Xiao-Ling Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiao-Ling Zhao has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Chao Wu
Imperial College London
2 shared publications Riadh Al-Mahaidi
Professor, Faculty of Engineering and Industrial Sciences, Swinburne Univ. of Technology, Burwood Highway, Hawthorn, VIC 3122, Australia
2 shared publications- Wen Hui Duan
Department of Civil Engineering, Monash University, Clayton, VIC, Australia
2 shared publications - Alex Remennikov
University of Wollongong
1 shared publication - Alfred Strauss
Institute of Structural Engineering, Department of Civil Engineering and Natural Hazards University of Natural Resources and Life Sciences Vienna Austria
1 shared publication - Bruce R. Ellingwood
Department of Civil and Environmental Engineering, Colorado State University
1 shared publication
Latest Publications
- 1 October 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 22 (5)
Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments
This paper presents an experimental study on the bond durability of basalt fiber–reinforced polymer (BFRP) bars, steel–fiber reinforced polymer (FRP) composite bars (SFCB), and steel bars embedded in seawater sea-sand concrete (SWSSC) and subject to a simulated ocean environment. The effects of the environment type, exposure period (i.e., 3, 6, and 9 months), and reinforcement type on bond durability were investigated. The degradation mechanism was analyzed using scanning electron microscopy (SEM). The test results showed that after being conditioned, the failure mode changed from shear failure at the BFRP rib-concrete occlusal interface to the peeling of the BFRP surface. For the BFRP bars, after 9 months of aging, the bond stress retention was 92% in the wet-dry cycling environment and 78% in the immersion environment. For the SFCBs, after 9 months of aging, the retention in the wet-dry cycling environment was 100% and that in the immersion environment was 90%. For the steel bars, although there was no reduction in bond strength, pitting corrosion was observed at the bar surface. The predicted bond stress retention of BFRP bars embedded in SWSSC after 50 years of service life in various environmental conditions ranged from 47% to 83%.
- 1 October 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 22 (5)
Long-Term Bond Durability of Fiber-Reinforced Polymer Bars Embedded in Seawater Sea-Sand Concrete under Ocean Environments
This paper presents an experimental study on the bond durability of basalt fiber–reinforced polymer (BFRP) bars, steel–fiber reinforced polymer (FRP) composite bars (SFCB), and steel bars embedded in seawater sea-sand concrete (SWSSC) and subject to a simulated ocean environment. The effects of the environment type, exposure period (i.e., 3, 6, and 9 months), and reinforcement type on bond durability were investigated. The degradation mechanism was analyzed using scanning electron microscopy (SEM). The test results showed that after being conditioned, the failure mode changed from shear failure at the BFRP rib-concrete occlusal interface to the peeling of the BFRP surface. For the BFRP bars, after 9 months of aging, the bond stress retention was 92% in the wet-dry cycling environment and 78% in the immersion environment. For the SFCBs, after 9 months of aging, the retention in the wet-dry cycling environment was 100% and that in the immersion environment was 90%. For the steel bars, although there was no reduction in bond strength, pitting corrosion was observed at the bar surface. The predicted bond stress retention of BFRP bars embedded in SWSSC after 50 years of service life in various environmental conditions ranged from 47% to 83%.
- 1 October 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 21 (5)
Experimental Study on FRP-Strengthened Steel Tubular Members under Lateral Impact
Hollow structural members are highly vulnerable structural components subjected to transverse impact loads. These tubular members have been used widely in both onshore and offshore structures where lateral impact forces can be expected from moving vehicles/vessels or terrorist attacks. Thus, strengthening of steel hollow tubular members is required to safely carry both service static and imposed dynamic impact loads. This paper presents the results from a series of tests on bare and fiber-reinforced polymer (FRP) strengthened circular hollow-section (CHS) steel members subjected to transverse impact loading at midspan. A total of 14 (2 bare and 12 strengthened) medium-scale specimens were tested to investigate the effect of FRP wrapping on the global and local deformation capacities of strengthened members under drop-hammer impact. Both carbon-fiber-reinforced polymer (CFRP) and glass-fiber-reinforced polymer (GFRP) sheets were used as strengthening materials. The results indicate that the FRP strengthening of the tubes enhances their impact-resistance capacity by reducing lateral displacements up to 29% compared to bare steel CHS specimens. The influence of FRP type, CFRP orientation, CFRP thickness, and effective bond length on the structural response and failure behavior of wrapped members were investigated. The results showed that the application of FRP in the longitudinal direction was effective to control the global deformations whereas the hoop layers were effective in reducing local inward deformations of CHS members.
- 1 October 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 21 (5)
Experimental Study on FRP-Strengthened Steel Tubular Members under Lateral Impact
Hollow structural members are highly vulnerable structural components subjected to transverse impact loads. These tubular members have been used widely in both onshore and offshore structures where lateral impact forces can be expected from moving vehicles/vessels or terrorist attacks. Thus, strengthening of steel hollow tubular members is required to safely carry both service static and imposed dynamic impact loads. This paper presents the results from a series of tests on bare and fiber-reinforced polymer (FRP) strengthened circular hollow-section (CHS) steel members subjected to transverse impact loading at midspan. A total of 14 (2 bare and 12 strengthened) medium-scale specimens were tested to investigate the effect of FRP wrapping on the global and local deformation capacities of strengthened members under drop-hammer impact. Both carbon-fiber-reinforced polymer (CFRP) and glass-fiber-reinforced polymer (GFRP) sheets were used as strengthening materials. The results indicate that the FRP strengthening of the tubes enhances their impact-resistance capacity by reducing lateral displacements up to 29% compared to bare steel CHS specimens. The influence of FRP type, CFRP orientation, CFRP thickness, and effective bond length on the structural response and failure behavior of wrapped members were investigated. The results showed that the application of FRP in the longitudinal direction was effective to control the global deformations whereas the hoop layers were effective in reducing local inward deformations of CHS members.
- 1 September 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (9)
Reliability-Based Performance Indicators for Structural Members
The implementation of reliability methods for designing new structures and assessing the safety and evaluating the performance of existing structures and infrastructure systems has gained widespread acceptance. Consequently, reliability-based design specifications in the form of load and resistance factor design (LRFD) methods have dominated the development of current codes and standards. This paper reviews the reliability-based performance criteria used to calibrate design and evaluation codes and standards for assessing the strength, serviceability, and fatigue resistance of structural components. The review shows that large differences exist in the target reliability levels adopted for evaluating the strength of various types of structural members and materials. These differences result from many factors, including (1) intended structure design and service life; (2) expected member modes of failure (e.g., ductile or brittle); (3) importance of the individual member to overall system integrity (...
- 1 September 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (9)
Reliability-Based Performance Indicators for Structural Members
The implementation of reliability methods for designing new structures and assessing the safety and evaluating the performance of existing structures and infrastructure systems has gained widespread acceptance. Consequently, reliability-based design specifications in the form of load and resistance factor design (LRFD) methods have dominated the development of current codes and standards. This paper reviews the reliability-based performance criteria used to calibrate design and evaluation codes and standards for assessing the strength, serviceability, and fatigue resistance of structural components. The review shows that large differences exist in the target reliability levels adopted for evaluating the strength of various types of structural members and materials. These differences result from many factors, including (1) intended structure design and service life; (2) expected member modes of failure (e.g., ductile or brittle); (3) importance of the individual member to overall system integrity (...
- 1 December 2014
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 17 (12) , 1729-1746
Evaluation of Stress Intensity Factor for CFRP Bonded Steel Plates
Recent studies on the application of carbon fibre reinforced polymer (CFRP) materials to defected steel structures have demonstrated the potential for significant reduction of stress intensity factor (SIF) values at crack tips leading to extended fatigue lives. However, most of the previous research relied on experimental and numerical methods, which were either expensive or time-consuming. In this paper, the SIF values at crack tips of steel plates strengthened with bonded composite materials were evaluated using linear elastic fracture mechanics. The analysis was based on the classical solution of SIF values of plain steel plates, considering load share effect and geometry correction factor change resulted from the overlay patch. The effect of different parameters were demonstrated and compared with experimental results, including initial damage degrees of specimens, geometric and mechanical properties of retrofitting materials and bond locations. Good agreement with the experimental data indicated that this approach could conservatively predict the SIF values with reasonable accuracy. A parametric study on variables including the CFRP modulus, the bond width and bond length was conducted based on this method to further investigate their effect on the SIF values.
- 1 December 2014
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 17 (12) , 1729-1746
Evaluation of Stress Intensity Factor for CFRP Bonded Steel Plates
Recent studies on the application of carbon fibre reinforced polymer (CFRP) materials to defected steel structures have demonstrated the potential for significant reduction of stress intensity factor (SIF) values at crack tips leading to extended fatigue lives. However, most of the previous research relied on experimental and numerical methods, which were either expensive or time-consuming. In this paper, the SIF values at crack tips of steel plates strengthened with bonded composite materials were evaluated using linear elastic fracture mechanics. The analysis was based on the classical solution of SIF values of plain steel plates, considering load share effect and geometry correction factor change resulted from the overlay patch. The effect of different parameters were demonstrated and compared with experimental results, including initial damage degrees of specimens, geometric and mechanical properties of retrofitting materials and bond locations. Good agreement with the experimental data indicated that this approach could conservatively predict the SIF values with reasonable accuracy. A parametric study on variables including the CFRP modulus, the bond width and bond length was conducted based on this method to further investigate their effect on the SIF values.
- 1 June 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 18 (3)
Effect of Dynamic Loading and Environmental Conditions on the Bond between CFRP and Steel: State-of-the-Art Review
Carbon fiber reinforced polymer (CFRP) has great potential in strengthening steel structures and the bond between CFRP and steel is a critical issue in the strengthening technique. State-of-the-art reviews have been reported in the literature on the bond behavior between CFRP and steel under static loading at ambient temperature. However, steel structures are often subjected to dynamic loading and harsh environment conditions, and the bond between CFRP and steel may be affected by these conditions. This paper presents a state-of-the-art review on the effects of dynamic loading (e.g., fatigue, impact, and earthquake) and environmental conditions (e.g., subzero temperatures, elevated temperatures, sea water, and ultraviolet light) on the bond between CFRP and steel. The combined effect of applied loading and environmental conditions is also included. Directions for future research are indicated and a comprehensive reference list is provided.
- 1 June 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 18 (3)
Effect of Dynamic Loading and Environmental Conditions on the Bond between CFRP and Steel: State-of-the-Art Review
Carbon fiber reinforced polymer (CFRP) has great potential in strengthening steel structures and the bond between CFRP and steel is a critical issue in the strengthening technique. State-of-the-art reviews have been reported in the literature on the bond behavior between CFRP and steel under static loading at ambient temperature. However, steel structures are often subjected to dynamic loading and harsh environment conditions, and the bond between CFRP and steel may be affected by these conditions. This paper presents a state-of-the-art review on the effects of dynamic loading (e.g., fatigue, impact, and earthquake) and environmental conditions (e.g., subzero temperatures, elevated temperatures, sea water, and ultraviolet light) on the bond between CFRP and steel. The combined effect of applied loading and environmental conditions is also included. Directions for future research are indicated and a comprehensive reference list is provided.
- 1 April 2014
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 17 (4) , 461-470
A Framework for the Integration of Performance Based Design and Life Cycle Assessment to Design Sustainable Structures
Sustainability is an issue that has become of key importance to the engineering industry. An important definition for sustainability is True Sustainability: a concept often termed the Triple Bottom Line Approach, which involves the balance of Economic, Social and Environmental sustainability. At present the focus on sustainable design within the engineering profession is on Environmental Sustainability and Green Design. This focus is too narrow with engineering systems not considering the other components of sustainability emphasizing the need for sustainable design to have a broader scope. This paper presents a framework attempting to overcome this narrow focus through the integration of two separate engineering design techniques, Performance Based Design and Life Cycle Assessment. The framework is a 6-step process that combines these two techniques through establishment of common goals. This integration presents a logical methodology that may be adopted by engineering professionals to design engineering systems to achieve True Sustainability. This framework will have several implications for the engineering field including changes to the current design-construction process and education of engineers. The framework is a base for continued research on how to implement design techniques into the engineering industry to enhance the sustainability of constructed systems.
- 1 April 2014
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 17 (4) , 461-470
A Framework for the Integration of Performance Based Design and Life Cycle Assessment to Design Sustainable Structures
Sustainability is an issue that has become of key importance to the engineering industry. An important definition for sustainability is True Sustainability: a concept often termed the Triple Bottom Line Approach, which involves the balance of Economic, Social and Environmental sustainability. At present the focus on sustainable design within the engineering profession is on Environmental Sustainability and Green Design. This focus is too narrow with engineering systems not considering the other components of sustainability emphasizing the need for sustainable design to have a broader scope. This paper presents a framework attempting to overcome this narrow focus through the integration of two separate engineering design techniques, Performance Based Design and Life Cycle Assessment. The framework is a 6-step process that combines these two techniques through establishment of common goals. This integration presents a logical methodology that may be adopted by engineering professionals to design engineering systems to achieve True Sustainability. This framework will have several implications for the engineering field including changes to the current design-construction process and education of engineers. The framework is a base for continued research on how to implement design techniques into the engineering industry to enhance the sustainability of constructed systems.
- 11 May 2013
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 36 (10) , 1027-1038
Fatigue tests on steel plates with longitudinal weld attachment strengthened by ultra high modulus carbon fibre reinforced polymer plate
Welded steel connections of infrastructures are susceptible to fatigue failure. Advanced carbon fibre reinforced polymer (CFRP) has been demonstrated promising for fatigue strengthening of steel structures. Limited research was conducted on CFRP strengthening of welded connections. This paper focuses on the application of ultra high modulus (UHM) CFRP plates with a modulus of 460 GPa to strengthen steel plates with longitudinal fillet weld attachment using five CFRP strengthening configurations. A series of fatigue tension tests were carried out with constant amplitude fatigue loading. Beach marking technique was adopted to record the crack propagation process. Effects of CFRP bond length, bond width and bond locations on fatigue performance of welded steel joints were investigated. The experimental results showed that UHM CFRP plates could generally increase the fatigue life of the welded steel joints. It seems better to apply CFRP on the welding side of the specimen to achieve longer fatigue life. Then, the effects of weld and weld attachment on the CFRP strengthening efficiency was further studied by comparing experimental results of non‐welded steel plates with single side UHM CFRP plate strengthening. Finally, the classification method was adopted to assess the strengthening efficiency of the UHM CFRP plate to the steel plates with longitudinal weld attachment.
- 11 May 2013
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 36 (10) , 1027-1038
Fatigue tests on steel plates with longitudinal weld attachment strengthened by ultra high modulus carbon fibre reinforced polymer plate
Welded steel connections of infrastructures are susceptible to fatigue failure. Advanced carbon fibre reinforced polymer (CFRP) has been demonstrated promising for fatigue strengthening of steel structures. Limited research was conducted on CFRP strengthening of welded connections. This paper focuses on the application of ultra high modulus (UHM) CFRP plates with a modulus of 460 GPa to strengthen steel plates with longitudinal fillet weld attachment using five CFRP strengthening configurations. A series of fatigue tension tests were carried out with constant amplitude fatigue loading. Beach marking technique was adopted to record the crack propagation process. Effects of CFRP bond length, bond width and bond locations on fatigue performance of welded steel joints were investigated. The experimental results showed that UHM CFRP plates could generally increase the fatigue life of the welded steel joints. It seems better to apply CFRP on the welding side of the specimen to achieve longer fatigue life. Then, the effects of weld and weld attachment on the CFRP strengthening efficiency was further studied by comparing experimental results of non‐welded steel plates with single side UHM CFRP plate strengthening. Finally, the classification method was adopted to assess the strengthening efficiency of the UHM CFRP plate to the steel plates with longitudinal weld attachment.
- 1 October 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (10) , 1817-1828
Fatigue Behaviour of Welded Steel Connections under Combined Actions
This paper describes experimental and numerical studies on the fatigue behavior of steel connections under combined loads, including a cyclic load and a static load. The steel connections consist of two steel plates joined together by single-sided girth welds. They were tested to failure under a constant amplitude tensile cyclic load combined with varied tensile static loads, which are perpendicular to the cyclic load. The experimental results reveal that the presence of the tensile static load in the perpendicular direction to the cyclic load is able to reduce the fatigue crack propagation rate and hence extend the fatigue life. Modeling of the steel connections is described in this paper to determine the effect of the magnitude of tensile static load on fatigue propagation life. The Boundary Element Analysis System Software (BEASY) is used. The analyses of these tested specimens are compared with their experimental results. It is proved that the boundary element method through the BEASY software is able to provide a close estimation of the cyclic behavior of steel connections.
- 1 October 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (10) , 1817-1828
Fatigue Behaviour of Welded Steel Connections under Combined Actions
This paper describes experimental and numerical studies on the fatigue behavior of steel connections under combined loads, including a cyclic load and a static load. The steel connections consist of two steel plates joined together by single-sided girth welds. They were tested to failure under a constant amplitude tensile cyclic load combined with varied tensile static loads, which are perpendicular to the cyclic load. The experimental results reveal that the presence of the tensile static load in the perpendicular direction to the cyclic load is able to reduce the fatigue crack propagation rate and hence extend the fatigue life. Modeling of the steel connections is described in this paper to determine the effect of the magnitude of tensile static load on fatigue propagation life. The Boundary Element Analysis System Software (BEASY) is used. The analyses of these tested specimens are compared with their experimental results. It is proved that the boundary element method through the BEASY software is able to provide a close estimation of the cyclic behavior of steel connections.
- 1 October 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (10) , 1801-1815
Fatigue Tests of Cracked Steel Plates Strengthened with UHM CFRP Plates
Carbon fibre reinforced polymer ( CFRP) has shown promise for improving the fatigue performance of steel structures. Previous studies have indicated that increasing the Young's modulus of CFRP can be beneficial for decreasing the stress intensity factor at the fatigue crack tip. In this project, ultra high modulus (UHM) CFRP plates with Young's modulus of 460 GPa were adopted to study their fatigue repair effectiveness. A series of fatigue tension tests was carried out on steel plates with an initial crack in the centre. Five strengthening configurations were used and a constant amplitude fatigue loading was applied to all the specimens. The beach marking technique was utilized to record the fatigue crack propagation. The effects of CFRP bond length, bond width and bond locations on the fatigue performance of cracked steel plates were also studied. The experimental results show that UHM CFRP plates can greatly increase the fatigue life of cracked steel plates by a factor ranging from 3.26 to 7.47. When CFRP plates cover the whole crack surface, the fatigue crack of the steel plate is arrested. The strengthening effectiveness of UHM CFRP plates is also compared with those using high Young's modulus CFRP sheeting and normal Young's modulus CFRP plates with or without prestressing.
- 1 October 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (10) , 1801-1815
Fatigue Tests of Cracked Steel Plates Strengthened with UHM CFRP Plates
Carbon fibre reinforced polymer ( CFRP) has shown promise for improving the fatigue performance of steel structures. Previous studies have indicated that increasing the Young's modulus of CFRP can be beneficial for decreasing the stress intensity factor at the fatigue crack tip. In this project, ultra high modulus (UHM) CFRP plates with Young's modulus of 460 GPa were adopted to study their fatigue repair effectiveness. A series of fatigue tension tests was carried out on steel plates with an initial crack in the centre. Five strengthening configurations were used and a constant amplitude fatigue loading was applied to all the specimens. The beach marking technique was utilized to record the fatigue crack propagation. The effects of CFRP bond length, bond width and bond locations on the fatigue performance of cracked steel plates were also studied. The experimental results show that UHM CFRP plates can greatly increase the fatigue life of cracked steel plates by a factor ranging from 3.26 to 7.47. When CFRP plates cover the whole crack surface, the fatigue crack of the steel plate is arrested. The strengthening effectiveness of UHM CFRP plates is also compared with those using high Young's modulus CFRP sheeting and normal Young's modulus CFRP plates with or without prestressing.