Artem Kuskov
Research Subjects
Artem Kuskov has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Dmitrii Andreev
University of New Mexico,Department of Electrical and Computer Engineering,Albuquerque,New Mexico,United States of America
5 shared publications - Edl Schamiloglu
Department of Electrical and Computer Engineering, University of New Mexico, Albuquerque, NM 87131, USA
5 shared publications - John G. Leopold
Technion, Israel Institute of Technology
4 shared publications - Yakov E. Krasik
Physics Department, Technion - Israeli Institute of Technology 1 , Haifa 3200003
4 shared publications - Yang Cao
Physics Department, Technion , 320000 Haifa
3 shared publications - Yuriy P. Bliokh
Physics Department, Technion, Israel Institute of Technology , Haifa 320003
3 shared publications
Latest Publications
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Experiments on a Segmented Axial Relativistic Magnetron Fed by a Split Cathode
We have recently confirmed that a magnetron fed by a split cathode operates as well as when a solid cathode is applied. With a split cathode no microwave pulse shortening appears. We have also shown that a magnetron built from anode block segments separated by longitudinal slits, allows fast magnetic field penetration and does not influence the magnetron operation. This allows the use of a pulsed, much lower power system, to charge the coil supplying the required axial insulating magnetic field. The result is a compact light weight and repetitive system with considerably higher overall electrical efficiency. We present new experiments using our Linear Induction Accelerator as the magnetron power source.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Experiments on a Segmented Axial Relativistic Magnetron Fed by a Split Cathode
We have recently confirmed that a magnetron fed by a split cathode operates as well as when a solid cathode is applied. With a split cathode no microwave pulse shortening appears. We have also shown that a magnetron built from anode block segments separated by longitudinal slits, allows fast magnetic field penetration and does not influence the magnetron operation. This allows the use of a pulsed, much lower power system, to charge the coil supplying the required axial insulating magnetic field. The result is a compact light weight and repetitive system with considerably higher overall electrical efficiency. We present new experiments using our Linear Induction Accelerator as the magnetron power source.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Power Calculations for Overmoded High Power Millimeter-Wave Devices
The microwave electronic efficiency of high-power microwave devices is derived from the ratio of total radiated power to input electron beam power. In this work, we are exploring different approaches to calculate the radiated power from high-power microwave and millimeter-wave devices. The total radiated power is usually obtained by integrating the measured radiation pattern in the far-field. For high-power microwave experiments, it is only possible to collect a limited number of data to estimate the total power. In addition, it is a challenge to map the radiation pattern in both the horizontal and vertical planes. One possible way is by fitting the data points using a curve fitting tool to find a mathematical expression and then integrating the function over the solid angle regardless of the operating mode. The power pattern data points can be interpreted as the radiation power density or the radiation power intensity. That is valid for the far-field region, which is not always possible for millimeter-wave range.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Power Calculations for Overmoded High Power Millimeter-Wave Devices
The microwave electronic efficiency of high-power microwave devices is derived from the ratio of total radiated power to input electron beam power. In this work, we are exploring different approaches to calculate the radiated power from high-power microwave and millimeter-wave devices. The total radiated power is usually obtained by integrating the measured radiation pattern in the far-field. For high-power microwave experiments, it is only possible to collect a limited number of data to estimate the total power. In addition, it is a challenge to map the radiation pattern in both the horizontal and vertical planes. One possible way is by fitting the data points using a curve fitting tool to find a mathematical expression and then integrating the function over the solid angle regardless of the operating mode. The power pattern data points can be interpreted as the radiation power density or the radiation power intensity. That is valid for the far-field region, which is not always possible for millimeter-wave range.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
A Study of Electron Dynamics in a Split-Cathode Coaxially Within an Anode
The split cathode is a novel type of cathode structure applied in a cylindrical high voltage gap built from a coaxial vacuum transmission line that feeds it. A hollow electron beam is emitted from it. The cathode is attached to a conducting circular plate, the reflector, by a central metal rod. The cathode, rod, and reflector are at almost the same potential. An applied axial magnetic field magnetizes the electron beam which accelerates toward the reflector where it slows down and returns toward the cathode. For strong magnetic fields, while charge is trapped inside the cathode-anode-reflector space and has nowhere to go, the energy of the electrons reduces to what is known as a squeezed state. For lower magnetic fields, due to beam expansion in the radial direction which can result in anode current and overflow beyond the cathode or the reflector, squeezing is only partial. We show that quasiperiodic rotating transverse electron orbits appear in this two-stream flow, evidence for the diocotron instability. The dependence of the appearance of these low period shapes on various parameters and the possible connection of this behavior to the dynamics of the electromagnetic coupling in a magnetron type slow-wave structure is investigated.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
A Study of Electron Dynamics in a Split-Cathode Coaxially Within an Anode
The split cathode is a novel type of cathode structure applied in a cylindrical high voltage gap built from a coaxial vacuum transmission line that feeds it. A hollow electron beam is emitted from it. The cathode is attached to a conducting circular plate, the reflector, by a central metal rod. The cathode, rod, and reflector are at almost the same potential. An applied axial magnetic field magnetizes the electron beam which accelerates toward the reflector where it slows down and returns toward the cathode. For strong magnetic fields, while charge is trapped inside the cathode-anode-reflector space and has nowhere to go, the energy of the electrons reduces to what is known as a squeezed state. For lower magnetic fields, due to beam expansion in the radial direction which can result in anode current and overflow beyond the cathode or the reflector, squeezing is only partial. We show that quasiperiodic rotating transverse electron orbits appear in this two-stream flow, evidence for the diocotron instability. The dependence of the appearance of these low period shapes on various parameters and the possible connection of this behavior to the dynamics of the electromagnetic coupling in a magnetron type slow-wave structure is investigated.
- 11 January 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (2) , 023301
An advanced relativistic magnetron operating with a split cathode and separated anode segments
We report the successful operation of an advanced relativistic magnetron made up of separate anode segments and fed by a split cathode as suggested by Leopold et al. [Phys. Plasmas 27, 103102 (2020)]. A split cathode has the advantage that the emitter is placed outside the interaction region so that the cathode plasma does not cause pulse shortening. We find that the split cathode-fed magnetron performs as well as a common explosive emission plasma cathode but without the appearance of microwave pulse shortening during ∼200 ns while the pulsed generator is at its maximum power. The angular magnetron segments facilitate longitudinal slits in the magnetron's anode block, which allows for fast magnetic field penetration. This drastically decreases the power requirements of the pulsed generator feeding the axial insulating magnetic field producing solenoid and does not affect the operation of the magnetron. This results not only in a compact system but also in overall high electrical efficiency and the possibility to operate the relativistic magnetron in a repetitive mode.
- 11 January 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (2) , 023301
An advanced relativistic magnetron operating with a split cathode and separated anode segments
We report the successful operation of an advanced relativistic magnetron made up of separate anode segments and fed by a split cathode as suggested by Leopold et al. [Phys. Plasmas 27, 103102 (2020)]. A split cathode has the advantage that the emitter is placed outside the interaction region so that the cathode plasma does not cause pulse shortening. We find that the split cathode-fed magnetron performs as well as a common explosive emission plasma cathode but without the appearance of microwave pulse shortening during ∼200 ns while the pulsed generator is at its maximum power. The angular magnetron segments facilitate longitudinal slits in the magnetron's anode block, which allows for fast magnetic field penetration. This drastically decreases the power requirements of the pulsed generator feeding the axial insulating magnetic field producing solenoid and does not affect the operation of the magnetron. This results not only in a compact system but also in overall high electrical efficiency and the possibility to operate the relativistic magnetron in a repetitive mode.
- 15 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (3) , 034501
Experimental and numerical study of a split cathode fed relativistic magnetron
The relativistic magnetron is one of the most efficient high power microwave (HPM) sources but pulse shortening, the result of explosive cathode plasma's radial expansion toward the anode, makes it impractical because the HPM pulse terminates much earlier than the applied voltage. We present experimental results of the operation of a relativistic magnetron fed by a split cathode. A split cathode [Leopold et al., Phys. Plasmas 27, 103102 (2020)] consists of a cathode placed upstream and outside the anode, connected by an axial rod to a reflector (a transverse conducting circular plate) placed downstream from the anode. The electron charge, emitted by an annular explosive cathode emitter, accumulates in the space between the cathode and the reflector and at the same time, screens the rod from explosive plasma formation. This accumulated space charge serves as the electron source for the magnetron. The explosive plasma developing on the emitter remains outside the magnetron and does not propagate into the anode while it operates. We compare the performance of the magnetron operating with a standard explosive emitting solid carbon cathode to that with a split cathode. The experiments demonstrate that whereas for the solid cathode, the microwave pulse developing in the magnetron suffers from pulse shortening, with a split cathode, the pulse survives as long as the amplitude of the applied voltage is sufficient for the magnetron's operation. We support the experiment by particle-in-cell simulations.
- 15 July 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 130 (3) , 034501
Experimental and numerical study of a split cathode fed relativistic magnetron
The relativistic magnetron is one of the most efficient high power microwave (HPM) sources but pulse shortening, the result of explosive cathode plasma's radial expansion toward the anode, makes it impractical because the HPM pulse terminates much earlier than the applied voltage. We present experimental results of the operation of a relativistic magnetron fed by a split cathode. A split cathode [Leopold et al., Phys. Plasmas 27, 103102 (2020)] consists of a cathode placed upstream and outside the anode, connected by an axial rod to a reflector (a transverse conducting circular plate) placed downstream from the anode. The electron charge, emitted by an annular explosive cathode emitter, accumulates in the space between the cathode and the reflector and at the same time, screens the rod from explosive plasma formation. This accumulated space charge serves as the electron source for the magnetron. The explosive plasma developing on the emitter remains outside the magnetron and does not propagate into the anode while it operates. We compare the performance of the magnetron operating with a standard explosive emitting solid carbon cathode to that with a split cathode. The experiments demonstrate that whereas for the solid cathode, the microwave pulse developing in the magnetron suffers from pulse shortening, with a split cathode, the pulse survives as long as the amplitude of the applied voltage is sufficient for the magnetron's operation. We support the experiment by particle-in-cell simulations.
- Open Access
- 11 October 2019
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 4 (6) , 067201
Review of the relativistic magnetron
The cavity magnetron is the most compact, efficient source of high-power microwave (HPM) radiation. The imprint that the magnetron has had on the world is comparable to the invention of the nuclear bomb. High- and low-power magnetrons are used in many applications, such as radar systems, plasma generation for semiconductor processing, and—the most common—microwave ovens for personal and industrial use. Since the invention of the magnetron in 1921 by Hull, scientists and engineers have improved and optimized magnetron technology by altering the geometry, materials, and operating conditions, as well as by identifying applications. A major step in advancing magnetrons was the relativistic magnetron introduced by Bekefi and Orzechowski at MIT (USA, 1976), followed by the invention of the relativistic magnetron with diffraction output (MDO) by Kovalev and Fuks at the Institute of Applied Physics (Soviet Union, 1977). The performance of relativistic magnetrons did not advance significantly thereafter until researchers at the University of Michigan and University of New Mexico (UNM) independently introduced new priming techniques and new cathode topologies in the 2000s, and researchers in Japan identified a flaw in the original Soviet MDO design. Recently, the efficiency of the MDO has reached 92% with the introduction of a virtual cathode and magnetic mirror, proposed by Fuks and Schamiloglu at UNM (2018). This article presents a historical review of the progression of the magnetron from a device intended to operate as a high-voltage switch controlled by the magnetic field that Hull published in 1921, to the most compact and efficient HPM source in the twenty-first century.
- 11 October 2019
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 4 (6) , 067201
Open AccessReview of the relativistic magnetron
The cavity magnetron is the most compact, efficient source of high-power microwave (HPM) radiation. The imprint that the magnetron has had on the world is comparable to the invention of the nuclear bomb. High- and low-power magnetrons are used in many applications, such as radar systems, plasma generation for semiconductor processing, and—the most common—microwave ovens for personal and industrial use. Since the invention of the magnetron in 1921 by Hull, scientists and engineers have improved and optimized magnetron technology by altering the geometry, materials, and operating conditions, as well as by identifying applications. A major step in advancing magnetrons was the relativistic magnetron introduced by Bekefi and Orzechowski at MIT (USA, 1976), followed by the invention of the relativistic magnetron with diffraction output (MDO) by Kovalev and Fuks at the Institute of Applied Physics (Soviet Union, 1977). The performance of relativistic magnetrons did not advance significantly thereafter until researchers at the University of Michigan and University of New Mexico (UNM) independently introduced new priming techniques and new cathode topologies in the 2000s, and researchers in Japan identified a flaw in the original Soviet MDO design. Recently, the efficiency of the MDO has reached 92% with the introduction of a virtual cathode and magnetic mirror, proposed by Fuks and Schamiloglu at UNM (2018). This article presents a historical review of the progression of the magnetron from a device intended to operate as a high-voltage switch controlled by the magnetic field that Hull published in 1921, to the most compact and efficient HPM source in the twenty-first century.