Yinyan Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yinyan Shi has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Xiaochan Wang
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
4 shared publications - Adnan Abbas
School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, China
2 shared publications - Guoxiang Sun
College of Engineering, Nanjing Agricultural University, Nanjing 210095, China
2 shared publications - Qiang Chen
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
2 shared publications - Qishuo Ding
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
2 shared publications - Sijun Yang
Institute of Agricultural Resources and Environment, Jiangsu Academy of Agricultural Sciences/Key Laboratory of Agricultural Environment in Lower Reaches of the Yangtze River, Ministry of Agriculture, Nanjing 210014, China
2 shared publications
Latest Publications
- Open Access
A Novel Approach for Asparagus Comprehensive Classification Based on TOPSIS Evaluation and SVM Prediction
As a common vegetable variety, asparagus is rich in B vitamins, vitamin A, and trace elements such as folate, selenium, iron, manganese, and zinc. With the increasing market demand, China has become the world’s largest cultivated area for asparagus production and product exportation. However, traditional asparagus grading mostly relies on manual visual judgment and needs a lot of manpower input to carry out the classification operation, which cannot meet the needs of large-scale production. To address the high labor cost and labor-intensive production process resulting from the large amount of manpower input and low accuracy of existing asparagus grading devices, this study proposed an improved asparagus grading system and method based on TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) objective evaluation and SVM (support vector machine) prediction. The key structure of classification device was analyzed first, the key components were designed, and the structural parameters were determined by theoretical calculation. Through analysis of the factors affecting asparagus quality, three key attributes were determined: length, diameter, and bruises, which were used as reference attributes to conduct experimental analysis. Then, the graded control groups were set up, combining the TOPSIS principle with weighting, and a score for each asparagus sample was determined. These scores were compared with those of a graded control group to derive the grade of each asparagus, and these subsets of the dataset were used as the training set and the test set, excluding the error caused by the subjectivity of the manual judgment. Based on a comparison of the accuracies of different machine learning models, the support vector machine (SVM) was determined to be the most accurate, and four SVM methods were used to evaluate the test set: linear SVM, quadratic SVM, cubic SVM, and medium Gaussian SVM. The test results showed that the grading device was feasible for asparagus. The bruises had a large influence on asparagus quality. The training accuracy of the medium Gaussian SVM method was high (96%), whereas its test accuracy was low (86.67%). The training accuracies and test accuracy of the quadratic and cubic SVM methods were 93.34%. The quadratic SVM and cubic SVM were demonstrated to have better generalization ability than the medium Gaussian SVM method for predicting unknown grades of asparagus and meeting the operational requirements of the asparagus grading.
Open AccessA Novel Approach for Asparagus Comprehensive Classification Based on TOPSIS Evaluation and SVM Prediction
As a common vegetable variety, asparagus is rich in B vitamins, vitamin A, and trace elements such as folate, selenium, iron, manganese, and zinc. With the increasing market demand, China has become the world’s largest cultivated area for asparagus production and product exportation. However, traditional asparagus grading mostly relies on manual visual judgment and needs a lot of manpower input to carry out the classification operation, which cannot meet the needs of large-scale production. To address the high labor cost and labor-intensive production process resulting from the large amount of manpower input and low accuracy of existing asparagus grading devices, this study proposed an improved asparagus grading system and method based on TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution) objective evaluation and SVM (support vector machine) prediction. The key structure of classification device was analyzed first, the key components were designed, and the structural parameters were determined by theoretical calculation. Through analysis of the factors affecting asparagus quality, three key attributes were determined: length, diameter, and bruises, which were used as reference attributes to conduct experimental analysis. Then, the graded control groups were set up, combining the TOPSIS principle with weighting, and a score for each asparagus sample was determined. These scores were compared with those of a graded control group to derive the grade of each asparagus, and these subsets of the dataset were used as the training set and the test set, excluding the error caused by the subjectivity of the manual judgment. Based on a comparison of the accuracies of different machine learning models, the support vector machine (SVM) was determined to be the most accurate, and four SVM methods were used to evaluate the test set: linear SVM, quadratic SVM, cubic SVM, and medium Gaussian SVM. The test results showed that the grading device was feasible for asparagus. The bruises had a large influence on asparagus quality. The training accuracy of the medium Gaussian SVM method was high (96%), whereas its test accuracy was low (86.67%). The training accuracies and test accuracy of the quadratic and cubic SVM methods were 93.34%. The quadratic SVM and cubic SVM were demonstrated to have better generalization ability than the medium Gaussian SVM method for predicting unknown grades of asparagus and meeting the operational requirements of the asparagus grading.
- Open Access
- 28 June 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (7) , 1324
A Multi-Objective Optimization Method for a Tractor Driveline Based on the Diversity Preservation Strategy of Gradient Crowding
This study presents a multi-objective optimization method for a tractor driveline based on the diversity maintenance strategy of gradient crowding. The objective was to address the trade-off between high power and low fuel consumption rates in a tractor driveline by optimizing the distribution of driveline ratios, aiming to enhance overall driving performance and reduce fuel consumption. This method introduces a strategy for evaluating gradient crowding to reduce non-inferior solution sets during selection to ensure the uniform and wide distribution of solutions while maintaining population diversity. The transmission ratio of a tractor is optimized by varying the input of the transmission ratios in each gear, constraining the theoretical tractor driving rate, common transmission ratio, and drive adhesion limit, and introducing the diversity maintenance strategy of gradient crowding. The goal is to reduce the loss rate of driving power and specific fuel consumption as much as possible. The analysis results demonstrate that the GC_NSGA-II algorithm, incorporating the evaluation strategy of gradient crowding, achieves greater diversity and a more uniform distribution in the front end. After verifying the algorithm, the optimized tractor showed a reduction of 41.62 (±S.D. 0.44)% in the theoretical loss rate of driving power and 62.8 (±S.D. 0.56)% in the loss rate of specific fuel consumption, indicating that the tractor’s drive performance significantly improved, accompanied by a substantial reduction in the fuel consumption rate. These findings affirm the feasibility of the proposed optimization method and provide valuable research insights for enhancing the overall performance of tractors.
- 28 June 2023
- Published by MDPI AG in Agriculture
- Vol. 13 (7) , 1324
Open AccessA Multi-Objective Optimization Method for a Tractor Driveline Based on the Diversity Preservation Strategy of Gradient Crowding
This study presents a multi-objective optimization method for a tractor driveline based on the diversity maintenance strategy of gradient crowding. The objective was to address the trade-off between high power and low fuel consumption rates in a tractor driveline by optimizing the distribution of driveline ratios, aiming to enhance overall driving performance and reduce fuel consumption. This method introduces a strategy for evaluating gradient crowding to reduce non-inferior solution sets during selection to ensure the uniform and wide distribution of solutions while maintaining population diversity. The transmission ratio of a tractor is optimized by varying the input of the transmission ratios in each gear, constraining the theoretical tractor driving rate, common transmission ratio, and drive adhesion limit, and introducing the diversity maintenance strategy of gradient crowding. The goal is to reduce the loss rate of driving power and specific fuel consumption as much as possible. The analysis results demonstrate that the GC_NSGA-II algorithm, incorporating the evaluation strategy of gradient crowding, achieves greater diversity and a more uniform distribution in the front end. After verifying the algorithm, the optimized tractor showed a reduction of 41.62 (±S.D. 0.44)% in the theoretical loss rate of driving power and 62.8 (±S.D. 0.56)% in the loss rate of specific fuel consumption, indicating that the tractor’s drive performance significantly improved, accompanied by a substantial reduction in the fuel consumption rate. These findings affirm the feasibility of the proposed optimization method and provide valuable research insights for enhancing the overall performance of tractors.
- Open Access
- 26 April 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (5) , 613
Optimization of Strip Fertilization Planter for Straw Throwing and Paving
To enhance the operation effect and working performance of our previously developed strip fertilization planter for broken straw back throwing and inter-row laying, and to improve the stability of straw crushing and consistency of straw mulching between rows (broken straw inter-row mulching), the key operation parameters of the planter were optimized in this study. On the basis of determining the transmission route and matching power consumption, the discrete element method was used to establish a mechanical model of straw particles using the EDEM software, which was then imported into the rigid–flexible coupled system of the ‘shredded straw-mechanism’. Quadratic regression orthogonal methods and rotation combination experiments were then designed to carry out a DEM virtual simulation and numerical simulation, and the optimal combination of operating parameters affecting planter working performance was obtained, which was also verified by field tests. The simulation test results showed that the smashing spindle speed (A) had the most significant influence on the coefficient of variation (Y1) of straw crushing, followed by the planter working forward speed (C). The conveying impeller speed (B) had the most significant influence on the coefficient of variation (Y2) of inter-row straw mulching, also followed by (C). The optimal combination of operating parameters after optimization were A = 2060.79 rpm, B = 206.25 rpm, and C = 0.95 m·s−1, and the optimal working performance of the planter was obtained as Y1 = 8.51% and Y2 = 10.34%. The evaluation index results corresponding to the field test were Y1 = 9.35% and Y2 = 10.97%, which met the technical requirements of the relevant operation machinery; the relative errors of the simulation test results were 9.87% and 9.63%, respectively, indicating the effectiveness of the virtual numerical simulation and the rationality of the optimized operation parameters. Our results provide a technical reference for realizing high-quality and smooth no-tillage seeding operations.
- 26 April 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (5) , 613
Open AccessOptimization of Strip Fertilization Planter for Straw Throwing and Paving
To enhance the operation effect and working performance of our previously developed strip fertilization planter for broken straw back throwing and inter-row laying, and to improve the stability of straw crushing and consistency of straw mulching between rows (broken straw inter-row mulching), the key operation parameters of the planter were optimized in this study. On the basis of determining the transmission route and matching power consumption, the discrete element method was used to establish a mechanical model of straw particles using the EDEM software, which was then imported into the rigid–flexible coupled system of the ‘shredded straw-mechanism’. Quadratic regression orthogonal methods and rotation combination experiments were then designed to carry out a DEM virtual simulation and numerical simulation, and the optimal combination of operating parameters affecting planter working performance was obtained, which was also verified by field tests. The simulation test results showed that the smashing spindle speed (A) had the most significant influence on the coefficient of variation (Y1) of straw crushing, followed by the planter working forward speed (C). The conveying impeller speed (B) had the most significant influence on the coefficient of variation (Y2) of inter-row straw mulching, also followed by (C). The optimal combination of operating parameters after optimization were A = 2060.79 rpm, B = 206.25 rpm, and C = 0.95 m·s−1, and the optimal working performance of the planter was obtained as Y1 = 8.51% and Y2 = 10.34%. The evaluation index results corresponding to the field test were Y1 = 9.35% and Y2 = 10.97%, which met the technical requirements of the relevant operation machinery; the relative errors of the simulation test results were 9.87% and 9.63%, respectively, indicating the effectiveness of the virtual numerical simulation and the rationality of the optimized operation parameters. Our results provide a technical reference for realizing high-quality and smooth no-tillage seeding operations.
- Open Access
Study of the Mechanics and Micro-Structure of Wheat Straw Returned to Soil in Relation to Different Tillage Methods
A field experiment was conducted to study the effects of different tillage methods, and their interaction on the dynamic changes of straw decomposition rate, mechanical properties, and micro-structure of the stalk. A nylon mesh bag technique was used. An obvious change was observed in the decomposition rate of straw, and its mechanical, and micro-structural properties. The decomposition rate of straw was increased in all tillage treatments. Specifically, it increased consistently in conventional and dry rotary tillage, and sharply in wet rotary tillage. Furthermore, for all tillage, the mechanical properties like shear and bending strengths decreased sharply while compressive strength first decreased linearly and then increased, whereas the micro-structure of wheat straw showed a fluctuating trend, i.e., it changed neither regularly nor consistently over time. Moreover, the micro-structure of the stalk explained the morphological changes to the straw that returned to the field, which may impact the mechanical properties. However, these changes could not explain the degradation trend of straw directly. The findings of the study could be used as a theoretical reference for the design of tillage and harvesting machinery keeping in view soil solidification and compaction dynamics.
Open AccessStudy of the Mechanics and Micro-Structure of Wheat Straw Returned to Soil in Relation to Different Tillage Methods
A field experiment was conducted to study the effects of different tillage methods, and their interaction on the dynamic changes of straw decomposition rate, mechanical properties, and micro-structure of the stalk. A nylon mesh bag technique was used. An obvious change was observed in the decomposition rate of straw, and its mechanical, and micro-structural properties. The decomposition rate of straw was increased in all tillage treatments. Specifically, it increased consistently in conventional and dry rotary tillage, and sharply in wet rotary tillage. Furthermore, for all tillage, the mechanical properties like shear and bending strengths decreased sharply while compressive strength first decreased linearly and then increased, whereas the micro-structure of wheat straw showed a fluctuating trend, i.e., it changed neither regularly nor consistently over time. Moreover, the micro-structure of the stalk explained the morphological changes to the straw that returned to the field, which may impact the mechanical properties. However, these changes could not explain the degradation trend of straw directly. The findings of the study could be used as a theoretical reference for the design of tillage and harvesting machinery keeping in view soil solidification and compaction dynamics.
- Open Access
Nutrient Recycling, Wheat Straw Decomposition, and the Potential Effect of Straw Shear Strength on Soil Mechanical Properties
This study aimed to explore the release rate (RR) of wheat straw nutrients during straw return to a paddy field and examined the possible relationship between wheat stalk shear strength and the content of the remaining components in wheat straw. We used the nylon mesh bag technique to study the decomposition of straw nutrients such as total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP), total potassium (TK), lignin, and cellulose over time. During the time span of 0–90 days, results showed a rapid decomposition rate with a diverse trend under different tillage operations. Furthermore, the decomposition rate was higher under the plough (PRP) conditions than under dry conditions (RP) or water rotation (PR). Moreover, under PRP conditions, the RR of TOC, TK, lignin, and cellulose increased, while the RR of TK was higher than 95% initially and then increased slightly. However, the carbon to nitrogen ratio was first increased and then decreased; similarly the RR of TP first increased and then decreased; a fluctuating pattern was observed for TN. Additionally, we found a strong correlation between wheat stalk shear strength and the remaining contents of lignin, hemicellulose, and cellulose, with R2 ≥ 0.91, which was higher than 0.82 after computing adjustments. Furthermore, the changing trend of nutrients and components and the relationship between shear strength and the content of the remaining components in wheat straw were used to evaluate the release characteristics of nutrients under straw return. The potential effects of the straw shear strength on soil mechanical properties were determined, providing a remarkable opportunity for acquiring nutrients for sustainable application of soil.
Open AccessNutrient Recycling, Wheat Straw Decomposition, and the Potential Effect of Straw Shear Strength on Soil Mechanical Properties
This study aimed to explore the release rate (RR) of wheat straw nutrients during straw return to a paddy field and examined the possible relationship between wheat stalk shear strength and the content of the remaining components in wheat straw. We used the nylon mesh bag technique to study the decomposition of straw nutrients such as total organic carbon (TOC), total nitrogen (TN), total phosphorus (TP), total potassium (TK), lignin, and cellulose over time. During the time span of 0–90 days, results showed a rapid decomposition rate with a diverse trend under different tillage operations. Furthermore, the decomposition rate was higher under the plough (PRP) conditions than under dry conditions (RP) or water rotation (PR). Moreover, under PRP conditions, the RR of TOC, TK, lignin, and cellulose increased, while the RR of TK was higher than 95% initially and then increased slightly. However, the carbon to nitrogen ratio was first increased and then decreased; similarly the RR of TP first increased and then decreased; a fluctuating pattern was observed for TN. Additionally, we found a strong correlation between wheat stalk shear strength and the remaining contents of lignin, hemicellulose, and cellulose, with R2 ≥ 0.91, which was higher than 0.82 after computing adjustments. Furthermore, the changing trend of nutrients and components and the relationship between shear strength and the content of the remaining components in wheat straw were used to evaluate the release characteristics of nutrients under straw return. The potential effects of the straw shear strength on soil mechanical properties were determined, providing a remarkable opportunity for acquiring nutrients for sustainable application of soil.