IWIrena Wojnowska-Baryła

Irena Wojnowska-Baryła

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Irena Wojnowska-Baryła has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Growing Problem of Textile Waste Generation—The Current State of Textile Waste Management

    by Irena Wojnowska-Baryła, Katarzyna Bernat, Magdalena Zaborowska, Dorota Kulikowska

    The textile industry is global, and most brands export their products to many different markets with different infrastructures, logistics, and regulations. A textile waste recovery system that works in one country may fail in another. European Union legislation (Directive (EU) 2018/851) mandates that post-consumer textile waste must be separately collected in all associated countries. This directive has also stated that, in January 2025, the rate of textile waste recycling in Europe should be increased. Local governments will be under pressure to improve the collection, sorting, and recycling of textiles. Supporting local governments could be part of a more long-term approach to managing high-value textile waste by implementing Extended Producer Responsibility, which would increase the recycling rate of textile companies. This would enable reuse of over 60% of recovered clothes, recycling into fibers of 35%, and only throwing away 5%. Today, most textile waste (85%) is disposed of as solid waste and must be disposed of through municipal or local waste management systems that either landfill or incinerate the waste. To increase reuse and recycling efficiency, textile waste should be collected and sorted according to the relevant input requirements. The dominant form of textile waste sorting is manual sorting. Sorting centers could be a future solution for intensifying the recycling of textile waste. Advances in textile waste management will require digitization processes, which will facilitate the collection, sorting, and recycling of textiles. It is very important that digitization will help to guide used products to recycling and encourage manufacturers to participate in the use and collection of product data. Currently, both the digitization of textile waste management and fiber recycling technologies are at the level of laboratory research and have not been implemented. The aim of this publication is to analyze the state of textile waste management, especially the various forms of recycling that involve a local governments and the textile industry.


  • Top Cited Papers
    Open Access

    Plastic Waste Degradation in Landfill Conditions: The Problem with Microplastics, and Their Direct and Indirect Environmental Effects

    by Irena Wojnowska-Baryła, Katarzyna Bernat, Magdalena Zaborowska

    As landfilling is a common method for utilizing plastic waste at its end-of-life, it is important to present knowledge about the environmental and technical complications encountered during plastic disposal, and the formation and spread of microplastics (MPs) from landfills, to better understand the direct and indirect effects of MPs on pollution. Plastic waste around active and former landfills remains a source of MPs. The landfill output consists of leachate and gases created by combined biological, chemical, and physical processes. Thus, small particles and/or fibers, including MPs, are transported to the surroundings by air and by leachate. In this study, a special focus was given to the potential for the migration and release of toxic substances as the aging of plastic debris leads to the release of harmful volatile organic compounds via oxidative photodegradation. MPs are generally seen as the key vehicles and accumulators of non-biodegradable pollutants. Because of their small size, MPs are quickly transported over long distances throughout their surroundings. With large specific surface areas, they have the ability to absorb pollutants, and plastic monomers and additives can be leached out of MPs; thus, they can act as both vectors and carriers of pollutants in the environment.


  • Open Access

    Strategies of Recovery and Organic Recycling Used in Textile Waste Management

    by Irena Wojnowska-Baryła, Katarzyna Bernat, Magdalena Zaborowska

    Post-consumer bio-based textile wastes are any type of garment or household article made from manufactured bio-based textiles that the owner no longer needs and decides to discard. According to the hierarchy of waste management, post-consumer textile waste should be organically recycled. However, there is still a problem with the implementation of selective collection of textile waste followed by sorting, which would prepare the waste for organic recycling. A technically achievable strategy for sorted textile waste materials consisting of only one type of fiber material, multi-material textiles are a problem for recycling purposes. Waste textiles are composed of different materials, including natural as well as synthetic non-cellulosic fibers, making bioprocessing difficult. Various strategies for recovery of valuable polymers or monomers from textile waste, including concentrated and dilute acid hydrolysis, ionic liquids as well as enzymatic hydrolysis, have been discussed. One possible process for fiber recycling is fiber recovery. Fiber reclamation is extraction of fibers from textile waste and their reuse. To ensure that organic recycling is effective and that the degradation products of textile waste do not limit the quality and quantity of organic recycling products, bio-based textile waste should be biodegradable and compostable. Although waste textiles comprising a synthetic polymers fractions are considered a threat to the environment. However, their biodegradable part has great potential for production of biological products (e.g., ethanol and biogas, enzyme synthesis). A bio-based textile waste management system should promote the development and application of novel recycling techniques, such as further development of biochemical recycling processes and the textile waste should be preceded by recovery of non-biodegradable polymers to avoid contaminating the bioproducts with nano and microplastics.


  • Open Access

    Challenges in Sustainable Degradability of Bio-Based and Oxo-Degradable Packaging Materials during Anaerobic Thermophilic Treatment

    by Magdalena Zaborowska, Katarzyna Bernat, Bartosz Pszczółkowski, Irena Wojnowska-Baryła, Dorota Kulikowska

    Although the manufacturers labelled commercially available bio-based products as biodegradable, there are discrepancies concerning the time frame for their sustainable biodegradation and methane production. Starch-based, polylactic acid-based and oxo-degradable foils were anaerobically treated in thermophilic condition (55 °C, 100 days). The effect of alkaline pretreatment on foils degradation was also investigated. To examine changes in their mechanical and physical properties, static tensile tests and microscopic analyses, FTIR and surface roughness analyses were conducted. Despite the thermophilic condition, and the longer retention time compared to that needed for biowaste, a small amount of methane was produced with bio-based foils, even after pretreatment (ca. 30 vs. 50 L/kg VS) and foils only lost functional and mechanical properties. The pieces of bio-based materials had only disintegrated, which means that digestate may become contaminated with fragments of these materials. Thus, providing guidelines for bio-based foil treatment remains a challenge in waste management.


  • Open Access

    Anaerobic Degradability of Commercially Available Bio-Based and Oxo-Degradable Packaging Materials in the Context of their End of Life in the Waste Management Strategy

    by Magdalena Zaborowska, Katarzyna Bernat, Bartosz Pszczółkowski, Irena Wojnowska-Baryła, Dorota Kulikowska

    There are discrepancies concerning the time frame for biodegradation of different commercially available foils labeled as biodegradable; thus, it is essential to provide information about their biodegradability in the context of their end of life in waste management. Therefore, one-year mesophilic (37 °C) anaerobic degradation tests of two bio-based foils (based on starch (FS), polylactic acid (FPLA)) and oxo-degradable material (FOXO) were conducted in an OxiTop system. Biodegradation was investigated by measuring biogas production (BP) and analyzing structural changes with differential scanning calorimetry, polarizing and digital microscopic analyses, and Fourier transform infrared spectroscopy. After 1 year, FOXO had not degraded; thus, there were no visible changes on its surface and no BP. The bio-based materials produced small amounts of biogas (25.2, FPLA, and 30.4 L/kg VS, FS), constituting 2.1–2.5% of theoretical methane potential. The foil pieces were still visible and only starting to show damage; some pores had appeared in their structure. The structure of FPLA became more heterogeneous due to water diffusing into the structure. In contrast, the structure of FS became more homogenous although individual cracks and fissures appeared. The color of FS had changed, indicating that it was beginning to biodegrade. The fact that FS and FPLA showed only minor structural damage after a one-year mesophilic degradation indicates that, in these conditions, these materials would persist for an unknown but long amount of time.


  • Open Access

    Post-Treatment of the Effluent from Anaerobic Digestion of the Leachate in Two-Stage SBR System Using Alternative Carbon Sources

    by Katarzyna Bernat, Dorota Kulikowska, Magdalena Zielińska, Magdalena Zaborowska, Irena Wojnowska-Baryła, Magdalena Łapińska

    Although anaerobic digestion (AD) enables biogas production and facilitates renewable electricity production, its effluent must be post-treated before discarding it into the environment. However, during AD designing, the post-treatment step is often overlooked. This paper presents the kinetics and efficiency of nitrogen removal from effluent after AD of leachate from the aerobic stabilization of the organic fraction of municipal solid waste. A two-stage SBR system was used. An ammonium oxidation rate of 15.5 mg N-NH4/(L·h) ensured a 98% nitrification efficiency (I stage). For denitrification (II stage), alternative carbon sources (ACS) (molasses, crude glycerine, or distillery stillage) were used. Two volumetric exchange rates (n) were tested: 0.35 1/d (COD/N-NO3 ratio of 8) and 0.5 1/d (COD/N-NO3 of 7). With all ACS and COD/N-NO3 ratios, almost 100% of nitrate was denitrified; at the COD/N-NO3 of 8, biodegradable organics remained in the effluents. At the COD/N-NO3 of 7, the denitrification removal rates were lower (29.6-45.1 mg N-NOx/(L·h)) than at the ratio of 8 (72.1–159.5 mg N-NOx/(L·h)), because of temporal nitrite accumulation. The highest nitrate removal rates were obtained with molasses, the lowest with a distillery stillage. Considering the nitrate removal rate and the effluent COD concentration, molasses was recommended as the most effective carbon source for AD effluent treatment at the COD/N-NO3 of 7.


  • Open Access

    Insight into the Composition of the Stabilized Residual from a Full-Scale Mechanical-Biological Treatment (MBT) Plant in Terms of the Potential Recycling and Recovery of Its Contaminants

    by Katarzyna Bernat, Irena Wojnowska-Baryła, Magdalena Zaborowska, Izabela Samul

    There is a lack of knowledge about the composition and particle size distribution of the 60 mm, 60–40 mm, 40–10 mm) of the <80 mm fraction and SR, collected in all seasons (summer (S), autumn (A), winter (W), spring (Sp)), was determined. Biodegradable waste (vegetable waste, other organic waste, paper, cardboard) constituted from 44.1% (A) to 54.3% (Sp) of the <80 mm fraction and it decreased to 8.5% (W) to 17.1% (S) in the SR, after effective biodegradation. In SR, the smaller particle size fractions (up to 40 mm) predominated. The main contaminants in SR were plastic, glass, metal, and other waste. Hierarchical clustering indicated that the composition of the particle size fractions of SR was more similar across four seasons than that of the <80 mm fraction. After stabilization and separation, the share of contaminants increased in the SR size fractions, which means that their recovery before landfilling may be profitable. This suggests a new direction in waste management that would be consistent with the principles of a circular economy, in which a waste product, like SR, which previously could only be landfilled, becomes a source of secondary materials.


  • Open Access

    Effect of Bio-Based Products on Waste Management

    by Irena Wojnowska-Baryła, Dorota Kulikowska, Katarzyna Bernat

    This article focuses on the end-of-life management of bio-based products by recycling, which reduces landfilling. Bio-plastics are very important materials, due to their widespread use in various fields. The advantage of these products is that they primarily use renewable materials. At its end-of-life, a bio-based product is disposed of and becomes post-consumer waste. Correctly designing waste management systems for bio-based products is important for both the environment and utilization of these wastes as resources in a circular economy. Bioplastics are suitable for reuse, mechanical recycling, organic recycling, and energy recovery. The volume of bio-based waste produced today can be recycled alongside conventional wastes. Furthermore, using biodegradable and compostable bio-based products strengthens industrial composting (organic recycling) as a waste management option. If bio-based products can no longer be reused or recycled, it is possible to use them to produce bio-energy. For future effective management of bio-based waste, it should be determined how these products are currently being managed. Methods for valorizing bio-based products should be developed. Technologies could be introduced in conjunction with existing composting and anaerobic digestion infrastructure as parts of biorefineries. One option worth considering would be separating bio-based products from plastic waste, to maintain the effectiveness of chemical recycling of plastic waste. Composting bio-based products with biowaste is another option for organic recycling. For this option to be viable, the conditions which allow safe compost to be produced need to be determined and compost should lose its waste status in order to promote bio-based organic recycling.


  • Removal of bisphenol A (BPA) in a nitrifying system with immobilized biomass

    by Magdalena Zielińska, Agnieszka Cydzik-Kwiatkowska, Katarzyna Bernat, Katarzyna Bułkowska, Irena Wojnowska-Baryła


  • Nitrogen removal from wastewater with a low COD/N ratio at a low oxygen concentration

    by Katarzyna Bernat, Dorota Kulikowska, Magdalena Zielińska, Agnieszka Cydzik-Kwiatkowska, Irena Wojnowska-Baryła