MOMichael O'ROurke

Michael O'ROurke

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael O'ROurke has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Observations of Snow Load Effects on Four School Buildings in New England

    by R. A. Daniel Bass, Michael O’ROurke

    Following the record-breaking 2014–2015 winter snow events in the Greater-Boston and Southern New Hampshire area, the federal emergency management agency (FEMA) building science branch deployed an assessment team to assess building performance of four schools whose roofs had failed and developed conclusions and recommendations about the effects of this snow event based on their observations. This paper summarizes the team’s observations of building damage and structural performance problems caused by localized snow drift loading. FEMA concluded that the observed roof systems were under-designed in comparison to current snow load requirements, which include snow drift loads. The full report, Snow Study Summary Report, Observations of Snow Load Effects on Four School Buildings in New England, may be downloaded here: (http://www.fema.gov/media-library/assets/documents/124838).This paper compares the estimated roof snow loads to the corresponding design loads per American Society of Civil Engineers (ASCE) ASCE 7-10, Minimum Design Loads for Buildings and Other Structures, and recommends future activities such as developing high-level guidance for structural engineers and building owners/operators to mitigate losses resulting from snow loads.


  • Snow Loads on Non-Building Structures

    by Dawar Naqvi, Eric Wey, Michael O'ROurke

    It is not uncommon to have petrochemical facilities such as refineries, natural gas processing facilities and pipe line projects located in cold and arctic regions. The snow and ice considerations of the non-building structures and the components present unique design considerations for engineers. Non-building structures such as pipe bridges, pipe racks, multi level open equipment structures, storage tanks, electrical cable tray, air coolers, and equipment supporting structures retain snow differently than buildings. ASCE 7 does not have specific provisions for snow and ice on non building structures and components. Process Industry Practices (PI) and American Petroleum Institute (API) recommendations do not give comprehensive design procedures or guidelines for calculating snow and ice loads on non-building structures and components. Engineering judgment is used for adapting the snow and ice provisions for buildings to non-building structures. Calculation of the snow and ice loads becomes even more critical if the facility in a high seismic zone due to the added seismic mass. This paper provides recommendations for calculating the snow and ice loads for non-building structures and components based on the knowledge and experience of the authors. Snow loading on specific non-building structures are examined and recommendations based on current industry practices are presented

  • Wave Propagation Damage to Continuous Pipe

    by Michael O'ROurke

    Some mistakenly believe that wave propagation damage to continuous buried pipe does not occur. Although not common, there have been situations in the past where it has occurred. Two such case histories are presented in the paper with the intension of clarifying the issue. The first case history is local buckling damage to 42 inch diameter welded steel water pipe occasioned by R-wave propagation in Mexico City during the 1985 Michoacan earthquake. In this case, the special circumstances which lead to the damage was the very low propagation velocity of the R-waves in the Lake Zone of Mexico City. The second case history is girth weld failures to a 12 inch diameter gas pipeline occasioned by S-wave propagation in Potrero Canyon during the 1994 Northridge earthquake. In this case, the special circumstances which lead to the damage was very strong ground shaking combined with what turned out to be very poor welds.


  • Analytical Fragility Relation for Buried Segmented Pipe

    by Michael O'ROurke

    An analytical fragility relation for seismic damage to segmented pipe is presented. The relation is based upon a simplified mechanistic model with rigid pipe segments and flexible joints, subject to ground strain parallel to the pipeline longitudinal axis. As such it is applicable to both wave propagation and PGD hazards. In the model, ground strain is accommodated by opening of the pipeline joints. That is, the current model considers tensile ground strain only. The results for small diameter cast iron pipe subject to tensile ground strain match the empirical observation (repairs per kilometer) quite well for roughly an order of magnitude of ground strain. It is felt that the current model provides a good starting point for analytical models applicable to other diameters and pipe material as well as all levels of both tensile and compressive seismic ground strains.


  • Mathematical Simulation of 50-Year Snow Drift Loads

    by John Cocca, Michael O'ROurke

    Snow loading on building roofs is an important consideration in the design process in many regions across the United States. It is especially important for buildings that have roof geometries that promote drifting of snow. When snow is transported across the roof of a building to a drift accumulation area, it causes a large concentrated load. Building roofs are more likely to suffer structural damage, or failure, from this large concentrated load rather than from a uniform load acting over the entire roof. Current building code provisions for roof snow drifts have typically been based on reviews of insurance case histories. This methodology considers a drift on a particular building, during the particular year of the insurance claim. As a result, there is no easily determined return period associated with the case history. Hence, the return period for the relationship developed from the case histories is unknown. By using a mathematical procedure to simulate roofsnow drift loads, the maximum annual drift load can be computed for each year over a period of years. From these annual maximums, the return period for a design drift can be estimated. The mathematical procedure is based on the physics of drift formation which involves a transport rate and trapping efficiency. The procedure used to simulate the maximum annual drift for a particular roof during a particular winter involves: (1) determining the amount of "driftable" snow in the roofs snow source area, (2) determining the amount of snow transported from the roof's snow source area based on the winter's wind speed record and transport rate, (3) and finally applying the trapping efficiency to determine the amount of transported snow that is in the drift. The procedure outlined above is applied to each winter's weather data for a period of 19 years at each of 46 weather stations across the United States. The maximum annual drifts from each station are then fit with a Gumbel Distribution to determine the 50- year drift load from each station for both a gable and lee-step roof geometry. These 50- year drift loads are than used to find the 50- year drift ratios, which are compared with the drift ratios for a leeward step and gable roof geometry using the methodology in the ASCE- 7 Load Standard. From this comparison conclusions are made on the accuracy of the current method for calculating drift loads.


  • Soil-Pipeline Interaction Behavior under Strike-Slip Faulting

    by Da Ha, Tarek H. Abdoun, Michael J. O'Rourke

    Permanent ground deformation (PGD) is one of the most damaging hazards for continuous buried lifelines. This hazard is especially severe when the PGD results in net compression in the pipe. In that case, buckling of pipe material can occur. In this paper, centrifuge tests of buried pipelines subject to abrupt ground failure in the form of surface faulting are presented. The fault movement results mainly in compression in the pipe. The test results are compared with a case history of pipe failure in the 1999 Izmit, Turkey earthquake and also with the results from the centrifuge tests which result in net tension in the pipe. The experimental setup, procedures, and instrumentation are described in detail. Suggestions for design practice are offered based on the analysis of results from both the 1999 Izmit case history and the centrifuge modeling.


  • Analytical Simulation of Snow Drift Loading

    by Michael O’rOurke, Arthur DeGaetano, Janine Derjue Tokarczyk

    An analytical procedure for simulating roof snow drift loads is presented. The procedure is based upon the physics of drift formation and consists of two elements. The first element is the transport rate which quantifies the snow flux from the snow source area. The second element is the trapping efficiency which quantifies the percentage of transported snow from the source area which is captured at the drift. Knowing wind speed and snowfall information for a given winter, the procedure can be used to simulate the annual maximum drift for a given snow source area. The method is applied to over 40 years of weather data at each of over 50 NWS first-order sites across the United States. The calculated annual maxima are fit with an extreme value distribution to determine 50-year drift loads for both roof step and gable roof geometries. It is shown that current leeward roof step drift provisions in ASCE 7-02 as well as gable roof drift provisions proposed for ASCE 7-05 yield loads with something close to a 50 y...


  • Rain-on-Snow Surcharge for Roof Design

    by Michael O'ROurke, Chris Downey

    A study of structural loading on gable roofs due to rain falling on an existing roof snowpack is presented. Rain-on-snow provisions in various existing standards are reviewed, and a summary of structural damage in the United States arguably related to rain-on-snow is presented. Three separate approaches are then used to quantify the intensity, duration, and return period for a rain-on-snow event. The first approach is case history information from a 1996/1997 rain-on-snow event (unknown return period). The second is a statistical approach in which the ground snow load plus daily rain with a 50-year return period is determined (unknown intensity and duration of the rain). The third is a two-year return period rain (unknown snow condition). Based upon the resulting roof surcharge loads, revised provisions for the ASCE 7 load standard are suggested. One possible revision is to only require a rain-on-snow surcharge for certain roofs with low slopes and short eave-to-ridge distances. An alternate revision is to simply eliminate the surcharge.