JZJianer Zhou

Jianer Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jianer Zhou has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Formation Mechanism of Crystal Spots in Jian Kiln Oil-Spot Glaze Revealed by Simulation Experiments

    by Caishui Jiang, Junming Wu, Jianer Zhou, Ting Luo, Qifu Bao, Kun Liu

    The crystalline morphology and glaze color of Jian Kiln oil-spot glaze porcelain exhibit artistic beauty, making it one of the typical representatives of iron-based crystallized black porcelain from the Song Dynasty in China. This study sampled a series of specimens from key temperature points during simulation experiments, employing rapid air quenching to preserve the high-temperature state, capturing the formation process of oil-spot glaze crystals in Jian kiln ceramics. Key samples were subjected to microscopic structure and phase analysis using scanning electron microscopy (SEM), laser Raman spectroscopy (LRS), and X-ray photoelectron spectroscopy (XPS), revealing the formation mechanism of oil-spot glaze crystals in Jian kiln ceramics. The results indicate that the bubbles generated from the decomposition of iron oxide at high temperatures facilitate the migration and enrichment of iron-rich particles towards the glaze surface, laying a crucial material foundation for the subsequent crystallization process. The high-temperature reducing atmosphere accelerates the decomposition reaction of iron oxide, altering the concentration of Fe2+ in the glaze, the viscosity of the melt, and the surface tension, all of which are critical conditions that promote the formation of oil-spot glaze crystals. During the cooling phase, Fe3O4 nanocrystals oxidize into ε-Fe2O3 crystals, with external iron sources migrating inward to support ε-Fe2O3 crystal growth. This process gradually leads to the formation of micrometer-scale, leaf-shaped ε-Fe2O3 crystals that fully occupy the crystalline spots. The coloration of crystalline spots is closely tied to the size of the crystals. Thus, by adjusting the cooling regime, it is possible to create iron-based crystallization glazes with innovative color effects. Furthermore, this study offers significant insights for understanding the crystallization mechanisms of other ancient Chinese high-temperature iron-based crystallization glazes.


  • Open Access

    Significantly Enhanced Self-Cleaning Capability in Anatase TiO2 for the Bleaching of Organic Dyes and Glazes

    by Tiangui Zhao, Tihao Cao, Qifu Bao, Weixia Dong, Ping Li, Xingyong Gu, Yunzi Liang, Jianer Zhou

    In this study, the Mg2+-doped anatase TiO2 phase was synthesized via the solvothermal method by changing the ratio of deionized water and absolute ethanol Vwater/Vethanol). This enhances the bleaching efficiency under visible light. The crystal structure, morphology, and photocatalytic properties of Mg-doped TiO2 were characterized by X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, N2 adsorption-desorption, UV-Vis spectroscopy analysis, etc. Results showed that the photocatalytic activity of the Mg2+-doped TiO2 sample was effectively improved, and the morphology, specific surface area, and porosity of TiO2 could be controlled by Vwater/Vethanol. Compared with the Mg-undoped TiO2 sample, Mg-doped TiO2 samples have higher photocatalytic properties due to pure anatase phase formation. The Mg-doped TiO2 sample was synthesized at Vwater/Vethanol of 12.5:2.5, which has the highest bleaching rate of 99.5% for the rhodamine B dye during 80 min under visible light. Adding Mg2+-doped TiO2 into the phase-separated glaze is an essential factor for enhancing the self-cleaning capability. The glaze samples fired at 1180 °C achieved a water contact angle of 5.623° at room temperature and had high stain resistance (the blot floats as a whole after meeting the water).


  • Open Access

    Preparation of Glass-Ceramics in the R2O-Bi2O3-B2O3-SiO2 System Applied in Automobile Glass Enamel

    by Tiangui Zhao, Wei Wang, Kun Liu, Li Liu, Weixia Dong, Qifu Bao, Heliang Xu, Jianer Zhou

    Environmental deterioration has put higher requirements on the acid resistance of automotive glass enamel. The present paper aims to prepare acid-resistant glass-ceramics used in automobile glass enamel. Base glasses with the compositions 15R2O-xBi2O3-10B2O3-(75-x) SiO2 (R2O is a mixture of Li2O, Na2O, and K2O (1:1:1, molar ratio), where x = 10, 15, 20, 25, and 30, respectively) was prepared by the melt-quenching method, and glass-ceramics were prepared by their controlling crystallization heat treatment. Crystallization behavior and crystallization ability of base glasses were investigated using the thermal stability parameter (S), the crystallization kinetics calculation results of base glasses, as well as the phase identification results of the heat-treated samples. The effects of the heat treatment temperature on the micromorphology and acid resistance of the heat-treated glasses were also investigated. Then, the optimized glass ceramic was used to prepare automotive glass enamel. The results indicate that: (I) with the increase of Bi2O3/SiO2 ratio, the characteristic temperature of the base glass decreases, the coefficient of thermal expansion (CTE) and crystallization ability increases significantly, the crystallization temperature range becomes wider; (II) the crystallization activation energy of base glasses are in the range of 169~264 kJ/mol; (III) Bi2SiO5 and Bi2O2SiO3 metastable phases are mainly precipitated when the crystallization temperature is between 530 °C and 650 °C, while only Bi4Si3O12 phase is precipitated when the crystallization temperature is above 650 °C; (IV) crystallinity of base glass increases significantly with increasing heat treatment temperature, which is beneficial to improve the acid resistance of heat treated products; (V) automotive glass enamel was prepared by mixing 15R2O-25Bi2O3-10B2O3-50SiO2 glass-ceramic powder with copper-chrome black and varnish, and then printed on the automobile glass substrate. All the properties of the sintered enamel can meet the market requirements, and the acid resistance of our product is better than that of market products.


  • The structural evolution of 3D-RGO with reduction temperature and its effect on capacitive deionization performance

    by Kun Liu, Bingbing Chen, Aihu Feng, Ruixiang Deng, Xuebing Hu, Jianer Zhou, Yun Yu

    The structure control of electrode materials was one of the sticking points in capacitive deionization (CDI). In this work, a 3D cross-linked reduced graphene oxide (3D-RGO) was synthesized to effectively solve the problem of agglomeration during the reduction process. The effect of 3D-GO reduction temperature on its structure, surface functional groups, and CDI performance has been systematically analyzed. When the temperature is below 650 °C, a certain amount of functional groups remain on the 3D-RGO, which leads to an anti-CDI phenomenon due to the co-ion expulsion effect. Too high reduction temperature (above 1050 °C) will cause the collapse of the 3D-RGO framework, which results in the specific surface area and CDI performance decrease. The preferred reduction temperature is 850 °C, which results in a high specific surface area (447 m2 g−1), fewer surface functional groups, and abundant macropores and mesopores. This also achieves the highest desalination capacity of 8.7 mg g−1 at a voltage of 1.6 V in 100 mg L−1 NaCl solution. The open and interconnected porous structure of the 3D-RGO framework provides an effective substrate for later loading and modification.


  • Open Access

    Effect of hydrophilic modification with nano-titania and operation modes on the oil–water separation performance of microfiltration membrane

    by Qibing Chang, Xia Wang, Yongqing Wang, Xiaozhen Zhang, Sophie Cerneaux, Jian-Er Zhou

    The tubular Al2O3 microfiltration membranes modified with nano-TiO2 coating were applied in the separation of waste oil-in-water emulsion. The separation performances of the MF membranes with and without nano-TiO2 modification were studied under two different operation modes, i.e. the circulation mode and the concentration mode, respectively. The circulation mode in which the oil concentration in feed keeps constant simulates the condition of the great amount of feed to be treated, while the concentration mode in which the oil concentration in feed increases with the extraction of the filtrate simulates the condition of a small amount of feed to be treated. The results show that the operation mode has a less effect on the flux of the MF membranes, but has an important effect on the oil concentration of filtrate for the unmodified membrane. The oil concentration in filtrate under concentration mode is higher than that of circulation mode. For the modified membrane, the operation mode has a less effect on the flux and the oil concentration of filtrate, because the hydrophilic nano-TiO2 coating prevents oil droplets from penetrating the membrane pores. Under both operation modes, the fluxes of the modified membranes are higher than those of the unmodified membranes.


  • Open Access

    Application of integrated membrane technology in purification of chlorogenic acid

    by Runlin Han, Jinghui Zeng, Lu Han, Yongqing Wang, Qibing Chang, Xiaozhen Zhang, Jianer Zhou

    Integrated membrane technology is a membrane separation system, which can overcome the disadvantage of single membrane, save the cost, and improve the product quality. Chlorogenic acid, which is an effective component of Chinese medicine and a heat-sensitive substance, is not stable at high operation temperature. Chlorogenic acid with molecular weight of 354 Da and good solubility in water can be treated by nanofiltration (NF) membrane. In this work, polyetherimide (PEI) ultrafiltration (UF) membrane with good chemical and thermal stability is used in the purification of chlorogenic acid solution. Positively charged HACC/PEI NF membrane with good antibacterial performance and hydrophilicity is used to concentrate chlorogenic acid solution. It is found that, the PEI UF membrane can separate chlorogenic acid with other components and improve the purity of chlorogenic acid. At the same time, the rejection to chlorogenic acid of the positively charged NF membrane is about 92% which is suitable for the concentration of chlorogenic acid solution. The integrated membrane technology is very useful in the production of chlorogenic acid.


  • Evidence of ZrO2 sol–gel transition by gelation time and viscosity

    by Qibing Chang, Sophie Cerneaux, Xia Wang, Xiaozhen Zhang, Yongqing Wang, Jian-Er Zhou