Rania Rushdy Moussa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rania Rushdy Moussa has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad I. Elshamy
Mechanical Engineering Department, The British University in Egypt, Cairo 11837, Egypt
1 shared publication - Amany Micheal
Architecture Engineering Department, Faculty of Engineering, The British University in Egypt, El Sherouk City, Suez Desert Road, Cairo 11837, Egypt
1 shared publication Amir Ahmed Elgamal
1 shared publication- Ayatallah Raafat
Teaching Assistant, Architectural Engineering Department, Faculty of Engineering, The British University in Egypt, Cairo-Suez Desert Road, El-Shorouk, Cairo, Egypt
1 shared publication - Ayman Hassaan Ahmed Mahmoud
Professor of Architecture Engineering, Architecture Engineering Department, Faculty of Engineering, Cairo University, 12613 Giza, Egypt
1 shared publication Dalia Amer Ali
1 shared publication
Latest Publications
- Open Access
- 2 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (21) , 11158
An Integrated GPRS-Based Decision Framework for Sustainable Retrofitting of Existing Educational Buildings in Hot-Arid Climates: An Egyptian Case Study
Existing educational buildings in hot-arid climates face substantial challenges related to energy demand, resource consumption, and environmental performance. Although the Green Pyramid Rating System (GPRS) provides a nationally adapted framework for sustainable building assessment in Egypt, a methodological gap remains between GPRS assessment criteria and their systematic translation into technically feasible and economically informed retrofit decisions. This study develops an Integrated GPRS Retrofit Decision Framework and an associated GPRS Implementation Matrix to bridge this gap by linking building deficiencies and GPRS requirements with retrofit strategies, quantitative evaluation methods, performance indicators, economic criteria, and implementation priorities. The framework was applied to an existing educational building at the British University in Egypt as a case study. The methodology integrates building assessment, engineering calculations, TRNSYS 18 dynamic thermal simulation, renewable-energy assessment, water- and waste-management analysis, and techno-economic evaluation. The calibrated TRNSYS model achieved an NMBE of +3.2% and a CV(RMSE) of 8.7%. Results indicate that the proposed rooftop photovoltaic system could provide an estimated annual electricity-cost benefit of approximately EGP 365,616.315, with a simple payback period of approximately 4.17 years, while fiberglass envelope insulation reduced simulated cooling demand by approximately 7.97% relative to the baseline. Additional measures, including piezoelectric flooring, water-management interventions, and waste segregation and recycling, provided complementary energy, resource, environmental, and economic benefits. The principal contribution of the study is therefore a structured decision-support methodology that moves beyond conventional GPRS compliance assessment by integrating technical performance, environmental considerations, and economic feasibility into retrofit selection and prioritization. Application to a single educational building demonstrates the framework’s operational applicability; however, further multi-building and post-occupancy validation is required before broader transferability can be established.
- 2 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (21) , 11158
Open AccessAn Integrated GPRS-Based Decision Framework for Sustainable Retrofitting of Existing Educational Buildings in Hot-Arid Climates: An Egyptian Case Study
Existing educational buildings in hot-arid climates face substantial challenges related to energy demand, resource consumption, and environmental performance. Although the Green Pyramid Rating System (GPRS) provides a nationally adapted framework for sustainable building assessment in Egypt, a methodological gap remains between GPRS assessment criteria and their systematic translation into technically feasible and economically informed retrofit decisions. This study develops an Integrated GPRS Retrofit Decision Framework and an associated GPRS Implementation Matrix to bridge this gap by linking building deficiencies and GPRS requirements with retrofit strategies, quantitative evaluation methods, performance indicators, economic criteria, and implementation priorities. The framework was applied to an existing educational building at the British University in Egypt as a case study. The methodology integrates building assessment, engineering calculations, TRNSYS 18 dynamic thermal simulation, renewable-energy assessment, water- and waste-management analysis, and techno-economic evaluation. The calibrated TRNSYS model achieved an NMBE of +3.2% and a CV(RMSE) of 8.7%. Results indicate that the proposed rooftop photovoltaic system could provide an estimated annual electricity-cost benefit of approximately EGP 365,616.315, with a simple payback period of approximately 4.17 years, while fiberglass envelope insulation reduced simulated cooling demand by approximately 7.97% relative to the baseline. Additional measures, including piezoelectric flooring, water-management interventions, and waste segregation and recycling, provided complementary energy, resource, environmental, and economic benefits. The principal contribution of the study is therefore a structured decision-support methodology that moves beyond conventional GPRS compliance assessment by integrating technical performance, environmental considerations, and economic feasibility into retrofit selection and prioritization. Application to a single educational building demonstrates the framework’s operational applicability; however, further multi-building and post-occupancy validation is required before broader transferability can be established.
- 30 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Construction Materials
- p. 1-13
Building with waste: performance of concrete incorporating organic fibres as cement additives
Agricultural waste is rising rapidly, and turning organic residues into construction materials offers a sustainable way to reduce environmental impact. This study examines concrete mixtures enhanced with mechanically treated date palm mesh (PM) and sugarcane bagasse (SCB) fibres. Sixty samples were prepared with fibre contents of 0%, 0.4%, 0.6%, and 0.8% by mass, were tested for slump, unit weight, absorption, compressive, flexural and tensile strength, and thermal conductivity. Increasing fibre content reduced workability, with slump values dropping from 175 mm in the control mix to 10 mm in PM 6. Unit weight remained between 2.2 and 2.44 g/cm3, while palm mesh helped reduce the water absorption to 5.8 kg/m³. The PM 8 mix achieved the highest compressive strength of 33.69 MPa, outperforming the 22.93 MPa control. Flexural and tensile strengths peaked at 6.6 and 3.22 MPa in the PM 6 mix. Thermal conductivity also improved, decreasing from 6.4°C in the control to 5.0°C in PM 6, indicating better insulation. Overall, adding 0.6–0.8% palm mesh fibres significantly enhanced concrete strength, durability, and thermal performance, positioning these fibres as an effective sustainable option for construction in hot climates.
- 30 June 2026
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Construction Materials
- p. 1-13
Building with waste: performance of concrete incorporating organic fibres as cement additives
Agricultural waste is rising rapidly, and turning organic residues into construction materials offers a sustainable way to reduce environmental impact. This study examines concrete mixtures enhanced with mechanically treated date palm mesh (PM) and sugarcane bagasse (SCB) fibres. Sixty samples were prepared with fibre contents of 0%, 0.4%, 0.6%, and 0.8% by mass, were tested for slump, unit weight, absorption, compressive, flexural and tensile strength, and thermal conductivity. Increasing fibre content reduced workability, with slump values dropping from 175 mm in the control mix to 10 mm in PM 6. Unit weight remained between 2.2 and 2.44 g/cm3, while palm mesh helped reduce the water absorption to 5.8 kg/m³. The PM 8 mix achieved the highest compressive strength of 33.69 MPa, outperforming the 22.93 MPa control. Flexural and tensile strengths peaked at 6.6 and 3.22 MPa in the PM 6 mix. Thermal conductivity also improved, decreasing from 6.4°C in the control to 5.0°C in PM 6, indicating better insulation. Overall, adding 0.6–0.8% palm mesh fibres significantly enhanced concrete strength, durability, and thermal performance, positioning these fibres as an effective sustainable option for construction in hot climates.
- Open Access
- 9 December 2025
- Published by Elsevier in Ain Shams Engineering Journal
- Vol. 17 (1)
Advancing sustainable CO2 mitigation: Experimental and computational analysis of thermal carbon chitosan sorbent for automotive exhaust capture
- 9 December 2025
- Published by Elsevier in Ain Shams Engineering Journal
- Vol. 17 (1)
Open AccessAdvancing sustainable CO2 mitigation: Experimental and computational analysis of thermal carbon chitosan sorbent for automotive exhaust capture
- Open Access
Thermal Performance Variations of Office Spaces in Educational Buildings Resulting from Façade Orientation: An Egyptian Case Study
This paper investigates the thermal performance of an office floor within the Faculty of Engineering at the British University in Egypt (BUE), located in Cairo, a city characterized by a hot arid climate. The study focuses on understanding the building’s thermal behavior by comparing two identical office rooms: Room 212 (north-facing) and Room 201 (south-facing). Utilizing dynamic thermal simulations with TRNSYS 18 for a full year, the research specifically analyzes the impact of these opposite orientations on indoor space temperature, total cooling loads, the monthly heat absorbed by various building surfaces, and the heat absorbed per unit area for each surface. The findings reveal significant disparities in thermal performance, particularly in terms of heat gain and cooling demand, directly attributable to orientation. This research highlights the critical role of facade orientation in mitigating radiative heat absorption and reducing energy consumption in educational buildings within hot climates, providing valuable insights for optimizing building design strategies to enhance thermal comfort and energy efficiency.
Open AccessThermal Performance Variations of Office Spaces in Educational Buildings Resulting from Façade Orientation: An Egyptian Case Study
This paper investigates the thermal performance of an office floor within the Faculty of Engineering at the British University in Egypt (BUE), located in Cairo, a city characterized by a hot arid climate. The study focuses on understanding the building’s thermal behavior by comparing two identical office rooms: Room 212 (north-facing) and Room 201 (south-facing). Utilizing dynamic thermal simulations with TRNSYS 18 for a full year, the research specifically analyzes the impact of these opposite orientations on indoor space temperature, total cooling loads, the monthly heat absorbed by various building surfaces, and the heat absorbed per unit area for each surface. The findings reveal significant disparities in thermal performance, particularly in terms of heat gain and cooling demand, directly attributable to orientation. This research highlights the critical role of facade orientation in mitigating radiative heat absorption and reducing energy consumption in educational buildings within hot climates, providing valuable insights for optimizing building design strategies to enhance thermal comfort and energy efficiency.
- Open Access
- 1 August 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1530 (1)
A Green Concrete Mixture Using Rice Husk As Partially Cement Replacement
Egypt’s agricultural waste production has increased significantly in recent decades, leading to improper disposal methods and environmental pollution. Rice husks are the most common agricultural solid waste in Egypt, contributing to “black clouds” and causing health issues. On the other hand, Cement, a crucial component of construction materials, generates unsound residues and greenhouse gas emissions. Green concrete with rice husks could be a profitable solution for environmentally sound construction, reducing cement consumption and increasing the durability and integrity of new materials. This study investigates the use untreated rice husk fibres with a concrete mixture, avoiding burning and contributing to environmental pollution. Experimental work involved partial substitution of cement with rice husks in 4%, 6%, and 8%. The results showed that partially replacing cement with 4% untreated rice husk preserved reasonable compressive strength of 16.11 MP, improved thermal insulation by reducing thermal conductivity by 2.69%, and lowered production costs by 2.25%.
- 1 August 2025
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1530 (1)
Open AccessA Green Concrete Mixture Using Rice Husk As Partially Cement Replacement
Egypt’s agricultural waste production has increased significantly in recent decades, leading to improper disposal methods and environmental pollution. Rice husks are the most common agricultural solid waste in Egypt, contributing to “black clouds” and causing health issues. On the other hand, Cement, a crucial component of construction materials, generates unsound residues and greenhouse gas emissions. Green concrete with rice husks could be a profitable solution for environmentally sound construction, reducing cement consumption and increasing the durability and integrity of new materials. This study investigates the use untreated rice husk fibres with a concrete mixture, avoiding burning and contributing to environmental pollution. Experimental work involved partial substitution of cement with rice husks in 4%, 6%, and 8%. The results showed that partially replacing cement with 4% untreated rice husk preserved reasonable compressive strength of 16.11 MP, improved thermal insulation by reducing thermal conductivity by 2.69%, and lowered production costs by 2.25%.
- Open Access
- 21 July 2025
- Published by Springer Nature in Research Square
Using Thermally Activated Building Systems for indoor thermal comfort in hot arid regions
This research investigates the efficiency of using embedded cool water pipes to achieve indoor thermal comfort in hot arid regions. The analysis investigates their use in different building components, including the external walls and roof, and in three climatic regions in Egypt. Four simulation scenarios were developed using TRNSYS software to identify the best system that can be applied in each region. The analysis was applied during the summer season, and the result revealed that the system has reduced the indoor temperature in the three mentioned locations. Nevertheless, when compared to the recommendations of ASHRAE Standard 55, the thermal comfort has been validated in two cities (Cairo and Marsa Matrouh) with significantly moderate temperature but not in Aswan which is characterized by its high temperature. This indicates the efficiency of using embedded cool water pipe systems to reduce cooling loads during summer season in hot arid climates but necessitates the importance of testing by simulations to stand on its suitability under different weather conditions.
- 21 July 2025
- Published by Springer Nature in Research Square
Open AccessUsing Thermally Activated Building Systems for indoor thermal comfort in hot arid regions
This research investigates the efficiency of using embedded cool water pipes to achieve indoor thermal comfort in hot arid regions. The analysis investigates their use in different building components, including the external walls and roof, and in three climatic regions in Egypt. Four simulation scenarios were developed using TRNSYS software to identify the best system that can be applied in each region. The analysis was applied during the summer season, and the result revealed that the system has reduced the indoor temperature in the three mentioned locations. Nevertheless, when compared to the recommendations of ASHRAE Standard 55, the thermal comfort has been validated in two cities (Cairo and Marsa Matrouh) with significantly moderate temperature but not in Aswan which is characterized by its high temperature. This indicates the efficiency of using embedded cool water pipe systems to reduce cooling loads during summer season in hot arid climates but necessitates the importance of testing by simulations to stand on its suitability under different weather conditions.
- Open Access
- 25 April 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Integrating renewable energy devices with streetscape elements to electrify the Egyptian roads
The high percentage of carbon emissions, which leads to various environmental problems such as air pollution and global warming, is one of the critical issues resulting from the growth of cities. International agreements are being established to prevent these negative effects. Non-renewable resources are also being depleted and may become extinct in future generations. Due to the extensive use of fossil fuels by automobiles, data show that the transportation sector is responsible for roughly a quarter of worldwide carbon emissions. On the other hand, in developing nations, energy is scarce in many neighborhoods and districts because the governments are unable to meet the community's need for power supply. This research aims to work on techniques that will reduce the carbon emissions produced by roadways while also building environmentally friendly neighborhoods by electrifying the roads using (RE). A novel component called "Energy-Road Scape" (ERS) elements will be used to demonstrate how to generate (RE) and, hence, reduce carbon emissions. This element is the result of integrating streetscape elements with (RE). This research presents a database for ERS elements and properties as a tool for architects and urban designers to design ERS elements instead of utilizing regular streetscape elements.
- 25 April 2023
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Open AccessIntegrating renewable energy devices with streetscape elements to electrify the Egyptian roads
The high percentage of carbon emissions, which leads to various environmental problems such as air pollution and global warming, is one of the critical issues resulting from the growth of cities. International agreements are being established to prevent these negative effects. Non-renewable resources are also being depleted and may become extinct in future generations. Due to the extensive use of fossil fuels by automobiles, data show that the transportation sector is responsible for roughly a quarter of worldwide carbon emissions. On the other hand, in developing nations, energy is scarce in many neighborhoods and districts because the governments are unable to meet the community's need for power supply. This research aims to work on techniques that will reduce the carbon emissions produced by roadways while also building environmentally friendly neighborhoods by electrifying the roads using (RE). A novel component called "Energy-Road Scape" (ERS) elements will be used to demonstrate how to generate (RE) and, hence, reduce carbon emissions. This element is the result of integrating streetscape elements with (RE). This research presents a database for ERS elements and properties as a tool for architects and urban designers to design ERS elements instead of utilizing regular streetscape elements.
- 15 October 2022
- Published by Springer Nature
- p. 496-506
Studding the Benefits of BIM Plugins on the Efficiency of Architecture Practice
- 15 October 2022
- Published by Springer Nature
- p. 496-506
Studding the Benefits of BIM Plugins on the Efficiency of Architecture Practice
- 2 June 2022
- Published by International Information and Engineering Technology Association in International Journal of Sustainable Development and Planning
- Vol. 17 (3) , 885-893
Measuring the Economic Benefits for Reusing Organic Wastes in Generating Gas and Electricity to Create Self-Sustain City
Some cities in the Global South are challenging the adverse effects of accumulating waste, which pollutes the environment and affects public health. This research presents a solution to get rid of organic waste and reuse it to generate energy. The research methods included a two-stream approach of data collection in: a qualitative method of collecting data using a field survey in Egypt and a quantitative way of measuring the amount of energy generated from using anaerobic digesters. The results revealed that anaerobic digester tanks produced 396 more than the gas consumed by the community and covered 3.6% of the electricity needed. The findings compared the energy generated from storing organic waste in anaerobic digester tanks with the power consumed by citizens. The results indicated that Egypt has challenges managing organic waste and needs innovative policies to confront draining a large portion of the local economy and causing environmental hazards.
- 2 June 2022
- Published by International Information and Engineering Technology Association in International Journal of Sustainable Development and Planning
- Vol. 17 (3) , 885-893
Measuring the Economic Benefits for Reusing Organic Wastes in Generating Gas and Electricity to Create Self-Sustain City
Some cities in the Global South are challenging the adverse effects of accumulating waste, which pollutes the environment and affects public health. This research presents a solution to get rid of organic waste and reuse it to generate energy. The research methods included a two-stream approach of data collection in: a qualitative method of collecting data using a field survey in Egypt and a quantitative way of measuring the amount of energy generated from using anaerobic digesters. The results revealed that anaerobic digester tanks produced 396 more than the gas consumed by the community and covered 3.6% of the electricity needed. The findings compared the energy generated from storing organic waste in anaerobic digester tanks with the power consumed by citizens. The results indicated that Egypt has challenges managing organic waste and needs innovative policies to confront draining a large portion of the local economy and causing environmental hazards.
- Open Access
- 24 May 2022
- Published by Elsevier in Cleaner Engineering and Technology
- Vol. 9
The potential of using anaerobic digesters in developing countries
- 24 May 2022
- Published by Elsevier in Cleaner Engineering and Technology
- Vol. 9
Open AccessThe potential of using anaerobic digesters in developing countries