Saeed Safa
Research Subjects
Saeed Safa has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Mahboubeh Rabbani
Department of Chemistry, Iran University of Science and Technology
2 shared publications R. Azimirad
Malek-Ashtar University of Technology
2 shared publications- Rouhollah Azimirad
Malek-Ashtar University of Technology, Tehran, Iran
2 shared publications A. H. Noroozi
Islamic Azad University
1 shared publication- Amir Hossein Bayani
Institute of Nanoscience and Nanotechnology, University of Kashan, Kashan, Iran
1 shared publication Elham Hasani
Dental Research Center, Dental School, Research Institute of Dental Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran
1 shared publication
Latest Publications
- 1 September 2018
- Published by Springer Nature in Applied Physics A
- Vol. 124 (9) , 652
Investigating NiO nanostructures in ethanol vapor sensing by changing the morphology
- 1 September 2018
- Published by Springer Nature in Applied Physics A
- Vol. 124 (9) , 652
Investigating NiO nanostructures in ethanol vapor sensing by changing the morphology
- Open Access
- 1 January 2018
- Published by Medknow in Journal of Conservative Dentistry
- Vol. 21 (2) , 130-135
Effect of incorporation of zinc oxide nanoparticles on mechanical properties of conventional glass ionomer cements
Aim: The aim of this study is to investigate the physical properties of conventional and resin-modified glass ionomer cements (GICs) compared to GICs supplemented with zinc oxide (ZnO) nanofiller particles at 5% (w/w). Methods: In this in vitro study, ZnO nanoparticles of different morphologies (nanospherical, nanorod, and nanoflower) were incorporated to glass ionomer powder. The samples were subjected to the flexural strength (n = 20) and surface hardness test (n = 12) using a universal testing machine and a Vickers hardness machine, respectively. Surface analysis and crystal structure of samples were performed with scanning electron microscope and X-radiation diffraction, respectively. The data were analyzed using one-way ANOVA, Shapiro–Wilk, and Tukey's tests (P < 0.05). Results: Flexural strength of glass ionomer containing nanoparticles was not significantly different from the control group (P > 0.05). The surface hardness of the glass ionomer containing nanospherical or nanoflower ZnO was significantly lower than the control group (P < 0.05). However, the surface hardness of glass ionomer containing nanorod ZnO was not significantly different from the control group (P = 0.868). Conclusions: Incorporation of nanospherical and nanoflower ZnO to glass ionomer decreased their surface hardness, without any changes on their flexural strength. Incorporation of nanorod ZnO particles caused no effect on the mechanical properties.
- 1 January 2018
- Published by Medknow in Journal of Conservative Dentistry
- Vol. 21 (2) , 130-135
Open AccessEffect of incorporation of zinc oxide nanoparticles on mechanical properties of conventional glass ionomer cements
Aim: The aim of this study is to investigate the physical properties of conventional and resin-modified glass ionomer cements (GICs) compared to GICs supplemented with zinc oxide (ZnO) nanofiller particles at 5% (w/w). Methods: In this in vitro study, ZnO nanoparticles of different morphologies (nanospherical, nanorod, and nanoflower) were incorporated to glass ionomer powder. The samples were subjected to the flexural strength (n = 20) and surface hardness test (n = 12) using a universal testing machine and a Vickers hardness machine, respectively. Surface analysis and crystal structure of samples were performed with scanning electron microscope and X-radiation diffraction, respectively. The data were analyzed using one-way ANOVA, Shapiro–Wilk, and Tukey's tests (P < 0.05). Results: Flexural strength of glass ionomer containing nanoparticles was not significantly different from the control group (P > 0.05). The surface hardness of the glass ionomer containing nanospherical or nanoflower ZnO was significantly lower than the control group (P < 0.05). However, the surface hardness of glass ionomer containing nanorod ZnO was not significantly different from the control group (P = 0.868). Conclusions: Incorporation of nanospherical and nanoflower ZnO to glass ionomer decreased their surface hardness, without any changes on their flexural strength. Incorporation of nanorod ZnO particles caused no effect on the mechanical properties.
- Open Access
- 1 October 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (46) , 21982-21989
Hydrothermal synthesis of NiO nanostructures for photodegradation of 4-nitrophenol
The NiO nanoparticles, nanorods, and nanoworms were synthesized by a hydrothermal reaction of NiCl2 with NaC2O4, as a precipitation agent, and H2O in the presence of ethylene glycol at different temperatures (100, 140, 180, and 220°C) for 12 h. It was observed that by changing the hydrothermal temperature, one can effectively control the size and morphology of NiO nanostructures. The nanostructures were characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, and diffuse reflectance spectroscopy. Photocatalytic activity of nanostructures against 4-nitrophenol was investigated under ultraviolet and visible light irradiation. The results indicated that photocatalytic activity of NiO nanoworms synthesized at 220°C was higher than that of the other prepared NiO nanostructures.
- 1 October 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (46) , 21982-21989
Open AccessHydrothermal synthesis of NiO nanostructures for photodegradation of 4-nitrophenol
The NiO nanoparticles, nanorods, and nanoworms were synthesized by a hydrothermal reaction of NiCl2 with NaC2O4, as a precipitation agent, and H2O in the presence of ethylene glycol at different temperatures (100, 140, 180, and 220°C) for 12 h. It was observed that by changing the hydrothermal temperature, one can effectively control the size and morphology of NiO nanostructures. The nanostructures were characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, and diffuse reflectance spectroscopy. Photocatalytic activity of nanostructures against 4-nitrophenol was investigated under ultraviolet and visible light irradiation. The results indicated that photocatalytic activity of NiO nanoworms synthesized at 220°C was higher than that of the other prepared NiO nanostructures.
- 6 September 2016
- Published by Springer Nature in Pramana
- Vol. 87 (4) , 46
The effect of concentration of H 2 physisorption on the current–voltage characteristic of armchair BN nanotubes in CNT–BNNT–CNT set
- 6 September 2016
- Published by Springer Nature in Pramana
- Vol. 87 (4) , 46
The effect of concentration of H 2 physisorption on the current–voltage characteristic of armchair BN nanotubes in CNT–BNNT–CNT set
- Open Access
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (15) , 6723-6731
Investigating on photocatalytic performance of CuO micro and nanostructures prepared by different precursors
In this paper, various morphologies of copper oxide (CuO) were synthesized from acetate, sulfate, and nitrate precursors using hydrothermal bath method. The photoluminescence spectra revealed that CuO-Ni sample contains the strongest surface defect peak which can be related to its highest active surface area. The Fourier transform infrared (FT-IR) results showed that the concentration of the surface OH− group on the samples varies considerably according to CuO-Ac > CuO-Ni > CuO-Su. From structural results, it could be observed that all the samples crystallized into a monoclinic crystal structure. The photocatalytic activity of CuO samples was evaluated by the catalytic oxidation of methylene blue in the presence of hydrogen peroxide. Concerning the nearly same optical band gap for the samples, the best photocatalytic performance of CuO-Ni nanorods was assigned to its highest active surface area and surface hydroxyl groups.
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (15) , 6723-6731
Open AccessInvestigating on photocatalytic performance of CuO micro and nanostructures prepared by different precursors
In this paper, various morphologies of copper oxide (CuO) were synthesized from acetate, sulfate, and nitrate precursors using hydrothermal bath method. The photoluminescence spectra revealed that CuO-Ni sample contains the strongest surface defect peak which can be related to its highest active surface area. The Fourier transform infrared (FT-IR) results showed that the concentration of the surface OH− group on the samples varies considerably according to CuO-Ac > CuO-Ni > CuO-Su. From structural results, it could be observed that all the samples crystallized into a monoclinic crystal structure. The photocatalytic activity of CuO samples was evaluated by the catalytic oxidation of methylene blue in the presence of hydrogen peroxide. Concerning the nearly same optical band gap for the samples, the best photocatalytic performance of CuO-Ni nanorods was assigned to its highest active surface area and surface hydroxyl groups.
- 29 November 2012
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 38 (1) , 187-194
Microstructure and Hydrogen Storage Properties of LaNi5-Multi Wall Carbon Nanotubes (MWCNTs) Composite
- 29 November 2012
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 38 (1) , 187-194
Microstructure and Hydrogen Storage Properties of LaNi5-Multi Wall Carbon Nanotubes (MWCNTs) Composite