Mojtaba Alaei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mojtaba Alaei has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Artem R. Oganov
Skolkovo Institute of Science and Technology, Moscow, Russia
6 shared publications Nafise Rezaei
Skolkovo Institute of Science and Technology, Bolshoy Boulevard 30, bld. 1, Moscow, 121205, Russia
6 shared publicationsHadi Akbarzadeh
4 shared publicationsMohammad Amirabbasi
Department of Physics, Isfahan University of Technology, Isfahan 84156-83111, Iran
3 shared publicationsMostafa Yaghoobi
3 shared publications- Nafise Rezaei
Skolkovo Institute of Science and Technology
3 shared publications
Latest Publications
- 29 September 2026
- Published by Elsevier in Materials Today Physics
- Vol. 68
From fidelity to modelability: Advancing electronic band gap prediction of materials with AI diagnostics
- 29 September 2026
- Published by Elsevier in Materials Today Physics
- Vol. 68
From fidelity to modelability: Advancing electronic band gap prediction of materials with AI diagnostics
- Open Access
- 24 July 2026
- Published by Springer Nature in Communications Materials
Complex magnetic behavior in RuO2 thin films driven by strain and substrate effects
- 24 July 2026
- Published by Springer Nature in Communications Materials
Open AccessComplex magnetic behavior in RuO2 thin films driven by strain and substrate effects
- Open Access
- 20 April 2026
- Published by Springer Nature in Research Square
Complex Magnetic Behavior in RuO2 Thin Films Driven by Strain and Substrate Effects
Ruthenium dioxide (RuO$_2$) has been proposed as a prototypical metallic $d$-wave altermagnet, a Néel-ordered compensated antiferromagnetic state exhibiting nonrelativistic momentum-dependent spin splitting; yet, its magnetic ground state remains controversial both theoretically and experimentally. Using comprehensive first-principles calculations, we investigate RuO$_2$ thin films with (110), (100), and (001) orientations, both (un)strained freestanding and supported on a TiO$_2$ substrate. We show that emergent magnetic moments in RuO$_2$ thin films are highly fragile, strongly influenced by strain, surface orientation, and atomic relaxation, while also being highly sensitive to the choice of the Brillouin-zone integration scheme. We find that none of the thin film structures considered can stabilize a compensated antiferromagnetic order; therefore, an altermagnetic ground state cannot be realized. Instead, substrate-supported RuO$_2$ films on TiO$_2$ exhibit pronounced layer- and site-dependent magnetic moment variations and incomplete compensation between the two antiferromagnetically coupled Ru moments, yielding a \emph{ferrimagnetic-like} behavior. On the other hand, freestanding RuO$_2$ films display complex magnetic structures depending on their orientation and applied strain, with distinct behavior at the surfaces and in the inner layers. Our results reconcile conflicting theoretical and experimental reports and underscore the sensitivity of RuO$_2$ magnetism to structural and methodological details.- 20 April 2026
- Published by Springer Nature in Research Square
Open AccessComplex Magnetic Behavior in RuO2 Thin Films Driven by Strain and Substrate Effects
Ruthenium dioxide (RuO$_2$) has been proposed as a prototypical metallic $d$-wave altermagnet, a Néel-ordered compensated antiferromagnetic state exhibiting nonrelativistic momentum-dependent spin splitting; yet, its magnetic ground state remains controversial both theoretically and experimentally. Using comprehensive first-principles calculations, we investigate RuO$_2$ thin films with (110), (100), and (001) orientations, both (un)strained freestanding and supported on a TiO$_2$ substrate. We show that emergent magnetic moments in RuO$_2$ thin films are highly fragile, strongly influenced by strain, surface orientation, and atomic relaxation, while also being highly sensitive to the choice of the Brillouin-zone integration scheme. We find that none of the thin film structures considered can stabilize a compensated antiferromagnetic order; therefore, an altermagnetic ground state cannot be realized. Instead, substrate-supported RuO$_2$ films on TiO$_2$ exhibit pronounced layer- and site-dependent magnetic moment variations and incomplete compensation between the two antiferromagnetically coupled Ru moments, yielding a \emph{ferrimagnetic-like} behavior. On the other hand, freestanding RuO$_2$ films display complex magnetic structures depending on their orientation and applied strain, with distinct behavior at the surfaces and in the inner layers. Our results reconcile conflicting theoretical and experimental reports and underscore the sensitivity of RuO$_2$ magnetism to structural and methodological details. - Open Access
- 19 November 2025
- Published by Springer Nature in Scientific Data
- Vol. 12 (1) , 1832
Experimental Exchange Interaction Dataset for Magnetic Materials: Spin Waves to MC Simulations
Inelastic neutron scattering (INS) provides direct insights into microscopic magnetic interactions in crystalline materials, making it a valuable experimental technique in condensed matter physics and materials science. These interactions can be extracted by fitting spin wave dispersions to Heisenberg Hamiltonians using spin wave theory. However, such datasets are scattered across the literature and lack a standardized format, which limits their accessibility, reproducibility, and utility. In this work, we compile and standardize exchange interaction data obtained from INS experiments on nearly 100 magnetic materials. The resulting dataset includes exchange parameters expressed in a unified Heisenberg model format, visualizations of crystal structures with annotated exchange pathways, and Monte Carlo simulation files generated using the ESpinS code. We use these experimentally derived exchange interactions to compute magnetic transition temperatures (Tc) via classical Monte Carlo simulations. Furthermore, we examine the impact of the (S + 1)/S correction in the simulations and find it improves agreement with experimental Tc values in most cases. All data and related resources are openly available through a public GitHub repository.
- 19 November 2025
- Published by Springer Nature in Scientific Data
- Vol. 12 (1) , 1832
Open AccessExperimental Exchange Interaction Dataset for Magnetic Materials: Spin Waves to MC Simulations
Inelastic neutron scattering (INS) provides direct insights into microscopic magnetic interactions in crystalline materials, making it a valuable experimental technique in condensed matter physics and materials science. These interactions can be extracted by fitting spin wave dispersions to Heisenberg Hamiltonians using spin wave theory. However, such datasets are scattered across the literature and lack a standardized format, which limits their accessibility, reproducibility, and utility. In this work, we compile and standardize exchange interaction data obtained from INS experiments on nearly 100 magnetic materials. The resulting dataset includes exchange parameters expressed in a unified Heisenberg model format, visualizations of crystal structures with annotated exchange pathways, and Monte Carlo simulation files generated using the ESpinS code. We use these experimentally derived exchange interactions to compute magnetic transition temperatures (Tc) via classical Monte Carlo simulations. Furthermore, we examine the impact of the (S + 1)/S correction in the simulations and find it improves agreement with experimental Tc values in most cases. All data and related resources are openly available through a public GitHub repository.
- 24 September 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (12)
1D transition metal oxide chains as a challenging model for ab initio calculations
Providing highly simplified models of strongly correlated electronic systems that challenge ab initio calculations can serve as a valuable testing ground to improve these methods. In this study, we present a comprehensive investigation of the structural, magnetic, and electronic properties of one-dimensional transition metal mono-oxide chains (VO, CrO, MnO, FeO, CoO, and NiO) using density functional theory (DFT), DFT+U, and coupled-cluster singles and doubles (CCSD) calculations. The Hubbard U parameter for DFT+U is determined using linear response theory. In all systems studied except MnO, the presence of multiple local minima—primarily due to the electronic degrees of freedom associated with the d-orbitals—leads to significant challenges for DFT, DFT+U, and Hartree–Fock methods in finding the global minimum in ab initio calculations. Our results indicate that the antiferromagnetic (AFM) state is energetically favored for all chains, except CrO, when using DFT+U and the Perdew–Burke–Ernzerhof (PBE) functional. Analysis of the band structures shows that while PBE often predicts metallic or half-metallic FM states, DFT+U opens band gaps and correctly yields insulating behavior in all cases. Furthermore, we compared the energy differences between the AFM and FM states using DFT+U and CCSD for CrO, MnO, FeO, CoO, and NiO. Our findings indicate that CCSD predicts larger energy differences in some cases compared to DFT+U, suggesting that the Hubbard U parameter obtained through linear response theory may be overestimated when used to calculate energy differences between different magnetic states. For CrO, CCSD predicts an AFM ground state, in contrast to the predictions from DFT+U and PBE methods.
- 24 September 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 163 (12)
1D transition metal oxide chains as a challenging model for ab initio calculations
Providing highly simplified models of strongly correlated electronic systems that challenge ab initio calculations can serve as a valuable testing ground to improve these methods. In this study, we present a comprehensive investigation of the structural, magnetic, and electronic properties of one-dimensional transition metal mono-oxide chains (VO, CrO, MnO, FeO, CoO, and NiO) using density functional theory (DFT), DFT+U, and coupled-cluster singles and doubles (CCSD) calculations. The Hubbard U parameter for DFT+U is determined using linear response theory. In all systems studied except MnO, the presence of multiple local minima—primarily due to the electronic degrees of freedom associated with the d-orbitals—leads to significant challenges for DFT, DFT+U, and Hartree–Fock methods in finding the global minimum in ab initio calculations. Our results indicate that the antiferromagnetic (AFM) state is energetically favored for all chains, except CrO, when using DFT+U and the Perdew–Burke–Ernzerhof (PBE) functional. Analysis of the band structures shows that while PBE often predicts metallic or half-metallic FM states, DFT+U opens band gaps and correctly yields insulating behavior in all cases. Furthermore, we compared the energy differences between the AFM and FM states using DFT+U and CCSD for CrO, MnO, FeO, CoO, and NiO. Our findings indicate that CCSD predicts larger energy differences in some cases compared to DFT+U, suggesting that the Hubbard U parameter obtained through linear response theory may be overestimated when used to calculate energy differences between different magnetic states. For CrO, CCSD predicts an AFM ground state, in contrast to the predictions from DFT+U and PBE methods.
- Open Access
Predicting the Curie Temperature of Magnetic Materials with Machine Learning: Descriptor Engineering, Graph Neural Networks, and the Role of Curated Data
Predicting the Curie temperature ($T_\mathrm{C}$) of magnetic materials is crucial for advancing applications in data storage, spintronics, and sensors. We present a machine learning (ML) framework to predict $T_{\mathrm{C}}$ using a curated dataset of 2,500 ferromagnetic compounds, employing two types of elemental descriptor-based features: one based on stoichiometry-weighted descriptors, and the other leveraging Graph Neural Networks (GNNs). CatBoost trained on the stoichiometry-weighted descriptors achieved an $R^2$ score of 0.87, while the use of GNN-based representations led to a further improvement, with CatBoost reaching an $R^2$ of 0.91, highlighting the effectiveness of graph-based feature learning. We also demonstrated that using an uncurated dataset available online leads to poor predictions, resulting in a low $R^2$ score of 0.66 for the CatBoost model. We analyzed feature importance using tools such as Recursive Feature Elimination (RFE), which revealed that ionization energies are a key physicochemical factor influencing $T_\mathrm{C}$. Notably, the use of only the first 10 ionization energies as input features resulted in high predictive accuracy, with $R^2$ scores of up to 0.85 for statistical models and 0.89 for the GNN-based approach. These results highlight that combining robust ML models with thoughtful feature engineering and high-quality data, can accelerate the discovery of magnetic materials. Our curated dataset is publicly available on GitHub.Open AccessPredicting the Curie Temperature of Magnetic Materials with Machine Learning: Descriptor Engineering, Graph Neural Networks, and the Role of Curated Data
Predicting the Curie temperature ($T_\mathrm{C}$) of magnetic materials is crucial for advancing applications in data storage, spintronics, and sensors. We present a machine learning (ML) framework to predict $T_{\mathrm{C}}$ using a curated dataset of 2,500 ferromagnetic compounds, employing two types of elemental descriptor-based features: one based on stoichiometry-weighted descriptors, and the other leveraging Graph Neural Networks (GNNs). CatBoost trained on the stoichiometry-weighted descriptors achieved an $R^2$ score of 0.87, while the use of GNN-based representations led to a further improvement, with CatBoost reaching an $R^2$ of 0.91, highlighting the effectiveness of graph-based feature learning. We also demonstrated that using an uncurated dataset available online leads to poor predictions, resulting in a low $R^2$ score of 0.66 for the CatBoost model. We analyzed feature importance using tools such as Recursive Feature Elimination (RFE), which revealed that ionization energies are a key physicochemical factor influencing $T_\mathrm{C}$. Notably, the use of only the first 10 ionization energies as input features resulted in high predictive accuracy, with $R^2$ scores of up to 0.85 for statistical models and 0.89 for the GNN-based approach. These results highlight that combining robust ML models with thoughtful feature engineering and high-quality data, can accelerate the discovery of magnetic materials. Our curated dataset is publicly available on GitHub. - Open Access
1D Transition Metal Oxide Chains as a Challenging Model for Ab Initio Calculations
Providing highly simplified models of strongly correlated electronic systems that challenge {\it ab initio} calculations can serve as a valuable testing ground to improve these methods. In this study, we present a comprehensive study of the structural, magnetic, and electronic properties of one-dimensional transition metal mono-oxide chains (VO, CrO, MnO, FeO, CoO, and NiO) using density functional theory (DFT), DFT+$U$, and coupled-cluster singles and doubles (CCSD) calculations. The Hubbard $U$ parameter for DFT+$U$ is determined using the linear response theory. In all systems studied except MnO, the presence of multiple local minima -- primarily due to the electronic degrees of freedom associated with the d-orbitals -- leads to significant challenges for DFT, DFT+U, and Hartree-Fock methods in finding the global minimum in ab initio calculations. Our results indicate that the antiferromagnetic (AFM) state is energetically favored for all chains, except CrO, when using DFT+$U$ and PBE. We analyze the electronic band structures and find that while the PBE approximation often predicts metallic or half-metallic ground states for the ferromagnetic (FM) state, DFT+$U$ approach successfully opens band gaps, correctly predicting insulating behavior in all cases. Furthermore, we compared the energy differences between the AFM and FM states using DFT+$U$ and CCSD for CrO, MnO, FeO, CoO and NiO. Our findings indicate that CCSD predicts larger energy differences in some cases compared to DFT+$U$, suggesting that the Hubbard $U$ parameter obtained through linear response theory may be overestimated when used to calculate energy differences between different magnetic states. For CrO, CCSD predicts an AFM ground state, in contrast to the predictions from DFT+$U$ and PBE methods.Open Access1D Transition Metal Oxide Chains as a Challenging Model for Ab Initio Calculations
Providing highly simplified models of strongly correlated electronic systems that challenge {\it ab initio} calculations can serve as a valuable testing ground to improve these methods. In this study, we present a comprehensive study of the structural, magnetic, and electronic properties of one-dimensional transition metal mono-oxide chains (VO, CrO, MnO, FeO, CoO, and NiO) using density functional theory (DFT), DFT+$U$, and coupled-cluster singles and doubles (CCSD) calculations. The Hubbard $U$ parameter for DFT+$U$ is determined using the linear response theory. In all systems studied except MnO, the presence of multiple local minima -- primarily due to the electronic degrees of freedom associated with the d-orbitals -- leads to significant challenges for DFT, DFT+U, and Hartree-Fock methods in finding the global minimum in ab initio calculations. Our results indicate that the antiferromagnetic (AFM) state is energetically favored for all chains, except CrO, when using DFT+$U$ and PBE. We analyze the electronic band structures and find that while the PBE approximation often predicts metallic or half-metallic ground states for the ferromagnetic (FM) state, DFT+$U$ approach successfully opens band gaps, correctly predicting insulating behavior in all cases. Furthermore, we compared the energy differences between the AFM and FM states using DFT+$U$ and CCSD for CrO, MnO, FeO, CoO and NiO. Our findings indicate that CCSD predicts larger energy differences in some cases compared to DFT+$U$, suggesting that the Hubbard $U$ parameter obtained through linear response theory may be overestimated when used to calculate energy differences between different magnetic states. For CrO, CCSD predicts an AFM ground state, in contrast to the predictions from DFT+$U$ and PBE methods. - 21 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (14)
Optimizing supercell structures for Heisenberg exchange interaction calculations
- 21 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (14)
Optimizing supercell structures for Heisenberg exchange interaction calculations
- 8 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (14)
Evaluating SCAN and meta-GGA functionals for predicting transition temperatures in antiferromagnetic materials- 8 April 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (14)
Evaluating SCAN and meta-GGA functionals for predicting transition temperatures in antiferromagnetic materials