Patrick Löb
Patrick Löb has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
V. Hessel
Institut für Mikrotechnik Mainz GmbH, Carl‐Zeiss‐Straße 18‐20, D‐55129 Mainz
4 shared publicationsC. Hofmann
3 shared publicationsD. Metzke
2 shared publications- Daniel Metzke
University Mainz, Institute of Physical Chemistry, Welder Weg 11, D-55128 Mainz, GermanyInstitute of Microtechnology Mainz GmbH (IMM), Carl-Zeiss-Str. 18-20, D-55129 Mainz, Germany
2 shared publications G. Menges
Institut für Mikrotechnik Mainz GmbH, Carl‐Zeiss‐Straße 18‐20, D‐55129 Mainz
2 shared publicationsY. Men
Institut für Mikrotechnik Mainz GmbH, Carl‐Zeiss‐Straße 18‐20, D‐55129 Mainz
2 shared publications
Latest Publications
- 20 September 2013
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 2 (5) , 379-380
EU FP7 Project CoPIRIDE – towards new production and factory concepts for a sustainable and competitive European chemical industry
Article EU FP7 Project CoPIRIDE – towards new production and factory concepts for a sustainable and competitive European chemical industry was published on October 1, 2013 in the journal Green Processing and Synthesis (volume 2, issue 5).
- 20 September 2013
- Published by Walter de Gruyter GmbH in Green Processing and Synthesis
- Vol. 2 (5) , 379-380
EU FP7 Project CoPIRIDE – towards new production and factory concepts for a sustainable and competitive European chemical industry
Article EU FP7 Project CoPIRIDE – towards new production and factory concepts for a sustainable and competitive European chemical industry was published on October 1, 2013 in the journal Green Processing and Synthesis (volume 2, issue 5).
- 19 November 2012
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 15 (2) , 463-477
Process design accompanying life cycle management and risk analysis as a decision support tool for sustainable biodiesel production
The search for sustainable synthesis pathways for biodiesel generation is still ongoing, although extensive research and development work on this topic has already led to a broad variety of process alternatives, utilizing different feedstocks, alcohols, catalysts and process parameters. Thus, the choice for the most sustainable option is not an easy task, depending on related costs and environmental impacts deriving from up-stream and down-stream processes, but also on safety constraints. The aim of our work presented herein is to demonstrate a decision support procedure for the best suited process design of biodiesel production in front of a pilot plant construction. The development of a novel biodiesel production alternative was accompanied by Life Cycle Management and Risk Analysis in an iterative procedure nearly from the beginning in order to point out favorable process parameter combinations in parallel to experimental optimization. The transesterification of waste oil via supercritical processing in intensifying continuous flow reactors, using the feedstock methanol, was found to be the most favourable option.
- 19 November 2012
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 15 (2) , 463-477
Process design accompanying life cycle management and risk analysis as a decision support tool for sustainable biodiesel production
The search for sustainable synthesis pathways for biodiesel generation is still ongoing, although extensive research and development work on this topic has already led to a broad variety of process alternatives, utilizing different feedstocks, alcohols, catalysts and process parameters. Thus, the choice for the most sustainable option is not an easy task, depending on related costs and environmental impacts deriving from up-stream and down-stream processes, but also on safety constraints. The aim of our work presented herein is to demonstrate a decision support procedure for the best suited process design of biodiesel production in front of a pilot plant construction. The development of a novel biodiesel production alternative was accompanied by Life Cycle Management and Risk Analysis in an iterative procedure nearly from the beginning in order to point out favorable process parameter combinations in parallel to experimental optimization. The transesterification of waste oil via supercritical processing in intensifying continuous flow reactors, using the feedstock methanol, was found to be the most favourable option.
- 1 December 2009
- Published by Taylor & Francis in La Houille Blanche
- Vol. 95 (6) , 125-128
Synthesis of block copolymer vesicles in a micromixer
- 1 December 2009
- Published by Taylor & Francis in La Houille Blanche
- Vol. 95 (6) , 125-128
Synthesis of block copolymer vesicles in a micromixer
- 10 October 2007
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 5 (1)
Scale-up of Process Intensifying Falling Film Microreactors to Pilot Production Scale
Microstructured reactors with their benefits especially concerning enhanced mass and heat transfer represent a means for process intensification. A broadly used microstructured lab tool in the area of gas/liquid contacting is the Falling Film Microreactor (FFMR) developed by IMM in which liquid films of a few tens of micrometer thickness and interfacial areas of up to 20,000 m2/m3 combined with an effective heat exchange can be obtained. Now the concept of the Falling Film Microreactor has been developed further with regard to increasing throughput in order to reach pilot production level and as a basis for future production scale throughput. Therefore, two different prototypes with a tenfold larger structured surface area have been developed and realized. The feasibility of a corresponding increase of throughput has been demonstrated for the oxidation of an organic compound using oxygen which is closely linked to an industrial relevant reaction and additionally by the absorption of CO2 in an aqueous sodium hydroxide solution. Naturally, process optimisation itself also contributes to the efforts to increase throughput. Therefore, the oxidation reaction has been optimised in both varying process parameters (temperature, flow rates, pressure) and reactor parameters (microchannel width and depth) in the original, standard Falling Film Microreactor. Conducting experiments at 10 bar instead of ambient pressure and using a reaction plate with 1200 µm x 400 µm channels instead of 600 µm x 200 µm channels lead to an increase in conversion. These investigations also encourage exploring more challenging process conditions and thereby following the concept of "novel chemistry."
- 10 October 2007
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 5 (1)
Scale-up of Process Intensifying Falling Film Microreactors to Pilot Production Scale
Microstructured reactors with their benefits especially concerning enhanced mass and heat transfer represent a means for process intensification. A broadly used microstructured lab tool in the area of gas/liquid contacting is the Falling Film Microreactor (FFMR) developed by IMM in which liquid films of a few tens of micrometer thickness and interfacial areas of up to 20,000 m2/m3 combined with an effective heat exchange can be obtained. Now the concept of the Falling Film Microreactor has been developed further with regard to increasing throughput in order to reach pilot production level and as a basis for future production scale throughput. Therefore, two different prototypes with a tenfold larger structured surface area have been developed and realized. The feasibility of a corresponding increase of throughput has been demonstrated for the oxidation of an organic compound using oxygen which is closely linked to an industrial relevant reaction and additionally by the absorption of CO2 in an aqueous sodium hydroxide solution. Naturally, process optimisation itself also contributes to the efforts to increase throughput. Therefore, the oxidation reaction has been optimised in both varying process parameters (temperature, flow rates, pressure) and reactor parameters (microchannel width and depth) in the original, standard Falling Film Microreactor. Conducting experiments at 10 bar instead of ambient pressure and using a reaction plate with 1200 µm x 400 µm channels instead of 600 µm x 200 µm channels lead to an increase in conversion. These investigations also encourage exploring more challenging process conditions and thereby following the concept of "novel chemistry."
- Open Access
- 18 September 2007
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 79 (9) , 1297
Charakterisierung eines Mikrofallfilmreaktors für den Pilotanlagenbetrieb
- 18 September 2007
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 79 (9) , 1297
Open AccessCharakterisierung eines Mikrofallfilmreaktors für den Pilotanlagenbetrieb
- Open Access
- 6 September 2006
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 78 (9) , 1212
Flüssig/Flüssig-Dispergierung in verschiedenen Mikromischertypen
- 6 September 2006
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 78 (9) , 1212
Open AccessFlüssig/Flüssig-Dispergierung in verschiedenen Mikromischertypen
- Open Access
- 6 September 2006
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 78 (9) , 1204-1205
Gas/Flüssig-Kontaktierung in Mikrofallfilmreaktoren im Pilot- und Produktionsmaßstab
- 6 September 2006
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 78 (9) , 1204-1205
Open AccessGas/Flüssig-Kontaktierung in Mikrofallfilmreaktoren im Pilot- und Produktionsmaßstab
- 10 January 2006
- Published by Elsevier in Chemical Engineering Science
- Vol. 61 (9) , 2959-2967
Impact of fluid path geometry and operating parameters on l/l-dispersion in interdigital micromixers
- 10 January 2006
- Published by Elsevier in Chemical Engineering Science
- Vol. 61 (9) , 2959-2967
Impact of fluid path geometry and operating parameters on l/l-dispersion in interdigital micromixers