization from metastables and de-excitation at walls are also incorporated. Simulations are run for various absorbed powers and mass flows. Exchange rate from 1 s 3 to 1 s 5 is very high, making the role of 1 s 3 in ion production negligible. At low electron temperatures associated with low power–mass flow ratios, excitation becomes more frequent and the contribution of stepwise ionization to ion production is no more negligible. However, collisional de-excitation is also strong and often exceeds stepwise ionization, limiting a more relevant impact. In addition, roughly half of the apparent contribution of stepwise ionization arises from a shift of the ionization pathway from direct to stepwise channels. Consequently, the net increase in ion production, and the associated improvement in propellant utilization and thrust efficiency remain modest. Due to efficient depopulation mechanisms, the 1 s 5 density is very small compared with that of ground state neutrals, but it affects near infrared emissions used in optical emission spectroscopy. The simulated 1 s 5 /ground-state density ratio is compared with that obtained from the widely adopted local production balance assumption, which neglects convection. The analysis shows that this approximation is reasonable in a region close to the axis, but may fail at large radial positions, where convective effects become important, and thereby may introduce larger uncertainties in diagnostic interpretations.
- Open Access
- 3 September 2025
- Published by Springer Nature in Journal of Electric Propulsion
- Vol. 4 (1) , 1-23
Data-driven analysis of anomalous transport and three-wave-coupling effects in an $E \times B$ plasmaThe collisionless cross-field electron transport in an $$E\times B$$ plasma configuration, representative of a Hall thruster, is studied using bispectral analysis on the data of a fully-kinetic simulation. The nonlinear, in-phase interaction of the oscillations of the azimuthal electric field and the electron density, both tied to the fundamental electron cyclotron drift instability (ECDI) mode, is found to be the main driver of electron transport. Higher-wavenumber ECDI modes do not drive anomalous transport directly; however, they are nonlinearly coupled with each other and with the fundamental ECDI mode. In addition, there is a smaller contribution from a lower-wavenumber mode, not predicted by linear ECDI theory. A reduced model obtained by sparse regression of the data suggests the existence of an inverse energy cascade from the higher ECDI modes to the fundamental one, which would mean that these modes do contribute to transport, albeit indirectly.- 3 September 2025
- Published by Springer Nature in Journal of Electric Propulsion
- Vol. 4 (1) , 1-23
Open AccessData-driven analysis of anomalous transport and three-wave-coupling effects in an $E \times B$ plasmaThe collisionless cross-field electron transport in an $$E\times B$$ plasma configuration, representative of a Hall thruster, is studied using bispectral analysis on the data of a fully-kinetic simulation. The nonlinear, in-phase interaction of the oscillations of the azimuthal electric field and the electron density, both tied to the fundamental electron cyclotron drift instability (ECDI) mode, is found to be the main driver of electron transport. Higher-wavenumber ECDI modes do not drive anomalous transport directly; however, they are nonlinearly coupled with each other and with the fundamental ECDI mode. In addition, there is a smaller contribution from a lower-wavenumber mode, not predicted by linear ECDI theory. A reduced model obtained by sparse regression of the data suggests the existence of an inverse energy cascade from the higher ECDI modes to the fundamental one, which would mean that these modes do contribute to transport, albeit indirectly. - Open Access
- 1 August 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (8) , 085004
Modeling of a Hall thruster plume: influence of plume boundary conditions and size, and cathode location
The current-free plasma plume of a Hall effect thruster is investigated through a 2D axisymmetric hybrid (particle-in-cell/fluid) model and code. First, since the simulated plume is necessarily finite, attention is paid to the boundary conditions at the plume boundary P. A novel global plume condition (GPC) model, which directly imposes the global current-free condition at P and determines the potential far downstream, is implemented. This is compared with the widely used local plume condition (LPC) model, which over-forces the current-free condition by imposing zero current density locally at P, thus artificially distorting plasma plume characteristics. Second, the influence of the cathode location on plume characteristics, electron current paths, and the cathode-to-plume coupling voltage is studied in detail. Configurations with centrally and laterally-mounted cathodes are compared. Central cathodes have better discharge performance due to the improved cathode-beam coupling. Laterally-mounted cathodes behave very differently depending on whether they are located inside or outside a magnetic separatrix (MS) surface, generally present in the plume. MS-external cathodes present much worse cathode-plume coupling. These trends with the cathode location are in line with previous experimental and numerical studies. Finally, the influence of the plume size has been assessed within all the above studies: the GPC, with a much better physical basis than the LPC, makes the plume solution less dependent on plume size; and the MS-external lateral cathodes are more affected by plume sizes and thus require working with larger plume domains.
- 1 August 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (8) , 085004
Open AccessModeling of a Hall thruster plume: influence of plume boundary conditions and size, and cathode location
The current-free plasma plume of a Hall effect thruster is investigated through a 2D axisymmetric hybrid (particle-in-cell/fluid) model and code. First, since the simulated plume is necessarily finite, attention is paid to the boundary conditions at the plume boundary P. A novel global plume condition (GPC) model, which directly imposes the global current-free condition at P and determines the potential far downstream, is implemented. This is compared with the widely used local plume condition (LPC) model, which over-forces the current-free condition by imposing zero current density locally at P, thus artificially distorting plasma plume characteristics. Second, the influence of the cathode location on plume characteristics, electron current paths, and the cathode-to-plume coupling voltage is studied in detail. Configurations with centrally and laterally-mounted cathodes are compared. Central cathodes have better discharge performance due to the improved cathode-beam coupling. Laterally-mounted cathodes behave very differently depending on whether they are located inside or outside a magnetic separatrix (MS) surface, generally present in the plume. MS-external cathodes present much worse cathode-plume coupling. These trends with the cathode location are in line with previous experimental and numerical studies. Finally, the influence of the plume size has been assessed within all the above studies: the GPC, with a much better physical basis than the LPC, makes the plume solution less dependent on plume size; and the MS-external lateral cathodes are more affected by plume sizes and thus require working with larger plume domains.
- 1 August 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (8) , 085007
An axisymmetric hybrid model of the plasma in a radio-frequency ion thruster chamber
An axisymmetric hybrid particle/fluid code has been applied to simulate the plasma behavior in the discharge chamber of a radio-frequency ion thruster (RIT). Suitable assumptions have been made to include the coupling with the three other elements of the thruster: the time-averaged deposited power from the radio-frequency (RF) source, the effective transparencies for ion and neutral extraction from the grid system, and the electrical connection with the external neutralizer. A detailed parametric analysis has been carried out in terms of deposited RF power and injected mass flow rate of xenon. As the RF power increases: high propellant utilization and ion beam current are obtained, the maximum plasma density moves away from the chamber center and close to the flow injector, and the beam-to-total energy efficiency decreases. As a result, for a given mass flow rate, there is an optimal RF power that maximizes the thrust efficiency. At these conditions, about 60% of the RF deposited power is lost into the walls due to the lack of magnetic confinement and multiple re-ionizations of wall-recombined neutrals penalize the inelastic losses too. Additional studies have analyzed the influence of: the electrical connections to the neutralizer, which just change the electron current paths; the effective transparency of the grids, where a large sensitivity is found to the ion transparency; the reduction of the energy accommodation of heavy species after wall impact, which penalizes much the maximum thrust efficiency; the presence of metastable atoms and stepwise ionization, which although present, have marginal effects on performances as a result of the multiple wall interactions. A global model, derived from the 2D model and constituted of algebraic expressions, can yield the main performance figures and averaged plasma magnitudes in the chamber with a relative error of up to ± 15%. Finally, 2D simulations are compared indirectly with existing data for a RIT-4.
- 1 August 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (8) , 085007
An axisymmetric hybrid model of the plasma in a radio-frequency ion thruster chamber
An axisymmetric hybrid particle/fluid code has been applied to simulate the plasma behavior in the discharge chamber of a radio-frequency ion thruster (RIT). Suitable assumptions have been made to include the coupling with the three other elements of the thruster: the time-averaged deposited power from the radio-frequency (RF) source, the effective transparencies for ion and neutral extraction from the grid system, and the electrical connection with the external neutralizer. A detailed parametric analysis has been carried out in terms of deposited RF power and injected mass flow rate of xenon. As the RF power increases: high propellant utilization and ion beam current are obtained, the maximum plasma density moves away from the chamber center and close to the flow injector, and the beam-to-total energy efficiency decreases. As a result, for a given mass flow rate, there is an optimal RF power that maximizes the thrust efficiency. At these conditions, about 60% of the RF deposited power is lost into the walls due to the lack of magnetic confinement and multiple re-ionizations of wall-recombined neutrals penalize the inelastic losses too. Additional studies have analyzed the influence of: the electrical connections to the neutralizer, which just change the electron current paths; the effective transparency of the grids, where a large sensitivity is found to the ion transparency; the reduction of the energy accommodation of heavy species after wall impact, which penalizes much the maximum thrust efficiency; the presence of metastable atoms and stepwise ionization, which although present, have marginal effects on performances as a result of the multiple wall interactions. A global model, derived from the 2D model and constituted of algebraic expressions, can yield the main performance figures and averaged plasma magnitudes in the chamber with a relative error of up to ± 15%. Finally, 2D simulations are compared indirectly with existing data for a RIT-4.
- Open Access
Data-driven analysis of anomalous transport and three-wave-coupling effects in E x B plasma discharges
Collisionless cross-field electron transport in an E x B configuration relevant for electric propulsion is studied using data from a (z, θ) full-PIC simulation. Higher-order spectral analysis shows that transport is dominated by the in-phase interaction of the oscillations of the azimuthal electric field and the electron density associated to the first electron cyclotron drift instability (ECDI) mode. A secondary contribution emanates from a lower-frequency mode, not predicted by linear ECDI theory, while higher modes have a minor direct impact on transport. However, a bicoherence analysis reveals that strong phase couplings exist among the ECDI modes, and a sparse symbolic regression spectral model, based on the three-wave coupling equations, suggests an inverse energy cascade as the most likely explanation, thus suggesting that higher modes contribute indirectly to transport by quadratic power transfer to the first mode. This work provides new insights into the dynamics of anomalous plasma transport in E x B sources and the underlying processes governing energy distribution across different scales, and supports the validity of weak turbulence theory to examine their behavior.
Open AccessData-driven analysis of anomalous transport and three-wave-coupling effects in E x B plasma discharges
Collisionless cross-field electron transport in an E x B configuration relevant for electric propulsion is studied using data from a (z, θ) full-PIC simulation. Higher-order spectral analysis shows that transport is dominated by the in-phase interaction of the oscillations of the azimuthal electric field and the electron density associated to the first electron cyclotron drift instability (ECDI) mode. A secondary contribution emanates from a lower-frequency mode, not predicted by linear ECDI theory, while higher modes have a minor direct impact on transport. However, a bicoherence analysis reveals that strong phase couplings exist among the ECDI modes, and a sparse symbolic regression spectral model, based on the three-wave coupling equations, suggests an inverse energy cascade as the most likely explanation, thus suggesting that higher modes contribute indirectly to transport by quadratic power transfer to the first mode. This work provides new insights into the dynamics of anomalous plasma transport in E x B sources and the underlying processes governing energy distribution across different scales, and supports the validity of weak turbulence theory to examine their behavior.
- Open Access
A study of an air-breathing electrodeless plasma thruster discharge
Plasma chemistry of main air components is implemented in a hybrid 2D axisymmetric simulation code to assess the air-breathing concept in an electrodeless plasma thruster. Relevant electron-heavy species collisions for diatomic molecules are included: rotational and vibrational excitation, dissociation and dissociative ionization. Plasma-wall interaction giving rise to associative recombination of atomic species into molecular species is included too. As reference, the plasma thruster is operated with Xe, at a power of 300W and a mass flow of 1mg/s. Simulations are run by injecting 1mg/s of N$_2$ and O independently for powers between 100 and 3000W. The performances and trends of plasma response for these propellants are similar to Xe, but displaced to powers between 1250 and 2000W. At optimum power, the thrust efficiency for N$_2$ and O surpasses that of Xe, due to the excess of re-ionization for Xe. Performances of 50/50 mixtures of N$_2$/O, which are a realistic composition in the ionosphere, are found to be linear combinations of the performances of each propellant. Performances using O$_2$, which could be generated from associative recombination of O at the intake, are very similar to those of the atomic oxygen.
Open AccessA study of an air-breathing electrodeless plasma thruster discharge
Plasma chemistry of main air components is implemented in a hybrid 2D axisymmetric simulation code to assess the air-breathing concept in an electrodeless plasma thruster. Relevant electron-heavy species collisions for diatomic molecules are included: rotational and vibrational excitation, dissociation and dissociative ionization. Plasma-wall interaction giving rise to associative recombination of atomic species into molecular species is included too. As reference, the plasma thruster is operated with Xe, at a power of 300W and a mass flow of 1mg/s. Simulations are run by injecting 1mg/s of N$_2$ and O independently for powers between 100 and 3000W. The performances and trends of plasma response for these propellants are similar to Xe, but displaced to powers between 1250 and 2000W. At optimum power, the thrust efficiency for N$_2$ and O surpasses that of Xe, due to the excess of re-ionization for Xe. Performances of 50/50 mixtures of N$_2$/O, which are a realistic composition in the ionosphere, are found to be linear combinations of the performances of each propellant. Performances using O$_2$, which could be generated from associative recombination of O at the intake, are very similar to those of the atomic oxygen.
- Open Access
- 1 October 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (10) , 105013
Analysis of a cusped helicon plasma thruster discharge
Experiments and simulations are used to analyze a compact helicon plasma thruster with a cusp in its internal magnetic field. The former rely on a compensated Langmuir probe and a Faraday cup, while the latter employ a hybrid PIC/fluid transport model combined with a frequency-domain electromagnetic field model. Measurements serve to tune the anomalous transport parameters of the model and overall show the same trends as the numerical results, including a secondary peak of electron temperature downstream in the magnetic nozzle, where electron cyclotron resonance conditions for the 13.56 MHz excitation frequency are met. The cusp plays a central role in determining the plasma losses to the walls and the profile of electron temperature, which in turn defines the excitation and ionization losses. While losses to the rear wall are reduced, losses to the lateral wall are increased, which, together with the low production efficiency, limit the performance of the device.
- 1 October 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (10) , 105013
Open AccessAnalysis of a cusped helicon plasma thruster discharge
Experiments and simulations are used to analyze a compact helicon plasma thruster with a cusp in its internal magnetic field. The former rely on a compensated Langmuir probe and a Faraday cup, while the latter employ a hybrid PIC/fluid transport model combined with a frequency-domain electromagnetic field model. Measurements serve to tune the anomalous transport parameters of the model and overall show the same trends as the numerical results, including a secondary peak of electron temperature downstream in the magnetic nozzle, where electron cyclotron resonance conditions for the 13.56 MHz excitation frequency are met. The cusp plays a central role in determining the plasma losses to the walls and the profile of electron temperature, which in turn defines the excitation and ionization losses. While losses to the rear wall are reduced, losses to the lateral wall are increased, which, together with the low production efficiency, limit the performance of the device.
- 1 April 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (4) , 045021
Magnetized fluid electron model within a two-dimensional hybrid simulation code for electrodeless plasma thrusters
An axisymmetric fluid model for weakly-collisional, magnetized electrons is introduced and coupled to a particle-in-cell model for heavy species to simulate electrodeless plasma thrusters. The numerical treatment of the model is based on a semi-implicit time scheme, and specific algorithms for solving on a magnetic field aligned mesh. Simulation results of the plasma transport are obtained for a virtual electrodeless thruster. The particle and energy fluxes of electrons are discussed. A first phenomenological model is included for the anomalous cross-field electron transport, and a second one for the anomalous parallel-field electron cooling in the plume. The balances of the plasma properties reveal that wall losses are the crucial reason for the poor thrust efficiency of these thrusters. The magnetic thrust inside the source could be negative and largely depending on the location of the magnetic throat, which is found uncoupled from the location of the plasma beam sonic surface. Furthermore, a sensitivity analysis of the results against the simulated plume extension shows that finite plumes imply an incomplete electron expansion, which leads to underestimating the performances.
- 1 April 2022
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 31 (4) , 045021
Magnetized fluid electron model within a two-dimensional hybrid simulation code for electrodeless plasma thrusters
An axisymmetric fluid model for weakly-collisional, magnetized electrons is introduced and coupled to a particle-in-cell model for heavy species to simulate electrodeless plasma thrusters. The numerical treatment of the model is based on a semi-implicit time scheme, and specific algorithms for solving on a magnetic field aligned mesh. Simulation results of the plasma transport are obtained for a virtual electrodeless thruster. The particle and energy fluxes of electrons are discussed. A first phenomenological model is included for the anomalous cross-field electron transport, and a second one for the anomalous parallel-field electron cooling in the plume. The balances of the plasma properties reveal that wall losses are the crucial reason for the poor thrust efficiency of these thrusters. The magnetic thrust inside the source could be negative and largely depending on the location of the magnetic throat, which is found uncoupled from the location of the plasma beam sonic surface. Furthermore, a sensitivity analysis of the results against the simulated plume extension shows that finite plumes imply an incomplete electron expansion, which leads to underestimating the performances.