Jincheng Ding
Jincheng Ding has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Shaoxuan Ding
Faculty of Science, University of Melbourne, Parkville, Victoria, 3010, Australia
6 shared publicationsEnmin Lv
College of Chemistry and Chemical Engineering, Shandong University of Technology, 266 Xincun West Road, Zibo, Shandong 255000, People’s Republic of China
5 shared publicationsJie Lu
Department of Resources and Environmental Engineering
4 shared publications- Jie Lu
School of Chemistry and Chemical Engineering, Shandong University of Technology, Zibo 255000, China
4 shared publications - Jie Lu
Department of Resources and Environmental Engineering, Shandong University of Technology, Zibo, 255000, China
3 shared publications Zhuang Li
3 shared publications
Latest Publications
- 6 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (41) , 19551-19573
A Review on Graphene-Based Catalysts for Biodiesel Production
- 6 October 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (41) , 19551-19573
A Review on Graphene-Based Catalysts for Biodiesel Production
- 17 August 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 321, 115942
The degradation of dissolved organic matter in black and odorous water by humic substance-mediated Fe(II)/Fe(III) cycle under redox fluctuation
- 17 August 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 321, 115942
The degradation of dissolved organic matter in black and odorous water by humic substance-mediated Fe(II)/Fe(III) cycle under redox fluctuation
- Open Access
Water Environmental Functional Zoning at County Level and Environmental Contamination Carrying Capacity Accounting in the Mainstream of Xiaofu River
Water environmental functional zoning is the crucial method to implement the targeted management of environmental factors, which is significant to protect the structure and function of the water ecosystem. Xiaofu River is the main river in Zibo City, which is a typical industrial city in northern China. This paper analyzes the water functional zoning of the Xiaofu River at the provincial and municipal levels. Thereinto, based on the catchment attribute and differentiated management requirement, the functional zone of the mainstream of Xiaofu River is divided into 5 first-level and 14 s-level water functional zones, where the environmental contamination carrying capacity of every functional zone is calculated and checked. It is suggested that the total amount of pollutants discharged into each functional zones should be further controlled and reduced in the future to restore the ecological functions of Xiaofu River.
Open AccessWater Environmental Functional Zoning at County Level and Environmental Contamination Carrying Capacity Accounting in the Mainstream of Xiaofu River
Water environmental functional zoning is the crucial method to implement the targeted management of environmental factors, which is significant to protect the structure and function of the water ecosystem. Xiaofu River is the main river in Zibo City, which is a typical industrial city in northern China. This paper analyzes the water functional zoning of the Xiaofu River at the provincial and municipal levels. Thereinto, based on the catchment attribute and differentiated management requirement, the functional zone of the mainstream of Xiaofu River is divided into 5 first-level and 14 s-level water functional zones, where the environmental contamination carrying capacity of every functional zone is calculated and checked. It is suggested that the total amount of pollutants discharged into each functional zones should be further controlled and reduced in the future to restore the ecological functions of Xiaofu River.
- 1 February 2022
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (12) , 2347-2359
Photo-fenton degradation of RhB via transition metal oxides composite catalyst Fe3O4/CuO under visible light optimized using response surface methodology
This paper reports on the facile synthesis and degradation of a heterogeneous photo-Fenton catalyst Fe3O4/CuO to improve the conventional photo-Fenton catalyst. The results using Fe3O4/CuO as a heterogeneous photo-Fenton catalyst showed that the degradation of 98.9% was achieved through visible light irradiation of 10 mg·L−1 RhB solution at pH 2 in the presence of 30 mmol·L−1 H2O2 for 1 h. In addition, the process parameters were optimised using the Response Surface Methodology (RSM). After optimisation, optimum conditions of process factors such as catalyst dosage, initial concentration of H2O2, pH and initial concentration of RhB were determined as 17 mg·L−1, 28.14 mmol·L−1,2.32 and 5.31 mg·L−1, respectively. The quenching experiments of active species demonstrated that hydroxyl radical (·OH) was the main active group. Cycling experiments proved that the catalyst has good reusability. Finally, the possible reaction pathways of the photo-Fenton catalyst under the conditions of visible light and hydrogen peroxide were proposed.
- 1 February 2022
- Published by Taylor & Francis in Materials Technology
- Vol. 37 (12) , 2347-2359
Photo-fenton degradation of RhB via transition metal oxides composite catalyst Fe3O4/CuO under visible light optimized using response surface methodology
This paper reports on the facile synthesis and degradation of a heterogeneous photo-Fenton catalyst Fe3O4/CuO to improve the conventional photo-Fenton catalyst. The results using Fe3O4/CuO as a heterogeneous photo-Fenton catalyst showed that the degradation of 98.9% was achieved through visible light irradiation of 10 mg·L−1 RhB solution at pH 2 in the presence of 30 mmol·L−1 H2O2 for 1 h. In addition, the process parameters were optimised using the Response Surface Methodology (RSM). After optimisation, optimum conditions of process factors such as catalyst dosage, initial concentration of H2O2, pH and initial concentration of RhB were determined as 17 mg·L−1, 28.14 mmol·L−1,2.32 and 5.31 mg·L−1, respectively. The quenching experiments of active species demonstrated that hydroxyl radical (·OH) was the main active group. Cycling experiments proved that the catalyst has good reusability. Finally, the possible reaction pathways of the photo-Fenton catalyst under the conditions of visible light and hydrogen peroxide were proposed.
- 4 December 2020
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 34 (12) , 15614-15633
Mini Review of Biodiesel by Integrated Membrane Separation Technologies That Enhanced Esterification/Transesterification
- 4 December 2020
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 34 (12) , 15614-15633
Mini Review of Biodiesel by Integrated Membrane Separation Technologies That Enhanced Esterification/Transesterification
- 31 August 2020
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 18 (9)
Separation and purification of fatty acids by membrane technology: a critical review
Fatty acids (FAs) are a very important group of raw materials for chemical industry, and the technology of separating or purifying the FAs from the reaction product mixture has always been the hotspot of research. Membrane processes for separation of FAs are being increasingly reported. Compared with conventional FAs separation methods, membrane separation has the advantages of low energy consumption, system compactness, high separation efficiency, easy scale-up, high available surface area per unit volume and low working temperatures, thereby attracting considerable attention of many researchers. In this regards, this paper critically reviewed the developments of methods for FAs separation and purification, and the future prospects of coupling membrane technology with hydrolysis for enhanced production of FAs.
- 31 August 2020
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 18 (9)
Separation and purification of fatty acids by membrane technology: a critical review
Fatty acids (FAs) are a very important group of raw materials for chemical industry, and the technology of separating or purifying the FAs from the reaction product mixture has always been the hotspot of research. Membrane processes for separation of FAs are being increasingly reported. Compared with conventional FAs separation methods, membrane separation has the advantages of low energy consumption, system compactness, high separation efficiency, easy scale-up, high available surface area per unit volume and low working temperatures, thereby attracting considerable attention of many researchers. In this regards, this paper critically reviewed the developments of methods for FAs separation and purification, and the future prospects of coupling membrane technology with hydrolysis for enhanced production of FAs.
- 24 April 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (17) , 17472-17481
Comparing the performance of various nanofiltration membranes in advanced oxidation-nanofiltration treatment of reverse osmosis concentrates
Reverse osmosis (RO) technique plays an important role in the treatment of secondary biochemical effluent. However, the reverse osmosis concentrate (ROC) with high salinity and organic pollutants generated from this process remains a challenge to be tackled. The O3-assisted UV-Fenton advanced oxidation process (AOP) as a pretreatment for the nanofiltration (NF) was used to treat the ROC of industrial wastewater. The optimal removal rates of COD and UV254 were 80.4 and 77.4%, respectively. In the NF process, four types of commercial NF membranes (NF90 (Dow, USA), DK (GE, USA), NT101, and NT103 (NADIR, Germany)) were used to treat the AOP effluent. The effects of operating pressure and feed temperature on ion rejection were investigated. The results show that NF90 and NT103 membranes had better rejections to monovalent ions, while DK and NT101 membranes could effectively separate monovalent and divalent ions and their ion rejections decreased with the increase of feed temperature. With the NF90 membrane, the highest TDS removal rate of 89.65% was obtained at the operating pressure of 1.2 MPa.
- 24 April 2019
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 26 (17) , 17472-17481
Comparing the performance of various nanofiltration membranes in advanced oxidation-nanofiltration treatment of reverse osmosis concentrates
Reverse osmosis (RO) technique plays an important role in the treatment of secondary biochemical effluent. However, the reverse osmosis concentrate (ROC) with high salinity and organic pollutants generated from this process remains a challenge to be tackled. The O3-assisted UV-Fenton advanced oxidation process (AOP) as a pretreatment for the nanofiltration (NF) was used to treat the ROC of industrial wastewater. The optimal removal rates of COD and UV254 were 80.4 and 77.4%, respectively. In the NF process, four types of commercial NF membranes (NF90 (Dow, USA), DK (GE, USA), NT101, and NT103 (NADIR, Germany)) were used to treat the AOP effluent. The effects of operating pressure and feed temperature on ion rejection were investigated. The results show that NF90 and NT103 membranes had better rejections to monovalent ions, while DK and NT101 membranes could effectively separate monovalent and divalent ions and their ion rejections decreased with the increase of feed temperature. With the NF90 membrane, the highest TDS removal rate of 89.65% was obtained at the operating pressure of 1.2 MPa.
- 4 April 2019
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 17 (8)
Response Surface Methodology Optimization and Kinetic Study of Ultrafiltration-Enhanced, SCER-catalyzed Hydrolysis of Lard
The integration process of polyethersulphone (PES) ultrafiltration with catalytic hydrolysis of lard was optimized by response surface methodology (RSM). The influences of molar ratio of water to lard, reaction time and transmembrane pressure on the fatty acids (FAs) yield were investigated. Results showed that the maximum FAs yield of 99.52 % was obtained under the optimized conditions of molar ratio of water to lard of 6.0:1.0, reaction time of 10.0 h and transmembrane pressure of 100.0 kPa. Moreover, the membrane cleaning efficiency was studied after four cleanings. Furthermore, the kinetic model of membrane separation process was investigated and the activation energy and pre-exponential factor were determined.
- 4 April 2019
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 17 (8)
Response Surface Methodology Optimization and Kinetic Study of Ultrafiltration-Enhanced, SCER-catalyzed Hydrolysis of Lard
The integration process of polyethersulphone (PES) ultrafiltration with catalytic hydrolysis of lard was optimized by response surface methodology (RSM). The influences of molar ratio of water to lard, reaction time and transmembrane pressure on the fatty acids (FAs) yield were investigated. Results showed that the maximum FAs yield of 99.52 % was obtained under the optimized conditions of molar ratio of water to lard of 6.0:1.0, reaction time of 10.0 h and transmembrane pressure of 100.0 kPa. Moreover, the membrane cleaning efficiency was studied after four cleanings. Furthermore, the kinetic model of membrane separation process was investigated and the activation energy and pre-exponential factor were determined.
- 1 March 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 96 (9) , 2014-2024
An integrated process of catalytic hydrolysis and membrane separation for fatty acids production from lard oil
An integrated process of catalytic hydrolysis and membrane separation was developed for fatty acids (FAs) production from lard oil. Both sulphonated cation exchange resin (SCER) and 0.98 g/g H2SO4 as catalysts were used to produce fatty acids (FAs) from lard oil by three‐step hydrolysis, respectively. Simultaneously, polyethersulphone (PES) ultrafiltration membrane was employed to separate glycerol and water from the products. The hydrophilicity and morphology of the pristine and used PES membranes were characterized by contact angle measurement and field‐emission scanning electronic microscopy, respectively. The final optimal yields of FAs obtained by SCER and H2SO4 catalysis at 100 °C and atmospheric pressure were 85.6 % at 16.0 h of operation and 94.5 % at 18.0 h of operation, respectively. Furthermore, the yield of FAs obtained from an integrated process of SCER‐catalyzed hydrolysis and membrane separation achieved up to 99.9 % at 10.0 h, 90 °C, and operating pressure of 100 kPa.
- 1 March 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 96 (9) , 2014-2024
An integrated process of catalytic hydrolysis and membrane separation for fatty acids production from lard oil
An integrated process of catalytic hydrolysis and membrane separation was developed for fatty acids (FAs) production from lard oil. Both sulphonated cation exchange resin (SCER) and 0.98 g/g H2SO4 as catalysts were used to produce fatty acids (FAs) from lard oil by three‐step hydrolysis, respectively. Simultaneously, polyethersulphone (PES) ultrafiltration membrane was employed to separate glycerol and water from the products. The hydrophilicity and morphology of the pristine and used PES membranes were characterized by contact angle measurement and field‐emission scanning electronic microscopy, respectively. The final optimal yields of FAs obtained by SCER and H2SO4 catalysis at 100 °C and atmospheric pressure were 85.6 % at 16.0 h of operation and 94.5 % at 18.0 h of operation, respectively. Furthermore, the yield of FAs obtained from an integrated process of SCER‐catalyzed hydrolysis and membrane separation achieved up to 99.9 % at 10.0 h, 90 °C, and operating pressure of 100 kPa.