Myint Win Bo
Research Subjects
Research Interests
Myint Win Bo has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Arul Arulrajah
Professor, Dept. of Civil and Construction Engineering, Swinburne Univ. of Technology, Melbourne, VIC 3122, Australia. ORCID:
9 shared publications - Mahdi Miri Disfani
The University of Melbourne
5 shared publications - Jegatheesan Piratheepan
Lecturer, Swinburne Univ. of Technology, Melbourne, VIC3122, Australia
4 shared publications - Aminur Rahman
Ph.D. Student, Faculty of Engineering and Industrial Sciences, Swinburne Univ. of Technology, P.O. Box 218, Hawthorn, VIC 3122, Australia
2 shared publications - M. M. Y. Ali
Ph.D. Candidate, Swinburne University of Technology, Melbourne, Australia, P.O. Box 218, Hawthorn, VIC 3122
2 shared publications - Monzur Alam Imteaz
Department of Civil and Construction Engineering Swinburne University of Technology Hawthorn Victoria Australia
2 shared publications
Latest Publications
- Top Cited Papers
- 1 July 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 28 (7)
Stabilization of Demolition Materials for Pavement Base/Subbase Applications Using Fly Ash and Slag Geopolymers: Laboratory Investigation
The use of recycled construction and demolition (C&D) materials in unbound and cement stabilized pavement base/subbase applications has generated growing interest in recent years. C&D materials consisting of crushed brick (CB), recycled crushed aggregate (RCA), and reclaimed asphalt pavement (RAP) have been investigated in unbound and cement stabilized pavement base/subbase applications. However, the high carbon footprint of using cement for pavement base/subbase stabilization has led to this research to seek alternative low-carbon binders. This study evaluates the behavior of C&D materials when stabilized with geopolymers. Fly ash (FA) and ground granulated blast furnace slag (S) were used as pozzolanic binders and a different alkaline activator solution to pozzolanic binder ratio was tested. A maximum of 4% of dry weight of soil was used for geopolymer stabilization of the C&D materials. The binders used were either 4% FA, 2% FA+ 2% S, or 4% S. The geotechnical engineering and strength propertie...
- 1 July 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 28 (7)
Top Cited PapersStabilization of Demolition Materials for Pavement Base/Subbase Applications Using Fly Ash and Slag Geopolymers: Laboratory Investigation
The use of recycled construction and demolition (C&D) materials in unbound and cement stabilized pavement base/subbase applications has generated growing interest in recent years. C&D materials consisting of crushed brick (CB), recycled crushed aggregate (RCA), and reclaimed asphalt pavement (RAP) have been investigated in unbound and cement stabilized pavement base/subbase applications. However, the high carbon footprint of using cement for pavement base/subbase stabilization has led to this research to seek alternative low-carbon binders. This study evaluates the behavior of C&D materials when stabilized with geopolymers. Fly ash (FA) and ground granulated blast furnace slag (S) were used as pozzolanic binders and a different alkaline activator solution to pozzolanic binder ratio was tested. A maximum of 4% of dry weight of soil was used for geopolymer stabilization of the C&D materials. The binders used were either 4% FA, 2% FA+ 2% S, or 4% S. The geotechnical engineering and strength propertie...
- 1 May 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 26 (5) , 974-982
Evaluation of Interface Shear Strength Properties of Geogrid-Reinforced Construction and Demolition Materials Using a Modified Large-Scale Direct Shear Testing Apparatus
The interface shear strength properties of geogrid-reinforced construction and demolition (C&D) aggregates were determined using a modified large scale direct shear test (DST) apparatus. Comparisons were made between the results of the various C&D aggregates reinforced with biaxial and triaxial geogrids and with the unreinforced aggregates by means of the modified and conventional DST methods. The modified DST method employed sought to increase interlocking between the C&D aggregates with the geogrids and thus ascertains the true interface shear strength properties of the recycled demolition aggregates. Biaxial and triaxial geogrids were used as the geogrid-reinforcement materials. The C&D aggregates tested with the DST were recycled concrete aggregate (RCA), crushed brick (CB), and reclaimed asphalt pavement (RAP). The modified DST results indicated that the interface shear strength properties of the geogrid-reinforced C&D aggregates were higher than that of the conventional test method and the r...
- 1 May 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 26 (5) , 974-982
Evaluation of Interface Shear Strength Properties of Geogrid-Reinforced Construction and Demolition Materials Using a Modified Large-Scale Direct Shear Testing Apparatus
The interface shear strength properties of geogrid-reinforced construction and demolition (C&D) aggregates were determined using a modified large scale direct shear test (DST) apparatus. Comparisons were made between the results of the various C&D aggregates reinforced with biaxial and triaxial geogrids and with the unreinforced aggregates by means of the modified and conventional DST methods. The modified DST method employed sought to increase interlocking between the C&D aggregates with the geogrids and thus ascertains the true interface shear strength properties of the recycled demolition aggregates. Biaxial and triaxial geogrids were used as the geogrid-reinforcement materials. The C&D aggregates tested with the DST were recycled concrete aggregate (RCA), crushed brick (CB), and reclaimed asphalt pavement (RAP). The modified DST results indicated that the interface shear strength properties of the geogrid-reinforced C&D aggregates were higher than that of the conventional test method and the r...
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 3615-3624
Effect of Geogrids on Interface Shear Strength Properties of Recycled Crushed Brick
Construction and demolition (C&D) materials are defined as the materials obtained from demolition activities such as crushed concrete, crushed brick, and reclaimed asphalt. The disposal of these materials in landfills is a major problem for the environment. The urgency and significance of recycling C&D materials has been raised because of the scarcity of natural aggregates, difficulties in finding landfill, and other environmental concerns. Hence, the present paper describes the physical and geotechnical characteristics of recycled crushed brick (CB) to reuse in different civil engineering applications. The laboratory experiments involved modified compaction test, particle size distribution, specific gravity, water absorption, and Los Angeles abrasion. Furthermore, the interface shear strength properties of the CB material with geogrids and their performance as a pavement subbase material was ascertained by using a large direct shear testing (DST) apparatus. The higher tensile strength triaxial geogrid was found to attain higher interface shear strength properties than that of the lower tensile strength biaxial geogrid. The DST results, however, indicated that the interface shear strength properties of the geogrid-reinforced CB material were less than that of the respective material without reinforcement. The results were also found to meet the peak and residual shear strength and local road authority requirements for typical construction materials in civil engineering applications.
- 24 February 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 3615-3624
Effect of Geogrids on Interface Shear Strength Properties of Recycled Crushed Brick
Construction and demolition (C&D) materials are defined as the materials obtained from demolition activities such as crushed concrete, crushed brick, and reclaimed asphalt. The disposal of these materials in landfills is a major problem for the environment. The urgency and significance of recycling C&D materials has been raised because of the scarcity of natural aggregates, difficulties in finding landfill, and other environmental concerns. Hence, the present paper describes the physical and geotechnical characteristics of recycled crushed brick (CB) to reuse in different civil engineering applications. The laboratory experiments involved modified compaction test, particle size distribution, specific gravity, water absorption, and Los Angeles abrasion. Furthermore, the interface shear strength properties of the CB material with geogrids and their performance as a pavement subbase material was ascertained by using a large direct shear testing (DST) apparatus. The higher tensile strength triaxial geogrid was found to attain higher interface shear strength properties than that of the lower tensile strength biaxial geogrid. The DST results, however, indicated that the interface shear strength properties of the geogrid-reinforced CB material were less than that of the respective material without reinforcement. The results were also found to meet the peak and residual shear strength and local road authority requirements for typical construction materials in civil engineering applications.
- 1 November 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (11) , 1682-1691
Laboratory Evaluation of the Geotechnical Characteristics of Wastewater Biosolids in Road Embankments
An extensive suite of geotechnical laboratory tests were undertaken on wastewater biosolids to evaluate their sustainable usage as a fill material in road embankments. Geotechnical tests undertaken include particle size distribution, specific gravity, Atterberg limits, compaction, consolidation, hydraulic conductivity, California bearing ratio (CBR), field vane shear, direct shear, and triaxial shear. The geotechnical tests indicated that biosolids are equivalent to organic fine-grained soils of medium to high plasticity with high moisture content and liquid limit values. Consolidation tests indicate that biosolids have similar consolidation characteristics to that of organic soils. Shear strength tests on compacted biosolids samples indicated relatively high internal friction angles, comparable to that of inorganic silts. Compacted biosolids samples exhibit a modest cohesion comparable to organic clays. CBR tests results indicate high deformation potential of biosolids. Chemical and environmental...
- 1 November 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (11) , 1682-1691
Laboratory Evaluation of the Geotechnical Characteristics of Wastewater Biosolids in Road Embankments
An extensive suite of geotechnical laboratory tests were undertaken on wastewater biosolids to evaluate their sustainable usage as a fill material in road embankments. Geotechnical tests undertaken include particle size distribution, specific gravity, Atterberg limits, compaction, consolidation, hydraulic conductivity, California bearing ratio (CBR), field vane shear, direct shear, and triaxial shear. The geotechnical tests indicated that biosolids are equivalent to organic fine-grained soils of medium to high plasticity with high moisture content and liquid limit values. Consolidation tests indicate that biosolids have similar consolidation characteristics to that of organic soils. Shear strength tests on compacted biosolids samples indicated relatively high internal friction angles, comparable to that of inorganic silts. Compacted biosolids samples exhibit a modest cohesion comparable to organic clays. CBR tests results indicate high deformation potential of biosolids. Chemical and environmental...
- Top Cited Papers
- 1 August 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (8) , 1077-1088
Geotechnical and Geoenvironmental Properties of Recycled Construction and Demolition Materials in Pavement Subbase Applications
A comprehensive laboratory evaluation of the geotechnical and geoenvironmental properties of five predominant types of construction and demolition (C&D) waste materials was undertaken in this research study. The C&D materials tested were recycled concrete aggregate (RCA), crushed brick (CB), waste rock (WR), reclaimed asphalt pavement (RAP), and fine recycled glass (FRG). The geotechnical assessment included particle size distribution, particle density, water absorption, compaction, Los Angeles abrasion, postcompaction sieve analysis, flakiness index, hydraulic conductivity and California bearing ratio (CBR) tests. Shear strength properties of the materials were studied through a series of triaxial tests. Consolidated drained triaxial tests undertaken on the recycled materials indicated that the recycled materials had a drained cohesion ranging from 41 kPa to 46 kPa and a drained friction angle ranging from 49° to 51°, with the exception of FRG and RAP. The response of the materials under repeated...
- 1 August 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (8) , 1077-1088
Top Cited PapersGeotechnical and Geoenvironmental Properties of Recycled Construction and Demolition Materials in Pavement Subbase Applications
A comprehensive laboratory evaluation of the geotechnical and geoenvironmental properties of five predominant types of construction and demolition (C&D) waste materials was undertaken in this research study. The C&D materials tested were recycled concrete aggregate (RCA), crushed brick (CB), waste rock (WR), reclaimed asphalt pavement (RAP), and fine recycled glass (FRG). The geotechnical assessment included particle size distribution, particle density, water absorption, compaction, Los Angeles abrasion, postcompaction sieve analysis, flakiness index, hydraulic conductivity and California bearing ratio (CBR) tests. Shear strength properties of the materials were studied through a series of triaxial tests. Consolidated drained triaxial tests undertaken on the recycled materials indicated that the recycled materials had a drained cohesion ranging from 41 kPa to 46 kPa and a drained friction angle ranging from 49° to 51°, with the exception of FRG and RAP. The response of the materials under repeated...
- 4 July 2013
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 77, 69-77
Long-term settlement prediction for wastewater biosolids in road embankments
- 4 July 2013
- Published by Elsevier in Resources, Conservation and Recycling
- Vol. 77, 69-77
Long-term settlement prediction for wastewater biosolids in road embankments
- 1 May 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (5) , 653-661
Geotechnical Performance of Recycled Glass-Waste Rock Blends in Footpath Bases
Laboratory and field experiments were undertaken to investigate the possible application of recycled crushed glass blended with crushed basaltic waste rock as a footpath base material. The laboratory experimental program included basic and specialized geotechnical tests including particle size distribution, modified Proctor compaction, particle density, water absorption, California bearing ratio (CBR), Los Angeles abrasion, pH, organic content, and triaxial shear tests. A field demonstration footpath comprising two sections of recycled glass-waste rock blends with 15% and 30% recycled glass content and a third control section with only waste rock was subsequently constructed on the basis of the outcomes of the initial laboratory tests. Subsequently field tests with a nuclear density gauge and Clegg impact hammer were undertaken, as well as laboratory testing of field samples to assess the geotechnical performance of the trial sections. The field and laboratory test results indicated that adding cr...
- 1 May 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (5) , 653-661
Geotechnical Performance of Recycled Glass-Waste Rock Blends in Footpath Bases
Laboratory and field experiments were undertaken to investigate the possible application of recycled crushed glass blended with crushed basaltic waste rock as a footpath base material. The laboratory experimental program included basic and specialized geotechnical tests including particle size distribution, modified Proctor compaction, particle density, water absorption, California bearing ratio (CBR), Los Angeles abrasion, pH, organic content, and triaxial shear tests. A field demonstration footpath comprising two sections of recycled glass-waste rock blends with 15% and 30% recycled glass content and a third control section with only waste rock was subsequently constructed on the basis of the outcomes of the initial laboratory tests. Subsequently field tests with a nuclear density gauge and Clegg impact hammer were undertaken, as well as laboratory testing of field samples to assess the geotechnical performance of the trial sections. The field and laboratory test results indicated that adding cr...
- 1 July 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 24 (7) , 924-932
Geotechnical Properties of Waste Excavation Rock in Pavement Subbase Applications
This paper presents the findings of an extensive laboratory investigation on the geotechnical properties of waste excavation rock in pavement subbases. The waste excavation rock used in this study originated from “basalt floaters,” or surface excavation basalt rock (basalt). Traditionally, this material would have been disposed as waste, often into landfill. The engineering properties of the crushed basaltic waste rock were compared with the local road authority specifications to assess its performance as a pavement subbase material. The experimental program was extensive and included tests such as particle size distribution, modified Proctor compaction, particle density, water absorption, California bearing ratio, Los Angeles abrasion loss, pH, organic content, static triaxial, and repeated load triaxial tests. The Los Angeles abrasion loss value obtained indicated that the crushed basaltic waste rock is durable. California bearing ratio values were found to satisfy the local state road authority...
- 1 July 2012
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 24 (7) , 924-932
Geotechnical Properties of Waste Excavation Rock in Pavement Subbase Applications
This paper presents the findings of an extensive laboratory investigation on the geotechnical properties of waste excavation rock in pavement subbases. The waste excavation rock used in this study originated from “basalt floaters,” or surface excavation basalt rock (basalt). Traditionally, this material would have been disposed as waste, often into landfill. The engineering properties of the crushed basaltic waste rock were compared with the local road authority specifications to assess its performance as a pavement subbase material. The experimental program was extensive and included tests such as particle size distribution, modified Proctor compaction, particle density, water absorption, California bearing ratio, Los Angeles abrasion loss, pH, organic content, static triaxial, and repeated load triaxial tests. The Los Angeles abrasion loss value obtained indicated that the crushed basaltic waste rock is durable. California bearing ratio values were found to satisfy the local state road authority...
- 15 August 2010
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 29 (1) , 65-74
Laboratory Validation of Ultra-Soft Soil Deformation Model
- 15 August 2010
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 29 (1) , 65-74
Laboratory Validation of Ultra-Soft Soil Deformation Model