MSMegersa Wodajo Shura

Megersa Wodajo Shura

*This is an algorithmically generated author record based on publicly available information.

Megersa Wodajo Shura has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Decoupling the chemical potential for explicit dopant and band statistics in p-type gallium arsenide

    by Megersa Wodajo Shura

    Conventional dopant statistics in semiconductors rely on transcendental equations that implicitly couple the densities of acceptor ionization,Na−, and holes occupancy,pa, to the acceptor chemical potential,Eμ−, limiting analytical insight. We present a theoretical framework that fully decouples these quantities in p-type GaAs, yielding explicit closed-form expressions forNa−,pa, and Eμ− in terms of a single dimensionless parameter,Qa. The temperature dependence of these quantities clearly delineates freeze-out, partial-ionization, and complete-ionization regimes, while the interplay of Na− with the intrinsic carrier density partitions majority-carrier,p0, behavior into extrinsic, quasi-intrinsic, and intrinsic domains. The analytic form of Eμ− resolves its long-standing confusion with the global Fermi level,EF. In systems with two-acceptor levels, overlapping ionizations produce distinct plateaus in the net ionization and chemical-potential curves. In highly compensated material, competing donor–acceptor effects generate a weakly non-monotonic ionization profile, elevated net value of Eμ− above that of a single acceptor, and contract the extrinsic regime while expanding the intrinsic one. These closed-form expressions furnish a transparent and powerful foundation for interpreting the temperature-dependent electronic properties of semiconductors over wide thermal and doping ranges.

  • Open Access

    Novel activated carbon derived from tomato waste and its composite with MoS2 for quantum dot sensitized solar cells

    by Bayisa Batu Kasaye, Megersa Wodajo Shura, Solomon Truneh Dibaba

    In this study, a novel multifunctional nanocomposite was developed by integrating molybdenum disulfide (MoS2) with activated carbon (AC) derived from tomato waste, utilizing both sustainable pyrolysis (ACF) and hydrothermal (ACH) synthesis methods. The surface areas of ACF and ACH were determined to be 480.044 and 385.883 m2/g, respectively. ACF exhibited superior structural characteristics, including higher porosity and a wider interlayer spacing (21.88°, d = 0.41 nm), compared to ACH (24.65°, d = 0.36 nm). Upon compositing ACH with MoS2, enhanced graphitization and improved electrical conductivity were observed, as indicated by a distinct XRD peak at 26.27° (d = 0.33 nm) and significant photoluminescence quenching. SEM analysis revealed a porous, sheet-like morphology for ACH, while BET confirmed its mesoporous structure and an increased active surface area of 460.93 m2/g. These attributes facilitate rapid ion diffusion and efficient electron transport, making the MoS2/ACH composite an excellent candidate for quantum dot-sensitized solar cells (QDSSCs). In addition, the nanocomposite was employed as a counter electrode in QDSSCs, exhibiting notable enhancements in power conversion efficiency. Electrochemical impedance spectroscopy demonstrated improved charge transfer kinetics, with reductions in series resistance (Rs) from 11.41 for ACF to 4.38 Ω for ACF/1T-MoS2 and charge transfer resistance (Rct), which dropped from 1202 to 178 Ω for ACF and AC/1T-MoS2, respectively. Cyclic voltammetry indicated excellent electrochemical stability, as evidenced by consistent curve shapes across multiple cycles. The synergistic interaction between the porous carbon matrix and MoS2 nanosheets underpins the material’s superior performance in renewable energy applications.

  • Open Access

    Effect of Lanthanum Doping on the Superconducting Properties of Yttrium Hydrogen Selenide: Insights From First‐Principles Study

    by Tadesse Bekele Aredo, Megersa Wodajo Shura, Kumneger Tadele, Mesfin Asfaw Afrassa, Fekadu Tolessa Maremi

    This study investigates the structural, electronic, magnetic, phonon, and superconducting properties of lanthanum (La)‐doped yttrium hydrogen selenide using density functional theory (DFT) in combination with the phonopy package. Structural analysis reveals that La doping induces lattice expansion in YHSe. The electronic structure calculations reveal that La doping modifies both the bandgap and the electronic density of states (DOS), indicating significant changes in the electronic properties. Magnetic analysis shows that both pristine and La‐doped YHSe systems are nonmagnetic, with no atomic contributions to the overall magnetic moment. Analysis of the phonon dispersions and DOS across varying La concentrations reveals pronounced shifts in vibrational modes, especially in the low‐frequency region. This behavior is attributed to the larger atomic mass of La relative to Y, Se, and H, which enhances the phonon DOS (PDOS) at lower frequencies. Furthermore, La incorporation softens both optical and acoustic phonon branches, suggesting weakened interatomic bonding. The superconducting properties, evaluated through electron–phonon coupling (EPC) ( λ ) calculations, indicate an enhancement in the critical temperature ( T c ) and coupling strength up to 0.5 La concentrations. For all four alloys, λ increases with La doping initially, reaching its maximum before slightly decreasing at higher concentrations. The highest observed T c values range from 28.321 to 39.861 K, with the EPC varying from 0.8267 to 1.3774 at optimal doping levels. The estimated superconducting critical temperatures are 28.321 K for YHSe, 35.399 K for La 0.3 Y 0.7 HSe, and 39.681 K for La 0.5 Y 0.5 HSe, highlighting that doping is an effective strategy for enhancing transition temperatures in this material class without requiring high external pressure. These results highlight the potential of La‐doped YHSe for thermoelectric applications due to its tunable phonon characteristics and reduced thermal conductivity.


  • Open Access

    First‐Principles Calculations to Investigate Structural, Electronic, Mechanical, Optical, and Magnetic Properties of RhNbSb Half‐Heusler Compound

    by Adem Beriso Bejo, Megersa Wodajo Shura, Kumneger Tadele, Fekadu Tolessa Maremi, Mesfin Asfaw Afrassa, Kunsa Haho Habura

    In this work, the structural, mechanical, electronic, optical and magnetic properties of the RhNbSb half‐Heusler compound were examined and analyzed using density functional theory (DFT). According to the results, type I atomic arrangement is structurally the most stable for the compound. In all three of its atomic arrangement types, the compound is mechanically stable and ductile according to the analysis of its mechanical properties. Generalized gradient approximation (GGA) + U approach was applied in addition to GGA approach, where U is Hubbard parameter, to increase the accuracy of results in electronic band structure, density of states (DOS), and magnetic moments. Therefore, electronic band structure and DOS calculations demonstrate that the compound exhibits metallic properties in both its type I and type II atomic arrangements with GGA predictions. However, under GGA + U calculations, the compound becomes half metal when in type I but it still reflects metallic nature when in type II. The compound’s half‐metallic nature in type I under the GGA+ U method suggests that it may be a good fit for spintronics applications in this type I of its atomic arrangement. The calculated total magnetic moment of the compound under GGA + U approach exactly fits with Slater–Pauling rule of half‐metallic nature in its type I atomic arrangement, a result that supports half‐metallic nature of the compound in type I atomic arrangement for electronic properties under GGA + U prediction. Furthermore, the compound might be taken into consideration for optoelectronic applications according to the results of computed optical characteristics.


  • Open Access

    Density functional theory study of cobalt sulfide as a counter electrode material for dye-sensitized solar cells

    by Dereje Gelanu Dadi, Megersa Wodajo Shura, Fekadu Gochole

    Dye-sensitized solar cells (DSSCs) are viewed as potential substitutes for traditional silicon-based solar cells due to their affordability, impressive performance in low-light conditions, eco-friendly energy production, and adaptability in solar product integration. The use of noble metals such as platinum as counter electrodes in DSSCs was initially limited by their high cost; however, cobalt sulfide has been recognized as a viable alternative due to its abundance, non-toxic properties, and cost-effectiveness. In this work, the crystal structure, electronic, optical characteristics and electrocatalytic activity of the tetragonal phases of cobalt sulfide are investigated through density functional theory with a quantum espresso package. The results obtained for the lattice parameter are a = b = 3.53 Å and c = 4.80 Å. The generalized gradient approximation and hybrid exchange correlation function yield bandgaps of 1.63 and 1.69 eV, respectively, which are consistent with the reported experimental values. An analysis of the density of states and the projected density was carried out to validate the accuracy of the calculated band gaps. Additionally, significant information was obtained from the optical properties through the calculation of the dielectric function. The findings reveal real and imaginary static dielectric constants of 11.85 and 0.13, respectively. Furthermore, the measured absorption and conductivity spectra exhibit promising attributes in the UV–visible range and good electrical conductivity. Moreover, the electrocatalytic activity was studied to analyze the adsorption energy of CoS and the electrolyte. Generally, the calculated electronic and optical properties of CoS crystals indicate their potential application as counter electrodes in dye-sensitized solar cells.


  • Open Access

    Effect of nickel and selenium co-doping on molybdenum disulfide structure and its electrochemical activity in polysulfide electrolyte

    by Bayisa Batu Kasaye, Megersa Wodajo Shura, Solomon Tiruneh Dibaba

    The development of a low-cost, and highly effective platinum (Pt)-free counter electrode (CE) that is highly stable towards polysulfide electrolyte presents a substantial challenge. Trigonal Molybdenum disulfide (1T-MoS2) has shown good chemical stability toward polysulfide electrolytes. In this study, 1T-MoS2 was prepared by co-doping with nickel (Ni) and selenium (Se) into MoS2 through hydrothermal method and utilizing its reduction activity toward polysulfide electrolyte. According to electrochemical impedance spectroscopy (EIS) analysis, Ni-Se-MoS2 has a low charge transfer resistance and electron recombination lifetime. In addition, cyclic voltmeter (CV) analysis reveals a high absolute area indicating a high level of electrocatalytic activity for polysulfide reduction at the electrolyte/counter electrode (CE) interface. The XRD analysis shows that the phase shifting of 2H MoS2 to 1 T MoS2 and the intensity of the co-doped sample is lower than that of others. SEM analysis reveals a microsphere-flower-like morphology that increases specific surface area.


  • Open Access

    The Effect of Pressure Variations on the Electronic Structure, Phonon, and Superconducting Properties of Yttrium Hydrogen Selenide Compound

    by Tadesse Bekele Aredo, Megersa Wodajo Shura, Mesfin Asfaw Afrassa, Kumneger Tadele, Fekadu Tolessa Maremi

    The electronic, phonon, and superconducting properties of hexagonal yttrium hydrogen selenide (YHSe) are studied using density functional theory (DFT) methods. The DFT analysis revealed that the energy bandgap and density of states near the Fermi energy (ɛF) decrease with increasing pressure. Additionally, the influence of pressure on the vibrational properties of YHSe is also examined. The findings of the vibrational properties indicate a stiffening of lattice dynamics under pressure and the identification of negative Gruneisen parameters at certain high symmetry sites. This enhances and deepens the understanding of the vibrational characteristics of YHSe under extreme pressure conditions. Finally, the electronphonon coupling (EPC) parameter (λ) is examined under different pressures. The examination of EPCs across varying pressures showed a significant increase from 0.826 (0GPa) to 2.6287 (200GPa), where an increase in this EPC is found to increase the superconducting critical temperature (Tc). Furthermore, the nonmonotonic relationship between the superconducting critical temperature (Tc) and external pressure (P) in the YHSe compound is observed. Initially, Tc decreases with increasing pressure and then begins to rise again, reaching its peak value at extreme pressure. These findings provide valuable insights into the pressure-dependent properties of YHSe and have important implications for the field of superconductivity in condensed matter physics.


  • Open Access

    Review of recent progress in the development of electrolytes for Cd/Pb-based quantum dot-sensitized solar cells: performance and stability

    by Bayisa Batu Kasaye, Megersa Wodajo Shura, Solomon Tiruneh Dibaba

    QDSSCs owing the ability to generate multiple electron–hole pairs per photon, high stability under light and moisture exposure, and flexibility in size and composition tuning.


  • Open Access

    Doping and Pressure Effects on Yttrium Hydrogen Selenide

    by Tadesse Bekele Aredo, Megersa Wodajo Shura, Mesfin Asfaw Afrassa, Kumneger Tadele, Fekadu Tolessa Maremi, Kunsa Haho Habura

    In this paper, the structural, electronic, phonon, and optical properties of lanthanum (La)‐doped yttrium hydrogen selenide (YHSe), along with the effects of pressure variations on its optical properties, are investigated using the density functional theory method. Both the La‐doped and YHSe systems are dynamically stable, as indicated by phonon calculations showing no imaginary frequencies in the Brillouin zone (BZ). The influence of pressure on optical properties is examined, revealing that increased pressure enhances these properties, particularly by improving the absorption coefficient in the ultraviolet (UV) range. Moreover, the bandgap energy of both La‐doped YHSe and YHSe compounds is explored. Increasing La concentration reduces the bandgap and enhances the density of states (DOS) at Fermi energy, inducing metallic characteristics in YHSe. Furthermore, the optical properties are examined at various La concentrations, most of which exhibit a nonlinear relationship as the La concentration increases. Doping under extreme conditions significantly enhances the optical properties of La‐doped YHSe, particularly in the UV‐light wavelength range. Specifically, the absorption coefficient reaches its maximum value in the energy range of 6.678 −13.023 eV within the UV region for all concentrations, indicating strong absorption in this range. This suggests the material’s effectiveness in absorbing electromagnetic radiation, particularly in the UV range, making it a promising candidate for photochromic applications. A thorough exploration of the optical properties under doping reveals prominent peaks, particularly in response to the UV spectrum, with a slight shift toward higher energies beyond the UV range. This suggests that the material under study holds promise as a candidate for sustained photochromic performance over time.


  • Top Cited Papers
    Open Access

    Experimental and computational study of metal oxide nanoparticles for the photocatalytic degradation of organic pollutants: a review

    by Fikadu Takele Geldasa, Mesfin Abayneh Kebede, Megersa Wodajo Shura, Fekadu Gashaw Hone

    Photocatalysis is a more proficient technique that involves the breakdown or decomposition of different organic contaminants, various dyes, and harmful viruses and fungi using UV or visible light solar spectrum. Metal oxides are considered promising candidate photocatalysts owing to their low cost, efficiency, simple fabricating method, sufficient availability, and environment-friendliness for photocatalytic applications. Among metal oxides, TiO2 is the most studied photocatalyst and is highly applied in wastewater treatment and hydrogen production. However, TiO2 is relatively active only under ultraviolet light due to its wide bandgap, which limits its applicability because the production of ultraviolet is expensive. At present, the discovery of a photocatalyst of suitable bandgap with visible light or modification of the existing photocatalyst is becoming very attractive for photocatalysis technology. However, the major drawbacks of photocatalysts are the high recombination rate of photogenerated electron–hole pairs, the ultraviolet light activity limitations, and low surface coverage. In this review, the most commonly used synthesis method for metal oxide nanoparticles, photocatalytic applications of metal oxides, and applications and toxicity of different dyes are comprehensively highlighted. In addition, the challenges in the photocatalytic applications of metal oxides, strategies to suppress these challenges, and metal oxide studied by density functional theory for photocatalytic applications are described in detail.