Rafael Macian-Juan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rafael Macian-Juan has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Chunyu Liu
Technical University of Munich (TUM)
3 shared publications - Run Luo
School of Resource & Environment and Safety Engineering, University of South China, Hengyang 421001, China
3 shared publications - Xiaodong Li
Chair of Nuclear Technology, School of Engineering and Design, Technical University of Munich (TUM), Munich, Germany
2 shared publications - Huiming Zhang
Beijing EV Charging and Battery Swapping Engineering Technology Research Center, China Electric Power Research Institute, Beijing 100192, China
1 shared publication - Wenjiang Yang
School of Astronautics, Beihang University, Beijing, China
1 shared publication
Latest Publications
- Open Access
A New Uncertainty-Based Control Scheme of the Small Modular Dual Fluid Reactor and Its Optimization
The small modular dual fluid reactor is a novel variant of the Generation IV molten salt reactor and liquid metal fast reactor. In the primary circuit, molten salt or liquid eutectic metal (U-Pu-Cr) is employed as fuel, and liquid lead works as the coolant in the secondary circuit. To design the control system of such an advanced reactor, the uncertainties of the employed computer model and the physicochemical properties of the materials must be considered. In this paper, a one-dimensional model of a core is established based on the equivalent parameters achieved via the coupled three-dimensional model, taking into account delayed neutron precursor drifting, and a power control system is developed. The performance of the designed controllers is assessed, taking into account the model and property uncertainties. The achieved results show that the designed control system is able to maintain the stability of the system and regulate the power as expected. Among the considered uncertain parameters, the reactivity coefficients of fuel temperature have the largest influence on the performance of the control system. The most optimized configuration of the control system is delivered based on the characteristics of uncertainty propagation by using the particle swarm optimization method.
Open AccessA New Uncertainty-Based Control Scheme of the Small Modular Dual Fluid Reactor and Its Optimization
The small modular dual fluid reactor is a novel variant of the Generation IV molten salt reactor and liquid metal fast reactor. In the primary circuit, molten salt or liquid eutectic metal (U-Pu-Cr) is employed as fuel, and liquid lead works as the coolant in the secondary circuit. To design the control system of such an advanced reactor, the uncertainties of the employed computer model and the physicochemical properties of the materials must be considered. In this paper, a one-dimensional model of a core is established based on the equivalent parameters achieved via the coupled three-dimensional model, taking into account delayed neutron precursor drifting, and a power control system is developed. The performance of the designed controllers is assessed, taking into account the model and property uncertainties. The achieved results show that the designed control system is able to maintain the stability of the system and regulate the power as expected. Among the considered uncertain parameters, the reactivity coefficients of fuel temperature have the largest influence on the performance of the control system. The most optimized configuration of the control system is delivered based on the characteristics of uncertainty propagation by using the particle swarm optimization method.
- Open Access
Investigation of Control Characteristics for a Molten Salt Reactor Plant under Normal and Accident Conditions
A molten salt reactor (MSR) has unique safety and economic advantages due to the liquid fluoride salt adopted as the reactor fuel and heat carrier fluid. The operation scheme and control strategy of the MSR plant are significantly different from those of traditional solid-fuel reactors because of the delayed neutron precursors drift with the liquid-fuel flow. In this paper, a simulation platform of the MSR plant is developed to study the control characteristics under normal and accident conditions. A nonlinear dynamic model of the whole system is built in the platform consisting of a liquid-fuel reactor with a graphite moderator, an intermediate heat exchanger and a steam generator. A new control strategy is presented based on a feed-forward and feedback combined scheme, a power control system and a steam temperature control system are designed to regulate load changes of the plant. Three different types of operation conditions are simulated with the control systems, including transients of normal load-follow operation, a reactivity insertion accident and a loss of flow accident. The simulation results show that the developed control system not only has a fast load-follow capability during normal operation, but also has a good control performance under accident conditions.
Open AccessInvestigation of Control Characteristics for a Molten Salt Reactor Plant under Normal and Accident Conditions
A molten salt reactor (MSR) has unique safety and economic advantages due to the liquid fluoride salt adopted as the reactor fuel and heat carrier fluid. The operation scheme and control strategy of the MSR plant are significantly different from those of traditional solid-fuel reactors because of the delayed neutron precursors drift with the liquid-fuel flow. In this paper, a simulation platform of the MSR plant is developed to study the control characteristics under normal and accident conditions. A nonlinear dynamic model of the whole system is built in the platform consisting of a liquid-fuel reactor with a graphite moderator, an intermediate heat exchanger and a steam generator. A new control strategy is presented based on a feed-forward and feedback combined scheme, a power control system and a steam temperature control system are designed to regulate load changes of the plant. Three different types of operation conditions are simulated with the control systems, including transients of normal load-follow operation, a reactivity insertion accident and a loss of flow accident. The simulation results show that the developed control system not only has a fast load-follow capability during normal operation, but also has a good control performance under accident conditions.
- 9 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
Numerical Study of AC Loss Characteristics in a Three-Phase Superconducting Induction Pump
The superconducting induction pump is a pumping system which moves electro-conductive liquids by using electromagnetism. It has the potential to be applied as the pumping system for submarine propulsion and nuclear fission reactors. Since alternating current may generate more heat in the superconducting winding, it is extremely essential to analyze the AC loss characteristics of the pumping system to avoid quenching phenomenon. In this article, a 2D-axisymmetric model of an annular linear induction pump which is composed of superconducting coils has been established by using T-A formulation. AC loss of superconducting coils under self-field with three-phase alternating current and external alternating magnetic field have been studied. Meanwhile, the influence of some essential parameters such as the transmission current, coil turns have been analyzed as well. Results show that the arrangement position of coils in the pump plays an important role in determining the AC loss of superconducting winding. Meanwhile, self-field of the superconducting coils seems to have larger influence on the AC loss characteristics than external alternating field. In conclusion, mechanism and relevant action laws of AC loss characteristics in the superconducting linear induction pump transported with three-phase alternating current and under the condition of external background AC field have been found in this article.
- 9 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
Numerical Study of AC Loss Characteristics in a Three-Phase Superconducting Induction Pump
The superconducting induction pump is a pumping system which moves electro-conductive liquids by using electromagnetism. It has the potential to be applied as the pumping system for submarine propulsion and nuclear fission reactors. Since alternating current may generate more heat in the superconducting winding, it is extremely essential to analyze the AC loss characteristics of the pumping system to avoid quenching phenomenon. In this article, a 2D-axisymmetric model of an annular linear induction pump which is composed of superconducting coils has been established by using T-A formulation. AC loss of superconducting coils under self-field with three-phase alternating current and external alternating magnetic field have been studied. Meanwhile, the influence of some essential parameters such as the transmission current, coil turns have been analyzed as well. Results show that the arrangement position of coils in the pump plays an important role in determining the AC loss of superconducting winding. Meanwhile, self-field of the superconducting coils seems to have larger influence on the AC loss characteristics than external alternating field. In conclusion, mechanism and relevant action laws of AC loss characteristics in the superconducting linear induction pump transported with three-phase alternating current and under the condition of external background AC field have been found in this article.
- Open Access
Thermal Hydraulics Analysis of the Distribution Zone in Small Modular Dual Fluid Reactor
The Small Modular Dual Fluid Reactor (SMDFR) is a novel molten salt reactor based on the dual fluid reactor concept, which employs molten salt as fuel and liquid lead/lead-bismuth eutectic (LBE) as coolant. A unique design of this reactor is the distribution zone, which locates under the core and joins the core region with the inlet pipes of molten salt and coolant. Since the distribution zone has a major influence on the heat removal capacity in the core region, the thermal hydraulics characteristics of the distribution zone have to be investigated. This paper focuses on the thermal hydraulics analysis of the distribution zone, which is conducted by the numerical simulation using COMSOL Multiphysics with the CFD (Computational Fluid Dynamics) module and the Heat Transfer module. The energy loss and heat exchange in the distribution zone are also quantitatively analyzed. The velocity and temperature distributions of both molten salt and coolant at the outlet of the distribution zone, as inlet of the core region, are produced. It can be observed that the outlet velocity profiles are proportional in magnitude to the inlet velocity ones with a similar shape. In addition, the results show that the heat transfer in the center region is enhanced due to the velocity distribution, which could compensate the power peak and flatten the temperature distribution for a higher power density.
Open AccessThermal Hydraulics Analysis of the Distribution Zone in Small Modular Dual Fluid Reactor
The Small Modular Dual Fluid Reactor (SMDFR) is a novel molten salt reactor based on the dual fluid reactor concept, which employs molten salt as fuel and liquid lead/lead-bismuth eutectic (LBE) as coolant. A unique design of this reactor is the distribution zone, which locates under the core and joins the core region with the inlet pipes of molten salt and coolant. Since the distribution zone has a major influence on the heat removal capacity in the core region, the thermal hydraulics characteristics of the distribution zone have to be investigated. This paper focuses on the thermal hydraulics analysis of the distribution zone, which is conducted by the numerical simulation using COMSOL Multiphysics with the CFD (Computational Fluid Dynamics) module and the Heat Transfer module. The energy loss and heat exchange in the distribution zone are also quantitatively analyzed. The velocity and temperature distributions of both molten salt and coolant at the outlet of the distribution zone, as inlet of the core region, are produced. It can be observed that the outlet velocity profiles are proportional in magnitude to the inlet velocity ones with a similar shape. In addition, the results show that the heat transfer in the center region is enhanced due to the velocity distribution, which could compensate the power peak and flatten the temperature distribution for a higher power density.