Noritsugu Terashima
Research Subjects
Noritsugu Terashima has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Masato Yoshida
Graduate School of Bioagricultural Sciences , Nagoya University , Nagoya 464-8601 , Japan
3 shared publicationsUlla Westermark
Blekholmsterrassen 3, 11164 Stockholm, Sweden
3 shared publicationsKazuhiko Fukushima
Graduate School of Bioagricultural Sciences , Nagoya University , Nagoya 464-8601 , Japan
2 shared publications- Carlos Pascoal Neto
CICECO and Department of Chemistry, University of Aveiro, Aveiro, Portugal
1 shared publication Chisato Ko
Graduate School of Bioagricultural Science, Nagoya University, 464-8601 Japan
1 shared publication- Dmitry Victorovitch Evtuguin
CICECO—Aveiro Institute of Materials and Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
1 shared publication
Latest Publications
- Open Access
- 19 February 2024
- Published by The Lignin Society in Lignin
- Vol. 5, 1-26
Stable Isotope Tracer Methods in Lignin Research (Laboratory Manual for a Beginner)
Synthetic methods for 13C-labeled monolignol glycosides (coniferin, syringin and p-glucocoumaryl alcohol), with the label on the α-, β-, or γ-carbon of the side chain or 4-, 5-, 3-, or 1-carbon in the aromatic ring, are described. Synthetic procedures are given for dehydrogenation polymers (DHPs) from the coniferin and 13C-enriched cell wall-DHPs using isolated tree soft parts. Experimental procedures are also described for the 13C-enrichment of specific carbon atoms of cell wall lignin by feeding the 13C-labeled coniferin to ginkgo tree shoot. A beginner’s guide to these chemical experiments is included.
- 19 February 2024
- Published by The Lignin Society in Lignin
- Vol. 5, 1-26
Open AccessStable Isotope Tracer Methods in Lignin Research (Laboratory Manual for a Beginner)
Synthetic methods for 13C-labeled monolignol glycosides (coniferin, syringin and p-glucocoumaryl alcohol), with the label on the α-, β-, or γ-carbon of the side chain or 4-, 5-, 3-, or 1-carbon in the aromatic ring, are described. Synthetic procedures are given for dehydrogenation polymers (DHPs) from the coniferin and 13C-enriched cell wall-DHPs using isolated tree soft parts. Experimental procedures are also described for the 13C-enrichment of specific carbon atoms of cell wall lignin by feeding the 13C-labeled coniferin to ginkgo tree shoot. A beginner’s guide to these chemical experiments is included.
- 11 May 2023
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 77 (7) , 485-499
Role of monolignol glucosides in supramolecular assembly of cell wall components in ginkgo xylem formation
The physical, chemical and biological properties of wood depend on the supramolecular assembly of cellulose microfibrils (CMFs), hemicelluloses (HCs) and lignin in the growing cell walls. Based on the 13C-tracer studies of ginkgo xylem formation, a hypothetical scenario for the role of monolignol glucosides (MLGs) in the assembly is proposed as follows: (1) Both moieties, aglycone monolignols and glycone d-glucose (d-Glc), play essential roles in a cooperative manner in delivery of hydrophobic and highly reactive p-hydroxycinnamyl- (H), coniferyl- (G) alcohols to the hydrophilic site of lignin deposition. (2) The d-Glc liberated at lignification site is converted into essential HCs mainly via Golgi apparatus under the influence of diurnally changing turgor pressure, and partly converted in the apoplast. (3) At cell corner middle lamella, a pressure-resistant layer of HG-lignin-HCs-CMFs is formed, and allows expansion of new cells in cambium region by elevation of turgor pressure. The deformable G-lignin-HCs-CMFs layer at secondary wall shrinks by dehydration of the swollen gel of HCs-CMFs during differentiation, and contributes posture control of standing tree. On-demand quick supply of a large amount of monolignols and HCs can be achieved by the large storage and delivery of MLGs in the growing ginkgo xylem.
- 11 May 2023
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 77 (7) , 485-499
Role of monolignol glucosides in supramolecular assembly of cell wall components in ginkgo xylem formation
The physical, chemical and biological properties of wood depend on the supramolecular assembly of cellulose microfibrils (CMFs), hemicelluloses (HCs) and lignin in the growing cell walls. Based on the 13C-tracer studies of ginkgo xylem formation, a hypothetical scenario for the role of monolignol glucosides (MLGs) in the assembly is proposed as follows: (1) Both moieties, aglycone monolignols and glycone d-glucose (d-Glc), play essential roles in a cooperative manner in delivery of hydrophobic and highly reactive p-hydroxycinnamyl- (H), coniferyl- (G) alcohols to the hydrophilic site of lignin deposition. (2) The d-Glc liberated at lignification site is converted into essential HCs mainly via Golgi apparatus under the influence of diurnally changing turgor pressure, and partly converted in the apoplast. (3) At cell corner middle lamella, a pressure-resistant layer of HG-lignin-HCs-CMFs is formed, and allows expansion of new cells in cambium region by elevation of turgor pressure. The deformable G-lignin-HCs-CMFs layer at secondary wall shrinks by dehydration of the swollen gel of HCs-CMFs during differentiation, and contributes posture control of standing tree. On-demand quick supply of a large amount of monolignols and HCs can be achieved by the large storage and delivery of MLGs in the growing ginkgo xylem.
- Open Access
- 14 March 2016
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 70 (9) , 801-810
Monolignol glucosides as intermediate compounds in lignin biosynthesis. Revisiting the cell wall lignification and new 13C-tracer experiments with Ginkgo biloba and Magnolia liliiflora
A large amount of monolignol glucosides (MLGs: p-glucocoumaryl alcohol, coniferin, syringin) are found in lignifying soft xylem near cambium and they disappear with the progress of lignification. Recently, it became a matter of debate whether those MLGs are real intermediates in lignin biosynthesis or only a storage form of monolignols outside of the main biosynthetic pathway. The latter is partly based on a misinterpretation of 14C-tracer experiments and partly on the simple generalization of the results of gene manipulation experiments concerning the flexible and complex lignification. In the present paper, it could be confirmed by the most reliable 13C-tracer method that MLGs are real intermediates in the pathway from l-phenylalanine to macromolecular lignin-polysaccharides complexes in the cell walls. This pathway via MLGs is essential for transport and programmed delivery of specific monolignols in a stable form from intracellular space to specific lignifying sites within the cell wall. The pool size of MLGs is large in most gymnosperm trees and some angiosperm species that emerged in an early stage of phylogeny, while the pool size is small in most angiosperms. This difference in pool size is reasonably understandable from the viewpoint of plant evolution, in the course of which the role of MLGs changed to meet variation in type of major cells, reaction wood formation, and postmortem lignification.
- 14 March 2016
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 70 (9) , 801-810
Open AccessMonolignol glucosides as intermediate compounds in lignin biosynthesis. Revisiting the cell wall lignification and new 13C-tracer experiments with Ginkgo biloba and Magnolia liliiflora
A large amount of monolignol glucosides (MLGs: p-glucocoumaryl alcohol, coniferin, syringin) are found in lignifying soft xylem near cambium and they disappear with the progress of lignification. Recently, it became a matter of debate whether those MLGs are real intermediates in lignin biosynthesis or only a storage form of monolignols outside of the main biosynthetic pathway. The latter is partly based on a misinterpretation of 14C-tracer experiments and partly on the simple generalization of the results of gene manipulation experiments concerning the flexible and complex lignification. In the present paper, it could be confirmed by the most reliable 13C-tracer method that MLGs are real intermediates in the pathway from l-phenylalanine to macromolecular lignin-polysaccharides complexes in the cell walls. This pathway via MLGs is essential for transport and programmed delivery of specific monolignols in a stable form from intracellular space to specific lignifying sites within the cell wall. The pool size of MLGs is large in most gymnosperm trees and some angiosperm species that emerged in an early stage of phylogeny, while the pool size is small in most angiosperms. This difference in pool size is reasonably understandable from the viewpoint of plant evolution, in the course of which the role of MLGs changed to meet variation in type of major cells, reaction wood formation, and postmortem lignification.
- 13 May 2012
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 66 (8) , 907-915
Proposed supramolecular structure of lignin in softwood tracheid compound middle lamella regions
The structure of lignin in the compound middle lamella (CML) of softwood tracheids differs from that in the secondary wall (SW) in regard to the content of condensed structures (5-5′-biphenyl, dibenzodioxocin and 4-O-5′-diphenyl ether). In an early stage of cell wall formation, random coarse networks composed of thin cellulose microfibrils (CMFs), hemicelluloses, and pectin are formed in the CML, then globular p-hydroxyphenyl/guaiacyl lignin (HG-lignin) is deposited quickly into the network. The globular lignin is assumed to be a micellar aggregate of oligolignols folded at the β-O-4 bond with their phenolic ends on the outer part of the aggregate. When 3D clusters of the globules are deposited on the preformed network of polysaccharides, further growth of the oligolignols by endwise addition of new monolignols is spatially limited, so frequent condensation occurs between growing aromatic ends of adjacent HG-oligolignols within the globule and between the wide contact boundaries of the 3D clustered globules to produce a highly condensed supramolecule in CML. In SW, the folded G-oligolignols are deposited slowly in the narrow tubular space surrounding thick CMFs coated with hemicelluloses. Condensation occurs mostly between adjacent growing ends of the oligolignols within the tubular aggregates. Spatial regulation of condensation of folded polylignols is one of the factors producing a different supramolecular structure for CML lignin than for SW lignin.
- 13 May 2012
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 66 (8) , 907-915
Proposed supramolecular structure of lignin in softwood tracheid compound middle lamella regions
The structure of lignin in the compound middle lamella (CML) of softwood tracheids differs from that in the secondary wall (SW) in regard to the content of condensed structures (5-5′-biphenyl, dibenzodioxocin and 4-O-5′-diphenyl ether). In an early stage of cell wall formation, random coarse networks composed of thin cellulose microfibrils (CMFs), hemicelluloses, and pectin are formed in the CML, then globular p-hydroxyphenyl/guaiacyl lignin (HG-lignin) is deposited quickly into the network. The globular lignin is assumed to be a micellar aggregate of oligolignols folded at the β-O-4 bond with their phenolic ends on the outer part of the aggregate. When 3D clusters of the globules are deposited on the preformed network of polysaccharides, further growth of the oligolignols by endwise addition of new monolignols is spatially limited, so frequent condensation occurs between growing aromatic ends of adjacent HG-oligolignols within the globule and between the wide contact boundaries of the 3D clustered globules to produce a highly condensed supramolecule in CML. In SW, the folded G-oligolignols are deposited slowly in the narrow tubular space surrounding thick CMFs coated with hemicelluloses. Condensation occurs mostly between adjacent growing ends of the oligolignols within the tubular aggregates. Spatial regulation of condensation of folded polylignols is one of the factors producing a different supramolecular structure for CML lignin than for SW lignin.
- 7 May 2009
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 63 (4) , 379-384
2D-NMR (HSQC) difference spectra between specifically 13C-enriched and unenriched protolignin of Ginkgo biloba obtained in the solution state of whole cell wall material
In the structural analysis of lignins by 13C-NMR, signal overlap limits definitive assignment and accurate intensity measurement. Selective labeling by 13C-enrichment of a specific carbon in lignin enhances its signal intensity in the spectrum. Further enhancement of the specifically labeled carbons can be realized via difference spectra created from the enriched and unenriched samples. Difference 2D 13C-1H correlation (HSQC) NMR spectra, derived from the spectra of specifically 13C-enriched lignin model polymers (so-called dehydrogenation polymers) and their unenriched counterparts, take advantage of the enhanced dispersion afforded by both 13C and 1H chemical shifts, diminishing the difficulties arising from the signal-overlap problem and aiding in definitive signal assignments. In this research, protolignin in xylem cell walls was specifically 13C-enriched at all of the individual phenylpropanoid side-chain carbons by feeding 13C-enriched coniferins to growing stems of Ginkgo biloba. The whole xylem fractions containing 13C-enriched and unenriched protolignins were dissolved in a mixture of N-methylimidazole and DMSO, and then acetylated. Solution state 2D-NMR (HSQC) spectra of the acetylated whole cell wall were acquired. Difference spectra between the walls containing 13C-enriched and unenriched lignins afforded simplified 2D spectra in which well-separated signals were assigned exclusively to the specifically enriched carbons. This novel NMR technique provides a useful tool for elucidation of entire protolignin in the cell wall of ginkgo xylem.
- 7 May 2009
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 63 (4) , 379-384
2D-NMR (HSQC) difference spectra between specifically 13C-enriched and unenriched protolignin of Ginkgo biloba obtained in the solution state of whole cell wall material
In the structural analysis of lignins by 13C-NMR, signal overlap limits definitive assignment and accurate intensity measurement. Selective labeling by 13C-enrichment of a specific carbon in lignin enhances its signal intensity in the spectrum. Further enhancement of the specifically labeled carbons can be realized via difference spectra created from the enriched and unenriched samples. Difference 2D 13C-1H correlation (HSQC) NMR spectra, derived from the spectra of specifically 13C-enriched lignin model polymers (so-called dehydrogenation polymers) and their unenriched counterparts, take advantage of the enhanced dispersion afforded by both 13C and 1H chemical shifts, diminishing the difficulties arising from the signal-overlap problem and aiding in definitive signal assignments. In this research, protolignin in xylem cell walls was specifically 13C-enriched at all of the individual phenylpropanoid side-chain carbons by feeding 13C-enriched coniferins to growing stems of Ginkgo biloba. The whole xylem fractions containing 13C-enriched and unenriched protolignins were dissolved in a mixture of N-methylimidazole and DMSO, and then acetylated. Solution state 2D-NMR (HSQC) spectra of the acetylated whole cell wall were acquired. Difference spectra between the walls containing 13C-enriched and unenriched lignins afforded simplified 2D spectra in which well-separated signals were assigned exclusively to the specifically enriched carbons. This novel NMR technique provides a useful tool for elucidation of entire protolignin in the cell wall of ginkgo xylem.
- 1 September 2004
- Published by MathDoc/Centre Mersenne in Comptes Rendus. Biologies
- Vol. 327 (9-10) , 903-910
Formation of macromolecular lignin in ginkgo xylem cell walls as observed by field emission scanning electron microscopy
Formation of macromolecular lignin in ginkgo cell walls. In the lignifying process of xylem cell walls, macromolecular lignin is formed by polymerization of monolignols on the pectic substances, hemicellulose and cellulose microfibrils that have deposited prior to the start of lignification. Observation of lignifying secondary cell walls of ginkgo tracheids by field emission scanning electron microscopy suggested that lignin–hemicellulose complexes are formed as tubular bead-like modules surrounding the cellulose microfibrils (CMFs), and that the complexes finally fill up the space between CMFs. The size of one tubular bead-like module in the middle layer of the secondary wall (S2) was tentatively estimated to be about 16 ± 2 nm in length, about 25 ± 1 nm in outer diameter, with a wall thickness of 4 ± 2 nm ; the size of the modules in the outer layer of the secondary wall (S1) was larger and they were thicker-walled than that in the middle layer (S2). Aggregates of large globular modules were observed in the cell corner and compound middle lamella. It was suggested that the structure of non-cellulosic polysaccharides and mode of their association with CMFs may be important factors controlling the module formation and lignin concentration in the different morphological regions of the cell wall.
- 1 September 2004
- Published by MathDoc/Centre Mersenne in Comptes Rendus. Biologies
- Vol. 327 (9-10) , 903-910
Formation of macromolecular lignin in ginkgo xylem cell walls as observed by field emission scanning electron microscopy
Formation of macromolecular lignin in ginkgo cell walls. In the lignifying process of xylem cell walls, macromolecular lignin is formed by polymerization of monolignols on the pectic substances, hemicellulose and cellulose microfibrils that have deposited prior to the start of lignification. Observation of lignifying secondary cell walls of ginkgo tracheids by field emission scanning electron microscopy suggested that lignin–hemicellulose complexes are formed as tubular bead-like modules surrounding the cellulose microfibrils (CMFs), and that the complexes finally fill up the space between CMFs. The size of one tubular bead-like module in the middle layer of the secondary wall (S2) was tentatively estimated to be about 16 ± 2 nm in length, about 25 ± 1 nm in outer diameter, with a wall thickness of 4 ± 2 nm ; the size of the modules in the outer layer of the secondary wall (S1) was larger and they were thicker-walled than that in the middle layer (S2). Aggregates of large globular modules were observed in the cell corner and compound middle lamella. It was suggested that the structure of non-cellulosic polysaccharides and mode of their association with CMFs may be important factors controlling the module formation and lignin concentration in the different morphological regions of the cell wall.