Han Zhao
Research Subjects
Han Zhao has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Lihong Han
State Key Laboratory of Oil and Gas Equipment, CNPC Tubular Goods Research Institute, Xi’an, China
2 shared publications - Yisheng Mou
State Key Laboratory of Oil and Gas Equipment, CNPC Tubular Goods Research Institute, Xi’an 710077, China
2 shared publications - Fengqi Wei
China National Petroleum Corporation Exploration and Production Company, Beijing 100007, China
1 shared publication - Fengqi Wei
CNPC Exploration and Production Company, Beijing 100007, China
1 shared publication - Jian Cui
Changqing Branch, China National Petroleum Corporation China National Logging Corporation, Xi’an 710201, China
1 shared publication - Yonggang Xie
CNPC Oil and Gas Technology Research Institute Changqing Oilfield, Xi’an 710021, China
1 shared publication
Latest Publications
- Open Access
Research on Thread Seal Failure Mechanism of Casing Hanger in Shale Gas Wells and Prevention Measures
The strength and sealing failure of the connecting thread of the casing head mandrel hanger causes huge economic losses. One of the major challenges is the thread seal failure mechanism of the casing hanger in the wellhead during pressure testing in shale gas wells. In order to analyze the failure causes of connecting threads and put forward improvement measures, a typical case of a well accompanied by a hanger seal failure is analyzed in this paper, and a series of material tests are carried out. The microstructure and mechanical properties of casing materials and hanger materials could meet the field requirements. It is concluded that both the hanger material and casing material are characterized with significant ductile fracture. A three-dimensional model of the hanger and casing system is established, and the mechanical behavior is calculated for the connecting thread under different working conditions. The results showed that the connection degree of the hanger–casing is insufficient at the torque recommended by the manufacturer because of the difference in wall thickness between the box thread of the hanger and the box thread of the joint according to the connection degree of the coupling casing. It is seen that the high contact pressure ring of zone three on the sealing surface plays an effective sealing role under the manufacturer’s recommended torque (20,465 N·m). Finally, when the torque is increased by 25%, the maximum contact pressure between the pin thread of the casing and the box thread of the hanger can fully meet the internal pressure from the wellbore pressure test and the internal pressure strength required for subsequent operations.
Open AccessResearch on Thread Seal Failure Mechanism of Casing Hanger in Shale Gas Wells and Prevention Measures
The strength and sealing failure of the connecting thread of the casing head mandrel hanger causes huge economic losses. One of the major challenges is the thread seal failure mechanism of the casing hanger in the wellhead during pressure testing in shale gas wells. In order to analyze the failure causes of connecting threads and put forward improvement measures, a typical case of a well accompanied by a hanger seal failure is analyzed in this paper, and a series of material tests are carried out. The microstructure and mechanical properties of casing materials and hanger materials could meet the field requirements. It is concluded that both the hanger material and casing material are characterized with significant ductile fracture. A three-dimensional model of the hanger and casing system is established, and the mechanical behavior is calculated for the connecting thread under different working conditions. The results showed that the connection degree of the hanger–casing is insufficient at the torque recommended by the manufacturer because of the difference in wall thickness between the box thread of the hanger and the box thread of the joint according to the connection degree of the coupling casing. It is seen that the high contact pressure ring of zone three on the sealing surface plays an effective sealing role under the manufacturer’s recommended torque (20,465 N·m). Finally, when the torque is increased by 25%, the maximum contact pressure between the pin thread of the casing and the box thread of the hanger can fully meet the internal pressure from the wellbore pressure test and the internal pressure strength required for subsequent operations.
- Open Access
Failure Analysis of Casing in Shale Oil Wells under Multistage Fracturing Conditions
During the multistage fracturing in shale oil and gas wells with tieback and liner, one of the major challenges is the wellbore temperature variation due to the high-rate fracturing. In such a case, the axial shrinkage trend of the casing string could be caused due to the sudden drop in temperature, but the actual axial length of the casing string would not change due to the cement constraints. Therefore, this could lead to cementation damage between the casing and cement due to excessive load from the casing string. A wellbore seal that is out of control often leads to irreversible consequences, even well abandonment. In order to study the mechanism of casing deformation in shale oil and gas wells with tieback and liner quantitatively, in this paper, take LS1 well (a typical shale oil and gas well with tieback and liner, and casing deformation is caused) for example, the transient changes of temperature and pressure in the whole wellbore during multistage fracturing are studied. Moreover, the cementing strength test of the interface between casing and cement is also tested. Then, the testing results are carried out and extended to model the finite element (FE) model with the whole vertical section casing string with tieback and liner. The model is used to simulate the internal force changes under fracturing conditions with different stages of fracturing. Meanwhile, the casing deformation mechanism in LS1 well is analyzed and studied in detail. Our simulation results indicated the failure process and mechanism of cementation between casing and cement in shale oil and gas wells with tieback and liner. Our work can provide a detailed theoretical reference and a basis for field application.
Open AccessFailure Analysis of Casing in Shale Oil Wells under Multistage Fracturing Conditions
During the multistage fracturing in shale oil and gas wells with tieback and liner, one of the major challenges is the wellbore temperature variation due to the high-rate fracturing. In such a case, the axial shrinkage trend of the casing string could be caused due to the sudden drop in temperature, but the actual axial length of the casing string would not change due to the cement constraints. Therefore, this could lead to cementation damage between the casing and cement due to excessive load from the casing string. A wellbore seal that is out of control often leads to irreversible consequences, even well abandonment. In order to study the mechanism of casing deformation in shale oil and gas wells with tieback and liner quantitatively, in this paper, take LS1 well (a typical shale oil and gas well with tieback and liner, and casing deformation is caused) for example, the transient changes of temperature and pressure in the whole wellbore during multistage fracturing are studied. Moreover, the cementing strength test of the interface between casing and cement is also tested. Then, the testing results are carried out and extended to model the finite element (FE) model with the whole vertical section casing string with tieback and liner. The model is used to simulate the internal force changes under fracturing conditions with different stages of fracturing. Meanwhile, the casing deformation mechanism in LS1 well is analyzed and studied in detail. Our simulation results indicated the failure process and mechanism of cementation between casing and cement in shale oil and gas wells with tieback and liner. Our work can provide a detailed theoretical reference and a basis for field application.