Muthukumarasamy Natarajan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muthukumarasamy Natarajan has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Dhayalan Velauthapillai
Department of Engineering, University College of Bergen, Bergen, Norway
4 shared publications - Changhee Lee
Display Research Center, Samsung Display, Giheung, Republic of Korea
3 shared publications - Hyung-Jun Song
Department of Safety Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea
3 shared publications Jun Young Kim
Department of Electrical and Computer Engineering, Global Frontier Center for Multiscale Energy Systems, Seoul National University, Seoul 151-744, Republic of Korea
3 shared publications- M. Thambidurai
Seoul National University
3 shared publications R. Balasundaraprabhu
PSG College of Technology
3 shared publications
Latest Publications
- Open Access
- 22 April 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-16
Perovskite Solar Cells: A Porous Graphitic Carbon based Hole Transporter/Counter Electrode Material Extracted from an Invasive Plant Species Eichhornia Crassipes
Perovskite solar cells (PSCs) composed of organic polymer-based hole-transporting materials (HTMs) are considered to be an important strategy in improving the device performance, to compete with conventional solar cells. Yet the use of such expensive and unstable HTMs, together with hygroscopic perovskite structure remains a concern – an arguable aspect for the prospect of onsite photovoltaic (PV) application. Herein, we have demonstrated the sustainable fabrication of efficient and air-stable PSCs composed of an invasive plant (Eichhornia crassipes) extracted porous graphitic carbon (EC-GC) which plays a dual role as HTM/counter electrode. The changes in annealing temperature (~450 °C, ~850 °C and ~1000 °C) while extracting the EC-GC, made a significant impact on the degree of graphitization - a remarkable criterion in determining the device performance. Hence, the fabricated champion device-1c: Glass/FTO/c-TiO2/mp-TiO2/CH3NH3PbI3−xClx/EC-GC10@CH3NH3PbI3−x Clx/EC-GC10) exhibited a PCE of 8.52%. Surprisingly, the introduced EC-GC10 encapsulated perovskite interfacial layer at the perovskite/HTM interface helps in overcoming the moisture degradation of the hygroscopic perovskite layer in which the same champion device-1c evinced better air stability retaining its efficiency ~94.40% for 1000 hours. We believe that this present work on invasive plant extracted carbon playing a dual role, together as an interfacial layer may pave the way towards a reliable perovskite photovoltaic device at low-cost.
- 22 April 2020
- Published by Springer Nature in Scientific Reports
- Vol. 10 (1) , 1-16
Open AccessPerovskite Solar Cells: A Porous Graphitic Carbon based Hole Transporter/Counter Electrode Material Extracted from an Invasive Plant Species Eichhornia Crassipes
Perovskite solar cells (PSCs) composed of organic polymer-based hole-transporting materials (HTMs) are considered to be an important strategy in improving the device performance, to compete with conventional solar cells. Yet the use of such expensive and unstable HTMs, together with hygroscopic perovskite structure remains a concern – an arguable aspect for the prospect of onsite photovoltaic (PV) application. Herein, we have demonstrated the sustainable fabrication of efficient and air-stable PSCs composed of an invasive plant (Eichhornia crassipes) extracted porous graphitic carbon (EC-GC) which plays a dual role as HTM/counter electrode. The changes in annealing temperature (~450 °C, ~850 °C and ~1000 °C) while extracting the EC-GC, made a significant impact on the degree of graphitization - a remarkable criterion in determining the device performance. Hence, the fabricated champion device-1c: Glass/FTO/c-TiO2/mp-TiO2/CH3NH3PbI3−xClx/EC-GC10@CH3NH3PbI3−x Clx/EC-GC10) exhibited a PCE of 8.52%. Surprisingly, the introduced EC-GC10 encapsulated perovskite interfacial layer at the perovskite/HTM interface helps in overcoming the moisture degradation of the hygroscopic perovskite layer in which the same champion device-1c evinced better air stability retaining its efficiency ~94.40% for 1000 hours. We believe that this present work on invasive plant extracted carbon playing a dual role, together as an interfacial layer may pave the way towards a reliable perovskite photovoltaic device at low-cost.
- 17 April 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (20) , 8422-8433
Interfacing green synthesized flake like-ZnO with TiO 2 for bilayer electron extraction in perovskite solar cells
To improve the performance of PSCs, it is essential to prevent the carrier recombination losses at the interfaces of the transparent metal oxide electrode/electron transport layer (ETL)/active absorber perovskite layer. This present work reports on the green synthesis approach used for the preparation of flake like-ZnO nanostructure (GF-ZnO NS), naturally extracted from the leaf of Albizia Amara, used as a reducing cum capping agent. Herein, we have introduced an n-type GF-ZnO NS material as an efficient electron transport interfacial layer (bi-ETL) at the ETL/perovskite junction in the fabricated perovskite solar cells (PSCs). The structure of the fabricated PSC device is as follows: glass/ITO/bi-ETL (c-TiO2/GF-ZnO NSs)/CH3NH3PbI3−xClx/spiro-MeOTAD/Au. A comparative study has also been carried out by deploying electron transport materials such as c-TiO2 and GF-ZnO NSs separately. From this, it has been found that the bi-ETL perovskite solar cell devices achieved a maximum power conversion efficiency (PCE) of 7.83% with an open-circuit voltage (VOC) of 0.728 V, a short circuit current density (JSC) of 20.46 mA cm−2 and a fill factor (FF) of 52.61% whereas, the c-TiO2, GF-ZnO NSs and the chemically reduced CR-ZnO ETL based devices achieved a PCE of 4.84%, 5.82% and 6.81%, respectively. The better performance obtained for the bi-ETL based devices is ascribed to the enhanced carrier extraction and the reduced recombination losses at the interface between the ETL and the active perovskite layer.
- 17 April 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (20) , 8422-8433
Interfacing green synthesized flake like-ZnO with TiO 2 for bilayer electron extraction in perovskite solar cells
To improve the performance of PSCs, it is essential to prevent the carrier recombination losses at the interfaces of the transparent metal oxide electrode/electron transport layer (ETL)/active absorber perovskite layer. This present work reports on the green synthesis approach used for the preparation of flake like-ZnO nanostructure (GF-ZnO NS), naturally extracted from the leaf of Albizia Amara, used as a reducing cum capping agent. Herein, we have introduced an n-type GF-ZnO NS material as an efficient electron transport interfacial layer (bi-ETL) at the ETL/perovskite junction in the fabricated perovskite solar cells (PSCs). The structure of the fabricated PSC device is as follows: glass/ITO/bi-ETL (c-TiO2/GF-ZnO NSs)/CH3NH3PbI3−xClx/spiro-MeOTAD/Au. A comparative study has also been carried out by deploying electron transport materials such as c-TiO2 and GF-ZnO NSs separately. From this, it has been found that the bi-ETL perovskite solar cell devices achieved a maximum power conversion efficiency (PCE) of 7.83% with an open-circuit voltage (VOC) of 0.728 V, a short circuit current density (JSC) of 20.46 mA cm−2 and a fill factor (FF) of 52.61% whereas, the c-TiO2, GF-ZnO NSs and the chemically reduced CR-ZnO ETL based devices achieved a PCE of 4.84%, 5.82% and 6.81%, respectively. The better performance obtained for the bi-ETL based devices is ascribed to the enhanced carrier extraction and the reduced recombination losses at the interface between the ETL and the active perovskite layer.
- Open Access
Ruthenium (Ru) Doped Titanium Dioxide (P25) Electrode for Dye Sensitized Solar Cells
In this study, P25-titanium dioxide (TiO2) was doped with ruthenium (Ru) by systematically varying the Ru content at 0.15, 0.30, 0.45 and 0.6 mol%. The synthesized Ru-doped TiO2 nanomaterials have been characterized by X-ray diffraction (XRD), Raman spectroscopy, energy-dispersive X-ray (EDX) analysis, UV-visible (UV–Vis) spectroscopy, and electrochemical impedance (EIS) spectroscopy. The XRD patterns of undoped and Ru-doped TiO2 nanomaterials confirm the presence of mixed anatase and rutile phases of TiO2 while EDX spectrum confirms the presence of Ti, O and Ru. Further, UV-visible absorption spectra of doped TiO2 nanomaterial reveal a slight red shift on Ru-doping. The short circuit current density (JSC) of the cells fabricated using the Ru-doped TiO2 photoanode was found to be dependent on the amount of Ru present in TiO2. Optimized cells with 0.3 mol% Ru-doped TiO2 electrodes showed efficiency which is 20% more than the efficiency of the control cell (η = 5.8%) under stimulated illumination (100 mWcm−2, 1 sun) with AM 1.5 filter. The increase in JSC resulted from the reduced rate of recombination upon doping of Ru and this was confirmed by EIS analysis.
Open AccessRuthenium (Ru) Doped Titanium Dioxide (P25) Electrode for Dye Sensitized Solar Cells
In this study, P25-titanium dioxide (TiO2) was doped with ruthenium (Ru) by systematically varying the Ru content at 0.15, 0.30, 0.45 and 0.6 mol%. The synthesized Ru-doped TiO2 nanomaterials have been characterized by X-ray diffraction (XRD), Raman spectroscopy, energy-dispersive X-ray (EDX) analysis, UV-visible (UV–Vis) spectroscopy, and electrochemical impedance (EIS) spectroscopy. The XRD patterns of undoped and Ru-doped TiO2 nanomaterials confirm the presence of mixed anatase and rutile phases of TiO2 while EDX spectrum confirms the presence of Ti, O and Ru. Further, UV-visible absorption spectra of doped TiO2 nanomaterial reveal a slight red shift on Ru-doping. The short circuit current density (JSC) of the cells fabricated using the Ru-doped TiO2 photoanode was found to be dependent on the amount of Ru present in TiO2. Optimized cells with 0.3 mol% Ru-doped TiO2 electrodes showed efficiency which is 20% more than the efficiency of the control cell (η = 5.8%) under stimulated illumination (100 mWcm−2, 1 sun) with AM 1.5 filter. The increase in JSC resulted from the reduced rate of recombination upon doping of Ru and this was confirmed by EIS analysis.
- 5 July 2016
- Published by Springer Nature in Applied Physics A
- Vol. 122 (8) , 1-9
Sea grass like arranged TiO2 nanorods sensitized by natural dyes for solar cell applications
- 5 July 2016
- Published by Springer Nature in Applied Physics A
- Vol. 122 (8) , 1-9
Sea grass like arranged TiO2 nanorods sensitized by natural dyes for solar cell applications
- 1 July 2015
- Published by Elsevier in Journal of Photochemistry and Photobiology B: Biology
- Vol. 148, 223-231
Natural dye sensitized TiO2 nanorods assembly of broccoli shape based solar cells
- 1 July 2015
- Published by Elsevier in Journal of Photochemistry and Photobiology B: Biology
- Vol. 148, 223-231
Natural dye sensitized TiO2 nanorods assembly of broccoli shape based solar cells
- 5 June 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (15) , 8585-8589
High-efficiency inverted organic solar cells with polyethylene oxide-modified Zn-doped TiO2as an interfacial electron transport layer
High efficiency inverted organic solar cells are fabricated using the PTB7:PC71BM polymer by incorporating Zn-doped TiO2 (ZTO) and 0.05 wt% PEO:ZTO as interfacial electron transport layers. The 0.05 wt% PEO-modified ZTO device shows a significantly increased power conversion efficiency (PCE) of 8.10%, compared to that of the ZTO (7.67%) device.
- 5 June 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (15) , 8585-8589
High-efficiency inverted organic solar cells with polyethylene oxide-modified Zn-doped TiO2as an interfacial electron transport layer
High efficiency inverted organic solar cells are fabricated using the PTB7:PC71BM polymer by incorporating Zn-doped TiO2 (ZTO) and 0.05 wt% PEO:ZTO as interfacial electron transport layers. The 0.05 wt% PEO-modified ZTO device shows a significantly increased power conversion efficiency (PCE) of 8.10%, compared to that of the ZTO (7.67%) device.
- 30 April 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (29) , 11426-11431
Enhanced power conversion efficiency of inverted organic solar cells by using solution processed Sn-doped TiO2 as an electron transport layer
We have investigated the photovoltaic properties of inverted solar cells comprising a bulk heterojunction film of thieno[3,4-b]-thiophene/benzodithiophene (PTB7) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), sandwiched between indium tin oxide (ITO)/Sn-doped TiO2 front and MoO3/aluminum back electrodes. The inverted organic solar cell (IOSC) fabricated with a Sn-doped TiO2 film showed a significantly greater power conversion efficiency of 7.59%, compared to that of the TiO2 film (6.70%). Further studies confirm that the improved morphology and electrical properties of the Sn-doped TiO2 film result in reduced shunt loss and interfacial charge recombination and hence enhanced photovoltaic performance.
- 30 April 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 2 (29) , 11426-11431
Enhanced power conversion efficiency of inverted organic solar cells by using solution processed Sn-doped TiO2 as an electron transport layer
We have investigated the photovoltaic properties of inverted solar cells comprising a bulk heterojunction film of thieno[3,4-b]-thiophene/benzodithiophene (PTB7) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), sandwiched between indium tin oxide (ITO)/Sn-doped TiO2 front and MoO3/aluminum back electrodes. The inverted organic solar cell (IOSC) fabricated with a Sn-doped TiO2 film showed a significantly greater power conversion efficiency of 7.59%, compared to that of the TiO2 film (6.70%). Further studies confirm that the improved morphology and electrical properties of the Sn-doped TiO2 film result in reduced shunt loss and interfacial charge recombination and hence enhanced photovoltaic performance.
- 18 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 1 (48) , 8161-8166
High performance inverted organic solar cells with solution processed Ga-doped ZnO as an interfacial electron transport layer
We demonstrate solution-processed Ga-doped ZnO incorporated as an interfacial electron transport layer into inverted organic solar cells with active layers comprising either PCDTBT or PTB7 mixed with PC71BM. The 5.03 at% Ga-doped ZnO showed the best efficiencies of 5.56% and 7.34% for PCDTBT and PTB7 polymers respectively.
- 18 October 2013
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 1 (48) , 8161-8166
High performance inverted organic solar cells with solution processed Ga-doped ZnO as an interfacial electron transport layer
We demonstrate solution-processed Ga-doped ZnO incorporated as an interfacial electron transport layer into inverted organic solar cells with active layers comprising either PCDTBT or PTB7 mixed with PC71BM. The 5.03 at% Ga-doped ZnO showed the best efficiencies of 5.56% and 7.34% for PCDTBT and PTB7 polymers respectively.
- 5 March 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (12) , 3254-3258
Strong quantum confinement effect in nanocrystalline CdS
- 5 March 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 45 (12) , 3254-3258
Strong quantum confinement effect in nanocrystalline CdS
- 1 August 2008
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 92 (8) , 851-856
Electrical conduction studies of hot wall deposited CdSexTe1−x thin films
- 1 August 2008
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 92 (8) , 851-856
Electrical conduction studies of hot wall deposited CdSexTe1−x thin films