SWScott S. Washburn

Scott S. Washburn

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Scott S. Washburn has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Level of Service Analysis Methodology for Rural Highway Facilities

    by Sajid Raza, Ahmed Al-Kaisy, Scott S. Washburn

    Rural highways constitute a significant proportion of the US highway system, serving vital mobility functions for people and freight. With urban expansion, rural highways experience increased traffic demand, leading to congestion, delays, and a decline in operational performance and quality of service. Despite their significance, rural highways receive limited improvement funds, compared with urban roadways, necessitating efficient analytical assessment of operational performance. The Highway Capacity Manual (HCM) offers comprehensive methodologies for assessing individual highway components, such as two-lane and multilane highway segments, and isolated intersections. Additionally, it offers facility-level analysis methodologies for freeways and urban street facilities. However, it lacks a facility-level analysis methodology for rural highways—essential for understanding and managing traffic operations over extended lengths of rural highway. A rural highway facility may consist of any combination of connected roadway components, including two-lane highway segments, multilane highway segments, and rural intersections. The absence of a facility-level assessment method limits the ability of transportation agencies to comprehensively evaluate the performance of rural highways over extended lengths, where interactions between segments and junctions significantly influence traffic operations. A methodology for quality-of-service analysis of rural highways at the facility level is developed to address this gap; it strictly adheres to the HCM’s “level of service” concept, ensuring sensitivity to users’ perceptions of operational performance. It is significant because drivers evaluate entire trips, rather than individual road segments and intersections. This research offers valuable insights for transportation planners and engineers, supporting more effective decision-making for rural highway management, investment, and policy development.

  • Open Access

    Evaluating quality of service for bicyclists on rural highways: insights from a comprehensive user survey and mixed-logit analysis

    by Ana Tsui Moreno, Yangqian Cai, Santiago Linares-Ramirez, Scott S. Washburn, Ahmed Al-Kaisy, Jorge Barrios, Bastian Schroeder

    Cycling on rural highways presents comfort and safety concerns due to the large speed differentials between bicyclists and automobiles. A shortcoming of the current operational methods for rural highways is the limited consideration of quality of service for non-motorized users. This research aims to determine which variables are most relevant to bicyclists cycling (or not) on rural highways and their operational cycling preferences. An online survey collected 982 responses from individuals who cycle on rural highways in the United States. Eight choice tasks were presented with six factors: pavement quality, automobile traffic level, posted speed limit, roadside design, context class, and grade. These factors were obtained from a preliminary survey targeting highway analysis and design practitioners. The results of a mixed-logit model analysis suggest that the presence of a shoulder and its width are the most critical factors to a cyclist’s perceived quality of service on a rural highway. We found that the difference between rural-town and suburban contexts was minor compared to rural contexts. The results demonstrate how cyclist types influence their overall willingness to cycle and their preferences for scenario-specific attributes. This opens the discussion to include different sets of thresholds to assess service levels as a function of cyclist type, following the level of traffic stress approach, and separate perception models by cyclist type. These results should inform recommendations for future research on improving existing evaluations related to bicycling on rural highways.


  • Open Access

    Evaluating Quality of Service for Bicyclists on Rural Highways: Insights from a Comprehensive User Survey and Mixed-Logit Analysis

    by Ana Tsui Moreno, Yangqian Cai, Santiago Linares-Ramirez, Scott S. Washburn, Ahmed Al-Kaisy, Jorge Barrios, Bastian Schroeder

    Cycling on rural highways presents comfort and safety concerns due to the large speed differentials between bicyclists and automobiles. A shortcoming of the current operational methods for rural highways is the limited consideration of quality of service for non-motorized users. This research aims to determine which variables are most relevant to bicyclists cycling (or not) on rural highways and their operational cycling preferences. An online survey collected 982 responses from individuals who cycle on rural highways in the United States. Eight choice tasks were presented with six factors: pavement quality, automobile traffic level, posted speed limit, roadside design, context class, and grade. These factors were obtained from a preliminary survey targeting highway analysis and design practitioners. The results of a mixed-logit model analysis suggest that the presence of a shoulder and its width are the most critical factors to a cyclist's perceived quality of service on a rural highway. We found that the difference between rural-town and suburban contexts was minor compared to rural contexts. The results demonstrate how cyclist types influence their overall willingness to cycle and their preferences for scenario-specific attributes. This opens the discussion to include different sets of thresholds to assess service levels as a function of cyclist type, following the level of traffic stress approach, and separate perception models by cyclist type. These results should inform recommendations for future research on improving existing evaluations related to bicycling on rural highways.

  • Influence Area at Signalized and Stop-Control Intersections: Operational Analysis

    by Sajid Raza, Ahmed Al-Kaisy, Scott Washburn, Jorge Barrios, Ana Tsui Moreno, Bastian Schroeder

    Understanding the influence of intersections on operating conditions along connecting roadway segments is important for the analysis of highway facilities and corridors. This study aims at assessing the influence area at signalized and stop-control intersections along rural corridors. The study used speed as a performance measure in examining the spatial extent of operational effects at intersections. High-fidelity connected vehicle (CV) trajectory data, collected at 11 different sites in Florida, was used in this study. The CV trajectory data consists of individual waypoints that included timestamps and location coordinates along with other attributes. Drivers’ speed profiles while driving through the intersection were established and analyzed to determine the length of upstream and downstream influence areas. Quantile regression models were developed to estimate the 50th, 70th, and 85th percentiles of upstream and downstream influence areas separately for signalized and stop-control intersections. Study results indicate that the upstream influence area is longer for a signalized intersection than for a stop-control intersection for comparable segment running speeds. Further, the downstream influence area is significantly longer than the upstream influence area at signalized intersections, and this was consistent at all study sites. Traffic flow level did not have a significant effect on the upstream or downstream influence area; however, midblock running speed, percent heavy vehicles, and facility type (multilane versus two-lane) were found to significantly affect the upstream and downstream influence areas at signalized intersections.


  • Open Access

    Using Traffic Simulation for Level of Service Traveller Perception Studies

    by Fernando Jose Piva, José Reynaldo Setti, Scott Washburn

    Level of service (LOS) classifications of traffic oper-ational conditions play a significant role in roadway-im-provement funding decisions. Traveller perception of LOS should be consistent with traffic analysis values to avoid undermining the public confidence in the transpor-tation agency decisions. Research methods to study trav-eller perceptions range from in-vehicle videos to focus groups and surveys. These methods have different advan-tages, but all suffer from time and/or cost inefficiencies for collecting data sets across a wide range of operating conditions. This paper describes a novel method to study this topic with increased time and cost efficiency. This new method combines traffic microsimulation and 3-D visualisation capabilities. The focus of this paper is to provide guidance on how to apply traffic microsimula-tion and computer 3-D visualisation to evaluate highway trip quality from a traveller’s perspective. It discusses the creation of the simulation environment to produce a real-istic view from the vehicle’s cabin interior, including the network creation, landscaped area, dashboard speedom-eter, and rear-view mirror. The authors also propose an automated method for choosing an appropriate vehicle within the simulated traffic stream, such that the desired overall traffic stream conditions are conveyed to the trav-eller vehicle within the field of view.


  • Freeway Network Travel Time Reliability Analysis Methodology and Software Tool Development

    by Wei Sun, Scott S. Washburn

    Applications in the field often require analysis of freeway travel time reliability (TTR) at the network level. While micro-simulation is suitable for performing network-level analysis, the computational burden can become unreasonable when TTR analysis is factored in. As for macro-simulation, most network analysis studies often use simplified link performance functions to represent the travel time and flow relationship. Such functions are not generally sensitive to the range of geometric and traffic conditions that can influence freeway facility operations. This research extends the Highway Capacity Manual (HCM) freeway TTR analysis methodology to the network level. The proposed freeway network TTR analysis methodology generates scenarios that represent the impacts of origin–destination (OD) demand variations, weather events, incident events, and work zone events on freeway network travel time. For each scenario, the methodology performs user equilibrium (UE) traffic assignment and the HCM freeway facility core methodology is applied to represent the travel time and flow relationship. The method of successive average approach is applied to solve the UE traffic assignment. Finally, scenario travel times (and/or other performance measures) are aggregated into various distributions of interest, such as the network-, facility-, and OD-level distributions, and TTR performance measures are calculated at the three different levels. A software tool is developed using C# language on the .NET Framework. The software tool provides a convenient and efficient approach for transportation planners and researchers to conduct the freeway network TTR analysis, which helps to bridge the gap between research and practice.


  • Evaluation of the effective length of passing lanes on two-lane highways

    by Amirhossein Jafari, Ahmed Al-Kaisy, Scott Washburn

    This study presents an investigation into effective length of passing lanes on rural two-lane highways using field and simulation data. Field data from two study sites in Oregon were used to calibrate and validate the traffic simulation program used in this study. The calibrated simulation model was then used in evaluating the effective length of passing lane under different traffic levels and percent no-passing zones. Study results showed that the effective length of a passing lane is a function of traffic level as well as the percent no-passing zones for any segment of two-lane highway. Further, results confirmed that the operational benefits of passing lanes generally last for a significant distance downstream of the passing lane, with this distance varying in the range between 3 and 20 miles depending on traffic level and percent no-passing zones. Expectedly, higher traffic levels and higher percentage of no-passing zones were found to result in shorter effective lengths.

  • Evaluation of Models to Estimate Percent Time Spent Following on Two-Lane Highways

    by José Elievam Bessa, José Reynaldo Setti, Scott S. Washburn

    Four analytical models to estimate percent time spent following (PTSF) on two-lane highways were tested with data from 16 sites in Brazil. Besides percent following, the models are based on shockwave analysis, moving-bottleneck theory, or queuing theory. As direct measurement of the PTSF is impractical, PTSF values produced by a simulation program were the basis for comparison (observed PTSF values). The quality of the PTSF estimates produced by the four models was tested using 442 observations and four goodness-of-fit functions [mean normalized error (MNE), mean absolute normalized error (MANE), root-mean squared normalized error (RMSNE), and correlation coefficient r ]. Although some degree of correlation between the estimated and observed PTSF values was detected, none of the four models was able to provide reliable estimates of PTSF, as indicated by high mean normalized errors (around 35%) and mean absolute normalized errors that were, on average, close to 50%.