TSTerry J. Siebenmorgen

Terry J. Siebenmorgen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Terry J. Siebenmorgen has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of Thickness Fraction Process on Physicochemical Properties, Cooking Qualities, and Sensory Characteristics of Long-Grain Rice Samples

    by Sara E. Jarma Arroyo, Terry J. Siebenmorgen, Han-Seok Seo

    A process of removing thinner kernels of rough rice, i.e., thickness fraction process, has been suggested as a method for increasing milling yields in the rice industry. This study aimed at determining whether physicochemical properties, cooking qualities, and sensory characteristics of rice samples could be changed by the addition of a thickness fraction into the rice process stream. Each of four long-grain rice cultivar lots was assigned into two groups: unfractionated and thickness-fractionated. For the thickness-fractionated group, thin rice kernels (<1.9 mm) of rough rice were discarded from unfractionated rice samples. Unfractionated and thickness-fractionated rice samples were compared with respect to physicochemical properties, cooking qualities, and sensory characteristics. The results showed that the removal of such thin kernels decreased the breakage and chalkiness rates and increased head rice yields. Fractionated rice samples exhibited lower amylose contents and crude protein contents but higher gelatinization temperatures than unfractionated rice samples. While the optimum cooking duration and width–expansion ratios of thickness-fractionated rice samples were higher than those of unfractionated ones, there was a negligible impact of the thickness fraction process on sensory characteristics of long-grain rice samples. In conclusion, the thickness fraction process affects physicochemical properties and cooking qualities more than the sensory characteristics of rice samples.


  • Rice paste viscosities and gel texture resulting from varying drying and tempering regimen

    by Seth Graham‐Acquaah, Terry J. Siebenmorgen

    Background and objectives: Heated‐air drying followed by tempering (HAT) is effective for increasing rough rice drying rates without compromising head rice yield (HRY). However, relatively little is known about the specific nature of the effects of HAT regimens on end‐use properties of rice. This study determined the effects of drying air conditions (air temperature and relative humidity) and tempering durations on changes in rice paste viscosities and gel texture.Findings: Rice paste viscosities and gel texture were not only dependent on drying air temperature but also on how long the rice was exposed to a given temperature during drying and tempering. Air relative humidity (rh) had an indirect effect on rice end‐use properties. Using different HAT regimens, peak viscosity was altered by 16%, final viscosity by 21%, breakdown by 24%, and setback by >500% compared with control samples. Gel strength was increased by approximately 40% with HAT regimens.Conclusions: Heated‐air drying and tempering conditions must be carefully selected, not only to minimize HRY reductions but also to minimize variations in the functional properties of rice intended for specified end uses. Likewise, HAT regimens could be selected to produce desired properties for specified end uses.Significance and novelty: Inconsistencies in rice flour functionality are a hindrance to an expansive use of rice in end‐use, gluten‐free product development. This study shows that drying, a critical postharvest operation, could introduce variations in rice flour quality, which also implies that HAT regimens could deliberately be utilized to produce flour for various end‐use applications.


  • Impact of alternative irrigation practices on rice quality

    by Seth Graham‐Acquaah, Terry J. Siebenmorgen, Michele L. Reba, Joseph H. Massey, Andy Mauromoustakos, Arlene Adviento‐Borbe, Robin January, Redentor Burgos, Joanne Baltz‐Gray

    Background and objectives: Current global concerns about water scarcity present a need to investigate more water‐efficient rice production methods. Alternate wetting and drying (AWD) is fast emerging as a water‐saving irrigation practice, but its effects on rice quality are largely unknown. To ascertain the impact of water‐saving irrigation practices on rice quality, three irrigation treatments, namely continuous flooding with cascade delivery (four fields); continuous flooding with multiple‐inlet delivery (four fields); and AWD with multiple‐inlet delivery (four fields), were established on 12 production‐sized (16.2 ha) fields in 2017.Findings: Results of rice quality evaluations showed that irrigation treatment had a significant (p < 0.05) effect on chalkiness. Samples harvested from the AWD fields had slightly greater mean chalkiness (5.6%) than samples harvested from the two continuously flooded fields (5.1–5.2%). Milling yields were not affected (p > 0.05) by irrigation treatments. The average milled rice and head rice yields across irrigation treatments were 73% and 59%, respectively. Regarding pasting properties, while peak and breakdown viscosities were not affected (p > 0.05) by the irrigation treatments, setback viscosity (SB), which is often linked with cooked rice texture, was impacted. Among the irrigation treatments, mean SB was least for the AWD treatment (146 cP), while the mean SB for the continuously flooded fields was similar at 168–169 cP.Conclusions: In summary, the use of AWD with multiple‐inlet delivery did not impact milling yields of rice relative to the conventional practices of continuous flooding. However, rice harvested from the AWD treatment fields had slightly greater chalkiness and lesser SB.Significance and novelty: This study addresses a gap in literature concerning the impact of emerging water‐saving irrigation techniques, especially AWD as it involves subjecting rice to a certain level of water stress, on rice grain quality characteristics.


  • Effect of tempering approach following cross-flow drying on rice milling yields

    by Sangeeta Mukhopadhyay, Terry J. Siebenmorgen, Andy Mauromoustakos

    Three tempering approaches were followed after drying rough rice at 16.3% and 20.5% initial moisture contents (IMCs) using 57 °C/13% RH air at an airflow of 0.56 (m3/s)/m2 for 30, 60, and 90 min in an experimentally simulated cross-flow drying column. For the longer drying durations, post-tempering head rice yields were consistently less when the interstitial air from rice from different cross sections of the drying column was allowed to “interact” during tempering than when the rice from these different cross sections was tempered separately; this effect was more prominent at the greater rice IMC. RH of the interstitial air during tempering was measured and used to estimate the minimum tempering durations required for the different tempering approaches.


  • Effect of Storage Moisture Content on Milling Characteristics of Rough Rice

    by Bhagwati Prakash, Terry J. Siebenmorgen, Kristen E. Gibson, Shweta Kumari

    Rough rice in the Mid-South U.S. is typically stored and milled at a moisture content (MC) between 12% and 13% on a wet basis. Drying harvested rice to lesser MCs requires increasingly greater energy and reduces the overall mass of rice, both of which translate into lesser financial return for the crop. Considering these disadvantages of drying and storing rice at lesser MCs, farmers and grain handlers have been interested in exploring storing rice at slightly greater MCs. The current study was undertaken to evaluate the effect of storing rice at five MCs (11%, 12%, 13%, 14%, and 15%) on milling characteristics, particularly surface lipid content (SLC), milled rice yield (MRY), and head rice yield (HRY); additionally, the effects of storing rice at two storage temperatures (25°C and 35°C) and several storage durations (up to one year) on milling characteristics were investigated. Five long-grain rice lots were harvested in 2016 and 2017 from several locations in Arkansas; rice from each lot was gently dried to the target MCs and then stored in sealed glass jars at selected temperatures. With an increase in storage MC, shorter milling durations were needed to achieve a given SLC, which could potentially reduce the cost of the milling operation. However, rice samples stored at greater MCs were observed to have lesser HRYs, which could reduce the economic value of rice. The mean HRYs of the 15% MC samples were 4.8 to 9.1 percentage points less than the mean HRYs of the 12% MC samples. This study quantifies the milling characteristics of rice when stored for various durations at different MCs and temperatures. Overall, these data will allow the rice industry to make informed decisions related to storage conditions of rice, specifically storage MC. Keywords: Head rice yield, Milling, Moisture content, Rice, Storage.


  • Mathematical Modeling of a Cross-Flow Rice Dryer with Grain Inverters

    by Bhagwati Prakash, Terry J. Siebenmorgen

    Industrial-scale cross-flow dryers are commonly equipped with grain inverters to improve the uniformity of drying across the column thickness. While a few mathematical models have been reported that include the operation of grain inverters, such models were rarely validated with experiments comprising grain inversions. In this study, a mathematical model was developed to evaluate the impact of grain inverters on the uniformity of grain moisture content (MC) across the column in cross-flow dryers. To improve the accuracy of model predictions, the impact of using two thin-layer drying equations, the Newton and modified Page equations, in the model was also investigated. An experimental setup was fabricated to simulate grain inversion, and drying experiments were performed to measure rice MC and air temperature across the column thickness, which were then compared with model-predicted values. When the modified Page equation was used in the model, the model predictions matched the experimental observations more closely than when using the Newton equation. The model successfully predicted grain and air properties when 0, 1, and 2 grain inversions were used; the root mean square error between predicted and measured values of rice MC and air temperature were within 0.1 to 0.2 percentage points and 1°C to 4°C, respectively. Grain inversions were shown to improve the uniformity of drying in rice kernels; in the tested drying conditions, a single grain inversion produced more uniform drying than two or more grain inversions in the column. The presented results demonstrate the usefulness of the developed model in investigating the role of grain inversion in cross-flow drying of rice. As such, the model could be readily used to improve dryer design, particularly the number and arrangement of grain inverters, and optimize rice drying operations. Keywords: Deep-bed drying, Grain inverters, Mathematical modeling, Reversed airflow, Thin-layer drying.


  • Effect of airflow rate on drying air and moisture content profiles inside a cross-flow drying column

    by Sangeeta Mukhopadhyay, Terry J. Siebenmorgen

    Rice at 20.5 and 16.3% initial moisture contents (IMCs) was dried using 57°C/13% RH air at airflow rates (Qs) of 0.36, 0.46, and 0.56 (m3/s)/m2 for 30, 60, and 90 min, respectively, in an experimentally simulated cross-flow drying column. Q significantly affected the drying air and rice moisture content profiles within the drying column; for a particular drying duration, the range of MCs within the column decreased as Q increased. Q also impacted the extents of intra-kernel material state gradients created and thus had potential impacts on kernel fissuring and consequent head rice yield reduction. In addition, the impact of Q on the above-mentioned profiles was dependent on the rice IMC.


  • Glass transition effects on milling yields in a cross-flow drying column

    by Sangeeta Mukhopadhyay, Terry J. Siebenmorgen

    Drying treatments were selected based on the glass transition temperature of rice kernels and applied in an experimentally simulated drying column. When kernels were dried in the glassy state, there was negligible head rice yield reduction (HRYR), regardless if samples had been tempered or not. But when kernels transitioned to the rubbery state during the initial stages of drying and subsequently developed sufficient intra-kernel material state gradients, significant HRYRs occurred, and HRYRs of tempered samples were significantly less than those of non-tempered samples throughout the column. Sample HRYRs near the heated-air plenum were much greater than those into the column.