Jian Hou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jian Hou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Jian’an Wang
China Jikan Research Institute of Engineering Investigations and Design, Co., Ltd., Xi'an, Shaanxi, 710043, PR China
2 shared publications- Bingfeng Liu
Department of Civil Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Chuanzhao Xu
Department of Civil Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Fangchao Lei
China JIKAN Research Institute of Engineering Investigations and Design, Co., Ltd., Xi’an 710043, China
1 shared publication - Jian’an Wang
China JIKAN Research Institute of Engineering Investigations and Design, Co., Ltd., Xi’an 710043, China
1 shared publication - Kaihang Yu
Department of Civil Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- Open Access
Research on Coordinated Relationship Between Deformation and Force in Shaft Foundation Pit Support Structures
In order to investigate the coordinated relationship between lateral deformation of the diaphragm wall and axial force of the internal strut, this paper first carried out a scaled model test on the mechanical features of a foundation pit support system based on a novel axial force servo device. Then, a finite element model was established to simulate the scaled model test, and the correctness of the finite element modeling approach was validated by comparing test results. After that, the same finite element modeling method was used to analyze the coordinated relationship between axial force and lateral deformation in the prototype foundation pit support structure. The results show that the axial force of the inner strut is negatively correlated with the lateral deformation in the diaphragm wall. The initial maximum lateral deformation in the diaphragm wall of the shaft foundation pit occurs at the bottom of the foundation pit, so changing the length of bottom strut simultaneously is the most effective way to adjust the mechanical behavior of the support structure. Under various support conditions, the maximum lateral deformation of the diaphragm wall in the prototype project is 0.59~0.66‰ of the total excavation depth of the foundation pit, and the maximum axial force of internal support is 11~30% of the yield load of a single steel strut.
Open AccessResearch on Coordinated Relationship Between Deformation and Force in Shaft Foundation Pit Support Structures
In order to investigate the coordinated relationship between lateral deformation of the diaphragm wall and axial force of the internal strut, this paper first carried out a scaled model test on the mechanical features of a foundation pit support system based on a novel axial force servo device. Then, a finite element model was established to simulate the scaled model test, and the correctness of the finite element modeling approach was validated by comparing test results. After that, the same finite element modeling method was used to analyze the coordinated relationship between axial force and lateral deformation in the prototype foundation pit support structure. The results show that the axial force of the inner strut is negatively correlated with the lateral deformation in the diaphragm wall. The initial maximum lateral deformation in the diaphragm wall of the shaft foundation pit occurs at the bottom of the foundation pit, so changing the length of bottom strut simultaneously is the most effective way to adjust the mechanical behavior of the support structure. Under various support conditions, the maximum lateral deformation of the diaphragm wall in the prototype project is 0.59~0.66‰ of the total excavation depth of the foundation pit, and the maximum axial force of internal support is 11~30% of the yield load of a single steel strut.
- Open Access
- 21 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (6) , 4003
Calculation Model of Compaction Coefficient of Soil among SP−PSC Pile Group on Collapsible Loess Foundation
Collapsible loess is a kind of soil with special properties, and is widely distributed in China. When it is not wetted by water, its strength is generally high and its compressibility is low. However, when collapsible loess is wetted by water under a certain pressure, the soil structure will be rapidly destroyed, resulting in large additional subsidence. Therefore, when engineering constructions on collapsible loess sites are carried out, appropriate foundation treatment measures must be taken to eliminate foundation collapsibility. Because of their advantages, static pressure plain soil compaction (SP−PSC) piles are widely used for collapsible loess foundation treatments in China. However, at present, there is still a lack of accurate understanding of the distribution of compaction coefficient of soil among SP−PSC pile groups on collapsible loess foundations. The present study systematically investigated the distribution of the soil compaction coefficient among SP−PSC pile groups based on SP−PSC pile group tests and finite element analyses. The effect of different factors on soil compaction coefficient was analyzed and explored, including the pile diameter and length of SP−PSC piles, the soil moisture content, the pile spacing within the SP−PSC pile group, and the depth to ground. Finally, the simplified calculation models of the compaction coefficient of the soil at the center of pile group and at the midpoints of adjacent piles were analytically formulated. These models established a theoretical basis for the design and construction of SP−PSC pile groups on collapsible loess foundations.
- 21 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (6) , 4003
Open AccessCalculation Model of Compaction Coefficient of Soil among SP−PSC Pile Group on Collapsible Loess Foundation
Collapsible loess is a kind of soil with special properties, and is widely distributed in China. When it is not wetted by water, its strength is generally high and its compressibility is low. However, when collapsible loess is wetted by water under a certain pressure, the soil structure will be rapidly destroyed, resulting in large additional subsidence. Therefore, when engineering constructions on collapsible loess sites are carried out, appropriate foundation treatment measures must be taken to eliminate foundation collapsibility. Because of their advantages, static pressure plain soil compaction (SP−PSC) piles are widely used for collapsible loess foundation treatments in China. However, at present, there is still a lack of accurate understanding of the distribution of compaction coefficient of soil among SP−PSC pile groups on collapsible loess foundations. The present study systematically investigated the distribution of the soil compaction coefficient among SP−PSC pile groups based on SP−PSC pile group tests and finite element analyses. The effect of different factors on soil compaction coefficient was analyzed and explored, including the pile diameter and length of SP−PSC piles, the soil moisture content, the pile spacing within the SP−PSC pile group, and the depth to ground. Finally, the simplified calculation models of the compaction coefficient of the soil at the center of pile group and at the midpoints of adjacent piles were analytically formulated. These models established a theoretical basis for the design and construction of SP−PSC pile groups on collapsible loess foundations.
- Open Access
- 8 June 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 267 (5) , 052066
Mechanism of Progressive Collapse Resistance of RC Frames Subjected to a Center Column Loss
Column loss scenarios are often used to investigate progressive collapse resistance of reinforced concrete (RC) buildings. The present study experimentally and computationally investigated the progressive collapse resistance of RC frames subjected to a center column loss. A one-third scale model of a single-story RC frame, which comprises two spans and two bays, was tested and computed. During the experiment and numerical analysis, the vertical displacement on the top of the removed center column was applied until it failed. This study gives insight into the progressive collapse behaviour as well as the failure mode of the RC frame. It has been shown that the catenary action can be activated in the frame beams, and the tensile membrane action can also be mobilized in the frame slabs at large deformations. Based on the experimental and computational results, the mechanism of progressive collapse resistance of RC frames was discussed. At large deformations, a simplified calculation method of progressive collapse resistance of RC frames was also proposed.
- 8 June 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 267 (5) , 052066
Open AccessMechanism of Progressive Collapse Resistance of RC Frames Subjected to a Center Column Loss
Column loss scenarios are often used to investigate progressive collapse resistance of reinforced concrete (RC) buildings. The present study experimentally and computationally investigated the progressive collapse resistance of RC frames subjected to a center column loss. A one-third scale model of a single-story RC frame, which comprises two spans and two bays, was tested and computed. During the experiment and numerical analysis, the vertical displacement on the top of the removed center column was applied until it failed. This study gives insight into the progressive collapse behaviour as well as the failure mode of the RC frame. It has been shown that the catenary action can be activated in the frame beams, and the tensile membrane action can also be mobilized in the frame slabs at large deformations. Based on the experimental and computational results, the mechanism of progressive collapse resistance of RC frames was discussed. At large deformations, a simplified calculation method of progressive collapse resistance of RC frames was also proposed.
- Open Access
- 30 March 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 242 (6) , 062046
Comparison of Progressive Collapse Performance between Center Column Removal and Side Column Removal Scenarios
Center column removal and side column removal scenarios are the two typical research conditions in the investigation of progressive collapse of RC frame structures. The study provides insight into the comparison of progressive collapse performance between center column removal and side column removal scenarios based on experimental results, numerical investigation and theoretical analysis. Based on the difference of progressive collapse failure modes of two frame models, their collapse resistance mechanisms are analyzed, and the different collapse resistance models are proposed. And the comparison between two frame models on the experimental collapse resistances is presented, which is in good agreement with the proposed collapse resistance models. The research results can establish a foundation for progressive collapse analysis and assessment of RC frame structures.
- 30 March 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 242 (6) , 062046
Open AccessComparison of Progressive Collapse Performance between Center Column Removal and Side Column Removal Scenarios
Center column removal and side column removal scenarios are the two typical research conditions in the investigation of progressive collapse of RC frame structures. The study provides insight into the comparison of progressive collapse performance between center column removal and side column removal scenarios based on experimental results, numerical investigation and theoretical analysis. Based on the difference of progressive collapse failure modes of two frame models, their collapse resistance mechanisms are analyzed, and the different collapse resistance models are proposed. And the comparison between two frame models on the experimental collapse resistances is presented, which is in good agreement with the proposed collapse resistance models. The research results can establish a foundation for progressive collapse analysis and assessment of RC frame structures.