Seonha Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seonha Kim has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Changyeon Lee
Department of Chemical Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
1 shared publication - Hyeong Jun Kim
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
1 shared publication - Hyungju Ahn
Pohang Accelerator Laboratory
1 shared publication - Jae-Han Kim
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
1 shared publication - Jin-Seong Kim
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
1 shared publication - Taek-Soo Kim
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
1 shared publication
Latest Publications
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (10) , 4494-4503
Mechanically robust and high-performance ternary solar cells combining the merits of all-polymer and fullerene blends
In this study, we demonstrate that the introduction of small amounts of phenyl-C71-butyric acid methyl ester (PC71BM) into all-polymer solar cells (all-PSCs) increases the photovoltaic performance without compromising mechanical properties. Ternary blend polymer solar cells (ternary-PSCs) consisting of a polymer donor (PTB7-Th) and an acceptor mixture with different weight ratios of a polymeric acceptor (P(NDI2HD-T2)) and PC71BM demonstrate the effects of PC71BM loading on the power conversion efficiency (PCE) and mechanical properties. A significant enhancement in the PCEs of ternary-PSCs, from 6.32% to 7.33%, is observed when PC71BM is added into the active layer as up to 30 wt% of the acceptor mixture. Importantly, the excellent mechanical properties (i.e., crack onset strain = 11.6%, toughness = 2237 J m−3) of the blend films are well preserved at PC71BM loadings at or below 30 wt%. In contrast, both the PCE and the mechanical performance of the ternary-PSCs significantly decrease at higher PC71BM loadings (>50 wt%). Detailed morphological analysis via grazing incidence X-ray scattering measurements reveals that PC71BM molecules are well-dispersed in the amorphous portion of the active layer at PC71BM loadings up to 30 wt%. Therefore, both the mechanical and photovoltaic performances of the ternary-PSCs correlate closely with their morphological behavior, particularly in terms of the mixing behavior of PC71BM with polymers. The well-dispersed PC71BM molecules in the amorphous polymer domains facilitate efficient exciton dissociation, whereas the formation of PC71BM aggregates above a critical concentration causes severe mechanical degradation of the ternary-PSCs due to the presence of weak interfaces between the brittle PC71BM and polymer domains. Therefore, the ternary blends with optimal content of polymer/fullerene acceptors represent important candidates for flexible and wearable solar cells that require both high mechanical and photovoltaic performances.
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (10) , 4494-4503
Mechanically robust and high-performance ternary solar cells combining the merits of all-polymer and fullerene blends
In this study, we demonstrate that the introduction of small amounts of phenyl-C71-butyric acid methyl ester (PC71BM) into all-polymer solar cells (all-PSCs) increases the photovoltaic performance without compromising mechanical properties. Ternary blend polymer solar cells (ternary-PSCs) consisting of a polymer donor (PTB7-Th) and an acceptor mixture with different weight ratios of a polymeric acceptor (P(NDI2HD-T2)) and PC71BM demonstrate the effects of PC71BM loading on the power conversion efficiency (PCE) and mechanical properties. A significant enhancement in the PCEs of ternary-PSCs, from 6.32% to 7.33%, is observed when PC71BM is added into the active layer as up to 30 wt% of the acceptor mixture. Importantly, the excellent mechanical properties (i.e., crack onset strain = 11.6%, toughness = 2237 J m−3) of the blend films are well preserved at PC71BM loadings at or below 30 wt%. In contrast, both the PCE and the mechanical performance of the ternary-PSCs significantly decrease at higher PC71BM loadings (>50 wt%). Detailed morphological analysis via grazing incidence X-ray scattering measurements reveals that PC71BM molecules are well-dispersed in the amorphous portion of the active layer at PC71BM loadings up to 30 wt%. Therefore, both the mechanical and photovoltaic performances of the ternary-PSCs correlate closely with their morphological behavior, particularly in terms of the mixing behavior of PC71BM with polymers. The well-dispersed PC71BM molecules in the amorphous polymer domains facilitate efficient exciton dissociation, whereas the formation of PC71BM aggregates above a critical concentration causes severe mechanical degradation of the ternary-PSCs due to the presence of weak interfaces between the brittle PC71BM and polymer domains. Therefore, the ternary blends with optimal content of polymer/fullerene acceptors represent important candidates for flexible and wearable solar cells that require both high mechanical and photovoltaic performances.