Luca Massaro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Luca Massaro has a total of 109 co-authors. Here are the top co-authors by number of shared publications:
- Pher G. Andersson
Department of Organic Chemistry Stockholm University 10691 Stockholm Sweden
7 shared publications - Phil S. Baran
Department of Chemistry, Scripps Research, La Jolla, USA
7 shared publications - Yu Kawamata
Department of Chemistry, Scripps Research, La Jolla, USA
6 shared publications - Bram B. C. Peters
Department of Organic Chemistry Stockholm University 10691 Stockholm Sweden
4 shared publications - Jianping Yang
Department of Chemistry, Arrhenius Laboratory
4 shared publications - Flynn C. Attard
Research School of Chemistry, Australian National University, Canberra, ACT 2601, Australia
3 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Elsevier in Current Opinion in Green and Sustainable Chemistry
- Vol. 62
Recent advances in catalytic and electrocatalytic sustainable aviation fuel production
- 16 September 2026
- Published by Elsevier in Current Opinion in Green and Sustainable Chemistry
- Vol. 62
Open AccessRecent advances in catalytic and electrocatalytic sustainable aviation fuel production
- Open Access
- 21 August 2026
- Published by Elsevier in Current Opinion in Electrochemistry
- Vol. 60
Electrochemical hydrogenation of arenes and heteroarenes: Tuning partial and full reduction
- 21 August 2026
- Published by Elsevier in Current Opinion in Electrochemistry
- Vol. 60
Open AccessElectrochemical hydrogenation of arenes and heteroarenes: Tuning partial and full reduction
- 2 July 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (9) , 1310-1311
Electrophotocatalysis for direct vicinal dichlorination of carboxylic acids
- 2 July 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (9) , 1310-1311
Electrophotocatalysis for direct vicinal dichlorination of carboxylic acids
- 4 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 392 (6802) , 1075-1081
Stereoretentive radical-based alkyl-alkyl cross-coupling
The construction of stereogenic C(sp 3 )–C(sp 3 ) bonds through cross-coupling remains a formidable challenge owing to competing β-hydride elimination and homocoupling as well as the poor inherent stereocontrol of radical pathways. In this work, we report a scalable stereoretentive radical-radical cross-coupling of two distinct, transient alkyl radicals, derived from enantioenriched sulfonylhydrazides and achiral primary and secondary alkyl halides, achieved without chiral ligands, directing groups, or exogenous redox agents. This substrate-controlled approach leverages a nickel-catalyzed, redox-neutral manifold, which enables precise kinetic matching of diazene-mediated radical generation and halogen atom transfer. The reaction produced enantiospecificities of 80 to 96% and synthetically useful yields (up to 90%) across diverse piperidine and pyrrolidine scaffolds while tolerating ethers, free amines, aryl halides, heterocycles, olefins, and other sensitive motifs. Mechanistic studies support caged radical rebound at nickel to preserve chirality, followed by nickel(I)-nickel(III)–mediated radical capture and reductive elimination.
- 4 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 392 (6802) , 1075-1081
Stereoretentive radical-based alkyl-alkyl cross-coupling
The construction of stereogenic C(sp 3 )–C(sp 3 ) bonds through cross-coupling remains a formidable challenge owing to competing β-hydride elimination and homocoupling as well as the poor inherent stereocontrol of radical pathways. In this work, we report a scalable stereoretentive radical-radical cross-coupling of two distinct, transient alkyl radicals, derived from enantioenriched sulfonylhydrazides and achiral primary and secondary alkyl halides, achieved without chiral ligands, directing groups, or exogenous redox agents. This substrate-controlled approach leverages a nickel-catalyzed, redox-neutral manifold, which enables precise kinetic matching of diazene-mediated radical generation and halogen atom transfer. The reaction produced enantiospecificities of 80 to 96% and synthetically useful yields (up to 90%) across diverse piperidine and pyrrolidine scaffolds while tolerating ethers, free amines, aryl halides, heterocycles, olefins, and other sensitive motifs. Mechanistic studies support caged radical rebound at nickel to preserve chirality, followed by nickel(I)-nickel(III)–mediated radical capture and reductive elimination.
- Open Access
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (2) , 1264-1271
Asymmetric Hydrogenation of In Situ Generated β,γ-Unsaturated Lactams
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (2) , 1264-1271
Open AccessAsymmetric Hydrogenation of In Situ Generated β,γ-Unsaturated Lactams
- 11 November 2025
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (2) , 326-334
Triply convergent Ni-electrocatalytic assembly of 1,1-diaryl cyclobutanes, azetidines and oxetanes
The pursuit of increasingly complex, three-dimensional molecules is pushing the boundaries of modern organic synthesis, particularly in drug discovery where rigid, saturated scaffolds such as cyclobutanes, azetidines and oxetanes are in high demand. Here we outline a modular, scalable, chemoselective approach to solve this problem using simple α-bromoacids and aryl halides as intuitive starting materials. As demonstrated herein, a sequential series of nickel-electrocatalytic cross-couplings can be enlisted to enable rapid access to such structures, many of which have been nearly impossible to access before without recourse to time-consuming polar bond disconnections that are inherently limiting in terms of accessible chemical space. The scalability of this new reaction sequence is demonstrated, alongside direct applications to known patented structures. A simple user guide is also presented to accelerate adoption of this strategy in medicinal chemistry and related fields.
- 11 November 2025
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (2) , 326-334
Triply convergent Ni-electrocatalytic assembly of 1,1-diaryl cyclobutanes, azetidines and oxetanes
The pursuit of increasingly complex, three-dimensional molecules is pushing the boundaries of modern organic synthesis, particularly in drug discovery where rigid, saturated scaffolds such as cyclobutanes, azetidines and oxetanes are in high demand. Here we outline a modular, scalable, chemoselective approach to solve this problem using simple α-bromoacids and aryl halides as intuitive starting materials. As demonstrated herein, a sequential series of nickel-electrocatalytic cross-couplings can be enlisted to enable rapid access to such structures, many of which have been nearly impossible to access before without recourse to time-consuming polar bond disconnections that are inherently limiting in terms of accessible chemical space. The scalability of this new reaction sequence is demonstrated, alongside direct applications to known patented structures. A simple user guide is also presented to accelerate adoption of this strategy in medicinal chemistry and related fields.
- Open Access
- 6 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Dibromocarbene Addition to Bicyclo[1.1.0]butanes: A Facile Route to Substituted Bicyclo[1.1.1]pentanes
Strained, multicyclic hydrocarbons are increasingly important structural motifs for drug discovery. In particular, substituted bicyclo[1.1.1]pentanes (BCPs) have risen to prominence as bioisosteres for the ubiquitous benzene ring. Despite their favorable pharmacokinetic properties, synthetic strategies towards BCPs suffer from significant drawbacks – namely an overreliance on [1.1.1]propellane – an operationally challenging to utilize starting material which complicates scale-up and hampers widespread adoption of these motifs. In this work, the synthesis of 2,2-dibromo BCPs is described, presenting a class of novel substituted BCPs and circumventing the need for [1.1.1]propellane-based precursors. Scalable access to these compounds is demonstrated in a simple and inexpensive process, and their applicability for medicinal chemistry campaigns is highlighted through the synthesis of a diverse range of valuable building blocks – including highly sought-after bridge arylated BCP derivatives which are prepared via a novel electrocatalytic cross-coupling procedure.
- 6 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDibromocarbene Addition to Bicyclo[1.1.0]butanes: A Facile Route to Substituted Bicyclo[1.1.1]pentanes
Strained, multicyclic hydrocarbons are increasingly important structural motifs for drug discovery. In particular, substituted bicyclo[1.1.1]pentanes (BCPs) have risen to prominence as bioisosteres for the ubiquitous benzene ring. Despite their favorable pharmacokinetic properties, synthetic strategies towards BCPs suffer from significant drawbacks – namely an overreliance on [1.1.1]propellane – an operationally challenging to utilize starting material which complicates scale-up and hampers widespread adoption of these motifs. In this work, the synthesis of 2,2-dibromo BCPs is described, presenting a class of novel substituted BCPs and circumventing the need for [1.1.1]propellane-based precursors. Scalable access to these compounds is demonstrated in a simple and inexpensive process, and their applicability for medicinal chemistry campaigns is highlighted through the synthesis of a diverse range of valuable building blocks – including highly sought-after bridge arylated BCP derivatives which are prepared via a novel electrocatalytic cross-coupling procedure.
- 22 April 2025
- Published by Springer Nature in Nature
- Vol. 642 (8066) , 85-91
Stereoretentive radical cross-coupling
Free radicals were first discovered over 120 years ago by Gomberg1 and the first radical cross-couplings demonstrated by Kochi in the 1970’s.2 In contrast to widely employed polar cross-coupling chemistry to forge C(sp2)–C(sp2) bonds (Suzuki, Negishi, Kumada, etc.), radical cross-coupling is advantageous when applied to the coupling of saturated systems due to the mild conditions employed and enhanced chemoselectivity associated with single electron chemistry. Indeed, the ability to employ ubiquitous carbon-based fragments (carboxylic acids, alcohols, amines, olefins, etc.) in cross-coupling has dramatically simplified access to a variety of complex molecules.3-9 Despite these advantages, enantiospecific coupling reactions involving free radicals are unknown and generally believed to be challenging due to their near-instantaneous racemization (picosecond timescale).10 As a result, controlling the stereochemical outcome of radical cross-coupling can only be achieved on a case-by-case basis using bespoke chiral ligands11 or in a diastereoselective fashion guided by nearby stereocenters.12 Here we show how readily accessible enantioenriched sulfonylhydrazides and low loadings of an inexpensive achiral Ni-catalyst can be enlisted to solve this vexing challenge for the first time thereby enabling enantiospecific, stereoretentive radical cross-coupling between enantioenriched alkyl fragments and (hetero)aryl halides without exogenous redox chemistry or chiral ligands. Calculations support the intermediacy of a unique Ni-bound diazene-containing transition state with C–C bond formation driven by loss of N2.
- 22 April 2025
- Published by Springer Nature in Nature
- Vol. 642 (8066) , 85-91
Stereoretentive radical cross-coupling
Free radicals were first discovered over 120 years ago by Gomberg1 and the first radical cross-couplings demonstrated by Kochi in the 1970’s.2 In contrast to widely employed polar cross-coupling chemistry to forge C(sp2)–C(sp2) bonds (Suzuki, Negishi, Kumada, etc.), radical cross-coupling is advantageous when applied to the coupling of saturated systems due to the mild conditions employed and enhanced chemoselectivity associated with single electron chemistry. Indeed, the ability to employ ubiquitous carbon-based fragments (carboxylic acids, alcohols, amines, olefins, etc.) in cross-coupling has dramatically simplified access to a variety of complex molecules.3-9 Despite these advantages, enantiospecific coupling reactions involving free radicals are unknown and generally believed to be challenging due to their near-instantaneous racemization (picosecond timescale).10 As a result, controlling the stereochemical outcome of radical cross-coupling can only be achieved on a case-by-case basis using bespoke chiral ligands11 or in a diastereoselective fashion guided by nearby stereocenters.12 Here we show how readily accessible enantioenriched sulfonylhydrazides and low loadings of an inexpensive achiral Ni-catalyst can be enlisted to solve this vexing challenge for the first time thereby enabling enantiospecific, stereoretentive radical cross-coupling between enantioenriched alkyl fragments and (hetero)aryl halides without exogenous redox chemistry or chiral ligands. Calculations support the intermediacy of a unique Ni-bound diazene-containing transition state with C–C bond formation driven by loss of N2.
- Open Access
- 14 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Stereoretentive Radical Cross-Coupling
Free radicals were first discovered over 120 years ago by Gomberg and the first radical cross-couplings demonstrated by Kochi in the 1970's. Fueled by the need for general methods to couple C(sp3)-fragments, this area has seen an explosion of renewed interest. In contrast to widely employed polar cross-coupling chemistry to forge C(sp2)–C(sp2) bonds (Suzuki, Negishi, Kumada, etc.), radical cross-coupling is advantageous when applied to the coupling of saturated systems due to the mild conditions employed and enhanced chemoselectivity associated with single electron chemistry. Indeed, the ability to employ ubiquitous carbon-based fragments (carboxylic acids, alcohols, amines, olefins, etc.) in cross-coupling has dramatically simplified access to a variety of complex molecules. Despite these advantages, enantiospecific coupling reactions involving free radicals are unknown and generally believed to be impossible due to their near-instantaneous racemization (picosecond timescale). As a result, controlling the stereochemical outcome of radical cross-coupling can only be achieved on a case-by-case basis using bespoke chiral ligands or in a diastereoselective fashion guided by nearby stereocenters. Here we show how readily accessible enantioenriched sulfonylhydrazides and low loadings of an inexpensive achiral Ni-catalyst can be enlisted to solve this vexing challenge for the first time thereby enabling enantiospecific, stereoretentive radical cross-coupling between enantioenriched alkyl fragments and (hetero)aryl halides without exogenous redox chemistry or chiral ligands. Calculations support the intermediacy of a unique Ni-bound diazene-containing transition state with C–C bond formation driven by loss of N2.
- 14 March 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessStereoretentive Radical Cross-Coupling
Free radicals were first discovered over 120 years ago by Gomberg and the first radical cross-couplings demonstrated by Kochi in the 1970's. Fueled by the need for general methods to couple C(sp3)-fragments, this area has seen an explosion of renewed interest. In contrast to widely employed polar cross-coupling chemistry to forge C(sp2)–C(sp2) bonds (Suzuki, Negishi, Kumada, etc.), radical cross-coupling is advantageous when applied to the coupling of saturated systems due to the mild conditions employed and enhanced chemoselectivity associated with single electron chemistry. Indeed, the ability to employ ubiquitous carbon-based fragments (carboxylic acids, alcohols, amines, olefins, etc.) in cross-coupling has dramatically simplified access to a variety of complex molecules. Despite these advantages, enantiospecific coupling reactions involving free radicals are unknown and generally believed to be impossible due to their near-instantaneous racemization (picosecond timescale). As a result, controlling the stereochemical outcome of radical cross-coupling can only be achieved on a case-by-case basis using bespoke chiral ligands or in a diastereoselective fashion guided by nearby stereocenters. Here we show how readily accessible enantioenriched sulfonylhydrazides and low loadings of an inexpensive achiral Ni-catalyst can be enlisted to solve this vexing challenge for the first time thereby enabling enantiospecific, stereoretentive radical cross-coupling between enantioenriched alkyl fragments and (hetero)aryl halides without exogenous redox chemistry or chiral ligands. Calculations support the intermediacy of a unique Ni-bound diazene-containing transition state with C–C bond formation driven by loss of N2.
- Open Access
- 5 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Triply Convergent Ni-Electrocatalytic Assembly of 1,1-diaryl Cyclobutanes, Azetidines, and Oxetanes
Increasingly complex, three-dimensional leads for drug discovery are testing the limits of modern organic synthesis. In this context, the need for new methods to access gem-diarylated cyclobutanes, azetidines, and oxetanes is apparent. The present study outlines a modular, scalable, chemoselective approach to solve this problem using simple a-bromoacids and aryl halides as intuitive starting materials. As demonstrated herein, a sequential series of Ni-electrocatalytic cross-couplings can be enlisted to enable rapid access to such structures, many of which have never been accessible before, without recourse to time-consuming polar bond disconnections that are inherently limiting in terms of accessible chemical space. The scalability of this new reaction sequence is demonstrated, alongside direct applications to known patented structures. A simple user guide is also presented to accelerate adoption of this strategy in medicinal chemistry.
- 5 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTriply Convergent Ni-Electrocatalytic Assembly of 1,1-diaryl Cyclobutanes, Azetidines, and Oxetanes
Increasingly complex, three-dimensional leads for drug discovery are testing the limits of modern organic synthesis. In this context, the need for new methods to access gem-diarylated cyclobutanes, azetidines, and oxetanes is apparent. The present study outlines a modular, scalable, chemoselective approach to solve this problem using simple a-bromoacids and aryl halides as intuitive starting materials. As demonstrated herein, a sequential series of Ni-electrocatalytic cross-couplings can be enlisted to enable rapid access to such structures, many of which have never been accessible before, without recourse to time-consuming polar bond disconnections that are inherently limiting in terms of accessible chemical space. The scalability of this new reaction sequence is demonstrated, alongside direct applications to known patented structures. A simple user guide is also presented to accelerate adoption of this strategy in medicinal chemistry.