Yanhua Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanhua Wang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Xuan Zhang
Key Laboratory of Marine Chemistry Theory and Technology, College of Chemistry and Chemical Engineering, Ministry of Education, Ocean University of China, Qingdao, China
2 shared publications- Zhencheng Tao
Key Laboratory of Marine Ecology and Environmental Sciences, Institute of Oceanology, Chinese Academy of Sciences, Qingdao, China
2 shared publications Baorong Hou
1 shared publication- Baorong Hou
Key Laboratory of Marine Environmental Corrosion and Bio-fouling, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071, China
1 shared publication Cheng Zhen
Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao, China
1 shared publicationChunli Wang
1 shared publication
Latest Publications
- Open Access
- 28 January 2026
- Published by Elsevier in Sustainable Horizons
- Vol. 17
Cu2+-doped NiCo2O4 composite modified carbon felt cathode in marine sediment microbial fuel cells and its enhanced dissolved oxygen reduction reaction kinetics for higher power output
- 28 January 2026
- Published by Elsevier in Sustainable Horizons
- Vol. 17
Open AccessCu2+-doped NiCo2O4 composite modified carbon felt cathode in marine sediment microbial fuel cells and its enhanced dissolved oxygen reduction reaction kinetics for higher power output
- Open Access
- 6 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1946
Novel MOF-Based Photocatalyst AgBr/AgCl@ZIF-8 with Enhanced Photocatalytic Degradation and Antibacterial Properties
A novel visible light-driven AgBr/AgCl@ZIF-8 catalyst was synthesized by a simple and rapid method. The composition and structure of the photocatalyst were characterized by XRD, SEM, UV-DRS, and XPS. It could be observed that the 2-methylimidazole zinc salt (ZIF-8) exhibited the rhombic dodecahedron morphology with the AgCl and AgBr particles evenly distributed around it. The composite photocatalyst AgBr/AgCl@ZIF-8 showed good photocatalytic degradation and antibacterial properties. The degradation rate of RhB solution was 98%, with 60 min of irradiation of visible light, and almost all P. aeruginosaudomonas aeruginosa (P. aeruginosa), Staphylococcus aureus (S. aureus), and Escherichia coli (E. coli) were inactivated under the irradiation of 90 min. In addition, the prepared catalyst had excellent stability and reusability. Based on the free radical capture experiment, ·O2− and h+ were believed to be the main active substances, and possible photocatalytic degradation and sterilization mechanisms of AgBr/AgCl@ZIF-8 were proposed.
- 6 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (11) , 1946
Open AccessNovel MOF-Based Photocatalyst AgBr/AgCl@ZIF-8 with Enhanced Photocatalytic Degradation and Antibacterial Properties
A novel visible light-driven AgBr/AgCl@ZIF-8 catalyst was synthesized by a simple and rapid method. The composition and structure of the photocatalyst were characterized by XRD, SEM, UV-DRS, and XPS. It could be observed that the 2-methylimidazole zinc salt (ZIF-8) exhibited the rhombic dodecahedron morphology with the AgCl and AgBr particles evenly distributed around it. The composite photocatalyst AgBr/AgCl@ZIF-8 showed good photocatalytic degradation and antibacterial properties. The degradation rate of RhB solution was 98%, with 60 min of irradiation of visible light, and almost all P. aeruginosaudomonas aeruginosa (P. aeruginosa), Staphylococcus aureus (S. aureus), and Escherichia coli (E. coli) were inactivated under the irradiation of 90 min. In addition, the prepared catalyst had excellent stability and reusability. Based on the free radical capture experiment, ·O2− and h+ were believed to be the main active substances, and possible photocatalytic degradation and sterilization mechanisms of AgBr/AgCl@ZIF-8 were proposed.
- Open Access
- 3 June 2022
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
A Comparative Study of CoNi-LDH/ZnO Film for Photocathodic Protection Applications in the Marine Environment
In this study, two kinds of Co–Ni-layer double hydroxide (LDH)/ZnO films were prepared with different morphologies by a simple electrochemical method. The properties of the films were investigated by SEM, XRD, UV–Vis DRS, XPS, and electrochemical techniques. It was found that Co–Ni-LDH-modified ZnO films exhibited excellent photocathodic properties in a scavenger-free environment. This is mainly due to the absorption of visible light by LDH, the formation ofp–nheterojunction, and the depletion of photo-generated holes by the cycling process of Co (II)/Co (III). Compared with CoNi-LDH/ZnO nanorods, CoNi-LDH/ZnO nanoclusters showed better photocathodic protection performance and physical barrier effect. Under illumination conditions, the rough surface of ZnO nanoclusters and the deposition of a large amount of LDH can provide more photoelectrochemical active sites, thus improving the light absorption capacity and photocathodic protection performance of CoNi-LDH/ZnO nanoclusters. Under dark conditions, the physical barrier effect of CoNi-LDH/ZnO nanoclusters was also enhanced by the dense ZnO nanoclusters and thick CoNi-LDH layers.
- 3 June 2022
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
Open AccessA Comparative Study of CoNi-LDH/ZnO Film for Photocathodic Protection Applications in the Marine Environment
In this study, two kinds of Co–Ni-layer double hydroxide (LDH)/ZnO films were prepared with different morphologies by a simple electrochemical method. The properties of the films were investigated by SEM, XRD, UV–Vis DRS, XPS, and electrochemical techniques. It was found that Co–Ni-LDH-modified ZnO films exhibited excellent photocathodic properties in a scavenger-free environment. This is mainly due to the absorption of visible light by LDH, the formation ofp–nheterojunction, and the depletion of photo-generated holes by the cycling process of Co (II)/Co (III). Compared with CoNi-LDH/ZnO nanorods, CoNi-LDH/ZnO nanoclusters showed better photocathodic protection performance and physical barrier effect. Under illumination conditions, the rough surface of ZnO nanoclusters and the deposition of a large amount of LDH can provide more photoelectrochemical active sites, thus improving the light absorption capacity and photocathodic protection performance of CoNi-LDH/ZnO nanoclusters. Under dark conditions, the physical barrier effect of CoNi-LDH/ZnO nanoclusters was also enhanced by the dense ZnO nanoclusters and thick CoNi-LDH layers.
- Open Access
- 23 June 2020
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 15 (6) , e0234981
Corrosion behavior of an AZ91D magnesium alloy under a heterogeneous electrolyte layer
The corrosion behavior of an AZ91D magnesium alloy was investigated under a heterogeneous electrolyte layer by using electrochemical methods and surface analysis techniques. Dynamic polarization curves and morphological characterization were obtained at the center and near the edge zones under the electrolyte layer. The influence of the gas/liquid/solid three-phase boundary zone (TPB) on the corrosion behavior of the AZ91D magnesium alloy was discussed. The corrosion rate changed more significantly near the TPB zone than that at the other zones. The AZ91D alloy exhibited the characteristics of filiform corrosion together with shallow pitting corrosion. Different from the randomly distributed shallow pits, the filiform corrosion preferred to initiate near the TPB region and then progressively expanded adjacent to the edge of the electrolyte layer. The TPB zone played a vital role in determining the corrosion location, the corrosion morphologies and the corrosion rate of the magnesium alloy by influencing the mass transport process of carbon dioxide.
- 23 June 2020
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 15 (6) , e0234981
Open AccessCorrosion behavior of an AZ91D magnesium alloy under a heterogeneous electrolyte layer
The corrosion behavior of an AZ91D magnesium alloy was investigated under a heterogeneous electrolyte layer by using electrochemical methods and surface analysis techniques. Dynamic polarization curves and morphological characterization were obtained at the center and near the edge zones under the electrolyte layer. The influence of the gas/liquid/solid three-phase boundary zone (TPB) on the corrosion behavior of the AZ91D magnesium alloy was discussed. The corrosion rate changed more significantly near the TPB zone than that at the other zones. The AZ91D alloy exhibited the characteristics of filiform corrosion together with shallow pitting corrosion. Different from the randomly distributed shallow pits, the filiform corrosion preferred to initiate near the TPB region and then progressively expanded adjacent to the edge of the electrolyte layer. The TPB zone played a vital role in determining the corrosion location, the corrosion morphologies and the corrosion rate of the magnesium alloy by influencing the mass transport process of carbon dioxide.
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (4) , 309-313
Influences of the three‐phase boundary on the electrochemical corrosion characteristics of carbon steel under droplets
The potential/current distributions of carbon steel were investigated under 0.001 M sodium chloride droplets of various sizes using a wire beam electrode. During the corrosion process, carbon steel exhibited heterogeneous electrochemical characteristics with the major anodes located near the edge of the droplets. The three‐phase boundary (TPB) plays a vital role in determining the electrochemical distribution and the corrosion degree of carbon steel. With the increase of droplet size, the average anodic current density and the corrosion degree decreased, which is believed to be due to the decrease of the TPB length per unit area.
- 2 March 2012
- Published by Wiley in Materials and Corrosion
- Vol. 64 (4) , 309-313
Influences of the three‐phase boundary on the electrochemical corrosion characteristics of carbon steel under droplets
The potential/current distributions of carbon steel were investigated under 0.001 M sodium chloride droplets of various sizes using a wire beam electrode. During the corrosion process, carbon steel exhibited heterogeneous electrochemical characteristics with the major anodes located near the edge of the droplets. The three‐phase boundary (TPB) plays a vital role in determining the electrochemical distribution and the corrosion degree of carbon steel. With the increase of droplet size, the average anodic current density and the corrosion degree decreased, which is believed to be due to the decrease of the TPB length per unit area.