Fuqiang Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fuqiang Gao has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
Hongpu Kang
CCTEG Coal Mining Research Institute Beijing China
12 shared publicationsShuangyong Dong
Coal Mining Research Institute, CCTEG, Beijing, China
10 shared publicationsWenju Liu
Coal Mining Research Institute, China Coal Technology and Engineering Group, Beijing, China
9 shared publications- Rui Wu
CCTEG Coal Mining Research Institute Beijing China
8 shared publications Xiaoqing Wang
8 shared publicationsGuiyang Yuan
Coal Mining Research Institute, CCTEG, Beijing, China
7 shared publications
Latest Publications
- Open Access
- 11 September 2026
- Published by Springer Nature in GeoEnergy Communications
- Vol. 2 (1) , 13
Coupled hydromechanical responses around a roadway excavation in inclined coal–mudstone strata
We conduct a numerical investigation into the spatio-temporal evolution of excavation-induced disturbances around roadways in inclined coal–mudstone strata containing fracture networks. The intact rock is modeled using a Mohr–Coulomb plastic constitutive law to capture deformation and failure, while the displacement of pre-existing fractures is governed by a nonlinear stress–displacement relationship in both normal and shear directions. Fluid migration through the fractured porous medium is described by Darcy’s law, and hydromechanical coupling is incorporated to account for stress redistribution, pore pressure variation, plasticity development, and fracture deformation during excavation. The simulations demonstrate that the in-situ stress ratio exerts a primary control over the magnitude and extent of excavation-induced responses, with higher stress ratios intensifying plastic yielding, shear stress concentration, and fracture slip. The dip angle of strata further influences failure patterns, as inclined formations facilitate failure localization along coal–mudstone interfaces, progressively shifting the disturbance behavior from mechanically-dominated to structurally-controlled regimes. In addition, excavation-induced stress redistribution produces rapid pore pressure transients in the low-permeability matrix, which in turn promote fracture shear activation and rock damage. These findings highlight the critical role of coupled hydromechanical processes in excavation-induced rock mass responses, with important implications for improving roadway stability and excavation design in various underground engineering applications.
- 11 September 2026
- Published by Springer Nature in GeoEnergy Communications
- Vol. 2 (1) , 13
Open AccessCoupled hydromechanical responses around a roadway excavation in inclined coal–mudstone strata
We conduct a numerical investigation into the spatio-temporal evolution of excavation-induced disturbances around roadways in inclined coal–mudstone strata containing fracture networks. The intact rock is modeled using a Mohr–Coulomb plastic constitutive law to capture deformation and failure, while the displacement of pre-existing fractures is governed by a nonlinear stress–displacement relationship in both normal and shear directions. Fluid migration through the fractured porous medium is described by Darcy’s law, and hydromechanical coupling is incorporated to account for stress redistribution, pore pressure variation, plasticity development, and fracture deformation during excavation. The simulations demonstrate that the in-situ stress ratio exerts a primary control over the magnitude and extent of excavation-induced responses, with higher stress ratios intensifying plastic yielding, shear stress concentration, and fracture slip. The dip angle of strata further influences failure patterns, as inclined formations facilitate failure localization along coal–mudstone interfaces, progressively shifting the disturbance behavior from mechanically-dominated to structurally-controlled regimes. In addition, excavation-induced stress redistribution produces rapid pore pressure transients in the low-permeability matrix, which in turn promote fracture shear activation and rock damage. These findings highlight the critical role of coupled hydromechanical processes in excavation-induced rock mass responses, with important implications for improving roadway stability and excavation design in various underground engineering applications.
- Open Access
- 17 April 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (8)
Adsorption Preceding Wetting Front Controls Seismic Velocity
Rock elasticity varies with both humidity and water saturation, yet their combined effects remain poorly understood, although in nature vapor adsorption and liquid infiltration occur simultaneously. Here, we present experimental data of P‐wave velocity and volume expansion in a free‐standing sandstone subject to progressive wetting. Elastic softening, evidenced by P‐wave velocity reduction, precedes the wetting front, followed by stiffening as liquid infiltration reverses this trend. To reconcile these softening/stiffening behaviors, vapor migration ahead of the wetting front is captured by numerical simulation of moisture transport constrained by experimental data. Initial softening is explained by a micromechanical model governed by surface energy reduction at grain contacts and validated by independent vapor adsorption tests. Subsequent stiffening is attributed to water infiltration, consistent with patchy saturation theory. We propose softening and stiffening are transitional processes governed by the advancing wetting front, with implications for seismic imaging of progressive wetting processes in crustal rocks.
- 17 April 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (8)
Open AccessAdsorption Preceding Wetting Front Controls Seismic Velocity
Rock elasticity varies with both humidity and water saturation, yet their combined effects remain poorly understood, although in nature vapor adsorption and liquid infiltration occur simultaneously. Here, we present experimental data of P‐wave velocity and volume expansion in a free‐standing sandstone subject to progressive wetting. Elastic softening, evidenced by P‐wave velocity reduction, precedes the wetting front, followed by stiffening as liquid infiltration reverses this trend. To reconcile these softening/stiffening behaviors, vapor migration ahead of the wetting front is captured by numerical simulation of moisture transport constrained by experimental data. Initial softening is explained by a micromechanical model governed by surface energy reduction at grain contacts and validated by independent vapor adsorption tests. Subsequent stiffening is attributed to water infiltration, consistent with patchy saturation theory. We propose softening and stiffening are transitional processes governed by the advancing wetting front, with implications for seismic imaging of progressive wetting processes in crustal rocks.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Hygroscopic weakening accelerates the transition to catastrophic failure during brittle creep in clastic rocks
Understanding how water influences slow fracture growth in rocks remains a major gap in our ability to predict time-dependent failure. In particular, it is still unclear how moisture-related weakening push a subcritically stressed rock from stable deformation into sudden collapse.In this study, we investigate how hygroscopic weakening—caused by liquid water entering a notch—affects the creep behavior of a clastic rock loaded below its short-term strength. Using a sandstone beam (400 mm×90 mm×90 mm) in an inverted three-point bending setup, we first load the sample to about 67% of its failure strength more than 5 days, then introduce a controlled water drip directly into the notch.We track the fracture response using digital image correlation, ultrasonic transmission, acoustic emission, and crack-opening measurements. The results show two distinct stages after water arrives:a rapid increase in crack opening and loss of stiffness, consistent with moisture-driven softening; anda slower but sustained rise in microcracking activity, leading to accelerated creep and, in some cases, catastrophic failure.In contrast, identical dry beams remain stable over several days, confirming that water—not load alone—initiates the transition to instability.These findings demonstrate that even small amounts of liquid water can sharply alter the long-term mechanical stability of brittle stressed rocks. This work highlights a potential pathway through which more frequent or intense wetting events could increase the likelihood of sudden rock failure in natural and engineered settings.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessHygroscopic weakening accelerates the transition to catastrophic failure during brittle creep in clastic rocks
Understanding how water influences slow fracture growth in rocks remains a major gap in our ability to predict time-dependent failure. In particular, it is still unclear how moisture-related weakening push a subcritically stressed rock from stable deformation into sudden collapse.In this study, we investigate how hygroscopic weakening—caused by liquid water entering a notch—affects the creep behavior of a clastic rock loaded below its short-term strength. Using a sandstone beam (400 mm×90 mm×90 mm) in an inverted three-point bending setup, we first load the sample to about 67% of its failure strength more than 5 days, then introduce a controlled water drip directly into the notch.We track the fracture response using digital image correlation, ultrasonic transmission, acoustic emission, and crack-opening measurements. The results show two distinct stages after water arrives:a rapid increase in crack opening and loss of stiffness, consistent with moisture-driven softening; anda slower but sustained rise in microcracking activity, leading to accelerated creep and, in some cases, catastrophic failure.In contrast, identical dry beams remain stable over several days, confirming that water—not load alone—initiates the transition to instability.These findings demonstrate that even small amounts of liquid water can sharply alter the long-term mechanical stability of brittle stressed rocks. This work highlights a potential pathway through which more frequent or intense wetting events could increase the likelihood of sudden rock failure in natural and engineered settings.
- Top Cited PapersOpen Access
- 13 January 2026
- Published by Springer Nature in GeoEnergy Communications
- Vol. 2 (1) , 1
Real-time forecasting of brittle rock failure: a robust acoustic emission approach validated on a large experimental dataset
Accurate and real-time forecasting of brittle rock failure remains a major challenge in geotechnical engineering and mining safety. In this study, a novel failure forecasting method based on acoustic emission (AE) monitoring was proposed and validated using a large experimental dataset of 403 sandstone specimens subjected to uniaxial compression. A new early warning indicator, WI b —the b-value change rate per unit time—was developed to capture the frequency and amplitude of b-value fluctuations, which intensify as microcracking evolves toward macroscopic failure. WI b was computed continuously during loading, and a statistically adaptive threshold was established using the evolving mean and standard deviation of WI b . The results demonstrated that WI b consistently escalated before failure in all specimens, with warning signals occurring at loads averaging 76.7% of the ultimate compressive strength. Sensitivity analyses confirmed the robustness of the method across variations in b-value calculation parameters and AE sensor configurations. Importantly, WI b and its threshold were calculated solely from real-time data without requiring knowledge of the full loading path, ensuring practical applicability. The proposed approach offers a physically meaningful and operationally viable solution for real-time rock failure forecasting and has potential for integration into field-scale AE or microseismic monitoring systems.
- 13 January 2026
- Published by Springer Nature in GeoEnergy Communications
- Vol. 2 (1) , 1
Top Cited PapersOpen AccessReal-time forecasting of brittle rock failure: a robust acoustic emission approach validated on a large experimental dataset
Accurate and real-time forecasting of brittle rock failure remains a major challenge in geotechnical engineering and mining safety. In this study, a novel failure forecasting method based on acoustic emission (AE) monitoring was proposed and validated using a large experimental dataset of 403 sandstone specimens subjected to uniaxial compression. A new early warning indicator, WI b —the b-value change rate per unit time—was developed to capture the frequency and amplitude of b-value fluctuations, which intensify as microcracking evolves toward macroscopic failure. WI b was computed continuously during loading, and a statistically adaptive threshold was established using the evolving mean and standard deviation of WI b . The results demonstrated that WI b consistently escalated before failure in all specimens, with warning signals occurring at loads averaging 76.7% of the ultimate compressive strength. Sensitivity analyses confirmed the robustness of the method across variations in b-value calculation parameters and AE sensor configurations. Importantly, WI b and its threshold were calculated solely from real-time data without requiring knowledge of the full loading path, ensuring practical applicability. The proposed approach offers a physically meaningful and operationally viable solution for real-time rock failure forecasting and has potential for integration into field-scale AE or microseismic monitoring systems.
- 6 January 2026
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (8) , 8797-8811
AI-Enhanced Image Processing for Real-Time Brittle Rock Failure Forecasting: Development and Validation Using a Large Experimental Dataset
- 6 January 2026
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (8) , 8797-8811
AI-Enhanced Image Processing for Real-Time Brittle Rock Failure Forecasting: Development and Validation Using a Large Experimental Dataset
- 15 October 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 195
Stationary asperity stress drop during controlled 3D tensile fracture propagation
- 15 October 2025
- Published by Elsevier in International Journal of Rock Mechanics and Mining Sciences
- Vol. 195
Stationary asperity stress drop during controlled 3D tensile fracture propagation
- Open Access
- 21 September 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (18)
Interplay of Loading and Adsorption Controls Elastic Deformation of Clastic and Crystalline Rocks
Rock elasticity varies with both mechanical loading and moisture content. Studies to date have only examined each effect independently, although moisture interactions with pore walls are likely coupled to mechanical stress. Here, we present experimental data specifically collected in sandstone and granite under simultaneous control of cyclic loading alongside ambient humidity approaching saturated vapor. Adsorption can account for 40% reduction in Young's modulus, which reduces to 10% as uniaxial stress increases from below 1 MPa to below the elastic limit. The observation is explained by a micromechanical model linking grain‐scale contact stiffness to pore‐scale vapor adsorption, quantitatively capturing coupled stress‐induced stiffening and adsorption‐induced softening. The coupled behavior is interpreted as adsorption‐induced softening becoming inhibited under greater mechanical loads. Our results suggest the coupled effects are strongest at overburden stresses between 3.3 and 10.6 MPa (140–450 m) in sandstone and 6–30.3 MPa (235–1,200 m) in granite.
- 21 September 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (18)
Open AccessInterplay of Loading and Adsorption Controls Elastic Deformation of Clastic and Crystalline Rocks
Rock elasticity varies with both mechanical loading and moisture content. Studies to date have only examined each effect independently, although moisture interactions with pore walls are likely coupled to mechanical stress. Here, we present experimental data specifically collected in sandstone and granite under simultaneous control of cyclic loading alongside ambient humidity approaching saturated vapor. Adsorption can account for 40% reduction in Young's modulus, which reduces to 10% as uniaxial stress increases from below 1 MPa to below the elastic limit. The observation is explained by a micromechanical model linking grain‐scale contact stiffness to pore‐scale vapor adsorption, quantitatively capturing coupled stress‐induced stiffening and adsorption‐induced softening. The coupled behavior is interpreted as adsorption‐induced softening becoming inhibited under greater mechanical loads. Our results suggest the coupled effects are strongest at overburden stresses between 3.3 and 10.6 MPa (140–450 m) in sandstone and 6–30.3 MPa (235–1,200 m) in granite.
- Open Access
- 13 July 2025
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 11 (1) , 1-24
Evaluating free gas in coal measure sandstones: a hybrid geophysical logging approach
Gas management in underground coal mining remains a critical challenge, particularly with respect to free compressed gas in sandstones within coal measures—a factor less considered in current mining practices. The free gas can quickly escape and migrate into the working face from the roof/floor, complicating its measurement and leading to additional specific gas emissions (SGE). This study proposes a hybrid method that uses geophysical logs to estimate free gas within these sandstone formations under constrained conditions. The method involves parameters derived from empirical models and calibrated with data-driven techniques, along with the 4 log-based indicators for gas presence; its effectiveness was demonstrated through the application in 4 boreholes at a case study coal mine, known for the occurrence of free gas within the sandstone formations. The gas indicators via empirical and analytical methods collectively filtered out 20–100% non-gassy zones on top of gas estimates, meanwhile providing uncertainties to account for the best and worst scenarios. The results suggest the second borehole (BH2) to be notably gassy (0.3–1.0 $${m}^{3}/t$$ at maximum) within its sandstone formations consistent with the general field observations in the area. This hybrid approach offers a valuable enhancement to gas content estimation, enabling a more detailed evaluation of coal measure sandstones, improving gas risk management, and enhancing SGE prediction accuracy for the mining industry.- 13 July 2025
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 11 (1) , 1-24
Open AccessEvaluating free gas in coal measure sandstones: a hybrid geophysical logging approach
Gas management in underground coal mining remains a critical challenge, particularly with respect to free compressed gas in sandstones within coal measures—a factor less considered in current mining practices. The free gas can quickly escape and migrate into the working face from the roof/floor, complicating its measurement and leading to additional specific gas emissions (SGE). This study proposes a hybrid method that uses geophysical logs to estimate free gas within these sandstone formations under constrained conditions. The method involves parameters derived from empirical models and calibrated with data-driven techniques, along with the 4 log-based indicators for gas presence; its effectiveness was demonstrated through the application in 4 boreholes at a case study coal mine, known for the occurrence of free gas within the sandstone formations. The gas indicators via empirical and analytical methods collectively filtered out 20–100% non-gassy zones on top of gas estimates, meanwhile providing uncertainties to account for the best and worst scenarios. The results suggest the second borehole (BH2) to be notably gassy (0.3–1.0 $${m}^{3}/t$$ at maximum) within its sandstone formations consistent with the general field observations in the area. This hybrid approach offers a valuable enhancement to gas content estimation, enabling a more detailed evaluation of coal measure sandstones, improving gas risk management, and enhancing SGE prediction accuracy for the mining industry. - Open Access
- 19 June 2025
- Published by Springer Nature in International Journal of Coal Science & Technology
- Vol. 12 (1) , 1-15
Case study of hydraulic fracturing for coal burst risk mitigation
Coal bursts pose significant safety and operational challenges in deep mining environments, necessitating effective mitigation strategies to address high-stress concentrations and dynamic failure risks. This study evaluated the efficacy of hydraulic fracturing as a preconditioning tool at a longwall face of the Mengcun coal mine with strong coal bursts, Shaanxi Province. The program involved the systematic creation of a fracture network through high-pressure fluid injection, monitored via microseismic arrays, stress measurements, and hydrological sensors. Results demonstrated that hydraulic fracturing effectively redistributed in-situ stresses, reducing high-stress concentrations by up to 30%, lowering the frequency of high-energy microseismic events, and enhancing the stability of fractured zones. However, the presence of unfractured blind spots and interactions with pre-existing faults highlighted the need for optimized well placement and adaptive fracturing designs. These findings underscore the potential of hydraulic fracturing as a critical preconditioning tool in high-stress mining operations, which could provide a framework for improving safety and efficiency in similar geological and operational settings.
- 19 June 2025
- Published by Springer Nature in International Journal of Coal Science & Technology
- Vol. 12 (1) , 1-15
Open AccessCase study of hydraulic fracturing for coal burst risk mitigation
Coal bursts pose significant safety and operational challenges in deep mining environments, necessitating effective mitigation strategies to address high-stress concentrations and dynamic failure risks. This study evaluated the efficacy of hydraulic fracturing as a preconditioning tool at a longwall face of the Mengcun coal mine with strong coal bursts, Shaanxi Province. The program involved the systematic creation of a fracture network through high-pressure fluid injection, monitored via microseismic arrays, stress measurements, and hydrological sensors. Results demonstrated that hydraulic fracturing effectively redistributed in-situ stresses, reducing high-stress concentrations by up to 30%, lowering the frequency of high-energy microseismic events, and enhancing the stability of fractured zones. However, the presence of unfractured blind spots and interactions with pre-existing faults highlighted the need for optimized well placement and adaptive fracturing designs. These findings underscore the potential of hydraulic fracturing as a critical preconditioning tool in high-stress mining operations, which could provide a framework for improving safety and efficiency in similar geological and operational settings.