Tao Wan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tao Wan has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
Songsong He
10 shared publicationsDongmei Li
College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu, China
9 shared publicationsQi Tang
College of Materials and Chemistry and Chemical Engineering, Chengdu University of Technology, Chengdu, China
8 shared publicationsHao Xu
College of Materials and Chemistry&Chemical Engineering Chengdu University of Technology Chengdu China
7 shared publicationsMingrui Yu
7 shared publicationsRunqiu Huang
State Key Lab of Geohazard Prevention & Geoenvironment Protection, Chengdu University of Technology, Chengdu, China
7 shared publications
Latest Publications
- 11 November 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (12) , 322
Bi2MoO6/Modified Basalt Fiber Photocatalyst for Visible-Light Photocatalytic Degradation of Tetracycline
- 11 November 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (12) , 322
Bi2MoO6/Modified Basalt Fiber Photocatalyst for Visible-Light Photocatalytic Degradation of Tetracycline
- 21 October 2026
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (12) , 688
Adsorption and slow release of fertilizer by phytic acid-modified corn stalk composite superabsorbents
- 21 October 2026
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (12) , 688
Adsorption and slow release of fertilizer by phytic acid-modified corn stalk composite superabsorbents
- 13 October 2025
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (12) , 1544-1558
Synthesis and lithium adsorption behavior of nanostructured lithium manganese oxide ion sieve by two‐step hydrothermal oxidation
Li + adsorption from brine water by lithium manganese oxide ion sieve (LMO) has become one of the most promising methods due to the high efficiency and selectivity towards lithium ion. However, the dissolution loss of Mn affects its structural stability and thus seriously limits its practical application. In this study, a novel approach of two‐step hydrothermal oxidation technique where H 2 O 2 and NaClO as the oxidants for the first step and the second step oxidation, respectively, is developed to fabricate nanostructured LMO (N‐LMO) with particle size of 20–45 nm. Influences of synthesis conditions in the first‐step H 2 O 2 oxidation and the second‐step NaClO oxidation on the lithium adsorption of N‐HMO prepared by N‐LMO acid leaching were investigated. Selectivity behavior towards lithium ion of N‐HMO was also studied. FTIR, FESEM, XPS, and XRD were used to characterize the structure and morphology of N‐LMO. Porous and nanostructures produced by two‐step hydrothermal oxidation increase the exposure of adsorption sites, which significantly accelerates the deintercalation and intercalation of Li + from vacancies in the framework. N‐HMO has high Li + adsorption capacity of 31.5 mg/g. Adsorption capacity for Li + remains at 85.7% after 5 recycles, indicating stable structure and good cycling performance of N‐HMO in the process of adsorption–desorption, due to the fact that the second‐step NaClO oxidation can transform some Mn 3+ into Mn 4+ . The distribution coefficient (K d ) of Li + (874.21) is significantly higher than those of other competing metal ions (Na + : 23.17, K + : 22.51, Ca 2+ : 30.89, Mg 2+ : 70.22). Moreover, the concentration factor C F of Li + (608.3) is much higher than that of other metal ions, indicating that lithium adsorption is hardly interfered by other competitive metal ions, and thus lithium is recovered from brine with high selectivity. This research develops an efficient and novel strategy for the synthesis of nanostructured LMO with simple and mild conditions via a two‐step hydrothermal oxidation method, eliminating the requirement for complicated, time‐consuming and high‐energy consumption for conventional calcination method, and the prepared N‐HMO has great potential application in recovering lithium ion from brine sources due to its high structural stability and high selectivity towards lithium ion.
- 13 October 2025
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (12) , 1544-1558
Synthesis and lithium adsorption behavior of nanostructured lithium manganese oxide ion sieve by two‐step hydrothermal oxidation
Li + adsorption from brine water by lithium manganese oxide ion sieve (LMO) has become one of the most promising methods due to the high efficiency and selectivity towards lithium ion. However, the dissolution loss of Mn affects its structural stability and thus seriously limits its practical application. In this study, a novel approach of two‐step hydrothermal oxidation technique where H 2 O 2 and NaClO as the oxidants for the first step and the second step oxidation, respectively, is developed to fabricate nanostructured LMO (N‐LMO) with particle size of 20–45 nm. Influences of synthesis conditions in the first‐step H 2 O 2 oxidation and the second‐step NaClO oxidation on the lithium adsorption of N‐HMO prepared by N‐LMO acid leaching were investigated. Selectivity behavior towards lithium ion of N‐HMO was also studied. FTIR, FESEM, XPS, and XRD were used to characterize the structure and morphology of N‐LMO. Porous and nanostructures produced by two‐step hydrothermal oxidation increase the exposure of adsorption sites, which significantly accelerates the deintercalation and intercalation of Li + from vacancies in the framework. N‐HMO has high Li + adsorption capacity of 31.5 mg/g. Adsorption capacity for Li + remains at 85.7% after 5 recycles, indicating stable structure and good cycling performance of N‐HMO in the process of adsorption–desorption, due to the fact that the second‐step NaClO oxidation can transform some Mn 3+ into Mn 4+ . The distribution coefficient (K d ) of Li + (874.21) is significantly higher than those of other competing metal ions (Na + : 23.17, K + : 22.51, Ca 2+ : 30.89, Mg 2+ : 70.22). Moreover, the concentration factor C F of Li + (608.3) is much higher than that of other metal ions, indicating that lithium adsorption is hardly interfered by other competitive metal ions, and thus lithium is recovered from brine with high selectivity. This research develops an efficient and novel strategy for the synthesis of nanostructured LMO with simple and mild conditions via a two‐step hydrothermal oxidation method, eliminating the requirement for complicated, time‐consuming and high‐energy consumption for conventional calcination method, and the prepared N‐HMO has great potential application in recovering lithium ion from brine sources due to its high structural stability and high selectivity towards lithium ion.
- 15 August 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 320
In-situ synthesis of Fe-MOF with high visible light photocatalytic activity through defect engineering
- 15 August 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 320
In-situ synthesis of Fe-MOF with high visible light photocatalytic activity through defect engineering
- 28 March 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (10) , 4923-4940
Preparation and methylene blue dye adsorption behavior of MIL-100 (Fe) by hydrothermal method
- 28 March 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (10) , 4923-4940
Preparation and methylene blue dye adsorption behavior of MIL-100 (Fe) by hydrothermal method
- 25 November 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (1) , 51-64
Adsorption‐photocatalysis for methylene blue dye removal by novel Fe‐MOFs through defect engineering
In recent years, metal–organic frameworks (MOFs) have attracted much attention in environmental pollution control. However, most MOFs still have problems such as low utilization of visible light and easy recombination of photogenerated electrons and holes. In this study, novel defective Fe‐MOFs with appropriate structural defects were prepared by solvothermal method and used to remove methylene blue (MB) in aqueous phase through adsorption and photocatalysis. Defective Fe‐MOFs have Fe content as high as 10.31% with specific surface area of 40.95 m2/g, which is beneficial for both dye adsorption and photocatalytic process. Defective Fe‐MOFs have spindle‐like structures with sizes ranging from 40 nm to 100 nm and an average size of 69.1 nm, as well as some irregularly shaped nanoparticles. Irregular stacking of these two kinds of structure makes Fe‐MOFs appropriate structural defects, large specific surface area, and mesoporous structure. Kinetics and isotherms of dye adsorption process are consistent with pseudo‐first‐order kinetic model and Freundlich isotherm model, respectively. Defective Fe‐MOFs can absorb MB dye rapidly, reaching adsorption equilibrium within 60 min. Dye adsorption process is endothermic, spontaneous, and entropy‐increasing process. After 180 min visible light illumination, dye photocatalytic efficiency of the defective Fe‐MOFs reaches 97.56% in the condition of MB concentration as high as 30 mg/L. Consequently, defective Fe‐MOFs with appropriate structural defects, porous structure, high Fe‐O content, and strong electron‐donating amino groups have huge potential applications in removing organic dyes from the aqueous solution by a green and environmentally friendly way due to their high dye adsorption and dye photocatalytic activity.
- 25 November 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (1) , 51-64
Adsorption‐photocatalysis for methylene blue dye removal by novel Fe‐MOFs through defect engineering
In recent years, metal–organic frameworks (MOFs) have attracted much attention in environmental pollution control. However, most MOFs still have problems such as low utilization of visible light and easy recombination of photogenerated electrons and holes. In this study, novel defective Fe‐MOFs with appropriate structural defects were prepared by solvothermal method and used to remove methylene blue (MB) in aqueous phase through adsorption and photocatalysis. Defective Fe‐MOFs have Fe content as high as 10.31% with specific surface area of 40.95 m2/g, which is beneficial for both dye adsorption and photocatalytic process. Defective Fe‐MOFs have spindle‐like structures with sizes ranging from 40 nm to 100 nm and an average size of 69.1 nm, as well as some irregularly shaped nanoparticles. Irregular stacking of these two kinds of structure makes Fe‐MOFs appropriate structural defects, large specific surface area, and mesoporous structure. Kinetics and isotherms of dye adsorption process are consistent with pseudo‐first‐order kinetic model and Freundlich isotherm model, respectively. Defective Fe‐MOFs can absorb MB dye rapidly, reaching adsorption equilibrium within 60 min. Dye adsorption process is endothermic, spontaneous, and entropy‐increasing process. After 180 min visible light illumination, dye photocatalytic efficiency of the defective Fe‐MOFs reaches 97.56% in the condition of MB concentration as high as 30 mg/L. Consequently, defective Fe‐MOFs with appropriate structural defects, porous structure, high Fe‐O content, and strong electron‐donating amino groups have huge potential applications in removing organic dyes from the aqueous solution by a green and environmentally friendly way due to their high dye adsorption and dye photocatalytic activity.
- 25 November 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (1) , 37-50
Synthesis and visible light photocatalytic activity of magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalysts
Metal–organic framework (MOF) has attracted extensive attention in photocatalytic organic pollutants. However, most MOFs still have problems such as low response of visible light, easy recombination of electrons and holes, and complicated separation and recovery process. In this study, a facile approach was proposed to construct magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalyst via solvothermal method. NiFe2O4 nanoparticles with octahedral structure are closely attached onto the surface of tubular such as NH2‐MIL‐53(Fe). NH2‐MIL‐53(Fe)/NiFe2O4 has soft ferromagnetism, good paramagnetism, and magnetic response. After 210 min visible light illumination, photocatalytic efficiency of NH2‐MIL‐53(Fe)/NiFe2O4 reaches 95.71% in the condition of methylene blue (MB) concentration as high as 30 mg/L, which is much higher than that (50.11%) of NH2‐MIL‐53(Fe). After five runs, photocatalytic activity of NH2‐MIL‐53(Fe)/NiFe2O4 only decreases to 90.41%. Consequently, magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalyst has huge potential applications in removing organic dyes by a green and environmentally friendly way due to its high photocatalytic activity, high stability, and easy solid–liquid separation.
- 25 November 2024
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 72 (1) , 37-50
Synthesis and visible light photocatalytic activity of magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalysts
Metal–organic framework (MOF) has attracted extensive attention in photocatalytic organic pollutants. However, most MOFs still have problems such as low response of visible light, easy recombination of electrons and holes, and complicated separation and recovery process. In this study, a facile approach was proposed to construct magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalyst via solvothermal method. NiFe2O4 nanoparticles with octahedral structure are closely attached onto the surface of tubular such as NH2‐MIL‐53(Fe). NH2‐MIL‐53(Fe)/NiFe2O4 has soft ferromagnetism, good paramagnetism, and magnetic response. After 210 min visible light illumination, photocatalytic efficiency of NH2‐MIL‐53(Fe)/NiFe2O4 reaches 95.71% in the condition of methylene blue (MB) concentration as high as 30 mg/L, which is much higher than that (50.11%) of NH2‐MIL‐53(Fe). After five runs, photocatalytic activity of NH2‐MIL‐53(Fe)/NiFe2O4 only decreases to 90.41%. Consequently, magnetic NH2‐MIL‐53(Fe)/NiFe2O4 photocatalyst has huge potential applications in removing organic dyes by a green and environmentally friendly way due to its high photocatalytic activity, high stability, and easy solid–liquid separation.
- 14 May 2024
- Published by Springer Nature in Journal of Polymer Research
- Vol. 31 (5) , 1-11
Synthesis, swelling and water-retention behaviors of phytic acid-modified corn stalk-composite superabsorbents
- 14 May 2024
- Published by Springer Nature in Journal of Polymer Research
- Vol. 31 (5) , 1-11
Synthesis, swelling and water-retention behaviors of phytic acid-modified corn stalk-composite superabsorbents
- Open Access
- 14 September 2023
- Published by Springer Nature in Research Square
Synthesis, swelling and water-retention behaviors of phytic acid-modified corn stalk-composite superabsorbents
A novel phytic acid-modified corn stalk-composite superabsorbent (PACS-g-p(AA-AM-VP)) with water absorbency of 391g/g, water retention around 30% at 200min under 90°C, adsorption capacities of 284mg/g and 448 mg/g for Ni(II) and Cu (II), respectively, was synthesized by graft copolymerization of acrylamide(AM), vinyl pyrrolidone(VP) and itaconic acid(IA) with phytic acid-modified corn stalk (PACS) in aqueous solution, using N,N-methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate(APS) and sodium bisulfite(SBS) as redox initiator. Factors influencing water absorbency and water retention of PACS-g-p(AA-AM-VP), such as PACS amount, initiator amount, crosslinker amount, neutralization degree of IA, IA/VP mass ratio and IA/AM mass ratio, were investigated. Morphologies and structure of PACS-g-p(AA-AM-VP) were characterized by FTIR and SEM. FTIR spectra indicate the structure of phytic acid-modified corn stalk graft-copolymer. SEM data shows that fiber structure of corn stalk is partially destroyed after phytic acid modification under ultrasonic wave. PACS-g-p(AA-AM-VP) has a coarse, fluffy and porous structure, facilitating the permeation of water and heavy metal ions into the polymeric network. Given these properties, PACS-g-p(AA-AM-VP) can be extensively applied in agriculture and horticulture as a water-retaining and soil remediation material which increases agricultural irrigation efficiency and remediates heavy metal-contaminated soil due to its low cost, environmental friendliness, high water retention and good adsorption for heavy metal ions.
- 14 September 2023
- Published by Springer Nature in Research Square
Open AccessSynthesis, swelling and water-retention behaviors of phytic acid-modified corn stalk-composite superabsorbents
A novel phytic acid-modified corn stalk-composite superabsorbent (PACS-g-p(AA-AM-VP)) with water absorbency of 391g/g, water retention around 30% at 200min under 90°C, adsorption capacities of 284mg/g and 448 mg/g for Ni(II) and Cu (II), respectively, was synthesized by graft copolymerization of acrylamide(AM), vinyl pyrrolidone(VP) and itaconic acid(IA) with phytic acid-modified corn stalk (PACS) in aqueous solution, using N,N-methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate(APS) and sodium bisulfite(SBS) as redox initiator. Factors influencing water absorbency and water retention of PACS-g-p(AA-AM-VP), such as PACS amount, initiator amount, crosslinker amount, neutralization degree of IA, IA/VP mass ratio and IA/AM mass ratio, were investigated. Morphologies and structure of PACS-g-p(AA-AM-VP) were characterized by FTIR and SEM. FTIR spectra indicate the structure of phytic acid-modified corn stalk graft-copolymer. SEM data shows that fiber structure of corn stalk is partially destroyed after phytic acid modification under ultrasonic wave. PACS-g-p(AA-AM-VP) has a coarse, fluffy and porous structure, facilitating the permeation of water and heavy metal ions into the polymeric network. Given these properties, PACS-g-p(AA-AM-VP) can be extensively applied in agriculture and horticulture as a water-retaining and soil remediation material which increases agricultural irrigation efficiency and remediates heavy metal-contaminated soil due to its low cost, environmental friendliness, high water retention and good adsorption for heavy metal ions.