Gia-Diem Pham
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gia-Diem Pham has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Cong-Truong Dinh
School of Mechanical Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
12 shared publications - Thai-Son Vu
School of Mechanical Engineering, Hanoi University of Science and Technology, 1 Dai Co Viet St., Hai Ba Trung Dist., Hanoi 11615, Vietnam
7 shared publications - Hoang-Quan Chu
Institute of Vehicle and Energy Engineering, Le Quy Don Technical University, Hanoi, Vietnam
6 shared publications - Trung-Kien Nguyen
Institute of Vehicle and Energy Engineering, Le Quy Don Technical University, 236 Hoang Quoc Viet St., Bac Tu Liem Dist., Hanoi 11917, Vietnam
4 shared publications - Nhat-Minh Hoang
Viettel Aerospace Institute, Viettel Building—Hoa Lac Hi-Tech Park, Thach That, Hanoi 13112, Vietnam
3 shared publications - Quang-Ngoc Dinh
School of Mechanical Engineering, Hanoi University of Science and Technology, 1 Dai Co Viet St., Hai Ba Trung Dist., Hanoi 11615, Vietnam
3 shared publications
Latest Publications
- Open Access
Aerodynamic Characteristics of Ducted Propulsion Fan Using Secondary Air Intake
Ducted propulsion fans are widely recognized for their ability to enhance aerodynamic efficiency and operational safety by utilizing a surrounding shroud to contain the flow and mitigate blade tip losses. However, maximizing thrust and optimizing internal flow dynamics remain critical challenges in further improving their aerodynamic performance. This study investigates the aerodynamic characteristics of a ducted propulsion fan configured with a secondary air intake channel designed to enhance mass flow ingestion. Utilizing Reynolds-Averaged Navier–Stokes (RANS) simulations coupled with the Shear Stress Transport (SST) k-omega turbulence model, the internal flow dynamics and aerodynamic efficiency of configurations both with and without the secondary air intake channel are examined. The secondary air intake, strategically located adjacent to the rotor blade tip, increases the mass flow rate and, consequently, enhances thrust. Physically, this configuration successfully reinjects bypass flow to mitigate tip leakage vortices, significantly reducing the low-velocity wake regions adjacent to the rotor tip. Several configurations were evaluated by systematically varying the intake channel’s position, curvature, and the dimensions of its inlet and outlet ports under static conditions at 6000 rpm. Numerical results demonstrate that the optimal design improves thrust by an additional 2.2% compared to the baseline ducted fan without the auxiliary intake port due to the mitigated tip vortices and stabilized flow field.
Open AccessAerodynamic Characteristics of Ducted Propulsion Fan Using Secondary Air Intake
Ducted propulsion fans are widely recognized for their ability to enhance aerodynamic efficiency and operational safety by utilizing a surrounding shroud to contain the flow and mitigate blade tip losses. However, maximizing thrust and optimizing internal flow dynamics remain critical challenges in further improving their aerodynamic performance. This study investigates the aerodynamic characteristics of a ducted propulsion fan configured with a secondary air intake channel designed to enhance mass flow ingestion. Utilizing Reynolds-Averaged Navier–Stokes (RANS) simulations coupled with the Shear Stress Transport (SST) k-omega turbulence model, the internal flow dynamics and aerodynamic efficiency of configurations both with and without the secondary air intake channel are examined. The secondary air intake, strategically located adjacent to the rotor blade tip, increases the mass flow rate and, consequently, enhances thrust. Physically, this configuration successfully reinjects bypass flow to mitigate tip leakage vortices, significantly reducing the low-velocity wake regions adjacent to the rotor tip. Several configurations were evaluated by systematically varying the intake channel’s position, curvature, and the dimensions of its inlet and outlet ports under static conditions at 6000 rpm. Numerical results demonstrate that the optimal design improves thrust by an additional 2.2% compared to the baseline ducted fan without the auxiliary intake port due to the mitigated tip vortices and stabilized flow field.
- Open Access
Correction: Chu et al. Static Aero-Propulsion Experiment of an Electric Ducted Fan. Aerospace 2025, 12, 509
- Open Access
- 27 April 2026
- Published by MDPI AG in Preprints.org
Aerodynamic Characteristics of Ducted Propulsion Fan Using Secondary Air Intake
Today, the aviation industry is transitioning from fossil fuel to renewable energy. Re-newable energy systems have advantages, such as cleanliness and reduced emissions, but also face limitations in battery energy density and aerodynamic performance dur-ing operation. Therefore, electric ducted propulsion fans (eDPFs) are a promising so-lution that uses duct components to enhance aerodynamic efficiency and operational safety. This study utilizes average Navier-Stokes analysis, incorporating Reynolds numbers and a k-ω SST turbulence model, to examine eDPF configurations both with and without a secondary air intake channel, concentrating on internal flow dynamics and aerodynamic efficiency. The air intake channel, which is located close to the tip of the rotor blade, helps the eDPF move more mass and create more thrust. Several dif-ferent configurations of the secondary air intake channel were tested by varying the intake channel position, curvature, and size of the inlet and outlet ports under static conditions at 6000 rpm. The best design improved thrust by an additional 2.2% com-pared to the baseline case without the auxiliary intake port
- 27 April 2026
- Published by MDPI AG in Preprints.org
Open AccessAerodynamic Characteristics of Ducted Propulsion Fan Using Secondary Air Intake
Today, the aviation industry is transitioning from fossil fuel to renewable energy. Re-newable energy systems have advantages, such as cleanliness and reduced emissions, but also face limitations in battery energy density and aerodynamic performance dur-ing operation. Therefore, electric ducted propulsion fans (eDPFs) are a promising so-lution that uses duct components to enhance aerodynamic efficiency and operational safety. This study utilizes average Navier-Stokes analysis, incorporating Reynolds numbers and a k-ω SST turbulence model, to examine eDPF configurations both with and without a secondary air intake channel, concentrating on internal flow dynamics and aerodynamic efficiency. The air intake channel, which is located close to the tip of the rotor blade, helps the eDPF move more mass and create more thrust. Several dif-ferent configurations of the secondary air intake channel were tested by varying the intake channel position, curvature, and size of the inlet and outlet ports under static conditions at 6000 rpm. The best design improved thrust by an additional 2.2% com-pared to the baseline case without the auxiliary intake port
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Heat transfer characteristics of pin-fin arrays with coupled trapezoidal ribbed endwalls in gas turbine blade internal cooling channels
For internal cooling of the turbine blade, pin-fin arrays located near the blade's trailing edge are essential for enhancing heat transfer and preserving structural integrity. However, the flat end wall of a conventional pin-fin channel tends to generate wake vortices, resulting in low heat transfer regions. To overcome this limitation, a new end wall design, termed the coupled trapezoidal ribbed end wall (CTRE), is proposed to improve overall heat transfer performance. Numerical simulations were performed by solving the Reynolds-averaged Navier–Stokes equations with the k−ω turbulence model. The CTRE design consists of an upstream rib and a downstream rib positioned lower and higher than the pin-fin base, respectively. The recirculating flow generated by the CTRE continuously interacts with the pin-fins and strengthens the horseshoe vortices, thereby expanding the high heat transfer regions. Moreover, the upward flow induced by the downstream rib interacts with the wake flow and weakens the wake vortices, further diminishing the low heat transfer regions behind the pin-fins. Consequently, the CTRE configuration yields a significant enhancement in the average Nusselt number (Nu) and the heat transfer efficiency index (HTEI), while introducing only a slight increase in the friction factor. Specifically, the new end wall design enhances average Nu by approximately 91.88%–103.04% and HTEI by 74.15%–78.05% over a Reynolds number range of Re=7400–36000. Six geometric parameters of the CTRE design were investigated, including the height, long-base length, and short-base length of the upstream and downstream ribs. The results provide valuable insights into the physical mechanisms associated with geometric variations.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Heat transfer characteristics of pin-fin arrays with coupled trapezoidal ribbed endwalls in gas turbine blade internal cooling channels
For internal cooling of the turbine blade, pin-fin arrays located near the blade's trailing edge are essential for enhancing heat transfer and preserving structural integrity. However, the flat end wall of a conventional pin-fin channel tends to generate wake vortices, resulting in low heat transfer regions. To overcome this limitation, a new end wall design, termed the coupled trapezoidal ribbed end wall (CTRE), is proposed to improve overall heat transfer performance. Numerical simulations were performed by solving the Reynolds-averaged Navier–Stokes equations with the k−ω turbulence model. The CTRE design consists of an upstream rib and a downstream rib positioned lower and higher than the pin-fin base, respectively. The recirculating flow generated by the CTRE continuously interacts with the pin-fins and strengthens the horseshoe vortices, thereby expanding the high heat transfer regions. Moreover, the upward flow induced by the downstream rib interacts with the wake flow and weakens the wake vortices, further diminishing the low heat transfer regions behind the pin-fins. Consequently, the CTRE configuration yields a significant enhancement in the average Nusselt number (Nu) and the heat transfer efficiency index (HTEI), while introducing only a slight increase in the friction factor. Specifically, the new end wall design enhances average Nu by approximately 91.88%–103.04% and HTEI by 74.15%–78.05% over a Reynolds number range of Re=7400–36000. Six geometric parameters of the CTRE design were investigated, including the height, long-base length, and short-base length of the upstream and downstream ribs. The results provide valuable insights into the physical mechanisms associated with geometric variations.
- Open Access
Numerical Investigation of Rim Seal Flow in a Single-Stage Axial Turbine
This study investigates rim seal flow in axial turbine configurations through a combined experimental–numerical approach, with the objective of identifying sealing-flow conditions that minimize ingestion while limiting aerodynamic losses. Experimental measurements from the University of BATH are used to validate computational methodology, ensuring consistency with established sealing-effectiveness trends. The work places particular emphasis on the influence of computational domain selection and interface treatment, which is shown to strongly affect the prediction of ingestion mechanisms. A key contribution of this study is the systematic assessment of multiple domain configurations, demonstrating that a frozen rotor MRF formulation provides the most reliable steady-state representation of pressure-driven ingress, whereas stationary and non-interface domains tend to overpredict sealing effectiveness. A simplified thin-seal model is also evaluated and found to offer an efficient alternative for global performance predictions. Furthermore, a statistical orifice-based model is introduced to estimate minimum sealing flow for different rim seal geometries, providing a practical engineering tool for purge-flow scaling. The effects of pre-swirl injection are examined and shown to substantially reduce rotor wall shear and moment coefficient, contributing to lower windage losses without significantly modifying sealing characteristics. Unsteady flow features are explored using a harmonic balance method, revealing Kelvin–Helmholtz-type instabilities that drive large-scale structures within the rim seal cavity, particularly near design-speed operation. Finally, results highlight a clear trade-off between sealing-flow rate and turbine isentropic efficiency, underlining the importance of optimized purge-flow management.
Open AccessNumerical Investigation of Rim Seal Flow in a Single-Stage Axial Turbine
This study investigates rim seal flow in axial turbine configurations through a combined experimental–numerical approach, with the objective of identifying sealing-flow conditions that minimize ingestion while limiting aerodynamic losses. Experimental measurements from the University of BATH are used to validate computational methodology, ensuring consistency with established sealing-effectiveness trends. The work places particular emphasis on the influence of computational domain selection and interface treatment, which is shown to strongly affect the prediction of ingestion mechanisms. A key contribution of this study is the systematic assessment of multiple domain configurations, demonstrating that a frozen rotor MRF formulation provides the most reliable steady-state representation of pressure-driven ingress, whereas stationary and non-interface domains tend to overpredict sealing effectiveness. A simplified thin-seal model is also evaluated and found to offer an efficient alternative for global performance predictions. Furthermore, a statistical orifice-based model is introduced to estimate minimum sealing flow for different rim seal geometries, providing a practical engineering tool for purge-flow scaling. The effects of pre-swirl injection are examined and shown to substantially reduce rotor wall shear and moment coefficient, contributing to lower windage losses without significantly modifying sealing characteristics. Unsteady flow features are explored using a harmonic balance method, revealing Kelvin–Helmholtz-type instabilities that drive large-scale structures within the rim seal cavity, particularly near design-speed operation. Finally, results highlight a clear trade-off between sealing-flow rate and turbine isentropic efficiency, underlining the importance of optimized purge-flow management.
- Open Access
- 5 November 2025
- Published by MDPI AG in Preprints.org
Numerical Investigation of Rim Seal Flow in a Single-Stage Axial Compressor
This study conducts experimental and modeling analyses to comprehend the unsteady flow phenomena within cavity gaps, with a specific focus on finding the optimal rim seal flow rate for enhancing turbine efficiency. The rim seal flow phenomenon is investigated and validated against the University of BATH's single-stage turbine experiment rig. The emphasis is on the steady-state computation of rim seal qualities using passive-scalar transport for tracer gas modeling, with limited exploration of unsteady phenomena. The LISA 1.5 stage model from Zurich University serves as a baseline for turbine efficiency studies, incorporating the rim seal configuration. The computational domain's influence, including the turbomachinery Multi-Reference Frame approach, is investigated. While the Frozen Rotor accurately predicts ingression flow fields, the no-interface model poorly predicts ingression, favoring a simplified "thin seal" model. A statistical approach is introduced for the "Orifice" model to implicitly calculate the minimum sealing flow for each rim seal configuration. Pre-swirling the rim seal demonstrates a reduction in shear forces on the rotor wall, consequently lowering friction torque on the rotor disc. However, swirling flow appears ineffective in influencing ingression and egression due to the model's long propagate distance. In addition to steady-state investigations, the harmonic balance method explores unsteady phenomena in Axial turbine configuration. Kelvin-Helmholtz instabilities within the rim seal gap are observed, acting as driving mechanisms for large-scale structures at 98% rotor speed. Incorporating wheel-space cavities in the LISA 1-stage model significantly alters flow phenomena and turbine efficiency. Rotor-stator interaction at specific times can complicate wheel space sealing, contrary to bladeless model predictions. Furthermore, an increase in rim seal flow is associated with reduced turbine isentropic efficiency.
- 5 November 2025
- Published by MDPI AG in Preprints.org
Open AccessNumerical Investigation of Rim Seal Flow in a Single-Stage Axial Compressor
This study conducts experimental and modeling analyses to comprehend the unsteady flow phenomena within cavity gaps, with a specific focus on finding the optimal rim seal flow rate for enhancing turbine efficiency. The rim seal flow phenomenon is investigated and validated against the University of BATH's single-stage turbine experiment rig. The emphasis is on the steady-state computation of rim seal qualities using passive-scalar transport for tracer gas modeling, with limited exploration of unsteady phenomena. The LISA 1.5 stage model from Zurich University serves as a baseline for turbine efficiency studies, incorporating the rim seal configuration. The computational domain's influence, including the turbomachinery Multi-Reference Frame approach, is investigated. While the Frozen Rotor accurately predicts ingression flow fields, the no-interface model poorly predicts ingression, favoring a simplified "thin seal" model. A statistical approach is introduced for the "Orifice" model to implicitly calculate the minimum sealing flow for each rim seal configuration. Pre-swirling the rim seal demonstrates a reduction in shear forces on the rotor wall, consequently lowering friction torque on the rotor disc. However, swirling flow appears ineffective in influencing ingression and egression due to the model's long propagate distance. In addition to steady-state investigations, the harmonic balance method explores unsteady phenomena in Axial turbine configuration. Kelvin-Helmholtz instabilities within the rim seal gap are observed, acting as driving mechanisms for large-scale structures at 98% rotor speed. Incorporating wheel-space cavities in the LISA 1-stage model significantly alters flow phenomena and turbine efficiency. Rotor-stator interaction at specific times can complicate wheel space sealing, contrary to bladeless model predictions. Furthermore, an increase in rim seal flow is associated with reduced turbine isentropic efficiency.
- 29 October 2025
- Published by Springer Nature
- p. 445-452
Aerodynamic Characteristic of an Electric Ducted Propulsion Fan with Duct Nozzle Shape Modifications
- 29 October 2025
- Published by Springer Nature
- p. 445-452
Aerodynamic Characteristic of an Electric Ducted Propulsion Fan with Duct Nozzle Shape Modifications
- 3 August 2025
- Published by Springer Nature
- p. 431-438
Aerodynamic Characteristics of an Electric Propulsion Ducted Fan with a Rotor Shroud Air Bleeding Channel
- 3 August 2025
- Published by Springer Nature
- p. 431-438
Aerodynamic Characteristics of an Electric Propulsion Ducted Fan with a Rotor Shroud Air Bleeding Channel
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Numerical investigation on heat transfer characteristics of internal cooling channels with perforated pin-fins in gas turbine blade
In aeronautical jet engines, internal cooling is commonly employed to keep the blade surface temperature below the material's thermal limit to ensure the structural integrity and performance of turbine blades. This study aims to evaluate the heat transfer characteristics of internal cooling channel in gas turbine blades with perforated pin-fins compared to regular pin-fins (without perforated pin-fins) configurations using the Reynolds averaged Navier–Stokes equations with the k–ω turbulence model. The numerical results demonstrated that perforated pin-fins configurations increase the averaged Nusselt numbers (Nu¯) and heat transfer efficiency index = η and reduce friction factor (f) compared to the regular pin-fins. The cooling flow through the perforated pin-fins creates the jet-like flow, breaking the wake vortices behind the pin-fins near the heated endwalls surface and creating a high heat transfer zone. With the Reynolds numbers from 14 000 to 36 000, the numerical results of the perforated pin-fins (reference case) show an increase in Nu¯ and η by 61.28%–69.89% and 69.97%–80.19%, respectively, while f decreased by 14.56%–16.18% compared to the regular pin-fins. With perforated expansion at Re = 21,500, the heat transfer performance could be improved by up to 77.18% and the friction factor (f) was considerably reduced as low as 19.42% at WP/D = 0.8. This study provides valuable insights into the potential improvements in thermal performance achievable through perforated pin-fin configurations in gas turbine blade cooling channels.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Numerical investigation on heat transfer characteristics of internal cooling channels with perforated pin-fins in gas turbine blade
In aeronautical jet engines, internal cooling is commonly employed to keep the blade surface temperature below the material's thermal limit to ensure the structural integrity and performance of turbine blades. This study aims to evaluate the heat transfer characteristics of internal cooling channel in gas turbine blades with perforated pin-fins compared to regular pin-fins (without perforated pin-fins) configurations using the Reynolds averaged Navier–Stokes equations with the k–ω turbulence model. The numerical results demonstrated that perforated pin-fins configurations increase the averaged Nusselt numbers (Nu¯) and heat transfer efficiency index = η and reduce friction factor (f) compared to the regular pin-fins. The cooling flow through the perforated pin-fins creates the jet-like flow, breaking the wake vortices behind the pin-fins near the heated endwalls surface and creating a high heat transfer zone. With the Reynolds numbers from 14 000 to 36 000, the numerical results of the perforated pin-fins (reference case) show an increase in Nu¯ and η by 61.28%–69.89% and 69.97%–80.19%, respectively, while f decreased by 14.56%–16.18% compared to the regular pin-fins. With perforated expansion at Re = 21,500, the heat transfer performance could be improved by up to 77.18% and the friction factor (f) was considerably reduced as low as 19.42% at WP/D = 0.8. This study provides valuable insights into the potential improvements in thermal performance achievable through perforated pin-fin configurations in gas turbine blade cooling channels.
- Open Access
Static Aero-Propulsion Experiment of an Electric Ducted Fan
Electric ducted fans are gaining prominence in aviation due to their compact size, low noise, and zero emissions compared to conventional gas turbines. This study presents an experimental test system for a 390 mm electric Ducted Propulsion Fan developed by the Aerospace Propulsion Systems group at Hanoi University of Science and Technology. The carbon fiber composite thruster, driven by a centrally located BLDC motor, was mounted on a test stand equipped with force and rotational speed (rpm) sensors. Power was supplied through two battery configurations, eight-pack and nine-pack, with voltage and current monitored and controlled via an ESC module. Experiments conducted from 2000 to 7000 rpm explored the relationship between electrical inputs and aero-propulsive outputs. The results revealed that input power, current, and sound pressure level (SPL) amplified meaningfully with rpm, while the voltage slightly declined. The maximum rpm reached 6500 rpm for the eight-pack and 7000 rpm for the nine-pack configurations. When greater than 6000 rpm, the SPL reaches close to 120 dB. The eight-pack configuration provided higher thrust per volt, whereas the nine-pack offered better thrust per ampere and improved starting power. Although dimensionless indices, including power coefficient (CP), thrust coefficient (CT), and figure of merit (FM), reduced with rpm, the FM remained between 0.7 and 0.75 at medium speeds, demonstrating effective energy conversion.
Open AccessStatic Aero-Propulsion Experiment of an Electric Ducted Fan
Electric ducted fans are gaining prominence in aviation due to their compact size, low noise, and zero emissions compared to conventional gas turbines. This study presents an experimental test system for a 390 mm electric Ducted Propulsion Fan developed by the Aerospace Propulsion Systems group at Hanoi University of Science and Technology. The carbon fiber composite thruster, driven by a centrally located BLDC motor, was mounted on a test stand equipped with force and rotational speed (rpm) sensors. Power was supplied through two battery configurations, eight-pack and nine-pack, with voltage and current monitored and controlled via an ESC module. Experiments conducted from 2000 to 7000 rpm explored the relationship between electrical inputs and aero-propulsive outputs. The results revealed that input power, current, and sound pressure level (SPL) amplified meaningfully with rpm, while the voltage slightly declined. The maximum rpm reached 6500 rpm for the eight-pack and 7000 rpm for the nine-pack configurations. When greater than 6000 rpm, the SPL reaches close to 120 dB. The eight-pack configuration provided higher thrust per volt, whereas the nine-pack offered better thrust per ampere and improved starting power. Although dimensionless indices, including power coefficient (CP), thrust coefficient (CT), and figure of merit (FM), reduced with rpm, the FM remained between 0.7 and 0.75 at medium speeds, demonstrating effective energy conversion.