Ying-Ying Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ying-Ying Liu has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Jian-Fang Ma
Northeast Normal University
31 shared publications Jin Yang
Northeast Normal Univ, Dept Chem, Key Lab Polyoxometalate Sci, Changchun 130024, Jilin, Peoples R China
11 shared publicationsPeng Du
College of Chemistry and Chemical Engineering, Dezhou University, Dezhou 253023, China
7 shared publicationsHong-Mei Zhang
Key Lab of Polyoxometalate Science, Department of Chemistry, Northeast Normal University, Changchun 130024, People's Republic of China
5 shared publicationsYuan-Chun He
Key Lab of Polyoxometalate Science, Department of Chemistry, Northeast Normal University, Changchun 130024, P. R. China
5 shared publications- Guo-Hai Xu
Key Laboratory of Jiangxi University for Functional Materials Chemistry, School of Chemistry and Chemical Engineering, Gannan Normal University, Ganzhou, China
4 shared publications
Latest Publications
- Open Access
- 24 January 2025
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (6) , 878
Correction: Multinuclear coordination polymers based on Ag⋯Ag interaction: syntheses, structures, and luminescence properties
Correction for ‘Multinuclear coordination polymers based on Ag⋯Ag interaction: syntheses, structures, and luminescence properties’ by Hua-Yu Shi et al., CrystEngComm, 2014, 16, 5110–5120, https://doi.org/10.1039/C4CE00236A.
- 24 January 2025
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 27 (6) , 878
Open AccessCorrection: Multinuclear coordination polymers based on Ag⋯Ag interaction: syntheses, structures, and luminescence properties
Correction for ‘Multinuclear coordination polymers based on Ag⋯Ag interaction: syntheses, structures, and luminescence properties’ by Hua-Yu Shi et al., CrystEngComm, 2014, 16, 5110–5120, https://doi.org/10.1039/C4CE00236A.
- 30 April 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (10) , 7329-7336
Three Resorcin[4]arene-Based Two-Dimensional Zn(II) Supramolecular Isomers Synthesized via a Structure-Directing Strategy for Knoevenagel Condensation
Herein, in the presence of three structure-directing agents (SDAs), a family of imidazole-functionalized resorcin[4]arene-based coordination polymers (CPs), [Zn(TIC4R)(HCOO)]·HCOO·0.5DMF·1.5H2O (1), [Zn(TIC4R)(CN)]·HCOO·DMF·2.5H2O (2), and [Zn(TIC4R)(H2O)]·2HCOO·2H2O (3), were assembled under solvothermal conditions [TIC4R = tetra(imidazole) resorcin[4]arene]. 1 exhibits a double-layer structure with rectangle windows, and 2 and 3 display monolayer structures. The layers of CPs 2 and 3 are slides with different offsets along the a-axis. In addition, three CPs were used as catalysts to catalyze Knoevenagel condensations. Strikingly, all CPs exhibit remarkable catalytic performance for several substrates. To the best of our knowledge, this is the first time that a small organic acid as SDA was used in the syntheses of resorcin[4]arene-based supramolecular isomers.
- 30 April 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (10) , 7329-7336
Three Resorcin[4]arene-Based Two-Dimensional Zn(II) Supramolecular Isomers Synthesized via a Structure-Directing Strategy for Knoevenagel Condensation
Herein, in the presence of three structure-directing agents (SDAs), a family of imidazole-functionalized resorcin[4]arene-based coordination polymers (CPs), [Zn(TIC4R)(HCOO)]·HCOO·0.5DMF·1.5H2O (1), [Zn(TIC4R)(CN)]·HCOO·DMF·2.5H2O (2), and [Zn(TIC4R)(H2O)]·2HCOO·2H2O (3), were assembled under solvothermal conditions [TIC4R = tetra(imidazole) resorcin[4]arene]. 1 exhibits a double-layer structure with rectangle windows, and 2 and 3 display monolayer structures. The layers of CPs 2 and 3 are slides with different offsets along the a-axis. In addition, three CPs were used as catalysts to catalyze Knoevenagel condensations. Strikingly, all CPs exhibit remarkable catalytic performance for several substrates. To the best of our knowledge, this is the first time that a small organic acid as SDA was used in the syntheses of resorcin[4]arene-based supramolecular isomers.
- 14 January 2021
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (6) , 3181-3187
Functionalized resorcin[4]arene-based coordination polymers as heterogeneous catalysts for click reactions
Three distinctive coordination polymers [Cu2L2]·0.5CH3OH·1.5H2O·2CN (1), [CdCl2L]·5DMF·2CH3OH·2H2O (2) and [Cd2L(bdc)2(DMF)]·2DMF·3CH3OH·H2O (3) were solvothermally synthesized using a resorcin[4]arene ligand (H2bdc = p-phthalic acid and L = tetrakis(4-mercaptopyridine-ylmethyl)resorcin[4]arene). Among them, 1 exhibits a 3D structure, but 2 and 3 are both charming layers. 1 exhibits efficient and selective catalytic performance for azide–alkyne cycloaddition reactions owing to its rich Lewis acid sites. Remarkably, as a heterogeneous catalyst, 1 could be recycled with preservation of the catalytic capability and structural integrity.
- 14 January 2021
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (6) , 3181-3187
Functionalized resorcin[4]arene-based coordination polymers as heterogeneous catalysts for click reactions
Three distinctive coordination polymers [Cu2L2]·0.5CH3OH·1.5H2O·2CN (1), [CdCl2L]·5DMF·2CH3OH·2H2O (2) and [Cd2L(bdc)2(DMF)]·2DMF·3CH3OH·H2O (3) were solvothermally synthesized using a resorcin[4]arene ligand (H2bdc = p-phthalic acid and L = tetrakis(4-mercaptopyridine-ylmethyl)resorcin[4]arene). Among them, 1 exhibits a 3D structure, but 2 and 3 are both charming layers. 1 exhibits efficient and selective catalytic performance for azide–alkyne cycloaddition reactions owing to its rich Lewis acid sites. Remarkably, as a heterogeneous catalyst, 1 could be recycled with preservation of the catalytic capability and structural integrity.
- 6 January 2021
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 35 (4)
Resorcin[4]arene‐based Cu(I) binuclear and mononuclear complexes as efficient catalysts for azide‐alkyne cycloaddition reactions
In this study, three fascinating resorcin[4]arene‐based Cu(I) complexes, named [CuCl (TPC4R)] (1), [CuBr (TPC4R)] (2), and [Cu2I2(TPC4R)] (3) were prepared by using a pyrimidine‐functionalized resorcin[4]arene ligand (TPC4R). In1and2, two Cu(I) ions were linked by two TPC4R and two Cl−(or Br−) anions to form binuclear units. The adjacent units were extended into supramolecular layers through H bonds. In3, two Cu(I) ions were connected by one TPC4R and two I−anions to form a mononuclear complex. The mononuclear units were connected by hydrogen bonds to produce a supramolecular chain. Significantly,1and2exhibit high efficiency and universality for azide‐alkyne cycloaddition reactions in the synthesis 1,2,3‐triazoles andβ‐OH‐1,2,3‐triazoles. It has been found that the amount of catalyst, solvent type and reaction temperature have considerable influences on the activities of catalytic systems. The conversions of catalysts1and2could reach 99% for most of the selected substrates. It was found that after repeatedly used for 4 times, the catalytic activity of1did not decrease apparently.
- 6 January 2021
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 35 (4)
Resorcin[4]arene‐based Cu(I) binuclear and mononuclear complexes as efficient catalysts for azide‐alkyne cycloaddition reactions
In this study, three fascinating resorcin[4]arene‐based Cu(I) complexes, named [CuCl (TPC4R)] (1), [CuBr (TPC4R)] (2), and [Cu2I2(TPC4R)] (3) were prepared by using a pyrimidine‐functionalized resorcin[4]arene ligand (TPC4R). In1and2, two Cu(I) ions were linked by two TPC4R and two Cl−(or Br−) anions to form binuclear units. The adjacent units were extended into supramolecular layers through H bonds. In3, two Cu(I) ions were connected by one TPC4R and two I−anions to form a mononuclear complex. The mononuclear units were connected by hydrogen bonds to produce a supramolecular chain. Significantly,1and2exhibit high efficiency and universality for azide‐alkyne cycloaddition reactions in the synthesis 1,2,3‐triazoles andβ‐OH‐1,2,3‐triazoles. It has been found that the amount of catalyst, solvent type and reaction temperature have considerable influences on the activities of catalytic systems. The conversions of catalysts1and2could reach 99% for most of the selected substrates. It was found that after repeatedly used for 4 times, the catalytic activity of1did not decrease apparently.
- 29 December 2020
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (2) , 1019-1027
Polyoxometalate-Based Organic–Inorganic Hybrids as Heterogeneous Catalysts for Cycloaddition of CO2 with Epoxides and Oxidative Desulfurization Reactions
- 29 December 2020
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (2) , 1019-1027
Polyoxometalate-Based Organic–Inorganic Hybrids as Heterogeneous Catalysts for Cycloaddition of CO2 with Epoxides and Oxidative Desulfurization Reactions
- 23 December 2020
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (4) , 1349-1356
Assembly of polyoxometalate-thiacalix[4]arene-based inorganic–organic hybrids as efficient catalytic oxidation desulfurization catalysts
Self-assembly of polyoxometalates, Ni(II)/Ag(I) cations and tetra-[5-(mercapto)-1-methyltetrazole]-thiacalix[4]arene (L) yielded three inorganic–organic hybrids, namely, [Ni3L2(CH3OH)6(H2O)4][PMo12O40]2·3CH3OH·2H2O (1), [Ni3L2(CH3OH)6(H2O)4][PW12O40]2·3CH3OH·2H2O (2) and [Ag3L(PMo12O40)] (3). In hybrids (1) and (2), Ni(II) cations are linked by L ligands to produce layered frameworks, and H bonds among the [PMo12O40]3−/[PW12O40]3− anions and L ligands lengthen the structures to form 3D supramolecular architectures. Hybrid (3) exhibits a 3D architecture, of which Ag(I) cations not only coordinated with the N and O atoms of L ligands and [PMo12O40]3− anions simultaneously, but also connected each other by Ag–Ag interactions. It is worth mentioning that 1 and 3 as recyclable catalysts show excellent heterogeneous catalytic activity in oxidation desulfurization reactions.
- 23 December 2020
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (4) , 1349-1356
Assembly of polyoxometalate-thiacalix[4]arene-based inorganic–organic hybrids as efficient catalytic oxidation desulfurization catalysts
Self-assembly of polyoxometalates, Ni(II)/Ag(I) cations and tetra-[5-(mercapto)-1-methyltetrazole]-thiacalix[4]arene (L) yielded three inorganic–organic hybrids, namely, [Ni3L2(CH3OH)6(H2O)4][PMo12O40]2·3CH3OH·2H2O (1), [Ni3L2(CH3OH)6(H2O)4][PW12O40]2·3CH3OH·2H2O (2) and [Ag3L(PMo12O40)] (3). In hybrids (1) and (2), Ni(II) cations are linked by L ligands to produce layered frameworks, and H bonds among the [PMo12O40]3−/[PW12O40]3− anions and L ligands lengthen the structures to form 3D supramolecular architectures. Hybrid (3) exhibits a 3D architecture, of which Ag(I) cations not only coordinated with the N and O atoms of L ligands and [PMo12O40]3− anions simultaneously, but also connected each other by Ag–Ag interactions. It is worth mentioning that 1 and 3 as recyclable catalysts show excellent heterogeneous catalytic activity in oxidation desulfurization reactions.
- Open Access
- 1 January 2020
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 69 (16) , 168101-168101-7
Preparation and characteristics of ultra-wide Ga2O3 nanoribbons up to millimeter-long level without catalyst
氧化镓(Ga2O3)单晶纳米带由于具有独特的性质在电子器件中具有潜在的应用, 然而目前过小的接触面积使得基于这种纳米材料的器件制备变得非常复杂且充满挑战. 本文利用碳热还原法, 在无催化剂条件下使氧化镓粉末与碳纳米管在高温下反应, 生长出不同结构的氧化镓纳米材料, 发现了反应温度影响纳米结构的直径和比例的物理机制, 并制备出了长达毫米级的超宽β-Ga2O3单晶纳米带, 其横向尺寸可达44.3 μm. 利用透射电子显微镜(TEM)可以观察到纳米带呈单晶结构, 进一步拉曼散射光谱(Raman)表明这种方法生长的β-Ga2O3纳米带的应变较小, 缺陷密度较低, 且室温光致发光谱(PL)显示该氧化镓纳米带在激发波长295 nm下发出425 nm的稳定且高亮度的蓝光. 这种生长方法可为未来器件级氧化镓纳米带制备提供有益的参考.
- 1 January 2020
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 69 (16) , 168101-168101-7
Open AccessPreparation and characteristics of ultra-wide Ga2O3 nanoribbons up to millimeter-long level without catalyst
氧化镓(Ga2O3)单晶纳米带由于具有独特的性质在电子器件中具有潜在的应用, 然而目前过小的接触面积使得基于这种纳米材料的器件制备变得非常复杂且充满挑战. 本文利用碳热还原法, 在无催化剂条件下使氧化镓粉末与碳纳米管在高温下反应, 生长出不同结构的氧化镓纳米材料, 发现了反应温度影响纳米结构的直径和比例的物理机制, 并制备出了长达毫米级的超宽β-Ga2O3单晶纳米带, 其横向尺寸可达44.3 μm. 利用透射电子显微镜(TEM)可以观察到纳米带呈单晶结构, 进一步拉曼散射光谱(Raman)表明这种方法生长的β-Ga2O3纳米带的应变较小, 缺陷密度较低, 且室温光致发光谱(PL)显示该氧化镓纳米带在激发波长295 nm下发出425 nm的稳定且高亮度的蓝光. 这种生长方法可为未来器件级氧化镓纳米带制备提供有益的参考.
- 27 September 2019
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 49 (12) , 3715-3722
Three thiacalix[4]arene-based Cu(i) coordination polymers: catalytic activities for azide–alkyne cycloaddition reactions and luminescence properties
Three new coordination polymers, [Cu2(CN)(L)(OCH3)]·CH3OH·3H2O (1), [Cu3(Br)3(L)] (2) and [Cu(I)(L)]·1.5H2O (3), have been solvothermally prepared by reacting L (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[(3-pyridylmethyl)oxy]-2,8,14,20-tetrathiacalix[4]arene) with Cu(I) halide. 1 and 2 exhibit layers. 3 displays a chain, a supramolecular layer constructed by hydrogen bonds. The performance of 1–3 was examined as heterogeneous catalysts for azide–alkyne cycloaddition reactions. Most strikingly, 1 and 2 show predominant efficiency with high regioselectivity and excellent recyclability. Remarkably, solids 1–3 all have luminescence characteristics under irradiation with a UV lamp.
- 27 September 2019
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 49 (12) , 3715-3722
Three thiacalix[4]arene-based Cu(i) coordination polymers: catalytic activities for azide–alkyne cycloaddition reactions and luminescence properties
Three new coordination polymers, [Cu2(CN)(L)(OCH3)]·CH3OH·3H2O (1), [Cu3(Br)3(L)] (2) and [Cu(I)(L)]·1.5H2O (3), have been solvothermally prepared by reacting L (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[(3-pyridylmethyl)oxy]-2,8,14,20-tetrathiacalix[4]arene) with Cu(I) halide. 1 and 2 exhibit layers. 3 displays a chain, a supramolecular layer constructed by hydrogen bonds. The performance of 1–3 was examined as heterogeneous catalysts for azide–alkyne cycloaddition reactions. Most strikingly, 1 and 2 show predominant efficiency with high regioselectivity and excellent recyclability. Remarkably, solids 1–3 all have luminescence characteristics under irradiation with a UV lamp.
- 25 September 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (40) , 15871-15878
Calix[4]arene-based polyoxometalate organic–inorganic hybrid and coordination polymer as heterogeneous catalysts for azide–alkyne cycloaddition and Knoevenagel condensation reaction
Based on a neutral pyridyl-functional calix[4]arene ligand (L = tetrakis [(3-pyridylmethyl)oxy]-p-tertbutylcalix[4]arene), one polyoxometalate-based organic–inorganic hybrid [Cu2L(SiW12O40)0.5]·CH3CN·2H2O (1) and one coordination polymer [CdCl2L]·CH3CN (2) have been successfully synthesized under solvothermal conditions. 1 exhibits a distinctive layer attributed to the weak interactions among the positive Cu(I)–L chains and [SiW12O40]4 anions. 2 displays a chain model containing a Cd(II) dimer. Both 1 and 2 were investigated as heterogeneous catalysts. 1 is an excellent heterogeneous catalyst for the azide–alkyne cycloaddition (AAC) reaction and 2 exhibits highly efficient catalytic performance for the Knoevenagel condensation reaction. Both 1 and 2 were easily separated.
- 25 September 2019
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 43 (40) , 15871-15878
Calix[4]arene-based polyoxometalate organic–inorganic hybrid and coordination polymer as heterogeneous catalysts for azide–alkyne cycloaddition and Knoevenagel condensation reaction
Based on a neutral pyridyl-functional calix[4]arene ligand (L = tetrakis [(3-pyridylmethyl)oxy]-p-tertbutylcalix[4]arene), one polyoxometalate-based organic–inorganic hybrid [Cu2L(SiW12O40)0.5]·CH3CN·2H2O (1) and one coordination polymer [CdCl2L]·CH3CN (2) have been successfully synthesized under solvothermal conditions. 1 exhibits a distinctive layer attributed to the weak interactions among the positive Cu(I)–L chains and [SiW12O40]4 anions. 2 displays a chain model containing a Cd(II) dimer. Both 1 and 2 were investigated as heterogeneous catalysts. 1 is an excellent heterogeneous catalyst for the azide–alkyne cycloaddition (AAC) reaction and 2 exhibits highly efficient catalytic performance for the Knoevenagel condensation reaction. Both 1 and 2 were easily separated.